Separation of peptides by HPLC using a surface-confined ionic liquid stationary phase

Determination of Aminoglycosides by Ion-Pair Liquid Chromatography with UV Detection: Application to Pharmaceutical Formulations and Human Serum Samples

Aminoglycosides (AGs) represent a prominent class of antibiotics widely employed for the treatment of various bacterial infections. Their widespread use has led to the emergence of antibiotic-resistant strains of bacteria, highlighting the need for analytical methods that allow the simple and reliable determination of these drugs in pharmaceutical formulations and biological samples. In this study, a simple, robust and easy-to-use analytical method for the simultaneous determination of five common aminoglycosides was developed with the aim to be widely applicable in routine laboratories. With this purpose, different approaches based on liquid chromatography with direct UV spectrophotometric detection methods were investigated: on the one hand, the use of stationary phases based on hydrophilic interactions (HILIC); on the other hand, the use of reversed-phases in the presence of an ion-pairing reagent (IP-LC). The results obtained by HILIC did not allow for an effective separation of aminoglycosides suitable for subsequent spectrophotometric UV detection. However, the use of IP-LC with a C18 stationary phase and a mobile phase based on tetraborate buffer at pH 9.0 in the presence of octanesulfonate, as an ion-pair reagent, provided adequate separation for all five aminoglycosides while facilitating the use of UV spectrophotometric detection. The method thus developed, IP-LC-UV, was optimized and applied to the quality control of pharmaceutical formulations with two or more aminoglycosides. Furthermore, it is demonstrated here that this methodology is also suitable for more complex matrices, such as serum, which expands its field of application to therapeutic drug monitoring, which is crucial for aminoglycosides, with a therapeutic index ca. 50%.

Recent development of ionic liquid stationary phases for liquid chromatography

Based on their particular physicochemical characteristics, ionic liquids have been widely applied in many fields of analytical chemistry. Many types of ionic liquids were immobilized on a support like silica or monolith as stationary phases for liquid chromatography. Moreover, different approaches were developed to bond covalently ionic liquids onto the supporting materials. The obtained ionic liquid stationary phases show multi-mode mechanism including hydrophobic, hydrophilic, hydrogen bond, anion exchange, π-π, and dipole-dipole interactions. Therefore, they could be used in different chromatographic modes including ion-exchange, RPLC, NPLC and HILIC to separate various classes of compounds. This review mainly summarizes the immobilized patterns and types of ionic liquid stationary phases, their retention mechanisms and applications in the recent five years.

Ionic liquids as buffer additives in ionic liquid-polyacrylamide gel electrophoresis separation of mixtures of low and high molecular weight proteins

Three novel ionic liquids (ILs) [C_nPBr] (n= 4, 6, 8) have been synthesized and were used as buffer additives in IL-PAGE separation of mixture of acidic proteins.

Facile preparation of organic-inorganic hybrid polymeric ionic liquid monolithic column with a one-pot process for protein separation in capillary electrochromatography

An organic-inorganic hybrid monolithic column based on 1-vinyl-3-dodecylimidazolium bromide (VC12Im(+)Br(-)) has been prepared in a single step by combining radical copolymerization with a non-hydrolytic sol-gel (NHSG) process. The NHSG process was significantly shortened to 6 h by using formic acid as catalyst. For comparison, we also prepared polymeric ionic liquid (PIL) monolithic columns by hydrolytic sol-gel and organic polymeric process, respectively. The resulting monolithic columns were characterized by Fourier transform infrared spectra, scanning electron microscopy, and Brunauer-Emmett-Teller. Under the capillary electrochromatography mode, these columns were applied to separate alkylbenzenes, anilines, and proteins, respectively. The results indicated that the NHSG-based hybrid PIL monolithic column exhibited the highest column efficiency among the three types of columns; organic solvent, commonly required by the traditional columns to achieve satisfactory separation efficiency for proteins, was absent in the NHSG-based hybrid PIL monolithic column because of the biocompatibility of the VC12Im(+)Br(-), which was beneficial to analysis of protein containing samples. In order to demonstrate its application potential, the developed NHSG-based hybrid PIL monolithic column was also employed to separate egg white sample.

Application of ionic liquids in liquid chromatography and electrodriven separation

Ionic liquids (ILs) are salts in the liquid state at ambient temperature, which are nonvolatile, nonflammable with high thermal stability and dissolve easily for a wide range of inorganic and organic materials. As a kind of potential green solvent, they show high efficiency and selectivity in the field of separation research, especially in instrumental analysis. Thus far, ILs have been successfully applied by many related researchers in high-performance liquid chromatography and capillary electrophoresis as chromatographic stationary phases, mobile phase additives or electroosmotic flow modifiers. This paper provides a detailed review of these applications in the study of natural products, foods, drugs and other fine chemicals. Furthermore, the prospects of ILs in liquid chromatographic and electrodriven techniques are discussed.

