Intraoperative soft tissue balance using novel medial preserving gap technique in posterior-stabilized total knee arthroplasty: comparison to measured resection technique

Posterior capsular release around the intercondylar notch increases extension gap without affecting flexion gap in posterior-stabilized total knee arthroplasty

BACKGROUND

In posterior-stabilized (PS) total knee arthroplasty (TKA), joint extension gap decreases after placement of a femoral trial component which causes imbalance between the extension and flexion gaps. Previous studies have demonstrated that capsular release around the intercondylar notch can enlarge the extension gap; however, its impact on the flexion gap is unknown. This study assessed the effect of capsular release around the intercondylar notch on both extension and flexion gaps.

METHODS

This study included 100 patients who underwent PS-TKA, and capsular release was performed intraoperatively to avoid flexion contracture and to balance the extension-flexion gap. We measured the gap and tilting angle with a femoral trial using FuZion™ tensor, applying a joint distraction force of 40 lbs. The differences in gap and tilting angle were assessed before and after capsular release.

RESULTS

The mean center component gap (CG) before and after capsular release was 10.0 mm and 12.5 mm in extension (P < 0.001), 14.1 mm and 14.2 mm in flexion (P = 0.58), respectively. Calculated medial CG before and after capsular release was 9.2 mm and 11.4 mm in extension (P < 0.001), 12.6 mm and 12.7 mm in flexion (P = 0.20), respectively. The average medial CG difference significantly decreased from 3.4 mm to 1.3 mm after release.

CONCLUSION

This study confirmed that capsular release around the intercondylar notch significantly enlarges the extension component gap, while having an insignificant effect on the flexion component gap in PS-TKA.

Intraoperative lateral laxity greater than 4° is associated with inferior functional improvement in posterior-stabilised total knee arthroplasty

PURPOSE

The study aimed to determine the impact of intraoperative lateral laxity at extension on clinical and functional outcomes 1 year after posterior-stabilised total knee arthroplasty (PS-TKA).

METHODS

In total, 91 varus-type osteoarthritic knees that underwent PS-TKA using the medial preservation gap technique were included. After the femoral trial component placement and patellofemoral joint reduction, the soft-tissue balance was assessed using an offset-type tensor with a 40-lb joint-distraction force. Patients were divided into the following three groups according to the intraoperative lateral laxity at extension (i.e., varus ligament balance) using the mean ± 1 standard deviation: Groups A, ≤0°; B, 0-4°; and C, >4°. The 2011 Knee Society Score (KSS) and 3-m timed up-and-go test (TUG) time 1-year postoperatively, and their improvements were compared among the groups.

RESULTS

While significant improvements were observed in all subscales of the 2011 KSS and TUG post-TKA (p < 0.05), the improvement of functional activities and TUG time were significantly lower in Group C than in Group B (p < 0.05). However, no significant differences were observed in symptom improvement, patient satisfaction or patient expectation scores among the groups.

CONCLUSION

An excessive lateral laxity (varus angle) >4° at extension was associated with lower improvement in functional ability 1-year postoperatively. Therefore, excessive intraoperative lateral laxity should be avoided in PS-TKA.

LEVEL OF EVIDENCE

Level IV.

Association of intraoperative medial joint gap laxity in the flexion position with subjective knee instability after fixed-bearing posterior-stabilised total knee arthroplasty

BACKGROUND

Postoperative subjective knee instability is an important clinical outcome after total knee arthroplasty (TKA), however the association with intraoperative soft tissue balance remains unclear. This study aimed to assess the association between intraoperative soft tissue balance and postoperative subjective knee instability in fixed-bearing posterior-stabilised (PS) TKA.

METHODS

This retrospective case-control study included 457 patients who underwent fixed-bearing PS TKA. Intra-articular distraction force was quantitatively applied to measure the gap parameters (length and angle) during surgery. The intraoperative joint gap parameters and postoperative clinical outcomes between the patients with (n = 90) and without (n = 367) subjective knee instability were compared. The risk factors for subjective postoperative knee instability were analysed using multivariate logistic regression analysis.

