Selective enrichment of phosphatidylcholines from food and biological matrices using metal oxides as solid-phase extraction materials prior to analysis by HPLC–ESI-MS/MS

Synthesis of hierarchical porous zirconium dioxide and its application in the detection of sulfonamides in animal-derived food

In order to effectively remove grease for the detection of sulfonamides, a non-toxic and low-cost hierarchical porous zirconia material was synthesized using the dual template method. The lipid impurities in an animal-derived food matrix can be absorbed by hierarchical zirconia. A ZrO₂ prepolymer was synthesized by mixing amphiphilic triblock copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123) with tannin extract as the double template and Zr(SO₄)₂ as the metal source. After aging, drying and calcination at high temperature, the prepolymer transforms into a hierarchical porous structure. The synthesized materials were characterized using SEM, XRD, FT-IR, and BET. The results show that the material has an abundant pore structure and hierarchical pore structure. The adsorption conditions were optimized. The hierarchical porous ZrO₂ synthesized by this method is relatively uniform, and is characterized by large specific surface area as well as high lipid impurity adsorption capacity. Through the optimization experiment of adsorption conditions, we found that hierarchical porous ZrO₂ can reach the maximum adsorption capacity in 60 min under weak acidic conditions. The samples are used for actual sample testing such as HPLC of sulfadiazine (SD), sulfamethazine (SM2), sulfamethoxydiazine (SMD), sulfamethoxazole (SIZ) and sulfadimethoxine (SDM), and the recovery experiment of sulfonamides in chicken was carried out. The recoveries were 80.9-97.6% and the detection limit was 3.8-17.6 μg L^-1. This work provides a new strategy for oil removal using hierarchical porous materials.

Simple separation of glycosphingolipids in the lower phase of a Folch's partition from crude lipid fractions using zirconium dioxide

A simple method was developed for the separation of glycosphingolipids (GSLs) from lipid mixtures, including phospholipids and cholesterol, using zirconium dioxide (zirconia, ZrO₂). Although this procedure does not incorporate a mild alkali treatment, which is commonly used for eliminating glycerophospholipids, it can be used to remove both alkali-resistant sphingomyelin and glycerophospholipids possessing ether bonds. Importantly, when GSLs were dissolved in organic solvent together with cholesterol (Chol) and phospholipids, and loaded onto ZrO₂, Chol did not bind to the ZrO₂ but both the GSLs and phospholipids did. When eluted with 5 mg/mL of 2,5-dihydroxybenzoic acid in methanol, GSLs but not phospholipids were recovered, leaving the phospholipids bound to the ZrO₂ particles. This method is particularly applicable for GSLs such as triglycosylceramides, tetraglycosylceramides and some pentaglycosylceramides, sulfatide and GM3 located in the lower phase of a Folch's partition, where significant amounts of phospholipids, Chol and neutral lipids reside along with GSLs. This method was successfully used to easily isolate GSLs from biological materials for their subsequent analysis by matrix-assisted laser desorption ionization time-of-flight mass spectrometry with high resolution.

High-sensitivity detection of therapeutic drugs in complex biofluids using a packed ballpoint-electrospray ionization technique

A simple and sensitive C₁₈ packed ballpoint-electrospray ionization (PBP-ESI) technique was developed for biofluid analysis. In this technique, the configuration of a commercial ballpoint consisting of a hollow chamber, an intermediate socket, and a metal ball was fully exploited. The rear-end hollow chamber was used for loading C₁₈ adsorbent and sample, and the front metal ball served as a spray emitter for online ionization. The good electrical conductivity of the metal body allowed high voltage to be conveniently applied to the ballpoint without inserting the electrode into the solution for electrical connection. Urine sample was directly analyzed with the C₁₈ packed ballpoint; plasma and whole blood samples were premixed with C₁₈ adsorbent before being packed into the ballpoint for detection. As a result of the sample cleanup by C₁₈ adsorbent, the salt matrix in the urine sample as well as the phospholipid and protein matrices in plasma and whole blood samples was significantly reduced. The lower limits of quantitation (LLOQs) for urine, plasma, and whole blood samples reached the subnanogram-per-milliliter level. Graphical abstract.