Comparison and evaluation of five types of imidazole-modified silica adsorbents for the removal of 2,4-dinitrophenol from water samples with the methyl group at different positions of imidazolium ring

The objective of this work was to improve the understanding the influence of the methyl group at different positions of imidazolium ring on the adsorption behaviors of imidazole-modified silica adsorbents. Five adsorbents named as SilprImCl, SilprM₁ImCl, SilprM₂ImCl, SilprM₄ImCl and SilprM₁M₂ImCl were synthesized using imidazole, 1-methylimidazole, 2-methylimidazole, 4-methylimidazole and 1,2-dimethylimidazole, respectively. These adsorbents were characterized by scanning electron microscope, infrared spectra, thermogravimetric analysis, elemental analysis and BET analysis. Firstly, phenol, 2-nitrophenol (2-NP), 3-nitrophenol (3-NP), 4-nitrophenol (4-NP) and 2,4-dinitrophenol (2,4-DNP) were used as adsorbates to investigate the selectivity of SilprImCl and its adsorption capacities followed the order of 2,4-DNP≫4-NP>2-NP≫3-NP>phenol. Therefore, 2,4-DNP was used to investigate the adsorption behaviors of the five adsorbents. It was inferred that the adsorbents are of primary anion-exchange and electrostatic nature. The electrostatic nature was affected significantly by the methyl group at different positions of imidazolium ring. The adsorbed amounts of 2,4-DNP decreased in the order of: SilprM₁M₂ImCl≈SilprM₁ImCl>SilprM4ImCl>SilprM₂ImCl>SilprImCl. The adsorption-elution experiments indicated that 2,4-DNP can be removed from aqueous solutions by a SilprM₄ImCl packed column and the recovery of 91.6% was obtained. The adsorbent could be regenerated and reused ten times at least by simple washings with HCl and water in turn.

Selective isolation of hemoglobin by use of imidazolium-modified polystyrene as extractant

Ionic liquids have attracted much attention in the analysis of a variety of species. The functional groups in ionic liquids can result in highly efficient separation and enrichment and, because of their typical lack of volatility, they are environmentally benign. We grafted imidazole cations onto the surface of chloromethyl polystyrene, denoted PS-CH2-[MIM](+)Cl(-), and this modified polymer was used to selectively extract the protein hemoglobin (Hb). The prepared extractant PS-CH2-[MIM](+)Cl(-), containing 2 mmol immobilized imidazole groups per gram polymer, was characterized by FT-IR, surface charge analysis, and elemental analysis. The adsorption efficiency was 91%. The adsorption capacity of the PS-CH2-[MIM](+)Cl(-) for Hb was 23.6 μg mg(-1), and 80% of the retained Hb could be readily recovered by use of 0.5% (m/v) aqueous sodium dodecyl sulfate (SDS) solution as eluate. The activity of the eluted Hb was approximately 90%. The prepared imidazole-containing solid phase polymer was used for direct adsorption of Hb without use of any other solid matrix as support of the ionic liquid. The material was used in practice to isolate Hb from human whole blood.

Ionic liquid applications in peptide chemistry: synthesis, purification and analytical characterization processes

This review aims to provide a comprehensive overview of the recent advances made in the field of ionic liquids in peptide chemistry and peptide analytics.

Ionic liquid-modified materials for solid-phase extraction and separation: a review

In recent years, materials science has propelled to the research forefront. Ionic liquids with unique and fascinating properties have also left their footprints to the developments of materials science during the last years. In this review we highlight some of their recent advances and provide an overview at the current status of ionic liquid-modified materials applied in solid-phase extraction, liquid and gas chromatography and capillary electrochromatography with reference to recent applications. In addition, the potential of ionic liquids in the modification of capillary inner wall in capillary electrophoresis is demonstrated. The main target material modified with ionic liquids is silica, but polymers and monoliths have recently joined the studies. Although imidazolium is still clearly the most commonly used ionic liquid for the covalently modification of materials, the exploitation of pyridinium and phosphonium will most probably increase in the future.

Application of a modified linear solvation energy relationship (LSER) model to retention on a butylimidazolium-based column for high performance liquid chromatography

Previously, a new HPLC stationary phase based on n-butylimidazolium bromide was investigated using a linear solvation energy relationship (LSER) to systematically evaluate the intermolecular interactions between 32 test solutes and the stationary phase. The results and further comparisons with conventional reversed phase systems revealed that retention properties are similar to phenyl phases in both methanol/water and acetonitrile/water mixtures. In this work, the LSER model is extended by including the degree of ionization molecular descriptor, D, which takes into account the pK(a) of ionizable analytes and the pH of the mobile phase. The D molecular descriptor has been further divided into D(+) and D(-) components that separately account for the ionization of basic and acidic solutes, respectively. This is the first study where the ionization terms for weakly acidic solutes and weakly basic solutes have been separated. LSER results obtained with the expanded solute set with and without the inclusion of the D(+) and D(-) solute descriptors were compared. The improved correlation and standard error obtained for the expanded test set in the presence and absence of the D(+) and D(-) descriptors (R(2): 0.987 vs 0.846; SE: 0.051 vs 0.163 for 60% MeOH) support inclusion of these additional terms. Further, the coefficients obtained from the multiple linear regression for the expanded test set with the D(+) and D(-) descriptors were more consistent with the coefficients obtained when the test set included just neutral analytes. In addition, the expanded LSER model did a better job of predicting elution order for the ionizable analytes. This work provides further supporting evidence for the multimodal nature of the butylimidazolium stationary phase.

Recent applications of ionic liquids in separation technology

Ionic liquids (ILs) have been applied in different areas of separation, such as ionic liquid supported membranes, as mobile phase additives and surface-bonded stationary phases in chromatography separations and as the extraction solvent in sample preparations, because they can be composed from various cations and anions that change the properties and phase behavior of liquids. Although the applications of ILs in separations are still in their early stages, the academic interest in ILs is increasing. An overview of the principle applications of ILs in separation technology is present in this work. Furthermore, the prospects of the ILs in separation techniques are discussed.