RESULTS

The patients with subjective knee instability demonstrated a medially wider intra-articular gap angle and worse Knee Society Score 2011 symptoms (18 vs. 21; p < 0.01), satisfaction (27 vs. 30; p < 0.01), functional activity (55 vs. 65; p < 0.01), and Forgotten Joint Score 12 items (51 vs. 65; p < 0.01) than those in the patients without subjective knee instability. The use of measured resection technique (odds ratio, 2.3; 95% CI, 1.1-4.8; p = 0.02) and the medial laxity of joint gap balance in the flexion position (odds ratio, 1.2; 95% CI, 1.0-1.4; p = 0.04) were detected as risk factors for postoperative subjective knee instability.

CONCLUSION

In fixed-bearing PS TKA, intraoperative medial joint laxity in the flexion position was associated with postoperative subjective knee instability, and surgical techniques to achieve sufficient soft tissue balance contributed to improve postoperative subjective clinical outcomes.

LEVEL OF EVIDENCE

Ⅲ (case-control study).

In vivo kinematic comparison of bi-cruciate retaining total knee arthroplasty between mechanical alignment and functional alignment methods

Background/objective

This study aimed to clarify the kinematics of bi-cruciate-retaining (BCR) total knee arthroplasty (TKA) by comparing the mechanical alignment (MA) and functional alignment (FA) methods and to evaluate differences between the two alignment methods.

Methods

The in vivo kinematics of 20 MA TKA and 20 FA TKA knees were investigated under fluoroscopy during squatting using a two-to three-dimensional registration technique. Accordingly, knee flexion angle, axial rotational angle, varus-valgus angle, anteroposterior translation of the medial and lateral low contact points of the femoral component relative to the tibial component and kinematic pathway were evaluated.

Results

No difference in the knee flexion angle was observed between the MA and FA TKA groups. Femoral external rotation was observed in both groups and no significant difference was observed. Significant varus alignment from extension to early flexion range was observed in the FA TKA group. The posterior translation of the medial side was smaller in the FA TKA group than in the MA TKA group. Conversely, no significant difference in the anteroposterior translation of the lateral side was observed. In the kinematic pathway, a medial pivot motion from 0° to 20° of flexion and a lateral pivot motion beyond 20° of flexion were observed in both groups.

Conclusion

During squatting in BCR TKA, the FA TKA group significantly showed varus alignment and smaller posterior translation of the medial side than the MA TKA group from extension to early flexion range.

Effect of posterior capsular release on intraoperative joint gap mismatch in the mid-flexion range during posterior-stabilized total knee arthroplasty

INTRODUCTION

Intraoperative mismatch between extension and mid-flexion joint gaps remains a critical issue in posterior-stabilized total knee arthroplasty (PS-TKA). Posterior capsular release has been found to increase the extension joint gap. However, there is still a lack of robust evidence for the effect of posterior capsular release on the mid-flexion joint gap. The purpose of the present study was to quantify the effect of posterior capsular release on the intraoperative joint gap from extension through 45° mid-flexion to flexion and to clarify how this procedure might affect the improvement of gap mismatch in the mid-flexion 45° range.

MATERIALS AND METHODS

In total, 38 consecutive cases of primary PS-TKA were reviewed. The center, medial, and lateral component gaps from extension to flexion were measured with a tensor device before and after posterior capsular release. The minimal detectable change for joint gap measurement was calculated using two methods, error variance and intra-observer intraclass correlation coefficients. Pre- and post-release joint gap differences were assessed using the paired t-test.

RESULTS

Minimal detectable change was found to be 0.59 mm. At 0° and 10° of flexion, the post-release center, medial, and lateral component gaps were significantly greater than at pre-release. At 45° and 90° and maximum flexion, there were no joint gap differences exceeding the minimal detectable change. The joint gap mismatches between 0° and 10°, and 45°, 90° and maximum flexion were significantly smaller at post-release than those at pre-release with the change values exceeding the minimal detectable change (P < 0.05).

CONCLUSION

Posterior capsular release significantly decreased both joint gap mismatch between extension and 45° mid-flexion, and extension and flexion, showing clinical usefulness in PS-TKA.

Effect of posteromedial vertical capsulotomy with medial collateral ligament liberation on intraoperative medial component gap mismatch between extension and mid-flexion during total knee arthroplasty

PURPOSE

The aim of this study was to quantify the effect of posteromedial vertical capsulotomy on intraoperative component gaps and angles from extension through mid-flexion to flexion during total knee arthroplasty (TKA).