Selective detection of phospholipids in human blood plasma and single cells for cancer differentiation using dispersed solid-phase microextraction combined with extractive electrospray ionization mass spectrometry

Rapid and selective determination of phospholipids in microvolume biofluid samples for cancer differentiation was achieved by d-SPME–iEESI-MS.

Sensitive quantitative analysis of phosphorylated primary metabolites using selective metal oxide enrichment and GC- and IC- MS/MS

In this study, we present a novel selective cleanup/enrichment method based on metal oxide solid phase extraction combined with quantitative gas chromatography-tandem mass spectrometry and ion exchange chromatography-tandem mass spectrometry for the analysis of phosphorylated metabolites in yeast cell extracts relevant to biotechnological processes. Following screening of several commercially available metal oxide-based enrichment materials, all steps of the enrichment process (loading, washing and elution) were optimized for both the selective enrichment of 12 phosphorylated compounds from the glycolysis and pentose phosphate pathways, and the simultaneous removal of highly abundant matrix components such as organic acids and sugars. The full analytical workflow was then validated to meet the demands of accurate quantification of phosphorylated metabolites in yeast (Pichia pastoris) cell extracts using the best performing material and cleanup/enrichment method combined with quantification strategies based on internal standardization with isotopically labeled internal standards and external calibration. A good recovery (>70%) for 5 of the 12 targeted phosphorylated compounds with RSDs of less than 6.0% was obtained while many sugars, organic acids and amino acids were removed (>99% of glucose, and >95% of aspartate, succinate, glutamate, alanine, glycine, serine, threonine, proline, and valine). The use of isotopically labeled internal standards added to the samples prior to SPE, enables accurate quantification of the metabolites as it compensates for errors introduced during sample pretreatment and GC-MS or LC-MS analysis. To the best of our knowledge, this is the first time an effective and selective metal oxide-based affinity chromatography cleanup/enrichment method was designed and applied successfully for intracellular phosphorylated metabolites.

Novel approach to enhance sensitivity in surface-assisted laser desorption/ionization mass spectrometry imaging using deposited organic-inorganic hybrid matrices

Sample pretreatment is key to obtaining good data in matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI). Although sublimation is one of the best methods for obtaining homogenously fine organic matrix crystals, its sensitivity can be low due to the lack of a solvent extraction effect. We investigated the effect of incorporating a thin film of metal formed by zirconium (Zr) sputtering into the sublimation process for MALDI matrix deposition for improving the detection sensitivity in mouse liver tissue sections treated with olanzapine. The matrix-enhanced surface-assisted laser desorption/ionization (ME-SALDI) method, where a matrix was formed by sputtering Zr to form a thin nanoparticle layer before depositing MALDI organic matrix comprising α-cyano-4-hydroxycinnamic acid (CHCA) by sublimation, resulted in a significant improvement in sensitivity, with the ion intensity of olanzapine being about 1800 times that observed using the MALDI method, comprising CHCA sublimation alone. When Zr sputtering was performed after CHCA deposition, however, no such enhancement in sensitivity was observed. The enhanced sensitivity due to Zr sputtering was also observed when the CHCA solution was applied by spraying, being about twice as high as that observed by CHCA spraying alone. In addition, the detection sensitivity of these various pretreatment methods was similar for endogenous glutathione. Given that sample preparation using the ME-SALDI-MSI method, which combines Zr sputtering with the sublimation method for depositing an organic matrix, does not involve a solvent, delocalization problems such as migration of analytes observed after matrix spraying and washing with aqueous solutions as sample pretreatment are not expected. Therefore, ME-Zr-SALDI-MSI is a novel sample pretreatment method that can improve the sensitivity of analytes while maintaining high spatial resolution in MALDI-MSI.

Separation of glycosphingolipids with titanium dioxide

We introduce the principle of a new technique to isolate glycosphingolipids (GSLs) from phospholipids. Neutral and acidic GSLs in organic solvent bind to titanium dioxide under neutral pH and can be eluted with 5 mg/ml of 2,5-dihydroxybenzoic acid in methanol. This special property is applicable for eliminating phospholipids, including sphingomyelin, which cannot be eliminated by a typical mild alkaline treatment. By using this technique, we demonstrated the rapid separation of minor components of GSLs, namely sulfatide and gangliosides from rabbit serum and liver, respectively. The minor GSL components were effectively purified despite both sources containing tremendous amount of phospholipids and simple lipids such as cholesterol, cholesteryl esters and triglycerides.

