Development of an amperometric sulfite biosensor based on a gold nanoparticles/chitosan/multiwalled carbon nanotubes/polyaniline-modified gold electrode

Structural and morphological tuning of Cu-based metal oxide nanoparticles by a facile chemical method and highly electrochemical sensing of sulphite

A facile one-step chemical method is introduced for the successful synthesis of Cu₂O, CuO and CuNa₂(OH)₄ crystal structures and their electrochemical properties were also investigated. X-ray diffraction studies revealed that these copper-based oxide nanoparticles display different crystal structures such as cubic (Cu₂O), monoclinic (CuO) and orthorhombic [CuNa₂(OH)₄]. The microstructural information of nanoparticles was investigated by transmission electron microscopy. It shows attractive morphologies of different orientation such as rod like structure, nanobeads and well-aligned uniform nanorod for Cu₂O, CuO and CuNa₂(OH)₄, respectively. Electrochemical sensing of sulphite (SO₃²⁻) on these three copper-based oxide modified electrodes was investigated. Among the three different crystal structures, CuO shows promising electrocatalytic activity towards oxidation of sulphite. A linear variation in peak current was obtained for SO₃²⁻ oxidation from 0.2 to 15 mM under the optimum experimental condition. The sensitivity and detection limit were in the order of 48.5 µA cm⁻² mM⁻¹ and 1.8 µM, respectively. Finally, practical utility of CuO modified electrode was demonstrated for the estimation of sulphite in commercial wine samples.

Determination of sulfite in food and beverages using a reliable ratiometric AIE probe

The feasibility of using an “AIE + ICT” probe for a highly accurate and reliable determination of the sulfite level in food and beverages is demonstrated.

Dual-Layered Nanomaterial-Based Molecular Pattering on Polymer Surface Biomimetic Impedimetric Sensing of a Bliss Molecule, Anandamide Neurotransmitter

In this endeavor, a novel electrochemical biosensor was designed using multiwall carbon nanotubes (MWCNTs)- and nickel nanoparticles (NiNPs)-embedded anandamide (AEA) imprinted polymer. The NiNPs so synthesized were mortared with MWCNTs and molecularly imprinted polymer (MIP), which enhanced sensitivity and selectivity of the developed sensor, respectively. The characterization methods of AEA-based MIP included X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET) analysis, which supported the successful synthesis of the polymer. Electrochemical studies of fabricated sensor were performed using cyclic voltammetry (CV) and electrochemical impedance spectroscopy in potentiostatic mode (PEIS). In this first phase of AEA-specific sensor development, MWCNT/NiNP/MIP@SPE was found to successfully discriminate between different concentrations of AEA. The developed sensing platform demonstrated a 100 pM-1 nM linear range with a 0.01 nM detection limit (LOD), 0.0149 mA/pM sensitivity, and 50% stability within 4 months. The sensor demonstrated selectivity toward AEA: although acetylcholine (ACh) and dopamine acted as strong interfering components because of their chemical similarity, the spiked AEA samples demonstrated ∼90% recoveries. Hence, our results have passed the first step in AEA detection at home, although with a clinical setup, future advancement is still required.

Electrochemical sensors and biosensors based on the use of polyaniline and its nanocomposites: a review on recent advances

Polyaniline and its composites with nanoparticles have been widely used in electrochemical sensor and biosensors due to their attractive properties and the option of tuning them by proper choice of materials. The review (with 191 references) describes the progress made in the recent years in polyaniline-based biosensors and their applications in clinical sensing, food quality control, and environmental monitoring. A first section summarizes the features of using polyaniline in biosensing systems. A subsequent section covers sensors for clinical applications (with subsections on the detection of cancer cells and bacteria, and sensing of glucose, uric acid, and cholesterol). Further sections discuss sensors for use in the food industry (such as for sulfite, phenolic compounds, acrylamide), and in environmental monitoring (mainly pesticides and heavy metal ions). A concluding section summarizes the current state, highlights some of the challenges currently compromising performance in biosensors and nanobiosensors, and discusses potential future directions. Graphical abstract Schematic presentation of electrochemical sensor and biosensors applications based on polyaniline/nanoparticles in various fields of human life including medicine, food industry, and environmental monitoring. The simultaneous use of suitable properties polyaniline and nanoparticles can provide the fabrication of sensing systems with high sensitivity, short response time, high signal/noise ratio, low detection limit, and wide linear range by improving conductivity and the large surface area for biomolecules immobilization.