METHODS

In the present study, 47 cases of primary posterior-stabilized TKA using the measured resection technique for varus knee osteoarthritis (hip-knee-ankle angles < 0°) were reviewed. Component gaps and angles at 0°, 10°, 45°, 90°, and maximum flexion were measured intraoperatively, before and after posteromedial vertical capsulotomy. Differences in pre- and post-posteromedial vertical capsulotomy medial and lateral component gaps and angles and medial component gap mismatches among knee flexion angles were assessed using the Wilcoxon signed rank test for two paired samples.

RESULTS

The medial component gaps at 0° and 10° of flexion of post-posteromedial vertical capsulotomy were significantly greater, exceeding the minimal detectable change, than those pre posteromedial vertical capsulotomy (change of the gap after the procedure at 0° of flexion was 0.7 ± 0.7 mm and at 10° of flexion was 0.8 ± 0.8 mm; all P values < 0.05). The medial component gap mismatches between both 0° and 10°, and 45°, 90°, and maximum flexion were significantly smaller post posteromedial vertical capsulotomy than pre posteromedial vertical capsulotomy, with the values of the change exceeding the minimal detectable change (change of the gap mismatch after the procedure: knee flexion at 0° and 45° was - 0.6 ± 0.9 [mm], at 0° and 90° was 0.7 ± 1.0, at 0° and maximum flexion was - 0.6 ± 1.2, at 10° and 45° was - 0.7 ± 0.9, at 10° and 90° was - 0.8 ± 0.9, at 10° and maximum flexion was - 0.7 ± 1.1; all P values < 0.05).

CONCLUSIONS

Posteromedial vertical capsulotomy increased the medial component gaps during knee extension but not during mid-flexion or full flexion during posterior-stabilized TKA. Posteromedial vertical capsulotomy improved mild medial component gap mismatch between extension and mid-flexion and full flexion during posterior-stabilized TKA. Surgeons can consider posteromedial vertical capsulotomy when there is intraoperative constriction of the medial component gap during extension in patients undergoing posterior-stabilized TKA.

Limited medial posterior capsular release increases the intraoperative medial component gap while maintaining the joint varus angle at extension in posterior-stabilized total knee arthroplasty

PURPOSE

There is a lack of robust evidence for the magnitude of the effects of posterior capsular release (PCR) on intraoperative component gaps during total knee arthroplasty (TKA). The purpose of the present study was to quantify and compare the effects of partial versus full PCR on the intraoperative component gaps at various degrees of flexion during posterior-stabilized TKA.

METHODS

Full PCR was performed on 39 consecutive cases (full PCR group), and partial PCR (the medial side up to and including the intercondylar notch) was performed on the subsequent 39 consecutive cases (partial PCR group) during posterior-stabilized TKA using the measured resection technique for varus knee osteoarthritis. Medial component gaps and varus angles at 0°, 10°, 45°, 90°, and a maximum of flexion were measured with a tensor device before and after the PCR. Differences between the two groups in post-release medial component gap increase and post-release joint varus angle increase were assessed using a t test. Pre- to post-release medial component gaps and joint varus angles in each group were compared using a paired samples t test.

RESULTS

In both groups at 0° and 10° of flexion, post-release medial compartment gaps were significantly greater than pre-release gaps (all P < 0.001). At 45°, 90° and maximum flexion, the medial compartment gap increase did not exceed the minimal detectable change in either group. At 0° and 10° of flexion, there was no significant difference in post-release medial compartment gap change between the two groups. In the full PCR group, post-release joint varus angles at 0° of flexion were significantly greater than pre-release angles (P < 0.001), while there was no significant pre- and post-release difference in the partial PCR group. The change in post-release joint varus angles at 0° of flexion was significantly greater in the full PCR group than in the partial PCR group.

CONCLUSION

Both full and partial PCR show similar clinical usefulness for increasing the medial component gap at extension and reducing component gap mismatch. A partial PCR can be used to avoid increasing joint varus angles at 0° of flexion.

LEVEL OF EVIDENCE

Level 2 (prospective comparative study).

Effect of mediolateral gap difference on postoperative outcomes in navigation-assisted total knee arthroplasty using an ultracongruent insert and the medial stabilising technique

PURPOSE

This study was aimed to compare the clinical, functional, and radiographic outcomes between symmetric and asymmetric extension and mediolateral gap balance after navigation-assisted (NA) total knee arthroplasty (TKA) using ultracongruent (UC) insets and the medial stabilising technique (MST).