Automated Removal of Phospholipids from Membrane Proteins for H/D Exchange Mass Spectrometry Workflows

Membrane proteins are currently the most common targets for pharmaceuticals. However, characterization of their structural dynamics by hydrogen/deuterium exchange mass spectrometry (HDX-MS) is sparse due to insufficient automated methods to handle full-length membrane proteins in lipid bilayers. Additionally, membrane lipids used to mimic the membrane environment and to solubilize membrane proteins can impair chromatography performance and cause ion suppression in the mass spectrometer. The workflow discussed herein advances HDX-MS capabilities and other MS applications for membrane proteins by providing a fully automated method for HDX-MS analysis based on a phospholipid removal scheme compatible with robotic handling. Phospholipids were depleted from protein samples by the addition of zirconium oxide beads, which were subsequently removed by inline filtration using syringeless nanofilters. To demonstrate this method, single-pass transmembrane protein FcγRIIa (CD32a) expressed into liposomes was used. Successful depletion of phospholipids ensured optimal liquid-chromatography-mass-spectrometry performance, and measurement of peptides from the transmembrane domain of FcγRIIa indicated phospholipids associated with this region were either not present or did not shield the transmembrane domain from digestion by pepsin. Furthermore, amino acid sequence coverage provided by this method was suitable to enable future measurement of structural dynamics of ectodomain, transmembrane domain, and endodomain of FcγRIIa. Moreover, this method is the first to enable fully automated HDX-MS on full-length transmembrane proteins in lipid bilayers, a notable advancement to facilitate understanding of membrane proteins, development of pharmaceuticals, and characterization for regulatory agencies.

Bioanalysis of farnesyl pyrophosphate in human plasma by high-performance liquid chromatography coupled to triple quadrupole tandem mass spectrometry and hybrid quadrupole Orbitrap high-resolution mass spectrometry

The isoprenoids farnesyl pyrophosphate (FPP) and geranylgeranyl pyrophosphate (GGPP) are pivotal intermediates for cholesterol homeostasis and cell signaling in the mevalonate pathway. We developed a sensitive and selective high-performance liquid chromatography tandem triple quadrupole mass spectrometry (LC-QQQ-MS) method for FPP in human plasma without the need for a derivatization process. We optimized the sample preparation procedure to extract FPP and ¹³C₅-FPP (as internal standard) from sample fluids using methanol. Phosphate-buffered saline was used as the surrogate matrix for the preparation of calibration curves and quality control samples. Using an XBridge C18 column (3.5 μm, 2.1 × 100-mm ID) with gradient elution composed of 10 mmol/L ammonium carbonate/ammonium hydroxide (1000:5, v/v) and acetonitrile/ammonium hydroxide (1000:5, v/v) provided the sharp peaks of FPP and ¹³C₅-FPP in human plasma. The calibration curve ranged from 0.2 to 20 ng/mL in human plasma with acceptable intra-day and inter-day precision and accuracy. The sensitivity of this bioanalytical method was sufficient for clinical analysis. The endogenous FPP plasma concentrations in 40 human healthy volunteers ascertained by LC-QQQ-MS and high-performance liquid chromatography tandem hybrid quadrupole Orbitrap high-resolution mass spectrometry (LC-Q-Orbi-MS) were comparable. Furthermore, the endogenous GGPP in human plasma was selectively detected for the first time by LC-Q-Orbi-MS. In conclusion, a sensitive bioanalytical method for FPP in human plasma by means of LC-QQQ-MS and LC-Q-Orbi-MS was developed in this study. Taking into account the versatility of LC-Q-Orbi-MS, the simultaneous detection of FPP and GGPP may be feasible in clinical practice.

Bioactive lipids in the butter production chain from Parmigiano Reggiano cheese area

BACKGROUND

Bovine milk contains hundreds of diverse components, including proteins, peptides, amino acids, lipids, lactose, vitamins and minerals. Specifically, the lipid composition is influenced by different variables such as breed, feed and technological process. In this study the fatty acid and phospholipid compositions of different samples of butter and its by-products from the Parmigiano Reggiano cheese area, produced by industrial and traditional churning processes, were determined.

