Quantitative determination of organochlorine pesticides in sewage sludges using soxtec, soxhlet and pressurized liquid extractions and ion trap mass–mass spectrometric detection

Targeted Multiresidue Method for the Analysis of Different Classes of Pesticides in Agro-Food Industrial Sludge by Liquid Chromatography Tandem Mass Spectrometry

Sludge generated after washing of fruits and vegetables during agro-food processes is a complex matrix and selective methods for the identification and quantification of pesticides’ residues are necessary in order to achieve a sustainable and effective management of the total sewage. The present work describes the development and validation of a reliable, simple and fast analytical method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the determination of 47 pesticides of different chemical classes, including organosphosphates, pyrethroids, neonicotinoids, triazoles and others, in sludge samples after QuEChERS sample preparation. The necessity of the individual steps of QuEChERS was investigated and the LC-ESI-MS/MS conditions were optimized to achieve maximum sensitivity of the target analytes. The method limits of detection (LODs) ranged between 0.0005 mg/kg (imidacloprid) and 0.05 mg/kg (beta cyfluthrin). The recoveries ranged between 71–120% and the repeatability of the method was ≤25% expressed as relative standard deviation. The method was applied to sludge samples generated after washing of fruits in an agro-fruit-packaging unit in Greece. The results showed the presence of 37 pesticides’ active substances with concentrations ranging from low ppbs, such as fludioxinil (5 μg/kg) up to low ppms such as beta cyfluthrin (3.5 mg/kg) and with their sum concentration reaching up to 19 mg/kg.

Doping detection in animals: A review of analytical methodologies published from 1990 to 2019

Despite the impressive innate physical abilities of horses, camels, greyhounds, or pigeons, doping agents might be administered to these animals to improve their performance. To control these illegal practices, anti-doping analytical methodologies have been developed. This review compiles the analytical methods that have been published for the detection of prohibited substances administered to animals involved in sports over 30 years. Relevant papers meeting the search criteria that discussed analytical methods aiming to detect and/or quantify doping substances in animal biological matrices published from 1990 to 2019 were considered. A total of 317 studies were included, of which 298 were related to horses, demonstrating significant advances toward the development of doping detection methods for equine sports. However, analytical methods for the detection of doping agents in sports involving other species are lacking. Due to enhanced accuracy and specificity, chromatographic analysis coupled to mass spectrometry detection is preferred over immunoassays. Regarding biological matrices, blood and urine remain the first choice, although alternative biological matrices, such as hair and feces, have been considered. With the increasing number and type of drugs used as doping agents, the analytes addressed in the published papers are diverse. It is very important to continue to detect and quantify these drugs, recognizing those that are most frequently used, in order to punish the abusers, protect animals' health, and ensure a healthier and genuine competition.

Easy and fast extraction methods to determine organochlorine pesticides in sewage sludge, soil, and water samples based at low temperature

Organochlorine pesticides present in sewage sludge can contaminate soil and water when they are used as either fertilizer or agricultural soil conditioner. In this study, the technique solid-liquid extraction with low temperature purification was optimized and validated for determination of ten organochlorine pesticides in sewage sludge and soil samples. Liquid-liquid extraction with low temperature purification was also validated for the same compounds in water. Analyses were performed by gas chromatography-mass spectrometry operating in the selective ion monitoring mode. After optimization, the methods showed recoveries between 70% and 115% with relative standard deviation lower than 13% for all target analytes in the three matrices. The linearity was demonstrated in the range of 20 to 70 µg L^-1, 0.5 to 60 µg L^-1, and 3 to 13 µg L^-1, for sludge, soil, and acetonitrile, respectively. The limit of quantification ranged between 2 and 40 µg kg^-1, 1 and 6 µg kg^-1, and 0.5 µg L^-1 for sludge, soil, and water, respectively. The methods were used in the study of pesticide lixiviation carried out in a poly vinyl chlorine column filled with soil, which had its surface layer mixed with sludge. The results showed that pesticides are not leached into soil, part of them is adsorbed by the sewage sludge (4-40%), and most pesticides are lost by volatilization.

Procedures of determining organic trace compounds in municipal sewage sludge-a review

Sewage sludge is the largest by-product generated during the wastewater treatment process. Since large amounts of sludge are being produced, different ways of disposal have been introduced. One tempting option is to use it as fertilizer in agricultural fields due to its high contents of inorganic nutrients. This, however, can be limited by the amount of trace contaminants in the sewage sludge, containing a variety of microbiological pollutants and pathogens but also inorganic and organic contaminants. The bioavailability and the effects of trace contaminants on the microorganisms of soil are still largely unknown as well as their mixture effects. Therefore, there is a need to analyze the sludge to test its suitability before further use. In this article, a variety of sampling, pretreatment, extraction, and analysis methods have been reviewed. Additionally, different organic trace compounds often found in the sewage sludge and their methods of analysis have been compiled. In addition to traditional Soxhlet extraction, the most common extraction methods of organic contaminants in sludge include ultrasonic extraction (USE), supercritical fluid extraction (SFE), microwave-assisted extraction (MAE), and pressurized liquid extraction (PLE) followed by instrumental analysis based on gas or liquid chromatography and mass spectrometry.

