HILIC mode separation of polar compounds by monolithic silica capillary columns coated with polyacrylamide

Preparation of high-efficiency HILIC capillary columns utilizing slurry packing at 2100 bar

Complex mixture analysis requires high-efficiency chromatography columns. Although reversed phase liquid chromatography (RPLC) is the dominant approach for such mixtures, hydrophilic interaction liquid chromatography (HILIC) is an important complement to RPLC by enabling the separation of polar compounds. Chromatography theory predicts that small particles and long columns will yield high efficiency; however, little work has been done to prepare HILIC columns longer than 25 cm packed with sub-2 μm particles. In this work, we tested the slurry packing of 75 cm long HILIC columns with 1.7 μm bridged-ethyl-hybrid amide HILIC particles at 2,100 bar (30,000 PSI). Acetonitrile, methanol, acetone, and water were tested as slurry solvents, with acetonitrile providing the best columns. Slurry concentrations of 50-200 mg/mL were assessed, and while 50-150 mg/mL provided comparable results, the 150 mg/mL columns provided the shortest packing times (9 min). Columns prepared using 150 mg/mL slurries in acetonitrile yielded a reduced minimum plate height (hmin) of 3.3 and an efficiency of 120,000 theoretical plates for acenaphthene, an unretained solute. Para-toluenesulfonic acid produced the lowest hmin of 1.9 and the highest efficiency of 210,000 theoretical plates. These results identify conditions for producing high-efficiency HILIC columns with potential applications to complex mixture analysis.

Preparation of polyacrylamide hydrophilic stationary phases with adjustable performance

Polymer modified silica materials are widely used as stationary phases in hydrophilic interaction liquid chromatography (HILIC), whereas a stationary phase with excellent performance is highly desired. In this study, vinyl modified silica was first synthesized through a silane coupling reaction, and then a polyacrylamide modified silica (PAM-SIL) stationary phase was successfully prepared using acrylamide as a copolymer monomer via free radical polymerization. The retention behaviors of polar analytes on the stationary phase under various chromatographic conditions, including acetonitrile content, buffer concentration and pH values were investigated, and a typical hydrophilic interaction retention mechanism was inferred. Exceptionally, the separation performance of the stationary phases could be regulated by controlling the polymer structure. Model analytes separated rapidly on the stationary phase which has an optimal grafting amount of vinyl, with the highest number of theoretical plates of orotic acid reaching 119,966/m. While the stationary phases with high acrylamide concentrations exhibited enhanced retention behavior and higher resolution for analytes. The adjustable separation performance will have huge potential in future separation and analysis applications.

Trends in monoliths: Packings, stationary phases and nanoparticles

Monoliths media are gaining interest as excellent substitutes to conventional particle-packed columns. Monolithic columns show higher permeability and lower flow resistance than conventional liquid chromatography columns, providing high-throughput performance, resolution and separation in short run times. Monolithic columns with longer length, smaller inner diameter and specific selectivity to peptides or enantiomers have been played important role in hyphenated system. Monolithic stationary phases possess great efficiency, resolution, selectivity and sensitivity in the separation of complex biological samples, such as the complex mixtures of peptides for proteome analysis. The development of monolithic stationary phases has opened the new avenue in chromatographic separation science and is in turn playing much more important roles in the wide application area. Monolithic stationary phases have been widely used in fast and high efficiency one- and multi-dimensional separation systems, miniaturized devices, and hyphenated system coupled with mass spectrometers. The developing technology for preparation of monolithic stationary phases is revolutionizing the column technology for the separation of complex biological samples. These techniques using porous monoliths offer several advantages, including miniaturization and on-line coupling with analytical instruments. Additionally, monoliths are ideal support media for imprinting template-specific sites, resulting in the so-called molecularly-imprinted monoliths, with ultra-high selectivity. In this review, the origin of the concept, the differences between their characteristics and those of traditional packings, their advantages and drawbacks, theory of separations, the methods for the monoliths preparation of different forms, nanoparticle monoliths and metal-organic framework are discussed. Two application areas of monolithic metal-organic framework and nanoparticle monoliths are provided. The review article discusses the results reported in a total of 218 references. Other older references were included to illustrate the historical development of monoliths, both in preparation and types, as well as separation mechanism.

