Application of hydrocyanic acid vapor generation via focused microwave radiation to the preparation of industrial effluent samples prior to free and total cyanide determinations by spectrophotometric flow injection analysis

Efficient salt-aided aqueous extraction of bitter almond oil

BACKGROUND

Salt-aided aqueous extraction (SAAE) is an inexpensive and environmentally friendly method of oil extraction that is influenced by many factors. In the present study, we investigated the effect of SAAE on bitter almond oil yield.

RESULTS

This study used sodium bicarbonate solution as extraction solvent and the optimal extraction parameters predicted by Box-Behnken design (i.e., concentration of sodium bicarbonate, 0.4 mol L^-1 ; solvent-to-sample ratio, 5:1; extraction temperature, 84 °C; extraction time, 60 min), for oil recovery of 90.9%. The physiochemical characteristics of the extracted oil suggest that the quality was similar to that of the aqueous enzymatic extracted oil. Moreover, the content of hydrocyanic acid (HCN) in bitter almond oil was found to be less than 5 mg kg^-1 , which was lower compared to that obtained by other reported methods. Results of microanalysis indicated that SAAE led to significant improvement in oil yield by allowing the release of oil and decreasing the emulsion fraction. Therefore, extraction of bitter almond oil by SAAE is feasible.

CONCLUSION

These results demonstrate that extraction of bitter almond oil by SAAE based on the salt effect is feasible on a laboratory scale. © 2017 Society of Chemical Industry.

Structural modeling and analysis of an effluent treatment process for electroplating--a graph theoretic approach

An attempt is made to address a few ecological and environment issues by developing different structural models for effluent treatment system for electroplating. The effluent treatment system is defined with the help of different subsystems contributing to waste minimization. Hierarchical tree and block diagram showing all possible interactions among subsystems are proposed. These non-mathematical diagrams are converted into mathematical models for design improvement, analysis, comparison, storage retrieval and commercially off-the-shelf purchases of different subsystems. This is achieved by developing graph theoretic model, matrix models and variable permanent function model. Analysis is carried out by permanent function, hierarchical tree and block diagram methods. Storage and retrieval is done using matrix models. The methodology is illustrated with the help of an example. Benefits to the electroplaters/end user are identified.

Headspace single-drop microextraction and cuvetteless microspectrophotometry for the selective determination of free and total cyanide involving reaction with ninhydrin

Headspace single-drop microextraction has been used for the determination of cyanide with ninhydrin in combination with fibre-optic-based cuvetteless microspectrophotometry which accommodates sample volume of 1 microL placed between the two ends of optical fibres, and has been found to avoid salient drawbacks of batch methods. This method involved hydrocyanic acid formation in a closed vial, and simultaneous extraction and reaction with 2 microL drop of ninhydrin in carbonate medium suspended at the tip of a microsyringe needle held in the headspace of the acidified sample solution. The method was linear in range 0.025-0.5 mg L(-1) of cyanide. The headspace reaction was free from the interference of substances, e.g., thiocyanate, hydrazine sulphate, hydroxylammonium chloride and ascorbic acid. Sulphide was masked by cadmium sulphate, nitrite by sulphamic acid, sulphite by N-ethylmaleimide, and halogens by ascorbic acid. The limit of detection was found to be 4.3 microg L(-1) of cyanide which was comparable to existing most sensitive methods for cyanide. However, the present method is far more simple. The method was applied to acid-labile and metal cyanides complexes by treatment with sulphide when metal sulphides were precipitated setting cyanide ion free, and to iron(II) and (III) cyanide complexes by their decomposition with mercury(II), the mercury(II) cyanide formed was then determined. These pre-treatment methods avoided cumbersome pre-separation of cyanide by methods such as distillation or gas diffusion. The overall recovery of cyanide in diverse samples was 97% with RSD of 3.9%.