Automated on-line in-tube solid-phase microextraction coupled with HPLC/MS/MS for the determination of butyrophenone derivatives in human plasma

Triazine-based covalent porous organic polymer for the online in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons prior to high-performance liquid chromatography-diode array detection

A triazine-based covalent organic porous polymer (COP) was synthesized from the monomers 1,3,5-triphenylbenzene and tricyanogen chloride via the Friedel-Crafts reaction and characterized in detail using Brunauer-Emmett-Teller analysis, X-ray photoelectron spectroscopy, elemental analysis, and scanning electron microscopy, which confirmed that the COP had a rough surface and suitable extraction site. It was then employed in in-tube solid-phase microextraction combined with a high-performance liquid chromatography-diode array detector. The COP adsorbent was evaluated with different types of analyte, including estrogens, polycyclic aromatic hydrocarbons (PAHs), and plasticizers. The COP produced its best performance with PAHs. In order to obtain the highest extraction efficiency for PAHs, the main influential factors were optimized. Furthermore, a sensitive analytical method was established with the limits of detection of 0.004-0.010 µg L^-1, high enrichment factor of 1110-2763, and wide linear ranges (0.013-20.0 µg L^-1, 0.016-20.0 µg L^-1 and 0.033-20.0 µg L^-1). The relative standard deviation in intra-day and inter-day tests was also controlled to be within 0.3-3.1%. The proposed method was employed in the online detection of trace PAHs in real water samples, with satisfactory results obtained.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.

SPME techniques for biomedical analysis

Biomedical analyses of drugs and their metabolites are important in new drug development, therapeutic drug monitoring and forensic toxicology. In these analyses, sample preparation is very important to isolate target compounds from complex biological matrices and markedly influences the reliability and accuracy of determination. SPME is a simple and convenient sample preparation technique that has enabled automation, miniaturization and high-throughput performance. This article focuses on current developments, their biomedical applications and future trends with emphasis on new extraction devices using selective polymer coating materials in novel SPME techniques, including fiber SPME, in-tube SPME and related techniques.

Therapeutic drug monitoring of common antipsychotics

The aim of this review is to provide information for interpreting outcome results from monitoring of antipsychotics in biological samples. A brief overview of the working mechanisms, pharmacological effects, drug interactions, and analytical methods of classical and atypical antipsychotics is given. Nineteen antipsychotics were selected based on their importance in the worldwide market as follows: amisulpride, aripiprazole, asenapine, bromperidol, clozapine, flupenthixol, haloperidol, iloperidone, lurasidone, olanzapine, paliperidone, perphenazine, pimozide, pipamperone, quetiapine, risperidone, sertindole, sulpiride, and zuclopenthixol. A straightforward relationship between administered dose, plasma or serum concentration, clinical outcome, or adverse effects is often lacking. Nowadays, focus lies on therapeutic drug monitoring and individualized therapy to find adequate treatment, to explain treatment failure or nonresponse, and to check patient compliance. However, extensive research in this field is still mandatory.

Direct bioanalytical sample injection with 2D LC–MS

New analytical platforms have been developed in response to the need for attaining increased peak capacity for multicomponent complex analysis with higher sensitivity and characterization of the analytes, and high-throughput capabilities. This review outlines the fundamental principles of target and comprehensive 2D LC method development and encompasses applications of LC–LC and LC × LC coupled to MS in bioanalysis using a variety of online analytical procedures. It also provides a rationale for the usage of the most employed mass analyzers and ionization sources on these platforms.

Role of microextraction sampling procedures in forensic toxicology

The last two decades have provided analysts with more sensitive technology, enabling scientists from all analytical fields to see what they were not able to see just a few years ago. This increased sensitivity has allowed drug detection at very low concentrations and testing in unconventional samples (e.g., hair, oral fluid and sweat), where despite having low analyte concentrations has also led to a reduction in sample size. Along with this reduction, and as a result of the use of excessive amounts of potentially toxic organic solvents (with the subsequent environmental pollution and costs associated with their proper disposal), there has been a growing tendency to use miniaturized sampling techniques. Those sampling procedures allow reducing organic solvent consumption to a minimum and at the same time provide a rapid, simple and cost-effective approach. In addition, it is possible to get at least some degree of automation when using these techniques, which will enhance sample throughput. Those miniaturized sample preparation techniques may be roughly categorized in solid-phase and liquid-phase microextraction, depending on the nature of the analyte. This paper reviews recently published literature on the use of microextraction sampling procedures, with a special focus on the field of forensic toxicology.