Comparison of the steric selectivity on hydrophilic interaction chromatography columns modified with poly(acrylamide) possessing different morphology

Poly(acrylamide) (PAAm)-modified hydrophilic interaction chromatography (HILIC) columns were prepared via surface-initiated atom transfer radical polymerization (SI-ATRP) and free radical polymerization (FRP) to generate brush-like and mushroom-like polymer chains on silica particles, respectively. The maltose homologues (MHs) and cyclodextrins (CDs) were chosen as analytes to evaluate steric selectivity by the different polymer morphologies in the ATRP-PAAm and the FRP-PAAm columns. The ATRP-PAAm exhibited superior retention than the FRP-PAAm and three commercial HILIC columns. The house-made PAAm columns provided significant hydrophilicity that enabled to analysis the oligosaccharides even in 60:40 mixture of acetonitrile-aqueous buffer. In the case of three ATRP-PAAm columns characterized by different polymer lengths and the density on the silica particles, those are different thickness of the water-enriched layer, and phase ratio φ, based on hydrophilicity of them columns. The logarithm of the retention factor (ln k) displayed a non-linear dependence on the inverse of the temperature (1/T, T = 278-333 K). Notably, a similar correlation was observed to exist between the logarithm of the phase ratio (ln φ), and 1/T. A van't Hoff plot was used to determine the thermodynamic parameters of the partition process for each MH. The values of the Gibbs free energy (ΔG°) for the analytes partition on the ATRP-PAAm columns were smaller than their counterparts measured for the FRP-PAAm columns; by contrast, the opposite trend was observed for the ΔG° values measured for CDs. The standard entropy ΔS° for MHs and CDs were comparable for the two types PAAm columns, while, the standard enthalpy, ΔH° displays significant difference between the ATRP and the FRP PAAm columns. These findings indicate that the differences between PAAm morphology and polymer densities on the stationary phase surface affect analyte differentiation on the basis of molecular steric factors. The higher selectivity for MHs and CDs displayed by ATRP-PAAm columns with respect to their FRP-PAAm and commercial amide columns will be useful for the fine separation of oligosaccharides.

Trimethylammonium modification of a polymer-coated monolith column for rapid and simultaneous analysis of nanomedicines

Drug-containing nanoparticles (nanomedicine) are ideal targeted-drug-delivery systems. However, methods for the simultaneous analysis of the drug within the nanoparticle and free drug in a short time are rather limited. In this study, we developed a polymer-modified monolithic column with cationic groups (trimethylammonium) for the simultaneous analysis of the drug within the nanoparticle and the free drug. The use of the acrylamide group was determined as the optimum connecting group, and the optimum concentration of the modifier was 6%. The prepared column retained the drug within the nanoparticle by anion exchange, and its elution time was controlled by the ionic concentration (tris(hydroxymethyl)aminomethane, Tris) of the mobile phase. The separation of two typical nanomedicines was studied on the prepared column. For DOXIL and Abraxane, the drugs within the nanoparticle were well separated from the free drugs, on the developed column. The developed polymer-coated monolithic column with trimethylammonium modification is expected to enable the rapid analysis of various nanomedicines.