The residues, distribution, and partition of organochlorine pesticides in the water, suspended solids, and sediments from a large Chinese lake (Lake Chaohu) during the high water level period

The levels of organochlorine pesticides (OCPs) in the water, suspended solids, and sediments from Lake Chaohu during the high water level period were measured by a solid-phase extraction gas chromatograph-electron capture detector. The spatial distributions of the three phases and the water/suspended solids and sediment/water partition coefficients were analyzed. The results showed the following: (1) The mean contents of OCPs in the water, suspended solids, and sediments were 132.4 ± 432.1 ng/L, 188.1 ± 286.7 ng/g dry weight (dw), and 13.7 ± 9.8 ng/g dw, respectively. The dominant OCP components were isodrin (85.1%) for the water, DDTs (64.4%) for the suspended solids, and both isodrin (48.5%) and DDTs (31.8%) for the sediments. (2) β-HCH was the primary isomer of HCHs in the water and sediments, and the proportions were 61.7 and 41.3%; γ-HCH was the primary isomer in the suspended solids, accounting for 49.3%; p,p'-DDT was the dominant content of DDTs in the water and suspended solids, whereas p,p'-DDD was the main metabolite of DDTs in the sediments. (3) The concentrations of contaminants in the water from the western lake were greater than those from the eastern lake, but the concentrations in the suspended solids from the western lake were less than those from the eastern lake. (4) There was no significant correlation between the water-suspended solids partition coefficient Kd and the n-octanol-water partition coefficient Kow, and between the sediment-water organic-C weighted sorption coefficients Koc and Kow.

Determination of lindane leachability in soil-biosolid systems and its bioavailability in wheat plants

The leachability of lindane from different biosolid amended soils was determined and compared to its bioavailability. Sand, soil, and a mixture of soil-sand (1:1 w/w) were spiked with lindane, blended with different amounts of biosolids, and subjected to a leaching process with water that lasted for 1-28 d. This procedure is in accordance with ISO/TS 21268-1: 2007. After these batch tests, lindane was extracted from the leachates using three different solvent-free microextraction techniques, including solid phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and silicone rod extraction (SRE). The amount of lindane was determined with thermal desorption and gas chromatography coupled to mass spectrometry (GC-MS). The efficiencies of the three microextraction techniques were statistically different, and the efficiency could be related to the amount of polydimethylsiloxane (PDMS) in each extraction device. However, all of the techniques provide data that shows that the leachability of lindane is dependent on the amount of organic matter contained in the matrix. The results of the lindane leachability assay were compared to the bioavailability of lindane, which was determined by measuring the amount of lindane that accumulated in the roots of wheat plants grown in similar soil-biosolid systems. It was confirmed that the amount of organic matter in the matrix is a determining factor for lindane immobilization. The presence of biosolids decreases the mobility of lindane in all of the systems under study. Similarly, increasing biosolid concentrations in the soil significantly decreased the bioavailability of lindane and, consequently, plant absorption. The good correlation (R(2)=0.997) between the leachability of lindane from the matrix and plant absorption of lindane indicates that the proposed biomimetic methodology can predict the bioavailability of lindane in a time period as short as 7d. The results of this work confirm that amending contaminated soils with biosolids is beneficial for immobilizing lindane and helps prevent the percolation of lindane through the soil profile and into groundwater.

Procedures for analysis of atrazine and simazine in environmental matrices

There is an ongoing need to monitor soil and trophic chain samples for residues of triazine herbicides, particularly atrazine and simazine, because these herbicides are among the most used members of their class, are toxic, can be persistent, and are widely distributed in the environment. The main purpose of this review is to provide an overview of principle techniques and approaches used in analyzing atrazine, simazine, and other triazine herbicide residues in environmental matrices. The methods covered generally provide low detection limits, acceptable levels of matrix interferences, and are relatively fast and inexpensive. Atrazine and simazine are popular herbicides used to control a variety of broad leaf and grassy weeds in agriculture and on industrial sites. Because they are widely and frequently used, the environmental contamination of these compounds is considerable. Atrazine, simazine, and other triazines have the ability to translocate in ecosystems. When this occurs, it is often necessary to monitor their residue content in soils, vegetation, biota, and water. There is a vast literature available that addresses the extraction and clean-up of soil, vegetation, animal tissue, and animal fluid samples; unfortunately, few of these publications compare the effectiveness of results obtained on similar matrices. In this review we endeavor to review and provide comparative information on methods dedicated to determining residues of atrazine, simazine, and other triazines in several environment matrices: soil, plants, animal tissues, and water.