Recent advances in column switching sample preparation in bioanalysis

Column switching techniques, using two or more stationary phase columns, are useful for trace enrichment and online automated sample preparation. Target fractions from the first column are transferred online to a second column with different properties for further separation. Column switching techniques can be used to determine the analytes in a complex matrix by direct sample injection or by simple sample treatment. Online column switching sample preparation is usually performed in combination with HPLC or capillary electrophoresis. SPE or turbulent flow chromatography using a cartridge column and in-tube solid-phase microextraction using a capillary column have been developed for convenient column switching sample preparation. Furthermore, various micro-/nano-sample preparation devices using new polymer-coating materials have been developed to improve extraction efficiency. This review describes current developments and future trends in novel column switching sample preparation in bioanalysis, focusing on innovative column switching techniques using new extraction devices and materials.

Simultaneous RP-HPLC-DAD quantification of bromocriptine, haloperidol and its diazepane structural analog in rat plasma with droperidol as internal standard for application to drug-interaction pharmacokinetics

A simple and rapid RP-HPLC-DAD method was developed and validated for simultaneous determination of the dopamine antagonists haloperidol, its diazepane analog, and the dopamine agonist bromocriptine in rat plasma, to perform pharmacokinetic drug-interaction studies. Samples were prepared for analysis by acetonitrile (22.0 microg/mL) plasma protein precipitation with droperidol as an internal standard, followed by a double-step liquid-liquid extraction with hexane : chloroform (70:30) prior to C-18 separation. Isocratic elution was achieved using a 0.1% (v/v) trifluoroacetic acid in deionized water, methanol and acetonitrile (45/27.5/27.5, v/v/v). Triple-wavelength diode-array detection at the lambda(max) of 245 nm for haloperidol, 254 nm for the diazepane analog and droperidol, and 240 nm for bromocriptine was carried out. The LLOQ of DAL, HAL, and BCT were 45.0, 56.1, and 150 ng/mL, respectively. In rats, the estimated pharmacokinetic parameters (i.e., t(1/2), CL, and V(ss)) of HAL when administered with DAL and BCT were t(1/2) = 16.4 min, V(ss) = 0.541 L/kg for HAL, t(1/2) = 28.0 min, V(ss) = 2.00 L/kg for DAL, and t(1/2) = 24.0 min, V(ss) = 0.106 L/kg for BCT. The PK parameters for HAL differed significantly from those previously reported, which may be an indication of a drug-drug interaction.

Enantioselective analysis of mirtazapine, demethylmirtazapine and 8-hydroxy mirtazapine in human urine after solid-phase microextraction

A selective and reproducible off-line solid-phase microextraction procedure was developed for the simultaneous enantioselective determination of mirtazapine (MRT), demethylmirtazapine and 8-hydroxymirtazapine in human urine. CE was used for optimization of the extraction procedure whereas LC-MS was used for method validation and application. The influence of important factors in the solid-phase microextraction efficiency is discussed, such as the fiber coatings, extraction time, pH, ionic strength, temperature and desorption time. Before extraction, human urine samples were submitted to enzymatic hydrolysis at 37 degrees C for 16 h. Then, the enzyme was precipitated with trichloroacetic acid and the pH was adjusted to 8 with 1 mol/L pH 11 phosphate buffer solution. In the extraction, the analytes were transferred from the aqueous solution to the polydimethylsiloxane-divinylbenzene fiber coating and then desorbed in methanol. The mean recoveries were 5.4, 1.7 and 1.0% for MRT, demethylmirtazapine and 8-hydroxymirtazapine enantiomers, respectively. The method was linear over the concentration range of 62-1250 ng/mL. The within-day and between-day assay precision and accuracy were lower than 15%. The method was successfully employed in a preliminary cumulative urinary excretion study after administration of racemic MRT to a healthy volunteer.