Ion-selective electrode for measuring low Ca2+ concentrations in the presence of high K+, Na+ and Mg2+ background

Integrated biosensor platform based on graphene transistor arrays for real-time high-accuracy ion sensing

Two-dimensional materials such as graphene have shown great promise as biosensors, but suffer from large device-to-device variation due to non-uniform material synthesis and device fabrication technologies. Here, we develop a robust bioelectronic sensing platform  composed of  more than 200 integrated sensing units, custom-built high-speed readout electronics, and machine learning inference that overcomes these challenges to achieve rapid, portable, and reliable measurements. The platform demonstrates reconfigurable multi-ion electrolyte sensing capability and provides highly sensitive, reversible, and real-time response for potassium, sodium, and calcium ions in complex solutions despite variations in device performance. A calibration method leveraging the sensor redundancy and device-to-device variation is also proposed, while a machine learning model trained with multi-dimensional information collected through the multiplexed sensor array is used to enhance the sensing system’s functionality and accuracy in ion classification.

The potential of 2D materials for biosensing applications is often limited by large device-to-device variation. Here, the authors report a calibration method and a machine learning approach leveraging the redundancy of a sensing platform based on 256 integrated graphene transistors to enhance the system accuracy in real-time ion classification.

Reliable environmental trace heavy metal analysis with potentiometric ion sensors - reality or a distant dream

Over two decades have passed since polymeric membrane ion-selective electrodes were found to exhibit sufficiently lower detection limits. This in turn brought a great promise to measure trace level concentrations of heavy metals using potentiometric ion sensors at environmental conditions. Despite great efforts, trace analysis of heavy metals using ion-selective electrodes at environmental conditions is still not commercially available. This work will predominantly concentrate on summarizing and evaluating prospects of using potentiometric ion sensors in view of environmental determination of heavy metals in on-site and on-line analysis modes. Challenges associated with development of reliable potentiometric sensors to be operational in environmental conditions will be discussed and reasoning behind unsuccessful efforts to develop potentiometric on-site and on-line environmental ion sensors will be explored. In short, it is now clear that solely lowering the detection limit of the ion-selective electrodes does not guarantee development of successful sensors that would meet the requirement of environmental matrices over long term usage. More pressing challenges of the properties and the performance of the potentiometric sensors must be addressed first before considering extending their sensitivity to low analyte concentrations. These are, in order of importance, selectivity of the ion-selective membrane to main ion followed by the membrane resistance to parallel processes, such as water ingress to the ISM, light sensitivity, change in temperature, presence of gasses in solution and pH and finally resistance of the ion-selective membrane to fouling. In the future, targeted on-site and on-line environmental sensors should be developed, addressing specific environmental conditions. Thus, ion-selective electrodes should be developed with the intention to be suitable to the operational environmental conditions, rather than looking at universal sensor design validated in the idealized and simple sample matrices.

A Paper-Based Potentiometric Platform for Determination of Water Hardness

A novel paper-based potentiometric platform for the simple and fast monitoring of water hardness is presented. First, potentiometric ion-selective electrodes for calcium and magnesium printed on a paper substrate were built and optimized. These sensors, which display near-Nernstian sensitivity, were used for the determination of the concentration of these cations and the calculation of the water hardness. Second, the incorporation of a solid-state reference electrode allowed building an integrated paper-based potentiometric cell for the determination of the hardness of artificial and real samples (mineral waters). The validation of the results shows good ability to predict hardness in the conventional scale. Truly decentralized measurements were demonstrated by integration of a miniaturized instrument and dedicated software in a portable device. The measurements were able to be performed in just under two minutes, including a two-point calibration. Since the method is simple to use and cost-effective, it can be implemented in domestic and industrial settings.

Emulsion Doping of Ionophores and Ion-Exchangers into Ion-Selective Electrode Membranes

Ion-selective electrodes (ISEs) are widely used analytical devices to selectively measure ionic species. Despite significant advances in recent years, ion-selective membranes are still mostly prepared in the same manner, by preloading the selective components into a solvent that is subsequently cast into a membrane or film. This paper describes an alternative method to prepare ISE membranes by mass transfer of the sensing components from an emulsion phase. Specifically, blank (undoped) plasticized poly(vinyl chloride) (PVC) membranes mounted into an electrode body are immersed into an aqueous solution containing analyte ions and an appropriate emulsion of the desired sensing components to allow their transfer into the membrane. The concept is demonstrated with conventional membrane electrodes containing an inner solution as well as all-solid-state electrodes. It is shown to be universally useful for the realization of ISEs for K⁺, Na⁺, Ca²⁺, and NO₃^-.