Determination of organochlorine pesticides in sewage sludge by matrix solid-phase dispersion and gas chromatography-mass spectrometry

A method based on matrix solid-phase dispersion (MSPD) has been developed for the determination of 16 organochlorine pesticides (OCs) in sludge from municipal sewage plants. Samples of lyophilized sludge were blended with alumina, placed in small columns and OCs extracted with dichloromethane assisted by sonication. Purification of the extracts was accomplished by solid-phase extraction on C(18) columns and OCs were eluted with acetonitrile. Analyses were performed by gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode (GC-MS-SIM) using deuterated OCs as internal standards. The limits of detection were between 0.03 ng/g for 4,4'-DDE and 0.7 ng/g for endrin aldehyde. Levels of OCs were determined in sewage sludge collected from 19 water treatment plants located in the province of Madrid (Spain). In all of the analyzed samples, aldrin was the compound most often found with a mean concentration of 76 ng/g. Endosulfan-I, alpha-BHC, 4,4'-DDE and 4,4'-DDT were also present at high concentrations, with average values ranging from 32.3 to 74.3 ng/g. OCs were detected in all of the samples, with a total concentration ranging from 52 to 528 ng/g dry weight.

Application of a novel cold activated carbon fiber-solid phase microextraction for analysis of organochlorine pesticides in soil

A novel and simple analytical procedure using cold activated carbon fiber-solid phase microextraction (CACF-SPME) was applied to determine organochlorine pesticides (OCs) in soil samples. The pesticides in this study consist of alpha -, beta -, gamma -, and delta -hexachlorocyclohexane (HCH). By heating the sample while cooling the fiber, the developed method not only provides better performance in terms of sensitivity, linearity and recovery but also offers shorter adsorption procedure than that of traditional headspace-solid phase microextraction (HS-SPME). The experimental conditions such as the amount of water, adsorption time and adsorption temperature were optimized. Matrix effects were investigated with different types of soils. We concluded that using the standard addition method was required for quantification purposes. The limits of detection obtained using the proposed method range from 0.01 to 0.05 ng/g, and the recoveries for CACF-SPME are in the range of 80.01% to 89.68% with relative standard deviation (RSDs) better than 8.60%. The proposed method was further applied to determine OCs in real agricultural soil. The results are in good agreement with those obtained using traditional ultrasonic extraction. The research demonstrates the suitability of the CACF-SPME for the analysis of OCs in soil.

Procedures of trophic chain samples preparation for determination of triazines by HPLC and metals by ICP-AES methods

The aim of this research was monitoring the distribution of atrazine and simazine as well as metals Pb, Cd, Zn, Al, Co, Ni, and V along with trophic chains: soil-vegetables and soil, carrot or grass and meat. Different techniques of herbicides extraction by means of many solvents were examined. Triazines were analysed by means of HPLC, metals by means of ICP-AES. Detection limits: LOD=0.2 microg ml(-1), determination limits: LOQ=0.73 microg ml(-1) for atrazine and LOD=0.3 microg ml(-1), LOQ=1.12 microg ml(-1) for simazine were obtained. The content (microg g(-1)) of simazine in soil was in range: 3.45-8.60, in vegetable roots: 6.62-38.15, in vegetable leaves: 2.45-31.71, in rabbit fat: 0.13-49.90. The content (microg g(-1)) of atrazine in soils was in range: 11.9-13.03, in vegetable roots: 13.61-92.90. In analysed material the particular metals after microwave or dry digestion were determined in range (microg g(-1)): Pb: 6.48-43.18; Cd: 0.11-0.57; Zn: 8.79-51.90; Al: 10.22-24.48; Co: 0.18-3.89; Ni: 0.37-6.36; V: 0.29-1.48.

Pressurized liquid extraction in environmental analysis

A critical evaluation of recent literature utilizing pressurized liquid extraction (PLE) for environmental analysis is presented by compound class. Overall, the extraction efficiency of PLE, using the appropriate solvent, temperature and pressure for extraction, is similar to that of Soxhlet extraction. PLE has been used for some classes of compounds that are thermally labile (e.g., explosives) and may require acidic conditions for extraction (e.g., organometallic compounds). References to recent applications are presented emphasizing studies which utilize unspiked, natural matrices and studies that compare PLE to alternate extraction techniques.