A new label-free amperometric immunosenor for rubella vaccine

Carbon nanotube enhanced label-free immunosensor for amperometric determination of oocyte maturation-inducing hormone in fish

Maintaining high-quality fish eggs stably and efficiently is important for aquaculture. We developed a label-free immunosensor system for measuring 17,20β-dihydroxy-4-pregnen-3-one (DHP). DHP is suddenly secreted before ovulation as a maturation-inducing hormone in fish, and therefore, DHP levels are an indicator for predicting ovulation. The method is based on immunologic reactions and amperometric measurement using cyclic voltammetry (CV). For biomolecular immobilization on the surface of sensing electrode, Au electrode, we used self-assembled monolayers of thiol-containing compounds to fix anti-DHP immunoglobulin. In addition, we used a single-walled carbon nanotube to improve sensitivity. Using this electrode, we were able to determine the CV signal change caused by the antigen-antibody complex. The proposed immunosensor system showed a linear correlation (correlation coefficient: 0.9827) between the anodic peak current of the CV and the DHP level in range from 15.6 to 50,000 pg ml(-1). The sensor system was then applied to monitor DHP of goldfish (Carassius auratus). Blood plasma of fish was collected every 3 h after administering a DHP inducer. In the measurement, the anodic peak current of the CV showed distinct changes depending on DHP levels in the blood plasma. A good relationship was observed between DHP levels determined by our proposed system and the conventional method (correlation coefficient: 0.9351).

Strategies for electrochemical detection in immunochemistry

In this review, the current status of research in electrochemical immunosensors is considered. We primarily focus on label-free and enzyme-labeled immunosensors, and the analytical capabilities of these devices are discussed. Moreover, the use of magnetic beads as new materials for immunosensors coupled with electrochemical sensing is also described, together with the application of new molecules such as aptamers as specific biorecognition elements. Examples of the applicability of these devices in solving various analytical problems in clinical, environmental and food fields are reported. Finally, the prospects for the further development of immunosensor technologies are shown.

A mediatorless and label-free amperometric immunosensor for detection of h-IgG

A novel experimental methodology for studying a mediatorless and label-free immunosensor is proposed by immobilizing antibody on gold nanoparticle/L-cysteine coated electrode (nano-Au/L-cysteine electrode). Differential pulse voltammograms (DPV) resulting from the assembled immunosensor indicate that the immunosensor shows excellent electrochemical response to dopamine so that the electrochemical response is utilized for the signal generation step of the immunosensor. Therefore, by means of unenzymatic-labeling procedure combined with the amperometric detection using dopamine as substrate, the immunological reaction can be detected. After the immunosensor is incubated with h-IgG solution, the access of electrocatalytic behavior center of the immunosensor to dopamine is partly inhibited, which leads to a linear decrease in amperometric response of the immunosensor with h-IgG concentration over a range 0.82-90 ng mL(-1) by DPV.

Electrochemical Sensors Based on Organic Conjugated Polymers

Organic conjugated polymers (conducting polymers) have emerged as potentialcandidates for electrochemical sensors. Due to their straightforward preparation methods,unique properties, and stability in air, conducting polymers have been applied to energystorage, electrochemical devices, memory devices, chemical sensors, and electrocatalysts.Conducting polymers are also known to be compatible with biological molecules in aneutral aqueous solution. Thus, these are extensively used in the fabrication of accurate,fast, and inexpensive devices, such as biosensors and chemical sensors in the medicaldiagnostic laboratories. Conducting polymer-based electrochemical sensors and biosensorsplay an important role in the improvement of public health and environment because rapiddetection, high sensitivity, small size, and specificity are achievable for environmentalmonitoring and clinical diagnostics. In this review, we summarized the recent advances inconducting polymer-based electrochemical sensors, which covers chemical sensors(potentiometric, voltammetric, amperometric) and biosensors (enzyme based biosensors,immunosensors, DNA sensors).

Development of immunosensors using carbon nanotubes

With increasing reports on bioterrorism, avian flu, and other bio-threats, rapid and real time detection methods are highly warranted. Studies on developing highly sensitive immunosensors aiming at the early detection and clinical diagnoses of various diseases including cancer are undertaken all over the globe. Carbon nanotubes (CNTs) have been widely discussed as materials with enormous potential for a wide range of in vivo and in vitro bioapplications, ranging from drug delivery to highly sensitive biosensors, owing to their superior electronic and mechanical properties along with nanoscale dimensions. Though a lot of attention has been drawn toward carbon nanotubes for the past 15 years in academia and to a certain extent in industry, CNT-based immunosensors and other applications are still in the nascent stage, and there are many challenges to be overcome for the successful commercialization of the concepts. This article highlights on the recent developments and the possible impacts of carbon nanotube based immunosensors.

An impedimetric immunosensor for the detection of autoantibodies directed against gliadins

An immunosensor has been developed for the detection of autoantibodies directed against wheat gliadin, a protein fraction of cereal gluten which is involved in celiac disease. The immunosensor is based on the immobilization of gliadins onto gold electrodes covered with a polyelectrolyte layer of poly(4-styrenesulfonic acid sodium salt). The immobilization was monitored by quartz crystal microbalance (QCM) analysis. The antigen-antibody interaction signal was amplified by an incubation step with peroxidase-labeled immunoglobulins and subsequent peroxidase-catalyzed oxidation of 3-amino-9-ethylcarbazole (AEC). Changes in the insulating properties of the electrode layer were measured by electrochemical impedance spectroscopy (EIS) in the presence of ferri/ferro-cyanide. Impedance spectra could be fitted to a Randles equivalent circuit with high accuracy. Exposing the sensor electrodes to various antigliadin antibody concentrations resulted in proportional changes in the charge transfer resistance. A calibration graph for the detection of antigliadin antibodies was established for antibody concentrations between 10(-8) and 10(-6) M. Finally, the sensor was used for the determination of antigliadin autoantibodies of the IgG and IgA type in several human sera.

Prospects of conducting polymers in biosensors

Applications of conducting polymers to biosensors have recently aroused much interest. This is because these molecular electronic materials offer control of different parameters such as polymer layer thickness, electrical properties and bio-reagent loading, etc. Moreover, conducting polymer based biosensors are likely to cater to the pressing requirements such as biocompatibility, possibility of in vivo sensing, continuous monitoring of drugs or metabolites, multi-parametric assays, miniaturization and high information density. This paper deals with the emerging trends in conducting polymer based biosensors during the last about 5 years.

Mechanism for interplay between electron and ionic fluxes in KhFek[Fe(CN)6]l.mH2O compounds

This paper develops a framework for the interpretation of ionic insertion/deinsertion reactions in an aqueous environment taking place in transition-metal hexacyanoferrates of the general formula K(h)[Fe(2+) (CN)(6)](l).mH(2)O, also called Prussian Blue. Three different processes were fully separated in the electrochemistry of these films. It was clearly identified that one of these electrochemical processes involves the insertion/deinsertion of H(3)O(+) (hydrated protons) through the channels of the K(h)[Fe(2+) (CN)(6)](l).mH(2)O structure to reach the film electroneutrality during the electron transfer between Everitt's Salt and Prussian Blue. The other electrochemical processes involve K(+) or H(+) (proton) exchange through the water crystalline structure existing in the channels of the K(h)[Fe(2+)(CN)(6)](l).mH(2)O structure.