METHODS

In all, 363 knees of 275 patients who underwent mechanical alignment-target NA TKA with MST between January 2015 and December 2017 were analysed. Patients were divided into balanced (extension mediolateral gap difference ≤ 2 mm) and tight medial (difference ≥ 3 mm) groups. Pre- and postoperative clinical, functional (range of motion, Western Ontario and McMaster University Osteoarthritis [WOMAC] index, Knee Society Knee Score [KSKS], and Knee Society Function Score [KSFS]) and radiographic (hip-knee-ankle [HKA] angle, femoral condylar offset, extension angle [a minus indicates hyperextension], and joint line distance) outcomes were compared between the groups. Student's t- or Chi-squared test was used to compare the outcomes.

RESULTS

Among the 363 knees analysed, 279 (77%) were assigned to the balanced group and 84 (23%) to the tight medial group. The preoperative HKA angle was significantly greater in the tight medial group than in the balanced group (9.7° ± 4.1° vs 14.3° ± 4.7°, P < 0.001). The postoperative WOMAC index, KSKS, and KSFS were similar between the groups. The change in the joint line distance was not significantly different (1.5 ± 3.7 vs 2.0 ± 3.3; n.s).

CONCLUSION

The clinical, functional, and radiographic outcomes, including joint line distance, were comparable between the tight medial and balanced group after mechanical alignment-targeted UC TKA with MST.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Medial Soft Tissue-Preserving Technique Impact on Sagittal Stability in Bi-cruciate Stabilized Total Knee Arthroplasty

Background

Sagittal stability in total knee arthroplasty is achieved through complex processes enabled by prosthetic design and intraoperative soft tissue balancing. This study investigated the effects of preserving medial soft tissue on sagittal stability in bicruciate stabilized total knee arthroplasty (BCS TKA).

Method

This retrospective study included 110 patients who underwent primary BCS TKA. The patients were divided into two groups: 44 TKAs were performed releasing medial soft tissue (CON group), and 66 TKAs were performed preserving medial soft tissue (MP group). We assessed joint laxity using tensor device and anteroposterior translation immediately after surgery using the arthrometer at 30° knee flexion. Propensity score matching (PSM) was performed according to preoperative demographic and intraoperative medial joint laxity, and further comparisons between the two groups were performed.

Result

After PSM analysis, medial joint laxity in the mid-flexion range tended to be smaller in the MP group than in the CONT group, with a significant difference at 60 degrees (CON group: - 0.2 ± 0.9 mm, MP group: 0.8 ± 1.3 mm, P < 0.05). Anteroposterior translation was significantly different between the two cohorts (CON group: 11.6 ± 2.5 mm, MP group: 8.0 ± 3.1 mm, P < 0.001).

Conclusion

This study demonstrated the effects of preserving medial soft tissue on postoperative sagittal stability in BCS TKA. We concluded that this surgical procedure enhances postoperative sagittal stability in the mid-flexion range in BCS TKA.

Knee Stability following Posterior-Stabilized Total Knee Arthroplasty: Comparison of Medial Preserving Gap Technique and Measured Resection Technique

Novel medial preserving gap technique (MPGT) focuses on medial compartment stability and allows lateral physiological laxity. This study aimed to compare the MPGT with the measured resection technique (MRT) to determine which provides better postoperative knee stability after posterior-stabilized total knee arthroplasty (PS-TKA). Primary PS-TKA, using either MPGT (n = 65) or MRT (n = 65), was performed in 130 patients with varus knee osteoarthritis. Postoperative knee stabilities at extension and flexion were assessed using varus-valgus stress radiographs and stress epicondylar view, respectively (at 1 month, 6 months, 1 year, and 3 years postoperatively). The distance between the femoral prosthesis and polyethylene insert was measured on each medial and lateral side, defined as the medial joint opening (MJO) and lateral joint opening (LJO), respectively. Decreasing MJO or LJO translated to increasing postoperative stability. The femoral external rotation angle was compared between the two surgical techniques; postoperative knee stability was also compared between the medial and lateral compartments, as well as the surgical techniques. A significant difference was found in the femoral external rotation angle between MPGT (4.2 ± 0.2 degrees) and MRT (3.6 ± 0.1 degrees, p < 0.01). Postoperative MJOs both at extension and flexion were significantly smaller than LJOs using MPGT and MRT at all time points (p < 0.05). MJOs and LJOs at extension using MPGT were significantly smaller than those when using MRT, at 1 and 3 years postoperatively (p < 0.05). Furthermore, MJOs at flexion using MPGT were significantly smaller than those when using MRT at 6 months, 1 year, and 3 years postoperatively (p < 0.05). MPGT provided higher postoperative medial knee stability than MRT both at extension and flexion, even at 3 years after PS-TKA. This suggests that this newly developed surgical technique is a more feasible option than MRT for the preservation of postoperative medial knee stability.

