The medial constrained insert restores native knee rotational kinematics after bicruciate-retaining total knee arthroplasty

Achieving Specified Laxity in a Noncruciate Total Knee: A Laboratory Design Study

BACKGROUND

Noncruciate total knee arthroplasty designs, including ultracongruent, medially congruent, and medial pivot, are gaining increasing attention in total knee arthroplasty surgery. However, there is no consensus for the bearing surface design, whether there should be different medial, lateral, anterior, and posterior laxities, or whether the medial side should be a medial pivot. This study proposes the criterion of reproducing the laxity of the anatomic knee, defined as the displacements and rotations of the femur on the tibia in the loaded knee when shear and torque are applied. The purpose of this study was to determine the ideal tibial radii to achieve that goal.

METHODS

The femoral component was based on the average knee from 100 mild arthritic knee scans. There were 8 tibial components that were designed with different sagittal radii: antero-medial, antero-lateral, postero-medial, and postero-lateral. Radii were defined as the percent height reduction from full conformity with the femoral profile. Components were 3-dimensional-printed. A test rig was constructed where the tibial component was fixed and shear and torque were applied to the femoral component. Displacements and rotations of the femoral component were measured at 0 and 45° of flexion, the latter representing any flexion angle due to the constant femoral sagittal radius.

RESULTS

Displacements ranged from 0 to 11 mm, and rotations ranged from 1 to 11°. Anterior femoral displacements were higher than posterior due to the shallow distal-anterior femoral profile. The final femoral and tibial components with the most closely matched anatomic laxity values were designed and tested.

CONCLUSIONS

A steeper distal-anterior femoral radius was an advantage. High medial-anterior tibial conformity was important. However, on the lateral side, the posterior sagittal tibial radius had to be shallower than ideal to allow femoral rollback in high flexion. This meant that the posterior laxity displacements on the lateral side were higher than anatomic, and there was no guidance for lateral femoral rollback.

Intraoperative Kinematics in Posterior Cruciate Ligament Retaining Total Knee Arthroplasty Using Different Inserts

We analyzed the intraoperative kinematics of total knee arthroplasty (TKA) using a navigation system to investigate the influence of different inserts on kinematics. This was a retrospective observational study. The Vanguard individualized design (33 patients, 33 knees) XP and anterior-stabilized (AS) inserts were used in TKA for osteoarthritis. Kinematic data were intraoperatively recorded. The range of motion, tibiofemoral rotational angle, anteroposterior translation of the femur, and varus-valgus laxity were compared between the two inserts (XP vs. AS). There was no significant difference in the range of motion (extension: XP, 3.7° ± 3.3° vs. AS, 3.8° ± 3.3°, p = 0.84; flexion: XP, 138.1° ± 10.2° vs. AS, 139.0° ± 13.3°, p = 0.73). With the AS insert, the tibia was gradually internally rotated as the knee was flexed. At maximum extension, the internal rotation was smallest with AS (XP 6.5° ± 4.0° vs. AS 5.1° ± 3.4°, p = 0.022), which was also associated with smaller anterior femoral translation (maximum extension: XP, 14.1 ± 4.8 mm vs. AS, 11.3 ± 4.7 mm, p = 0.00036; 30°: XP, 23.7 ± 5.6 mm vs. AS, 20.7 ± 5.1 mm, p = 0.000033; 45°: XP, 24.4 ± 4.9 mm vs. AS, 23.2 ± 4.5 mm, p = 0.0038). The AS was associated with a lower varus-valgus laxity (30° XP 4.1° ± 3.4 vs. AS 3.3° ± 2.7°, p = 0.036; 60°: XP, 3.2° ± 3.0° vs. AS, 2.4° ± 3.3°, p = 0.0089). The AS insert facilitated sequential tibiofemoral rotation with varus-valgus stability in mid-flexion without restricting the range of motion.

Bi-cruciate retaining total knee arthroplasty is here to stay: A consecutive series transitioning from manual instrumentation to enabling technologies

BACKGROUND

Bicruciate-retaining (BCR) total knee arthroplasty (TKA) has seen renewed interest due to the potential for more natural knee kinematics with anterior cruciate ligament (ACL) retention.

OBJECTIVE

The present study attempts to determine differences in the 2-year survivorship and patient-reported outcomes between two surgical strategies (traditional instrumentation versus robotics) applied to the extensive use of a modern, 2nd generation BCR TKA design.

METHODS

We performed a retrospective study with prospectively collected data of 113 patients who underwent primary TKA between 2018 and 2020 using a 2nd generation BCR TKA implant. Patient demographics, PROMS, and intra/post-operative complications were collected. Patients were also evaluated according to the use or not of robotics. A Kaplan-Meier analysis was used to evaluate revision-free survival at follow up.

