From single to multiple microcoil flow probe NMR and related capillary techniques: a review

Multinuclear 1D and 2D NMR with 19F-Photo-CIDNP hyperpolarization in a microfluidic chip with untuned microcoil

Nuclear Magnetic Resonance (NMR) spectroscopy is a most powerful molecular characterization and quantification technique, yet two major persistent factors limit its more wide-spread applications: poor sensitivity, and intricate complex and expensive hardware required for sophisticated experiments. Here we show NMR with a single planar-spiral microcoil in an untuned circuit with hyperpolarization option and capability to execute complex experiments addressing simultaneously up to three different nuclides. A microfluidic NMR-chip in which the 25 nL detection volume can be efficiently illuminated with laser-diode light enhances the sensitivity by orders of magnitude via photochemically induced dynamic nuclear polarization (photo-CIDNP), allowing rapid detection of samples in the lower picomole range (normalized limit of detection at 600 MHz, nLOD_f,600, of 0.01 nmol Hz^1/2). The chip is equipped with a single planar microcoil operating in an untuned circuit that allows different Larmor frequencies to be addressed simultaneously, permitting advanced hetero-, di- and trinuclear, 1D and 2D NMR experiments. Here we show NMR chips with photo-CIDNP and broadband capabilities addressing two of the major limiting factors of NMR, by enhancing sensitivity as well as reducing cost and hardware complexity; the performance is compared to state-of-the-art instruments.

NMR-Based Chromatography Readouts: Indispensable Tools to “Translate” Analytical Features into Molecular Structures

Gaining structural information is a must to allow the unequivocal structural characterization of analytes from natural sources. In liquid state, NMR spectroscopy is almost the only possible alternative to HPLC-MS and hyphenating the effluent of an analyte separation device to the probe head of an NMR spectrometer has therefore been pursued for more than three decades. The purpose of this review article was to demonstrate that, while it is possible to use mass spectrometry and similar methods to differentiate, group, and often assign the differentiating variables to entities that can be recognized as single molecules, the structural characterization of these putative biomarkers usually requires the use of NMR spectroscopy.

Natural products dereplication by diffusion ordered NMR spectroscopy (DOSY)

Diffusion-ordered NMR spectroscopy (DOSY) can be used to analyze mixtures of compounds since resonances deriving from different compounds are distinguished by their diffusion coefficients (D). Previously, DOSY has mostly been used for organometallic and polymer analysis, we have now applied DOSY to investigate diffusion coefficients of structurally diverse organic compounds such as natural products (NP). The experimental Ds derived from 55 diverse NPs has allowed us to establish a power law relationship between D and molecular weight (MW) and therefore predict MW from experimental D. We have shown that D is also affected by factors such as hydrogen bonding, molar density and molecular shape of the compound and we have generated new models that incorporate experimentally derived variables for these factors so that more accurate predictions of MW can be calculated from experimental D. The recognition that multiple physicochemical properties affect D has allowed us to generate a polynomial equation based on multiple linear regression analysis of eight calculated physicochemical properties from 63 compounds to accurately correlate predicted D with experimental D for any known organic compound. This equation has been used to calculate predicted D for 217 043 compounds present in a publicly available natural product database (DEREP-NP) and to dereplicate known NPs in a mixture based on matching of experimental D and structural features derived from NMR analysis with predicted D and calculated structural features in the database. These models have been validated by the dereplication of a mixture of two known sesquiterpenes obtained from Tasmannia xerophila and the identification of new alkaloids from the bryozoan Amathia lamourouxi. These new methodologies allow the MW of compounds in mixtures to be predicted without the need for MS analysis, the dereplication of known compounds and identification of new compounds based solely on parameters derived by DOSY NMR.

We report accurate DOSY NMR based molecular weight and diffusion coefficient prediction tools. These tools can be used to dereplicate known natural products from databases using structurally rich NMR data as a surrogate for mass spectrometric data.

Multiplexing experiments in NMR and multi-nuclear MRI

Multiplexing NMR experiments by direct detection of multiple free induction decays (FIDs) in a single experiment offers a dramatic increase in the spectral information content and often yields significant improvement in sensitivity per unit time. Experiments with multi-FID detection have been designed with both homonuclear and multinuclear acquisition, and the advent of multiple receivers on commercial spectrometers opens up new possibilities for recording spectra from different nuclear species in parallel. Here we provide an extensive overview of such techniques, designed for applications in liquid- and solid-state NMR as well as in hyperpolarized samples. A brief overview of multinuclear MRI is also provided, to stimulate cross fertilization of ideas between the two areas of research (NMR and MRI). It is shown how such techniques enable the design of experiments that allow structure elucidation of small molecules from a single measurement. Likewise, in biomolecular NMR experiments multi-FID detection allows complete resonance assignment in proteins. Probes with multiple RF microcoils routed to multiple NMR receivers provide an alternative way of increasing the throughput of modern NMR systems, effectively reducing the cost of NMR analysis and increasing the information content at the same time. Solid-state NMR experiments have also benefited immensely from both parallel and sequential multi-FID detection in a variety of multi-dimensional pulse schemes. We are confident that multi-FID detection will become an essential component of future NMR methodologies, effectively increasing the sensitivity and information content of NMR measurements.