An electronic tongue for simultaneous determination of Ca2+, Mg2+, K+ and NH4+ in water samples by multivariate calibration methods

In this study, a multi ion-selective electrode system was developed for simultaneous determination of Ca²⁺, Mg²⁺, K⁺ and NH₄⁺ ions. The system, called electronic tongue, was used for the quantitative determination of these ions in different water samples. The measurement system was comprised of sixteen ion-selective electrodes, an Ag/AgCl double-junction reference electrode, and a sixteen-channel multi-potentiometer. In the fabrication process of the electronic tongue, an electrode body, which comprised eight ion-selective electrodes together on it, was designed. The obtained data were evaluated by using multivariate calibration methods such as Classical Least Squares (CLS), Principal Component Regression (PCR) and Partial Least Squares (PLS1). The parameters that influence the electronic tongue performance were investigated. Analyses were conducted in synthetic water samples and real water samples. Percentage recovery values in synthetic samples, which were calculated via PLS1, were found 101.35%, 102.41%, 100.04% and 99.23% for Ca²⁺, Mg²⁺, K⁺ and NH₄⁺ respectively. The results, obtained from the electronic tongue and other analytical techniques, were compared and no significant difference was found between the results at 95% confidence level.

Modified Diamide and Phosphine Oxide Extracting Compounds as Membrane Components for Cross-Sensitive Chemical Sensors

This research is devoted to the development and study of novel cross-sensitive sensors based on modified extracting ligands. According to the previous results of liquid extraction studies, the chemical modification of membrane active components would change the analytical characteristics of a sensor comprising them. The sensing elements of the studied sensors consisted of various derivatives of N,N,N′,N′-tetraoctyldiamide of diglycolic acid (TODGA) and di-phenyl-N,N-di-i-sobutylcarbamoylmethylen phoshine oxide (CMPO) used as neutral carriers, CCD (chlorinated cobalt dicarbollide) as a lipophilic additive, different plasticizers, and poly(vinyl chloride) (PVC) as a polymer. TODGA-based sensors demonstrated a stable and reproducible response towards rare earth cations in acidic media (pH = 2). Changing the concentrations and ratio of neutral carriers and the lipophilic additive, it is possible to modify the sensitivity and selectivity of the sensors towards the same target ions. Bonded ligands, such as cobalt dicarbollide covalently attached to TODGA and CMPO, exhibited lower selectivity and sensitivity to rare earth cations. A possibility to vary the cross-sensitivity patterns of the sensors in a wide range might be of great interest for the development of multisensor systems allowing the simultaneous determination of several analytes in multicomponent solutions.

Three-dimensional microfluidic paper-based device for multiplexed colorimetric detection of six metal ions combined with use of a smartphone

A simple double-layered three-dimensional (3D) microfluidic paper-based analytical device (μPAD) was designed for the simultaneous determination of six metal ions-Fe(III), Ni(II), Cr(VI), Cu(II), Al(III), and Zn(II)-for the first time. The 3D μPAD was composed of two paper layers: a top pretreatment layer and a bottom colorimetric detection layer. The sample solution added to the central sample reservoir of the 3D μPAD could be automatically divided into eight flow pathways and be automatically pretreated while flowing through the pretreatment zones located in the microfluidic channels, and automatically carried out the chromogenic reactions after reaching the detection zones. Random diffusion of the chromogenic reagents was effectively prevented by transport of the pretreated sample solution to the detection zones through 3D microfluidic channels with an L-type circuitous flow route design, resulting in highly increased color uniformity and reproducibility. Combined with use of a flat LED lamp as an upward lighting source and a smartphone as a convenient detector, improved color perception, highly enhanced sensitivity, and an extended detection range were obtained. Finally, the double-layered 3D μPAD was applied to the multiplexed determination of the six metal ions in mixtures and environmental samples with satisfactory results. Detection limits as low as 0.2, 0.3, 0.1, 0.03, 0.08, and 0.04 mg/L for Fe(III), Ni(II), Cr(VI), Cu(II), Al(III), and Zn(II) detection, respectively, were achieved, which are about one order of magnitude lower than obtained with previously reported μPADs for the detection of metal ions. The present 3D μPAD is simple, fast, selective, sensitive, and user-friendly, and holds great application potential for multiplexed on-site analysis.