RESULTS

The fatty acid composition of samples manufactured by the traditional method showed higher levels of monounsaturated and polyunsaturated fatty acids compared with industrial samples. In particular, the contents of n-3 fatty acids and conjugated linoleic acids were higher in samples produced by the traditional method than in samples produced industrially. Sample phospholipid composition also varied between the two technological processes. Phosphatidylethanolamine was the major phospholipid in cream, butter and buttermilk samples obtained by the industrial process as well as in cream and buttermilk samples from the traditional process, while phosphatidylcholine was the major phospholipid in traditionally produced butter. This result may be explained by the different churning processes causing different types of membrane disruption. Generally, samples produced traditionally had higher contents of total phospholipids; in particular, butter produced by the traditional method had a total phospholipid content 33% higher than that of industrially produced butter.

CONCLUSION

The samples studied represent the two types of products present in the Parmigiano Reggiano cheese area, where the industrial churning process is widespread compared with the traditional processing of Reggiana cow's milk. This is because Reggiana cow's milk production is lower than that of other breeds and the traditional churning process is time-consuming and economically disadvantageous. However, its products have been demonstrated to contain more bioactive lipids compared with products obtained from other breeds and by the industrial process.

Nanoparticle-based microextraction techniques in bioanalysis

Nanoparticles (NPs) have attracted a great deal of attention in the last decade due to their exceptional mechanical, optical and electronic properties. This article deals with the use of NPs as probes for the extraction of biomolecules from biological samples. In this context, NPs present some advantages compared with conventional sorbents. Their high surface-to-volume ratio, easy synthetic (especially for inorganic NPs) and derivatization procedures, and their biocompatibility make them a powerful alternative. In order to provide a systematic approach to the topic, NPs have been divided into two general groups attending to their chemical nature. Carbon-based (e.g., fullerene and nanotubes) and inorganic NPs (e.g., gold and magnetic NPs) are considered in depth, explaining their main properties and applications. After these critical considerations, the most important conclusions and essential trends in this field are also outlined.

Triacylglycerol profiling of microalgae strains for biofuel feedstock by liquid chromatography-high-resolution mass spectrometry

Biofuels from photosynthetic microalgae are quickly gaining interest as a viable carbon-neutral energy source. Typically, characterization of algal feedstock involves breaking down triacylglycerols (TAG) and other intact lipids, followed by derivatization of the fatty acids to fatty acid methyl esters prior to analysis by gas chromatography (GC). However, knowledge of the intact lipid profile could offer significant advantages for discovery stage biofuel research such as the selection of an algal strain or the optimization of growth and extraction conditions. Herein, lipid extracts from microalgae were directly analyzed by ultra-high pressure liquid chromatography–mass spectrometry (UHPLC-MS) using a benchtop Orbitrap mass spectrometer. Phospholipids, glycolipids, and TAGs were analyzed in the same chromatographic run, using a combination of accurate mass and diagnostic fragment ions for identification. Using this approach, greater than 100 unique TAGs were identified over the six algal strains studied and TAG profiles were obtained to assess their potential for biofuel applications. Under the growth conditions employed, Botryococcus braunii and Scenedesmus obliquus yielded the most comprehensive TAG profile with a high abundance of TAGs containing oleic acid.

Figure

Tools for analyzing the phosphoproteome and other phosphorylated biomolecules: a review

Enrichment, separation and mass spectrometric analysis of biomolecules carrying a phosphate group plays an important role in current analytical chemistry. Application areas range from the preparative enrichment of phospholipids for biotechnological purposes and the separation and purification of plasmid DNA or mRNA to the specific preconcentration of phosphoproteins and -peptides to facilitate their later identification and characterization by mass spectrometry. Most of the recent improvements in this field were triggered by the need for phosphopeptide enrichment technology for the analysis of cellular protein phosphorylation events with the help of liquid chromatography-mass spectrometry. The high sensitivity of mass spectrometry and the possibility to combine this technique with different separation modes in liquid chromatography have made it the method of choice for proteome analysis. However, in the case of phosphoprotein analysis, the low abundance of the resulting phosphopeptides and their low quality fragment spectra interfere with the identification of phosphorylation events. Recent developments in phosphopeptide enrichment and fragmentation technologies successfully helped to overcome these limitations. In this review, we will focus on sample preparation techniques in the field of phosphoproteomics, but also highlight recent advancements for the analysis of other phosphorylated biomolecules.