Combining microchip and cell technology for creation of novel biodevices

Closed-loop feedback control of microfluidic cell manipulation via deep-learning integrated sensor networks

Microfluidic technologies have long enabled the manipulation of flow-driven cells en masse under a variety of force fields with the goal of characterizing them or discriminating the pathogenic ones. On the other hand, a microfluidic platform is typically designed to function under optimized conditions, which rarely account for specimen heterogeneity and internal/external perturbations. In this work, we demonstrate a proof-of-principle adaptive microfluidic system that consists of an integrated network of distributed electrical sensors for on-chip tracking of cells and closed-loop feedback control that modulates chip parameters based on the sensor data. In our system, cell flow speed is measured at multiple locations throughout the device, the data is interpreted in real-time via deep learning-based algorithms, and a proportional-integral feedback controller updates a programmable pressure pump to maintain a desired cell flow speed. We validate the adaptive microfluidic system with both static and dynamic targets and also observe a fast convergence of the system under continuous external perturbations. With an ability to sustain optimal processing conditions in unsupervised settings, adaptive microfluidic systems would be less prone to artifacts and could eventually serve as reliable standardized biomedical tests at the point of care.

Fluidic Culture and Analysis of Pulmonary Artery Smooth Muscle Cells for the Study of Pulmonary Hypertension

There is an urgent need to develop novel in-vitro models to mimic the disease conditions in pulmonary hypertension (PH). We developed a microfluidic cell culture device for PH studies that withstood high shear stress. Techniques were also developed for cell recovery from the microchannel and mRNA isolation from the collected cells. Using this device, we found that shear stress caused a 7.5-fold increase in the transcription levels of a PH-related molecule, Cyclin D1.

Enhanced Cell Adhesion on a Nano-Embossed, Sticky Surface Prepared by the Printing of a DOPA-Bolaamphiphile Assembly Ink

Inspired by adhesive mussel proteins, nanospherical self-assemblies were prepared from bolaamphiphiles containing 3,4-dihydroxyphenylalanine (DOPA) moieties, and a suspension of the bolaamphiphile assemblies was used for the preparation of a patterned surface that enhanced cell adhesion and viability. The abundant surface-exposed catechol groups on the robust bolaamphiphile self-assemblies were responsible for their outstanding adhesivity to various surfaces and showed purely elastic mechanical behaviour in response to tensile stress. Compared to other polydopamine coatings, the spherical DOPA-bolaamphiphile assemblies were coated uniformly and densely on the surface, yielding a nano-embossed surface. Cell culture tests on the surface modified by DOPA-bolaamphiphiles also showed enhanced cellular adhesivity and increased viability compared to surfaces decorated with other catecholic compounds. Furthermore, the guided growth of a cell line was demonstrated on the patterned surface, which was prepared by inkjet printing using a suspension of the self-assembled particles as an ink. The self-assembly of DOPA-bolaamphiphiles shows that they are a promising adhesive, biocompatible material with the potential to modify various substances.

An iridium oxide microelectrode for monitoring acute local pH changes of endothelial cells

A microelectrode on a chip was modified to detect the local pH changes of the attached endothelial cells under the stimulation of thrombin.

Control of cultured human cells with femtosecond laser ablated patterns on steel and plastic surfaces

The purpose of the present study is to explore topographical patterns produced with femtosecond laser pulses as a means of controlling the behaviour of living human cells (U2OS) on stainless steel surfaces and on negative plastic imprints (polycarbonate). The results show that the patterns on both types of material strongly affect cell behaviour and are particularly powerful in controlling cell spreading/elongation, localization and orientation. Analysis by fluorescence and scanning electron microscopy shows that on periodic 1D grating structures, cells and cell nuclei are highly elongated and aligned, whereas on periodic 2D grid structures, cell spreading and shape is affected. The results also show that the density and morphology of the cells can be affected. This was observed particularly on pseudo-periodic, coral-like structures which clearly inhibited cell growth. The results suggest that these patterns could be used in a variety of applications among the fields of clinical research and implant design, as well as in diagnosis and in cell and drug research. Furthermore, this article highlights the noteworthy aspects and the unique strengths of the technique and proposes directions for further research.

Microchip-based electrochemical detection for monitoring cellular systems

The use of microchip devices to study cellular systems is a rapidly growing research area. There are numerous advantages of using on-chip integrated electrodes to monitor various cellular processes. The purpose of this review is to give examples of advancements in microchip-based cellular analysis, specifically where electrochemistry is used for the detection scheme. These examples include on-chip detection of single-cell quantal exocytosis, electrochemical analysis of intracellular contents, the ability to integrate cell culture/immobilization with electrochemistry, and the use of integrated electrodes to ensure cell confluency in longer-term cell culture experiments. A perspective on future trends in this area is also given.

Miniaturization of biological assays -- overview on microwell devices for single-cell analyses

BACKGROUND

Today, cells are commonly analyzed in ensembles, i.e. thousands of cells per sample, yielding results on the average response of the cells. However, cellular heterogeneity implies the importance of studying how individual cells respond, one by one, in order to learn more about drug targeting and cellular behavior.

SCOPE OF REVIEW

This review discusses general aspects on miniaturization of biological assays and in particular summarizes single-cell assays in microwell formats. A range of microwell-based chips are discussed with regard to their well characteristics, cell handling, choice of material etc. along with available detection systems for single-cell studies. History and trends in microsystem technology, various commonly used materials for device fabrication, and conventional methods for single-cell analysis are also discussed, before a closing section with a detailed example from our research in the field.

MAJOR CONCLUSIONS

A range of miniaturized and microwell devices have shown useful for studying individual cells.

GENERAL SIGNIFICANCE

In vitro assays offering low volume sampling and rapid analysis in a high-throughput manner are of great interest in a wide range of single-cell applications. Size compatibility between a cell and micron-sized tools has encouraged the field of micro- and nanotechnologies to move into areas such as life sciences and molecular biology. To test as many compounds as possible against a given amount of patient sample requires miniaturized tools where low volume sampling is sufficient for accurate results and on which a high number of experiments per cm(2) can be performed. This article is part of a Special Issue entitled Nanotechnologies - Emerging Applications in Biomedicine.

Artificial chaperone-assisted refolding in a microchannel

Protein refolding using a simple dilution method in a microchannel often led to the formation of protein aggregates, which bound to the microchannel wall, resulting in low refolding yields. To inhibit aggregation and improve refolding yields, an artificial chaperone-assisted (ACA) refolding, which employed detergents and beta-cyclodextrin was used. Model proteins, hen egg white lysozyme and yeast alpha-glucosidase, were successfully refolded in a microchannel. The microscopic observation showed that the ACA method suppressed protein aggregation and facilitated the refolding of lysozyme, whereas significant aggregation was observed when a simple dilution method was employed. The ACA method increased the lysozyme refolding yield by 40% over the simple dilution approach. Similarly, for a-glucosidase, the refolding yield using the ACA method (ca. 50%) was approximately three times compared with the simple dilution method. The ACA refolding method is a suitable approach to use in the refolding of proteins using a microfluidic system.