Challenges and Advances in the Application of Dynamic Nuclear Polarization to Liquid-State NMR Spectroscopy

Nuclear magnetic resonance (NMR) spectroscopy is a powerful method to study the molecular structure and dynamics of materials. The inherently low sensitivity of NMR spectroscopy is a consequence of low spin polarization. Hyperpolarization of a spin ensemble is defined as a population difference between spin states that far exceeds what is expected from the Boltzmann distribution for a given temperature. Dynamic nuclear polarization (DNP) can overcome the relatively low sensitivity of NMR spectroscopy by using a paramagnetic matrix to hyperpolarize a nuclear spin ensemble. Application of DNP to NMR can result in sensitivity gains of up to four orders of magnitude compared to NMR without DNP. Although DNP NMR is now more routinely utilized for solid-state (ss) NMR spectroscopy, it has not been exploited to the same degree for liquid-state samples. This Review will consider challenges and advances in the application of DNP NMR to liquid-state samples. The Review is organized into four sections: (i) mechanisms of DNP NMR relevant to hyperpolarization of liquid samples; (ii) applications of liquid-state DNP NMR; (iii) available detection schemes for liquid-state samples; and (iv) instrumental challenges and outlook for liquid-state DNP NMR.

Integrated impedance sensing of liquid sample plug flow enables automated high throughput NMR spectroscopy

A novel approach for automated high throughput NMR spectroscopy with improved mass-sensitivity is accomplished by integrating microfluidic technologies and micro-NMR resonators. A flow system is utilized to transport a sample of interest from outside the NMR magnet through the NMR detector, circumventing the relatively vast dead volume in the supplying tube by loading a series of individual sample plugs separated by an immiscible fluid. This dual-phase flow demands a real-time robust sensing system to track the sample position and velocities and synchronize the NMR acquisition. In this contribution, we describe an NMR probe head that possesses a microfluidic system featuring: (i) a micro saddle coil for NMR spectroscopy and (ii) a pair of interdigitated capacitive sensors flanking the NMR detector for continuous position and velocity monitoring of the plugs with respect to the NMR detector. The system was successfully tested for automating flow-based measurement in a 500 MHz NMR system, enabling high resolution spectroscopy and NMR sensitivity of 2.18 nmol s^1/2 with the flow sensors in operation. The flow sensors featured sensitivity to an absolute difference of 0.2 in relative permittivity, enabling distinction between most common solvents. It was demonstrated that a fully automated NMR measurement of nine individual 120 μL samples could be done within 3.6 min or effectively 15.3 s per sample.

NMR-Based Plant Metabolomics in Nutraceutical Research: An Overview

Few topics are able to channel the interest of researchers, the public, and industries, like nutraceuticals. The ever-increasing demand of new compounds or new sources of known active compounds, along with the need of a better knowledge about their effectiveness, mode of action, safety, etc., led to a significant effort towards the development of analytical approaches able to answer the many questions related to this topic. Therefore, the application of cutting edges approaches to this area has been observed. Among these approaches, metabolomics is a key player. Herewith, the applications of NMR-based metabolomics to nutraceutical research are discussed: after a brief overview of the analytical workflow, the use of NMR-based metabolomics to the search for new compounds or new sources of known nutraceuticals are reviewed. Then, possible applications for quality control and nutraceutical optimization are suggested. Finally, the use of NMR-based metabolomics to study the impact of nutraceuticals on human metabolism is discussed.

Experiments with direct detection of multiple FIDs

Pulse schemes with direct observation of multiple free induction decays (FIDs) offer a dramatic increase in the spectral information content of NMR experiments and often yield substantial improvement in measurement sensitivity per unit time. Availability of multiple receivers on the state-of-the-art commercial spectrometers allows spectra from different nuclear species to be recorded in parallel routinely. Experiments with multi-FID detection have been designed with both, homonuclear and multinuclear acquisition. We provide a brief overview of such techniques designed for applications in liquid- and solid- state NMR as well as in hyperpolarized samples. Here we show how these techniques have led to design of experiments that allow structure elucidation of small molecules and resonance assignment in proteins from a single measurement. Probes with multiple RF micro-coils routed to multiple NMR receivers provide an alternative way of increasing the throughput of modern NMR systems. Solid-state NMR experiments have also benefited immensely from both parallel and simultaneous FID acquisition in a variety of multi-dimensional pulse schemes. We believe that multi-FID detection will become an essential component of the future NMR methodologies effectively increasing the information content of NMR experiments and reducing the cost of NMR analysis.