RESULTS

102 patients were enrolled: 90 received traditional surgery and 12 robotic-assisted surgery. The mean age was 68 years (SD 7.76) with an average BMI of 29.6 kg/m2 (SD 3.56). The mean follow up (FU) was 32.4 ± 6.2 months (range 24-45 months). Survivorship at 2 years was 98% (95% CI: 92.4-99.5). Revisions/reoperations were performed for anterior cruciate ligament (ACL) tear (1/4), pain (1/4), arthrofibrosis (1/4) and acute periprosthetic joint infection (PJI) (1/4). At final FU, 92 patients (90.2%) considered themselves satisfied, showing a mean OKS of 40.6 (SD 5.1) and a mean FKS of 76.7 (SD 11.8). No differences in the outcome were found between traditional and robotic-assisted procedures.

CONCLUSION

The modern BCR design evaluated in this study achieved excellent results in terms of implant survivorship, low rate of reoperation and clinical results, independently from the use of enabling technologies.

Age and sex differences in coronal lower extremity alignment in a healthy Asian population

BACKGROUND

The purpose of this study was to analyze the coronal alignment of lower extremities according to age and sex in a healthy population and demonstrate the differences.

METHODS

Standing full-lower limb anteroposterior (AP) radiographs of healthy volunteers (670 males and 782 females) aged 18-69 years were retrospectively analyzed. The hip-knee-ankle angle (HKA), lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), joint line convergence angle and femoral bowing angle (FBA) were measured. The radiographic parameters were compared according to groups of age and sex. The proportion of volunteers with varus or valgus alignment more than 3° were also analyzed.

RESULTS

With increasing age, HKA and LDFA varus increased. With increasing age, femoral medial bowing decreased. In addition, the HKA showed more varus alignment in males than in females (178.01° vs. 178.82°, P < 0.001). The MPTA was about 1° smaller in males than in females (P < 0.001). The proportion of patients with varus alignment of more than 3° increased with increasing age, with 16.9% in the 10-19 years old and 38.0% in the 60-69 years old groups.

CONCLUSION

This study demonstrated that males showed more varus tibial alignments than females. Varus limb alignment, LDFA, and FBA also increases with age. In contrast, tibial alignment was constant across all age groups. Therefore, differences in lower extremity alignment according to age and sex should be considered in estimating individual prearthritic alignments.

Does contemporary bicruciate retaining total knee arthroplasty restore the native knee kinematics? A descriptive literature review

BACKGROUND

There has been no consensus on the benefit of retaining the anterior cruciate ligament (ACL) in TKAs. This study aims to review recent evidences around the kinematics of bicruciate retaining (BCR) total knee arthroplasty (TKA).

MATERIALS AND METHODS

A search of the literature was conducted on PubMed and Web of Science. Reports that assessed the BCR TKA kinematics, including both in vitro cadaveric studies and in vivo clinical studies, were reviewed.

RESULTS

A total number of 169 entries were obtained. By exclusion criteria, five in vitro studies using cadaveric knee specimens and six in vivo studies using patient cohorts were retained. In vitro studies showed a low internal rotation (< 10°) throughout the flexion path in all BCR TKAs. Compared to native knees, the difference in the internal rotation was maximal during early and late flexion; the femur in the BCR TKA was significantly more anteriorly positioned (1.7-3.6 mm from 0° to 110°) and more externally rotated (3.6°-4.2° at 110° and 120°). In vivo studies revealed that the native knee kinematics, in general, were not fully restored after BCR TKA during various knee activates (squatting, level-walking, and downhill-walking). There are asymmetric kinematics during the stance phase of gait cycle and a smaller range of axial rotation (23% patients exhibiting external tibial rotation) throughout the gait cycle in BCR TKAs.

CONCLUSIONS

Critical insights in the complex BCR TKA biomechanics have been reported from recent laboratory kinematics studies. However, whether contemporary BCR TKAs can fully restore native knee kinematics remains debatable, warranting further investigations.

Influence of Bone Morphology on In Vivo Tibio-Femoral Kinematics in Healthy Knees during Gait Activities

An improved understanding of the relationships between bone morphology and in vivo tibio-femoral kinematics potentially enhances functional outcomes in patients with knee disorders. The aim of this study was to quantify the influence of femoral and tibial bony morphology on tibio-femoral kinematics throughout complete gait cycles in healthy subjects. Twenty-six volunteers underwent clinical examination, radiographic assessment, and dynamic video-fluoroscopy during level walking, downhill walking, and stair descent. Femoral computer-tomography (CT) measurements included medial condylar (MC) and lateral condylar (LC) width, MC and LC flexion circle, and lateral femoral condyle index (LFCI). Tibial CT measurements included both medial (MTP) and lateral tibial plateau (LTP) slopes, depths, lengths, and widths. The influence of bony morphology on tibial internal/external rotation and anteroposterior (AP)-translation of the lateral and medial compartments were analyzed in a multiple regression model. An increase in tibial internal/external rotation could be demonstrated with decreasing MC width β: −0.30 (95% CI: −0.58 to −0.03) (p = 0.03) during the loaded stance phase of level walking. An increased lateral AP-translation occurred with both a smaller LC flexion circle β: −0.16 (95% CI: −0.28 to −0.05) (p = 0.007) and a deeper MTP β: 0.90 (95% CI: 0.23 to 1.56) (p = 0.01) during the loaded stance phase of level walking. The identified relationship between in vivo tibio-femoral kinematics and bone morphology supports a customized approach and individual assessment of these factors in patients with knee disorders and potentially enhances functional outcomes in anterior cruciate ligament injuries and total knee arthroplasty.