Highly sensitive and selective sulfite sensors based on solution-gated graphene transistors with multi-walled carbon nanotube functionalized gate electrodes

Due to the potential toxicity of sulfite as widely used food additive, there is urgent need for the development of low-cost, rapid and convenient sensors for sulfite detection. Toward this end, highly sensitive and selective sulfite sensors based on solution gated graphene transistors (SGGTs) was innovatively developed. The performance of the device was significantly improved through the functionalization of the gate electrode with multi-walled carbon nanotubes (MWCNTs). We found that the MWCNT modified SGGT sensor showed an ultra-low detection limit of 30 nM toward sulfite. In addition, we also demonstrated that the SGGT-based sulfite sensor was capable of detecting sulfite content in practical liquor samples with high recovery rate. Considering its low-cost and easy-fabricating features, we believe that the SGGT-based sensor with appropriate functionalization may be applied as a highly potential platform for ultra-sensitive detection of a broad range of important analytes in practical samples for food safety purpose.

Silver nanoparticles impregnated chitosan layered carbon nanotube as sensor interface for electrochemical detection of clopidogrel in-vitro

Continuous periodical monitoring of clopidogrel in physiological body fluids is indispensable in medical diagnosis of heart ailments and cardiovascular diseases. A highly sensitive electrochemical sensor has been fabricated with silver nanoparticles embedded chitosan-carbon nanotube hybrid composite (AgChit-CNT) as sensor interface for detection of the important anti-platelet drug, clopidogrel (CLP). Synthesized AgChit-CNT nanocomposite is examined by x-ray diffraction, Raman spectroscopy and field emission scanning electron microscopy for its chemical and structural characteristics. Crystalline silver nanoparticles of about 35 nm are well distributed in the composite and have formed continuous chain like linkages with CNTs all throughout. Electrochemical responses of the fabricated AgChit-CNT nanocomposite electrode for the determination of CLP have been examined by cyclic voltammetry and electrochemical impedance spectroscopy. The nanoAg patterned CNT nanocomposite interface acts as an excellent electron transfer mediator towards the oxidation of clopidogrel. Electrochemical determination of CLP was investigated by differential pulse voltammetry (DPV) and amperometric analysis under optimized conditions. The limit of detection by DPV and amperometry were 30 nM and 10 nM, respectively, and the time of the analysis is as low as 10 s. Practical applicability for determination in artificially prepared urine and pharmaceutical formulation has been examined with good recovery limits of 95.2 to 102.6%.

An efficient nanomaterial-based electrochemical biosensor for sensitive recognition of drug-resistant leukemia cells

A novel electrochemical cytosensor was developed for the fast and high-sensitivity recognition of drug-resistant leukemia K562/ADM cells based on the P-glycoprotein (P-gp) expression level on a cell membrane. The nanocomposite interface of the gold nanoparticles/polyaniline nanofibers (AuNPs/PANI-NF) was chosen to design the biosensor for electrochemical detection. Au/PANI-NF-based cytosensors coated with anti-P-glycoprotein (anti-P-gp) molecules could provide a biomimetic interface for the immunosensing of cell surface P-glycoprotein, and thus could capture the over-expression P-gp cells. Transmission electron microscopy (TEM) indicated that the gold nanoparticles were uniformly anchored along the structure of the PANI-NF surface, displaying fibrillar morphology with a diameter of ∼70 nm, and atomic force microscopy (AFM) further presented the morphology of the nanocomposite film. Owing to the high affinity of anti-P-gp for leukemia K562/ADM cells of the propounded sensing platform, the proposed biosensor exhibited excellent analytical performance for leukemia K562/ADM cells, ranging from 1.6 × 10(2) to 1.6 × 10(6) cells per mL with a detection limit of 80 cells per mL. Recovery experiments indicated that the sensitivity reported here is suitable for practical application. The cell surface P-gp expression level was analysed by flow cytometric experiments, which confirmed the above recognized result. This strategy is also a cost-effective and convenient operation, implying great promise for the sensitive recognition of cancer cells and cell surface receptors; thus, it is helpful in cancer diagnosis.

Determination of sulfite with emphasis on biosensing methods: a review

Sulfite is used as a preservative in a variety of food and pharmaceutical industries to inhibit enzymatic and nonenzymatic browning and in brewing industries as an antibacterial and antioxidizing agent. Convenient and reproducible analytical methods employing sulfite oxidase are an attractive alternative to conventional detection methods. Sulfite biosensors are based on measurement of either O2 or electrons generated from splitting of H2O2 or heat released during oxidation of sulfite by immobilized sulfite oxidase. Sulfite biosensors can be grouped into 12 classes. They work optimally within 2 to 900 s, between pH 6.5 and 9.0, 25 and 40 °C, and in the range from 0 to 50,000 μM, with detection limit between 0.2 and 200 μM. Sulfite biosensors measure sulfite in food, beverages, and water and can be reused 100-300 times over a period of 1-240 days. The review presents the principles, merits, and demerits of various analytical methods for determination of sulfite, with special emphasis on sulfite biosensors.