High efficiency and simple preparation of polyacrylamide coated silica stationary phase for hydrophilic interaction liquid chromatography

A polyacrylamide (PAM)-coated silica packing as a novel stationary phase for hydrophilic interaction liquid chromatography (HILIC) was produced firstly by thermal immobilization. The coated layer was formed by a simple and facile physical method that dipping silica spheres into a PAM solution and then stirring the mixture until the solution was evaporated absolutely, leaving a certain amount of PAM on the silica particles. Although there are no chemical bonds involved, the bleeding measurement and the background noise are acceptable. Polyacrylamide coated silica (PAM-Sil, mean diameter: 5 μm) demonstrated a good hydrophilic property and excellent separation efficiency, which was observed especially for several high polar analytes such as saccharides. It is much higher than bare silica or amino columns under the same conditions. Moreover the obtained stationary phase demonstrated good stability under our operation conditions. The specific preparing method offers an easy and economical way to manipulate the thickness of PAM coating and can be extended as a universal way to produce various polymer coated stationary phases with dipping-heating/stirring-evaporating procedure.

A polyacrylamide-based silica stationary phase for the separation of carbohydrates using alcohols as the weak eluent in hydrophilic interaction liquid chromatography

A hydrophilic interaction liquid chromatography (HILIC) stationary phase was prepared by a two-step synthesis method, immobilizing polyacrylamide on silica sphere particles. The stationary phase (named PA, 5μm dia) was evaluated using a mixture of carbohydrates in HILIC mode and the column efficiency reached 121,000Nm^-1. The retention behavior of carbohydrates on PA stationary phase was investigated with three different organic solvents (acetonitrile, ethanol and methanol) employed as the weak eluent. The strongest hydrophilicity of PA stationary phase was observed in both acetonitrile and methanol as the weak eluent, when compared with another two amide stationary phases. Attributing to its high hydrophilicity, three oligosaccharides (xylooligosaccharide, fructooligosaccharide and chitooligosaccharides) presented good retention on PA stationary phase using alcohols/water as mobile phase. Finally, PA stationary phase was successfully applied for the purification of galactooligosaccharides and saponins of Paris polyphylla. It is feasible to use safer and cheaper alcohols to replace acetonitrile as the weak eluent for green analysis and purification of polar compounds on PA stationary phase.

Recent Progress in Monolithic Silica Columns for High-Speed and High-Selectivity Separations

Monolithic silica columns have greater (through-pore size)/(skeleton size) ratios than particulate columns and fixed support structures in a column for chemical modification, resulting in high-efficiency columns and stationary phases. This review looks at how the size range of monolithic silica columns has been expanded, how high-efficiency monolithic silica columns have been realized, and how various methods of silica surface functionalization, leading to selective stationary phases, have been developed on monolithic silica supports, and provides information on the current status of these columns. Also discussed are the practical aspects of monolithic silica columns, including how their versatility can be improved by the preparation of small-sized structural features (sub-micron) and columns (1 mm ID or smaller) and by optimizing reaction conditions for in situ chemical modification with various restrictions, with an emphasis on recent research results for both topics.

Monoliths in capillary electrochromatography and capillary liquid chromatography in conjunction with mass spectrometry

Here, we have reviewed separation studies utilizing monolithic capillary columns for separation of compounds preceding MS analysis. The review is divided in two parts according to the used separation method, namely CEC and capillary LC (cLC). Based on our overview, monolithic CEC-MS technique have been more focused on the syntheses of highly specialized and selective separation phase materials for fast and efficient separation of specific types of analytes. In contrast, monolithic cLC-MS is more widely used and is often employed, for instance, in the analysis of oligonucleotides, metabolites, and peptides and proteins in proteomic studies. While poly(styrene-divinylbenzene)-based and silica-based monolithic capillaries found their place in proteomic analyses, the other laboratory-synthesized monoliths still wait for their wider utilization in routine analyses. The development of new monolithic materials will most likely continue due to the demand of more efficient and rapid separation of increasingly complex samples.

