Limits of piriform silk adhesion—similar effects of substrate surface polarity on silk anchor performance in two spider species with disparate microhabitat use

Attachment discs of the diving bell spider Argyroneta aquatica

To adhere their silk threads for the construction of webs and to fix the dragline, spiders produce attachment discs of piriform silk. Uniquely, the aquatic spider Argyroneta aquatica spends its entire life cycle underwater. Therefore, it has to glue its attachment discs to substrates underwater. Here we show that Argyroneta aquatica applies its thread anchors within an air layer around the spinnerets maintained by superhydrophobic setae. During spinning, symmetric movements of the spinnerets ensure retaining air in the contact area. The flat structure of the attachment discs is thought to facilitate fast curing of the piriform adhesive cement and improves the resistance against drag forces. Pull-off tests on draglines connected with attachment discs on different hydrophilic substrates point to dragline rupture as the failure mode. The Young´s modulus of the dragline (8.3 GPa) is within the range as in terrestrial spiders. The shown structural and behavioral adaptations can be the model for new artificial underwater gluing devices.

Feeding mediated web-building plasticity in a cobweb spider

Behavioral plasticity has been proposed as a means by which animals alter their phenotypes in response to changing conditions. Animals may display behavioral plasticity as a consequence of environmental variation. The detritus-based, bell-shaped cobweb spider Campanicola campanulata is an ideal model to study behavioral plasticity, because its web architecture is easy to be quantified, and the functions of different parts of the web are clear. Though the plasticity of cobweb architecture has been reported in a few species, retreats as important defensive structures have rarely been considered before because retreats in most cobwebs are relatively small compared with the web size. We studied the web-building behaviors of C. campanulata under different feeding regimes. We set up 3 spider treatments with different feeding conditions: marginally well fed, moderately well fed, and extremely well fed, and observed the differences in the web architecture among them. In addition, we measured the mechanical properties of anchor silk, and also calculated the foraging and defense investment of the spiders. The results showed that marginally well-fed spiders build cobwebs with significantly longer length of anchor silk, lower retreat to the ground, more number and longer gumfooted lines, and larger capture area, while extremely well-fed spiders build cobwebs with significantly bigger retreat volume and higher height of retreat to the ground. In addition, marginally well-fed spiders invest significantly less during cobweb construction. However, there was no significant difference between the breaking force and elongation at break in anchor silk among different treatments. These results demonstrated that marginally well-fed spiders invest more in foraging, and extremely well-fed spiders invest more in defense, and the spider made a balance between foraging and predator avoidance in response to changes in physiological state. Our study strengthens the current understanding of web construction in cobweb spiders, especially those facing high costs during retreat construction.

Host Plant Specificity in Web-Building Spiders

Spiders are ubiquitous generalist predators playing an important role in regulating insect populations in many ecosystems. Traditionally they have not been thought to have strong influences on, or interactions with plants. However, this is slowly changing as several species of cursorial spiders have been reported engaging in either herbivory or inhabiting only one, or a handful of related plant species. In this review paper, we focus on web-building spiders on which very little information is available. We only find well-documented evidence from studies of host plant specificity in orb spiders in the genus Eustala, which are associated with specific species of swollen thorn acacias. We review what little is known of this group in the context of spider-plant interactions generally, and focus on how these interactions are established and maintained while providing suggestions on how spiders may locate and identify specific species of plants. Finally, we suggest ideas for future fruitful research aimed at understanding how web-building spiders find and utilise specific plant hosts.

Dynamic environments do not appear to constrain spider web building behaviour

Many laboratory experiments demonstrate how orb-web spiders change the architecture of their webs in response to prey, surroundings and wind loading. The overall shape of the web and a range of other web parameters are determined by frame and anchor threads. In the wild, unlike the lab, the anchor threads are attached to branches and leaves that are not stationary but move, which affects the thread tension field. Here we experimentally test the effect of a moving support structure on the construction behaviour and web-parameters of the garden cross spider Araneus diadematus. We found no significant differences in building behaviour between rigid and moving anchors in total time spent and total distance covered nor in the percentage of the total time spent and distance covered to build the three major web components: radials, auxiliary and capture spirals. Moreover, measured key parameters of web-geometry were equally unaffected. These results call for re-evaluation of common understanding of spider webs as thread tensions are often considered to be a major factor guiding the spider during construction and web-operation.

Evolution of silk anchor structure as the joint effect of spinning behavior and spinneret morphology

Spider web anchors are attachment structures composed of the bi-phasic glue-fiber secretion from the piriform silk glands. The mechanical performance of the anchors strongly correlates with the structural assembly of the silk lines, which makes spider silk anchors an ideal system to study the biomechanical function of extended phenotypes and its evolution. It was proposed that silk anchor function guided the evolution of spider web architectures, but its fine-structural variation and whether its evolution was rather determined by changes of the shape of the spinneret tip or in the innate spinning choreography remained unresolved. Here, we comparatively studied the micro-structure of silk anchors across the spider tree of life, and set it in relation to spinneret morphology, spinning behavior and the ecology of the spider. We identified a number of apomorphies in the structure of silk anchors that may positively affect anchor function: 1. bundled dragline, 2. dragline envelope, and 3. dragline suspension ('bridge'). All these characters were apomorphic and evolved repeatedly in multiple lineages, supporting the notion that they are adaptive. The occurrence of these structural features can be explained with changes in the shape and mobility of the spinneret tip, the spinning behavior or both. Spinneret shapes generally varied less than their fine-tuned movements, indicating that changes in construction behavior play a more important role in the evolution of silk anchor assembly. However, the morphology of the spinning apparatus is also a major constraint to the evolution of the spinning choreography. These results highlight changes in behavior as the proximate and in morphology as the ultimate causes of extended phenotype evolution. Further, this research provides a roadmap for future bioprospecting research to design high-performance instant line anchors.

Evolutionary kinematics of spinneret movements for rapid silk thread anchorage in spiders

Many organisms secrete structural materials from their bodies to enhance protection, foraging or signalling. The function of such secretion products can be further extended by their assembly into complex structures, so-called extended phenotypes, such as shells, nests and biofilms. Understanding the variation in the efficacy of such assembly processes could help to explain why extended phenotypes are common on some lineages and rare in others. Here, I comparatively studied the assembly of sticky silk fibres into thread anchorages by the innate 'printing' behaviour in 92 species of spiders from 45 families, representing the so-far largest comparative study of construction-related motion patterns. I found a global evolutionary trend towards a faster production of silk thread anchorages, in both web builders and hunting spiders. The slowest producers of silk anchors belong to a clade with an ancestral configuration of respiratory organs, suggesting that a major constraint to the evolution of spinning speed is the efficiency of oxygen uptake. Motion patterns were found to contain a high phylogenetic signal, but did not correlate with spinning speeds. These results help to explain the variation in diversity and ecological success among the spider fauna and showcase the value of comparative kinematics in biodiversity studies.