Medial osteophyte resection width correlates with correction of the medio-lateral component gap imbalance during posterior-stabilized total knee arthroplasty

BACKGROUND

There is a lack of robust evidence for a correlation between the medial osteophyte resection and correction of the medio-lateral gap imbalance during total knee arthroplasty. The purpose of the present study was to quantify the effect of osteophyte resection on the medio-lateral component gap imbalance during posterior-stabilized total knee arthroplasty.

METHODS

Forty-five cases of primary posterior-stabilized total knee arthroplasty using the measured resection technique with posterior-stabilized prosthesis for varus knee osteoarthritis were reviewed. Medial and lateral joint gaps at 0°, 10°, 45°, and 90° of flexion, and maximum flexion were measured intraoperatively before and after the osteophyte resection. The relationship between medial osteophyte resection width and change of joint varus angle and medial component gap were assessed using Pearson's correlation coefficient.

FINDINGS

Medial component gap and joint varus angle values at post medial osteophyte resection were significantly larger and lower than at pre-resection (Medial gap: pre 9.5 ± 1.8 mm, post 10.3 ± 1.8 mm, P < 0.001, Joint angle: pre 5.2 ± 2.9°, post 4.2 ± 2.9°, P < 0.001). There was no significant difference between pre and post medial osteophyte resection in lateral component gaps. Per each 1 mm of medial osteophyte resection width, increases of 0.13 mm medial component gap and 0.2° valgus were observed (Medial gap: r = 0.38, P < 0.001, Joint angle: r = 0.38, P < 0.001).

INTERPRETATION

Medial osteophyte resection increases the medial component gap without lateral component gap increase, while decreasing the joint varus angle in primary posterior-stabilized total knee arthroplasty for varus knee osteoarthritis. Osteophyte resection width was found to correlate with correction of the medio-lateral component gap imbalance.

The Association between In Vivo Knee Kinematics and Patient-Reported Outcomes during Squatting in Bicruciate-Stabilized Total Knee Arthroplasty

Bicruciate-stabilized total knee arthroplasty (BCS TKA) has been developed to improve TKA kinematic performance. However, the relationship between in vivo kinematics and patient-reported outcomes (PROs) has not been well described. This study was performed to clarify the relationship between in vivo kinematics and PROs in a cohort of patients undergoing BCS TKA. Forty knees were evaluated using a two-dimensional to three-dimensional registration technique obtained from sagittal plane fluoroscopy. In vivo kinematics including anteroposterior (AP) translation and tibiofemoral rotation were evaluated. Knee Society scores (KSSs) and Knee injury and Osteoarthritis Outcome Scores (KOOSs) were assessed before and after surgery. Relationships between tibiofemoral kinematics assessed with the knee in different positions of knee flexion and PROs were evaluated using Spearman's correlation analysis. The study demonstrated a significant negative correlation (r =  - 0.33) between medial AP translation from minimum flexion to 30 degrees flexion and postoperative KOOS activities of daily living subscale. A significant positive correlation (r = 0.51) was found between the femoral external rotation from minimum flexion to 30 degrees flexion and improvement of the KOOS pain subscale. No correlation was found between the lateral AP translation and PROs. Achieving medial AP and femoral external rotation stability in early flexion may be important in optimizing postoperative PROs.

Influence of Patella Position on Soft Tissue Balance and Clinical Outcomes in Patients Undergoing Minimally Invasive Total Knee Arthroplasty, a Randomized Clinical Trial

Background

We hypothesized that subluxating patellar during minimally invasive total knee arthroplasty (MIS-TKA) would affect intraoperative soft tissue balance and postoperative clinical outcome.