Scalability of Visible-Light-Induced Nickel Negishi Reactions: A Combination of Flow Photochemistry, Use of Solid Reagents, and In-Line NMR Monitoring

The scale up of light-induced nickel-catalyzed Negishi reactions is reported herein, with output rates reaching multigram quantities per hour. This level of throughput is suitable to support preclinical medicinal chemistry programs in late lead optimization, where tens of grams to hundreds of grams of final product is needed. Adjusting reaction times and concentrations was critical in achieving this robust output. This example demonstrates how visible photochemistry and use of solid metal reagent can be used and how the progress of the reaction can be followed by in-line NMR monitoring.

Inline Reaction Monitoring of Amine-Catalyzed Acetylation of Benzyl Alcohol Using a Microfluidic Stripline Nuclear Magnetic Resonance Setup

We present an in-depth study of the acetylation of benzyl alcohol in the presence of N, N-diisopropylethylamine (DIPEA) by nuclear magnetic resonance (NMR) monitoring of the reaction from 1.5 s to several minutes. We have adapted the NMR setup to be compatible to microreactor technology, scaling down the typical sample volume of commercial NMR probes (500 μL) to a microfluidic stripline setup with 150 nL detection volume. Inline spectra are obtained to monitor the kinetics and unravel the reaction mechanism of this industrially relevant reaction. The experiments are combined with conventional 2D NMR measurements to identify the reaction products. In addition, we replace DIPEA with triethylamine and pyridine to validate the reaction mechanism for different amine catalysts. In all three acetylation reactions, we find that the acetyl ammonium ion is a key intermediate. The formation of ketene is observed during the first minutes of the reaction when tertiary amines were present. The pyridine-catalyzed reaction proceeds via a different mechanism.

Structure elucidation of metabolite x17299 by interpretation of mass spectrometric data

INTRODUCTION

A major bottleneck in metabolomic studies is metabolite identification from accurate mass spectrometric data. Metabolite x17299 was identified in plasma as an unknown in a metabolomic study using a compound-centric approach where the associated ion features of the compound were used to determine the true molecular mass.

OBJECTIVES

The aim of this work is to elucidate the chemical structure of x17299, a new compound by de novo interpretation of mass spectrometric data.

METHODS

An Orbitrap Elite mass spectrometer was used for acquisition of mass spectra up to MS4 at high resolution. Synthetic standards of N,N,N-trimethyl-l-alanyl-l-proline betaine (l,l-TMAP), a diastereomer, and an enantiomer were chemically prepared.

RESULTS

The planar structure of x17299 was successfully proposed by de novo mechanistic interpretation of mass spectrometric data without any laborious purification and nuclear magnetic resonance spectroscopic analysis. The proposed structure was verified by deuterium exchanged mass spectrometric analysis and confirmed by comparison to a synthetic standard. Relative configuration of x17299 was determined by direct chromatographic comparison to a pair of synthetic diastereomers. Absolute configuration was assigned after derivatization of x17299 with a chiral auxiliary group followed by its chromatographic comparison to a pair of synthetic standards.

CONCLUSION

The chemical structure of metabolite x17299 was determined to be l,l-TMAP.

Breaking the silence: new strategies for discovering novel natural products

Natural products have been a prolific source of antibacterial and anticancer drugs for decades. One of the major challenges in natural product discovery is that the vast majority of natural product biosynthetic gene clusters (BGCs) have not been characterized, partially due to the fact that they are either transcriptionally silent or expressed at very low levels under standard laboratory conditions. Here we describe the strategies developed in recent years (mostly between 2014-2016) for activating silent BGCs. These strategies can be broadly divided into two categories: approaches in native hosts and approaches in heterologous hosts. In addition, we briefly discuss recent advances in developing new computational tools for identification and characterization of BGCs and high-throughput methods for detection of natural products.