Separation of nucleobases, nucleosides, and nucleotides using two zwitterionic silica-based monolithic capillary columns coupled with tandem mass spectrometry

The capability of employing synthesized zwitterionic silica-based monolithic capillary columns (140 mm × 0.1mm) for separation of highly polar and hydrophilic nucleobases, nucleosides, and nucleotides in hydrophilic interaction chromatography is reported. The suitability of the columns for on-line conjunction with electrospray tandem mass spectrometry was explored. Our results show that the grafted layer of zwitterionic monomer ([2-(methacryloyloxy)ethyl]-dimethyl-(3-sulfopropyl)-ammonium hydroxide or 2-methacryloyloxyethyl phosphorylcholine) on the silica monolithic surface significantly improved the separation selectivity and reproducibility, as compared to the bare silica monolith. The stepwise elution from 90% to 70% of acetonitrile enabled separation of a complex sample mixture containing 21 compounds with a total analysis time less than 40 min.

Functionalized ceramics for biomedical, biotechnological and environmental applications

Surface functionalization has become of paramount importance and is considered a fundamental tool for the development and design of countless devices and engineered systems for key technological areas in biomedical, biotechnological and environmental applications. In this review, surface functionalization strategies for alumina, zirconia, titania, silica, iron oxide and calcium phosphate are presented and discussed. These materials have become particularly important concerning the aforementioned applications, being not only of great academic, but also of steadily increasing human and commercial, interest. In this review, special emphasis is given to their use as biomaterials, biosensors, biological targets, drug delivery systems, implants, chromatographic supports for biomolecule purification and analysis, and adsorbents for toxic substances and pollutants. The objective of this review is to provide a broad picture of the enormous possibilities offered by surface functionalization and to identify particular challenges regarding surface analysis and characterization.

Facile preparation of organic-silica hybrid monolith for capillary hydrophilic liquid chromatography based on "thiol-ene" click chemistry

In this work, a one-step approach to facile preparation of organic-inorganic hybrid monoliths was successfully developed. After vinyl-end organic monomers and azobisisobutyronitrile (AIBN) were mixed with hydrolyzed tetramethoxysilane (TMOS) and 3-mercaptopropyltrimethoxysilane (MPTMS), the homogeneous mixture was introduced into a fused-silica capillary for simultaneous polycondensation and "thiol-ene" click reaction to form the organic-silica hybrid monoliths. By employing this strategy, two types of organic-silica hybrid monoliths with positively charged quaternary ammonium and amide groups were prepared, respectively. The functional groups were successfully introduced onto the monoliths during the sol-gel process with "thiol-ene" click reaction, which was demonstrated by ζ-potential assessment, energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared (FT-IR) spectroscopy. The porous structure of the prepared monolithic columns was examined by scanning electron microscopy (SEM), nitrogen adsorption-desorption measurement, and mercury intrusion porosimetry. These results indicate the prepared organic-silica hybrid monoliths possess homogeneous column bed, large specific surface area, good mechanical stability, and excellent permeability. The prepared monolithic columns were then applied for anion-exchange/hydrophilic interaction liquid chromatography. Different types of analytes, including benzoic acids, inorganic ions, nucleosides, and nucleotides, were well separated with high column efficiency around 80,000-130,000 plates/m. Taken together, we present a facile and universal strategy to prepare organic-silica hybrid monoliths with a variety of organic monomers using one-step approach.

Protein UTLC-MALDI-MS using thin films of submicrometer silica particles

Slides for ultra thin-layer chromatography (UTLC) were made by coating nonporous silica particles, chemically modified with polyacrylamide, as 15 μm films on glass or silicon. Three proteins, myoglobin, cytochrome c and lysozyme, are nearly baseline resolved by the mechanism of hydrophilic interaction chromatography. A plate height as low as 3 μm, with 3900 plates, is observed in 14 mm. Varying silica particle diameter among 900, 700 and 350 nm showed that decreasing particle diameter slightly improves resolution but slows the separation. Matrix-assisted laser desorption/ionization (MALDI)-MS of the proteins after separation is demonstrated by wicking sufficient sinapinic acid into the separation medium.