Methods

From December 2018 to May 2020, 189 patients receiving primary MIS-TKA were enrolled. The gap-balance technique was used, with patients randomly assigned to undergo osteotomy and balance of soft tissue with patella reduced (group A; n = 93) or subluxated (group B; n = 96). The gap and varus?valgus angle were compared between groups in both extension and flexion position. The gap and varus?valgus angle were also compared before and after reducing patellar in group B. Femoral prosthesis rotation, mechanical femoral axis–to–tibial axis angle, Knee Society Score (KSS), visual analog scale (VAS), and range of motion (ROM) were compared postoperatively between two groups. Follow-up was 12 months.

Results

The flexion gap and the varus angle were significantly greater (0.4 mm and 0.7 degree) after patella reduction than before reduction, but the extension joint gap and varus angle were comparable before and after patella reduction. The femoral prosthesis tended to be internally rotated (0.65 degree) in group B. ROM and VAS was better in the group A than in group B at 1 month after surgery, but the differences were not significant at 3, 6 and 12 months. KSS was comparable between the groups after surgery.

Conclusions

During MIS-TKA, as far as possible, soft tissue balance should be achieved with the patella reduced; otherwise, the femoral prosthesis may be installed more internally and, after patella reduction, the flexion gap and varus angle would increase.

Clinical Trial Registration

Current Controlled Trials ChiCTR2000034106, https://www.chictr.org.cn/hvshowproject.aspx?id=39987.

Navigation-based analysis of associations between intraoperative joint gap and mediolateral laxity in total knee arthroplasty

BACKGROUND

No data have demonstrated how joint gap measured under a distraction force is actually associated with mediolateral laxity evaluated under a varus-valgus force during total knee arthroplasty (TKA). This study aimed to investigate the correlations between them using a navigation system.

METHODS

A total of 113 primary navigated TKAs were included. After bone resection and soft-tissue balancing, the component gap was measured with a distraction force of 60 N and 80 N for both the medial and lateral compartment (i.e. a total of 120 N and 160 N) at 0°, 10°, 30°, 60°, 90°, and 120° knee flexion. After the final prosthetic implantation and capsule closure, mediolateral laxity under a maximum varus-valgus stress was recorded with image-free navigation at each knee flexion angle. The correlation between joint gap laxity (total differences between component gap and insert thickness in the medial and lateral compartment) and mediolateral laxity was analyzed using Spearman's rank correlation coefficient.

RESULTS

The joint gap laxity under both distraction forces showed significant positive correlations with mediolateral laxity at 10°, 30°, 60°, and 90° flexion, whereas no correlation was observed at extension and 120° flexion. The correlations were stronger in gap measurement under 80 N than 60 N at all examined ranges. In patients with body mass indexes (BMIs) ≥ 30 kg/m², the correlation became non-significant.

CONCLUSION

Intraoperative joint gap laxity was associated with mediolateral laxity after TKA, especially at mid-flexion angles. The factors weakening the correlations were a lower applied distraction force for gap measurement and a larger BMI.

The medial gap is a reliable indicator for intraoperative soft tissue balancing in posterior-stabilized total knee arthroplasty

BACKGROUND

Appropriate soft tissue balance and accurate alignment are important for successful total knee arthroplasty (TKA). However, the optimal technique for establishing and measuring soft tissue balancing remains unclear. The aim of this study was to analyze the intraoperative medial and lateral gap pattern using digital knee balancer in posterior-stabilized (PS) TKA.

METHODS

This study involved 55 patients with medial osteoarthritis who underwent a primary TKA using an image-free navigation system. The extension gap and the flexion gap at 90° knee flexion were assessed using an offset seesaw-type digital balancer. Continuous joint distraction force from 10 lb to 60 lb was applied. Medial gap, lateral gap, and varus angle were measured.

RESULTS

The medial bone gap difference between extension and flexion was constant regardless of the distraction force from 20 lb to 60 lb. The lateral bone gap was significantly greater than the medial bone gap in extension and flexion from 30 lb to 60 lb (P < 0.05). The varus angle changed depending on the distraction force, especially in flexion. The varus angle in flexion was significantly greater than that in extension from 40 lb to 60 lb (P < 0.05).

CONCLUSIONS

The medial bone gap is a reliable indicator unaffected by the distraction force during surgery and is useful for adjusting the medial gap in extension and flexion appropriately to ensure medial stability in PS-TKA. The digital knee balancer and navigation system support both precise gap assessment and surgery.