Obtaining anatomic motion and laxity characteristics in a total knee design

BACKGROUND

Since the introduction of the first total knee designs, a frequent design goal has been to reproduce normal knee motion. However, studies of many currently used total knee designs, have shown that this goal has not been achieved. We proposed that Guided Motion total knee designs, could achieve more anatomic motion than present standard designs.

METHODS

Several Guided Motion knees for application without cruciate ligaments were designed using a computer method where the bearing surfaces were generated by the motion required. A knee testing machine was constructed where physiological forces including compressive, shear and torque were applied during knee flexion. The neutral path of motion and the laxity about the neutral path were measured. This evaluation method was a modification of the ASTM standard Constraint Test.

RESULTS

The motions of the Guided Motion knees and a standard PS knee were compared with the anatomic motion of knee specimens determined in an earlier study The Guided Motion knees showed motion patterns which were closer to anatomic than the PS knee.

CONCLUSIONS

The results provided justification for carrying out further evaluations of functional conditions, using either knee simulators or computer modelling. If anatomic motions could be reproduced in vivo, it is possible that clinical outcomes could be improved.

Bicruciate-retaining total knee arthroplasty: What’s new?

Primary total knee arthroplasty (TKA) is a widespread procedure to address end stage osteoarthritis with good results, clinical outcomes, and long-term survivorship. Although it is frequently performed in elderly, an increased demand in young and active people is expected in the next years. However, a considerable dissatisfaction rate has been reported by highly demanding patients due to the intrinsic limitations provided by the TKA. Bicruciate-retaining (BCR) TKA was developed to mimic knee biomechanics, through anterior cruciate ligament preservation. First-generation BCR TKA has not gained popularity due to its being a challenging technique and having poor survival outcomes. Thanks to implant design improvement and surgeon-friendly instrumentation, second-generation BCR TKA has seen renewed interest. This review will focus on surgical indications, kinematical basis, clinical results and latest developments of second-generation BCR TKA.

Knee joint laxity is restored in a bi-cruciate retaining TKA-design

PURPOSE

The goal is to evaluate the passive stability of a bicruciate retaining, cruciate retaining and bicruciate substituting TKA design in relation to the native knee stability in terms of the laxity envelope. A bicruciate retaining knee prosthesis was hypothesized to offer a closer to normal knee stability in vitro.

METHODS

Fourteen cadaveric knee specimens have been tested under passive conditions with and without external loads, involving a varus/valgus and an external/internal rotational torque, distraction/compression force and an anteroposterior shear force. Subsequently, the native knee, bicruciate retaining, cruciate retaining and finally a bicruciate substituting total knee arthroplasty were tested.

RESULTS

Through the range of motion, the width of the varus/valgus and internal/external laxity envelope for the native knee and the bicruciate retaining knee were almost equivalent, whereas the cruciate retaining and the bicruciate substituting knee displayed less laxity and more joint distraction. In all prosthetic knees, an equal anteroposterior laxity was seen for the lateral and medial side whereas in the native knee, a difference in laxity was seen between the stable medial side and the more mobile lateral side.

CONCLUSION

Bicruciate retaining knee prostheses can restore normal laxity and thus have the potential to offer more normal knee function. Restoration of natural peri-articular soft-tissue tension is clinically important because of its obvious effects on joint stability and range of motion. Furthermore, the results of this study could help to establish the ideal ligament tension and laxity in more conventional implants by approaching the normal values for passive knee evaluation as presented here.

Intraoperative analysis of the kinematics of the native knee including two-dimensional translation of the femur using a navigation system : a cadaveric study

The aim of this cadaveric study was to evaluate the intraoperative kinematics of the native knee including two-dimensional translation of the femur using a navigation system. Eight native knees of 4 fresh-frozen whole-body cadavers were used for the study. The kinematics of each knee were analyzed intraoperatively using the navigation system. Although anterior-posterior translation could not be assessed directly, it could be calculated using a formula derived from the parameters in the navigation system. The native knee showed external rotation of the femur in early knee flexion, transient internal rotation in mid flexion, and gradual external rotation in late flexion. There was no marked change in the coronal rotation angle of the mechanical axis during knee flexion. The femoral center moved anteriorly in early knee flexion and posteriorly in late flexion. The distance moved in the medial-lateral direction was relatively smaller than that in the anterior-posterior direction. Two-dimensional translation of the surgical epicondylar axis showed a medial pivot-like motion. In this cadaveric study, the kinematics of the native knee, including two-dimensional translation of the femur, could be satisfactorily assessed intraoperatively using a navigation system. The intraoperative kinematics of the knee can be analyzed in more detail using this methodology. J. Med. Invest. 66 : 367-371, August, 2019.