Potentiometric flow injection system for determination of reductants using a polymeric membrane permanganate ion-selective electrode based on current-controlled reagent delivery

A polymeric membrane permanganate-selective electrode has been developed as a current-controlled reagent release system for potentiometric detection of reductants in flow injection analysis. By applying an external current, diffusion of permanganate ions across the polymeric membrane can be controlled precisely. The permanganate ions released at the sample-membrane interface from the inner filling solution of the electrode are consumed by reaction with a reductant in the sample solution thus changing the measured membrane potential, by which the reductant can be sensed potentiometrically. Ascorbate, dopamine and norepinephrine have been employed as the model reductants. Under the optimized conditions, the potential peak heights are proportional to the reductant concentrations in the ranges of 1.0×10(-5) to 2.5×10(-7)M for ascorbate, of 1.0×10(-5) to 5.0×10(-7)M for dopamine, and of 1.0×10(-5) to 5.0×10(-7)M for norepinephrine, respectively with the corresponding detection limits of 7.8×10(-8), 1.0×10(-7) and 1.0×10(-7)M. The proposed system has been successfully applied to the determination of reductants in pharmaceutical preparations and vegetables, and the results agree well with those of iodimetric analysis.

Ion Selective Electrodes (ISEs) and interferences--a review

Ion Selective Electrodes (ISEs) are used to measure some of the most critical analytes on clinical laboratory and point-of-care analysers. These analytes which include Na(+), K(+), Cl(-), Ca(2+), Mg(2+) and Li(+) are used for rapid patient care decisions. Although the electrodes are very selective, they are not free of interferences. It is important for laboratories to have an understanding of the type and extent of interferences in order to avoid incorrect clinical decisions and treatment.

Developments in the Field of Conducting and Non-conducting Polymer Based Potentiometric Membrane Sensors for Ions Over the Past Decade

Many research studies have been conducted on the use of conjugated polymers in the construction of chemical sensors including potentiometric, conductometric and amperometric sensors or biosensors over the last decade. The induction of conductivity on conjugated polymers by treating them with suitable oxidizing agents won Heeger, MacDiarmid and Shirakawa the 2000 Nobel Prize in Chemistry. Common conjugated polymers are poly(acetylene)s, poly(pyrrole)s, poly(thiophene)s, poly(terthiophene)s, poly(aniline)s, poly(fluorine)s, poly(3-alkylthiophene)s, polytetrathiafulvalenes, polynapthalenes, poly(p-phenylene sulfide), poly(p-phenylenevinylene)s, poly(3,4-ethylenedioxythiophene), polyparaphenylene, polyazulene, polyparaphenylene sulfide, polycarbazole and polydiaminonaphthalene. More than 60 sensors for inorganic cations and anions with different characteristics based on conducting polymers have been reported. There have also been reports on the application of non-conducting polymers (nCPs), i.e. PVC, in the construction of potentiometric membrane sensors for determination of more than 60 inorganic cations and anions. However, the leakage of ionophores from the membranes based on these polymers leads to relatively lower life times. In this article, we try to give an overview of Solid-Contact ISE (SCISE), Single-Piece ISE (SPISE), Conducting Polymer (CP)-Based, and also non-conducting polymer PVC-based ISEs for various ions which their difference is in the way of the polymer used with selective membrane. In SCISEs and SPISEs, the plasticized PVC containing the ionophore and ionic additives govern the selectivity behavior of the electrode and the conducting polymer is responsible of ion-to-electron transducer. However, in CPISEs, the conducting polymer layer is doped with a suitable ionophore which enhances the ion selectivity of the CP while its redox response has to be suppressed.