Improving radiographic patello-femoral tracking in total knee arthroplasty with the use of a flexion spacer: a case-control study

PURPOSE

The purpose of this study was to compare the effectiveness of a flexion spacer in the clinical and radiological outcomes of patients who underwent total knee arthroplasty (TKA) and to compare these patients to a group of patients subjected to the same type of surgery but without the use of a flexion spacer. It was hypothesized that patients who underwent TKA using a flexion spacer would have better clinical and radiological outcomes than those without a flexion spacer in both short- and medium-term follow-ups.

METHODS

A consecutive series of patients undergoing TKA were included, yielding 20 patients in the study group. The control group was identified from the consultant database of the senior author, yielding 21 patients who underwent the same operation. All 41 patients received a Vanguard Knee System (Zimmer-Biomet, Warsaw, Indiana, USA). Cases were defined as those patients who had undergone TKA using a flexion spacer device for gap balancing; controls were defined as patients who had undergone TKA without the support of a flexion spacer device. Patients were clinically and radiographically evaluated at two consecutive follow-ups: T₁-13.1 ± 1.3 months and T₂-108 ± 6 months. Clinical evaluation was performed using the Knee Society Scoring System and the Western Ontario, McMaster Universities Osteoarthritis Index score. Radiographic evaluation included the femoral angle (α), the tibial angle (β), the sagittal femoral (γ) angle and the tibial slope (δ). Furthermore, the lateral patellofemoral angle (LPFA) and the Caton-Deschamps index were evaluated.

RESULTS

No statistically significant clinical differences were found between the two groups at T₁ and T₂; moreover, the clinical outcomes of the two groups were stable between the two follow-ups, with no significant improvement or worsening. Radiographic evaluation showed no difference in the two groups between T₁ and T₂; the only significant radiographic difference between the two groups concerned the LPFA (both at 30° and 60°) at each follow-up, which was significantly greater in cases than in controls (p = 0.001).

CONCLUSIONS

The current study demonstrates that the use of a flexion spacer significantly improves radiographic patello-femoral tracking, although no significant clinical differences were found between the two groups.

LEVEL OF EVIDENCE

Case-control study, level III.

Gap balancing versus measured resection for primary total knee arthroplasty: a meta-analysis study

INTRODUCTION

To achieve the most desirable post-operative results, operation techniques and procedures for total knee arthroplasty (TKA) are highly standardized. However, debates persist whether patients having undergone a gap balancing technique (GB) perform better than those having undergone measured resection (MR) technique. Therefore, a meta-analysis study was conducted to investigate advantages of GB compared to the MR. The focus of the present study was on clinical and functional scores, radiological measurements and further complications.

MATERIALS AND METHODS

The present meta-analysis was conducted according to the PRISMA checklist. In November 2019, literature search was performed. All clinical studies comparing measured resection technique versus gap balancing technique for primary total knee arthroplasty were considered for inclusion. Only articles reporting quantitative data under the outcomes of interest were eligible for inclusion. The methodological quality assessment and statistical analyses were performed through the Review Manager Software version 5.3 (The Cochrane Collaboration, Copenhagen).

RESULTS

Data from 25 clinical trials (2971 procedures) were collected. Patient baseline demonstrated a good comparability. No difference among the two cohorts was found in terms of SF-12 Mental and Physical, ROM, KSS, KSS Function, OKS, WOMAC. No difference was found in the alignment of mechanical axis and femoral rotation. During the knee motion, no difference was found between the medial and lateral gaps among the two techniques. The GB showed a significant elevated joint line (P < 0.0001), along with a longer duration of the operating time (P = 0.001). No differences were found in terms of revision surgery, aseptic loosening or prosthetic infections.

CONCLUSION

GB and MR achieve similar outcomes for TKA. In the GB group, a proximalisation of the joint line and extended operating time was detected. Regarding the additional outcomes of interest, the present analysis showed comparability between both groups, MR and GB.

Joint distraction force changes the three-dimensional articulation of the femur and tibia in total knee arthroplasty: a cadaveric study

PURPOSE

The purpose of this study was to test the hypotheses that the joint distraction force changes the three-dimensional articulation between the femur and the tibia and that the presence of posterior cruciate ligament (PCL) affects the three-dimensional articulation during joint gap evaluation in total knee arthroplasty (TKA).