N-methylimidazolium-functionalized monolithic silica column for mixed-mode chromatography

The development of mixed-mode stationary phase to achieve multiple separation capabilities in one column is very important for high performance liquid chromatography. In this paper, a new specific stationary phase based on grafting N-methylimidazolium to a monolithic silica column was successfully prepared for performing capillary liquid chromatography. The characteristics of the column were evaluated by the separation of different types of compounds including inorganic anions, aromatic acids, nucleotides, polycyclic aromatic hydrocarbons, alkylbenzenes, and phenols. The mechanisms for the separation of these compounds were investigated and appeared to involve the mixed interactions including anion-exchange, hydrophilic, π-π, dipole-dipole, and hydrophobic interactions.

Stationary and mobile phases in hydrophilic interaction chromatography: a review

Hydrophilic interaction chromatography (HILIC) is valuable alternative to reversed-phase liquid chromatography separations of polar, weakly acidic or basic samples. In principle, this separation mode can be characterized as normal-phase chromatography on polar columns in aqueous-organic mobile phases rich in organic solvents (usually acetonitrile). Highly organic HILIC mobile phases usually enhance ionization in the electrospray ion source of a mass spectrometer, in comparison to mobile phases with higher concentrations of water generally used in reversed-phase (RP) LC separations of polar or ionic compounds, which is another reason for increasing popularity of this technique. Various columns can be used in the HILIC mode for separations of peptides, proteins, oligosaccharides, drugs, metabolites and various natural compounds: bare silica gel, silica-based amino-, amido-, cyano-, carbamate-, diol-, polyol-, zwitterionic sulfobetaine, or poly(2-sulphoethyl aspartamide) and other polar stationary phases chemically bonded on silica gel support, but also ion exchangers or zwitterionic materials showing combined HILIC-ion interaction retention mechanism. Some stationary phases are designed to enhance the mixed-mode retention character. Many polar columns show some contributions of reversed phase (hydrophobic) separation mechanism, depending on the composition of the mobile phase, which can be tuned to suit specific separation problems. Because the separation selectivity in the HILIC mode is complementary to that in reversed-phase and other modes, combinations of the HILIC, RP and other systems are attractive for two-dimensional applications. This review deals with recent advances in the development of HILIC phase separation systems with special attention to the properties of stationary phases. The effects of the mobile phase, of sample structure and of temperature on separation are addressed, too.

Agglomerated silica monolithic column for hydrophilic interaction LC

Hydrophilic interaction LC (HILIC) has gained wide acceptance in recent years due to its ability to retain and separate polar compounds such as pharmaceuticals. Most commercial HILIC phases are particle based, which limit the speed with which HILIC separations can be performed. Herein, agglomerated silica monolithic columns are prepared by electrostatically attaching polyionic latex particles onto a silica monolith by simply flushing a suspension of the ionic latex through a silica monolith. Such phases retain the high efficiency and permeability of the native silica monolith, while the agglomerated phase is easy to introduce and provides excellent mass transfer. High %ACN in the mobile phase dramatically increases the efficiency and retention, consistent with HILIC behavior. Test analytes such as benzoates, nucleotides and amino acids are separated with plate heights of 25-110 microm. The high permeability of monoliths allows HILIC separations to be performed with baseline resolution in less than 15 s. Electrostatic repulsion-hydrophilic liquid interaction chromatographic retention behavior of the latex-coated monoliths is verified using amino acids as test analytes.

Preparation of chitosan functionalized monolithic silica column for hydrophilic interaction liquid chromatography

A novel cationic hydrophilic interaction monolithic stationary phase based on the chemical modification of carboxymethyl chitosan (CMCH) to the monolithic silica skeleton using carbodiimide as an activation reagent was prepared for performing capillary liquid chromatography. The amino and hydroxy moieties of CMCH functioned as both the ion-exchange sites and polar providers. The performance of the column was studied by the separation of polar acidic compounds. The chitosan functionalized monolithic silica column showed good selectivity for nucleosides, nucleotides, aromatic acids and aliphatic acids. The mechanism for the separation of these compounds was also studied. The results showed that these compounds were separated primarily based on the hydrophilic interaction mechanism.