METHODS

Cruciate-retaining TKA procedures were performed on 6 cadaveric knees using a navigation system. The joint center gap and varus ligament balance were measured using Offset Repo-Tensor^® with the knee at 90° of flexion before and after PCL resection for joint distraction forces of 89, 178, and 266 N. The three-dimensional location of the tibia relative to the femur and the axial rotational angle of the tibia were also assessed.

RESULTS

Regardless of PCL resection, the joint center gap became larger (p = 0.002, p = 0.020) and varus ligament balance became more varus (p = 0.002, p = 0.002) with increasing joint distraction force, whereas the tibia was more internally rotated (p = 0.015, p = 0.009) and more anteriorly located (p = 0.004, p = 0.009). The tibia was more internally rotated (p = 0.015) and more posteriorly located (p = 0.026) after PCL resection than before resection.

CONCLUSIONS

Joint distraction force changed three-dimensional articulation regardless of PCL preservation. PCL function was revealed as a factor restraining both tibial posterior translation and internal rotation. Surgeons should recognize that joint gap evaluation using a tensor device is subject to three-dimensional changes depending on the magnitude of the joint distraction force.

Influence of Narrow Femoral Implants on Intraoperative Soft Tissue Balance in Posterior-Stabilized Total Knee Arthroplasty

BACKGROUND

Narrow femoral implants were developed to improve fit and prevent overhang in primary total knee arthroplasty (TKA). We compared intraoperative soft tissue balance between standard and narrow implants in posterior-stabilized (PS) TKA.

METHODS

We enrolled 30 consecutive patients with varus osteoarthritis undergoing PS TKA using an image-free navigation system. Standard and narrow femoral trial implants were inserted, and their soft tissue balance was measured. Subgroup analysis, based on the actual implanted femoral implant, was performed to assess the influence of narrow implants on soft tissue balance.

RESULTS

Narrow trial group had significantly larger joint component gaps than standard trial group at all measured flexion angles, except at 60° (P < .05). For the standard implant cohort, narrow trial group had significantly larger joint component gaps than standard trial group at 30°, 120°, and 135° flexion (P < .05). For the narrow implant cohort, narrow trial group had significantly larger joint component gaps than standard trial group at all measured flexion angles, except at 0° and 60° (P < .05). Narrow trial group had significantly larger varus ligament balance than standard trial group at 45° and 60° flexion (P < .05). The varus angles for standard implants were comparable between groups; however, narrow trial group had significantly larger varus angles for narrow implants than standard trial group at 45°, 60°, and 120° flexion (P < .05).

CONCLUSION

The medial-lateral dimension and volume of the femoral component may influence intraoperative soft tissue balance in PS TKA. The effects may be greater when narrow implants are selected to avoid component overhang.

Medial knee stability at flexion increases tibial internal rotation and knee flexion angle after posterior-stabilized total knee arthroplasty

BACKGROUND

Soft-tissue balance is an important element for the success of total knee arthroplasty; however, the influence of intraoperative soft-tissue balance on knee kinematics in posterior-stabilized-total knee arthroplasty remains unknown. We investigated whether intraoperative soft-tissue balance could influence knee kinematics and flexion angle after posterior-stabilized-total knee arthroplasty.

METHODS

This study included 30 patients with knee osteoarthritis and varus alignment who underwent posterior-stabilized total knee arthroplasty; intraoperative soft-tissue balance parameters, such as varus ligament balance and joint component gap, were assessed by an offset-type tensor at knee flexion angles of 0°, 10°, 30°, 60°, 90°, 120°, and 135°. Medial and lateral compartment gaps were calculated. The amount of tibial internal rotation was determined between 60° and 135° flexion by the navigation system. Simple linear regression analysis was used to analyze the effects of intraoperative soft-tissue balance on tibial internal rotation. Linear regression analysis was used to assess correlation between tibial internal rotation and postoperative knee flexion angle.

FINDINGS

Medial compartment gaps at 60° (r = -0.57, P < 0.05) and 90° (r = -0.60, P < 0.05) of flexion were significantly negatively correlated with tibial internal rotation. Moreover, tibial internal rotation showed a significant correlation with the 2-year postoperative knee flexion angle (r = 0.50, P < 0.05) and improvement in knee flexion angle (r = 0.61, P < 0.05).

INTERPRETATION

Thus, smaller medial compartment gaps at 60° and 90° of flexion play an important role in achieving medial pivot motion with tibial internal rotation; moreover, tibial internal rotation provides a better flexion angle after posterior-stabilized total knee arthroplasty.