Metabolism and excretion of 1-hydroxymethylpyrene, the proximate metabolite of the carcinogen 1-methylpyrene, in rats

1-Methylpyrene, an alkylated polycyclic aromatic hydrocarbon and environmental carcinogen, is activated by side-chain hydroxylation to 1-hydroxymethylpyrene (1-HMP) and subsequent sulfo conjugation to the DNA-reactive 1-sulfooxymethylpyrene. In addition to the bioactivation, processes of metabolic detoxification and transport greatly influence the genotoxicity of 1-methylpyrene. For a better understanding of 1-HMP detoxification in vivo we studied urinary and fecal metabolites in rats following intraperitoneal doses of 19.3mg 1-HMP/kg body weight (5 rats) or the same dose containing 200μCi [(14)C]1-HMP/kg body weight (2 rats). After 48h, 48.0% (rat 1) and 29.1% (rat 2) of the radioactivity was recovered as 1-HMP in the feces. Six major metabolites were observed by UV and on-line radioactivity detection in urine samples and feces after HPLC separation. The compounds were characterized by mass spectrometry, (1)H NMR and (1)H-(1)H COSY NMR spectroscopy, which allowed assigning tentative molecular structures. Two prominent metabolites, 1-pyrene carboxylic acid (M-6) and the acyl glucuronide of 1-pyrene carboxylic acid (M-5) accounted for 17.7% (rat 1) and 25.2% (rat 2) of the overall radioactive dose. Further, we detected the acyl glucuronide of 6-hydroxy-1-pyrene carboxylic acid (M-1) and 8-sulfooxy-1-pyrene carboxylic acid (M-3) together with two regioisomers of M-3 (M-2 and M-4) differing in position of the sulfate group at the pyrene ring. In urine samples, the radioactivity of 1-pyrene carboxylic acid and its five derivatives amounted to 32.4% (rat 1) or 45.5% (rat 2) of the total [(14)C]1-HMP dose.

Assessment of dietary exposure and effect in humans: The role of NMR

In human nutritional science progress has always depended strongly on analytical measurements for establishing relationships between diet and health. This field has undergone significant changes as a result of the development of NMR and mass spectrometry methods for large scale detection, identification and quantification of metabolites in body fluids. This has allowed systematic studies of the metabolic fingerprints that biological processes leave behind, and has become the research field of metabolomics. As a metabolic profiling technique, NMR is at its best when its unbiased nature, linearity and reproducibility are exploited in well-controlled nutritional intervention and cross-sectional population screening studies. Although its sensitivity is less good than that of mass spectrometry, NMR has maintained a strong position in metabolomics through implementation of standardisation protocols, hyphenation with mass spectrometry and chromatographic techniques, accurate quantification and spectral deconvolution approaches, and high-throughput automation. Thus, NMR-based metabolomics has contributed uniquely to new insights into dietary exposure, in particular by unravelling the metabolic fates of phytochemicals and the discovery of dietary intake markers. NMR profiling has also contributed to the understanding of the subtle effects of diet on central metabolism and lipoprotein metabolism. In order to hold its ground in nutritional metabolomics, NMR will need to step up its performance in sensitivity and resolution; the most promising routes forward are the analytical use of dynamic nuclear polarisation and developments in microcoil construction and automated fractionation.

Practical aspects of real-time reaction monitoring using multi-nuclear high resolution FlowNMR spectroscopy

FlowNMR spectroscopy is an excellent technique for non-invasive real-time reaction monitoring under relevant conditions that avoids many of the limitations that bedevil other reaction monitoring techniques.

Real-time Monitoring of Reactions Performed Using Continuous-flow Processing: The Preparation of 3-Acetylcoumarin as an Example

By using inline monitoring, it is possible to optimize reactions performed using continuous-flow processing in a simple and rapid way. It is also possible to ensure consistent product quality over time using this technique. We here show how to interface a commercially available flow unit with a Raman spectrometer. The Raman flow cell is placed after the back-pressure regulator, meaning that it can be operated at atmospheric pressure. In addition, the fact that the product stream passes through a length of tubing before entering the flow cell means that the material is at RT. It is important that the spectra are acquired under isothermal conditions since Raman signal intensity is temperature dependent. Having assembled the apparatus, we then show how to monitor a chemical reaction, the piperidine-catalyzed synthesis of 3-acetylcoumarin from salicylaldehyde and ethyl acetoacetate being used as an example. The reaction can be performed over a range of flow rates and temperatures, the in-situ monitoring tool being used to optimize conditions simply and easily.

A self optimizing synthetic organic reactor system using real-time in-line NMR spectroscopy

A configurable platform for synthetic chemistry incorporating an in-line benchtop NMR that is capable of monitoring and controlling organic reactions in real-time is presented. The platform is controlled via a modular LabView software control system for the hardware, NMR, data analysis and feedback optimization. Using this platform we report the real-time advanced structural characterization of reaction mixtures, including 19F, 13C, DEPT, 2D NMR spectroscopy (COSY, HSQC and 19F-COSY) for the first time. Finally, the potential of this technique is demonstrated through the optimization of a catalytic organic reaction in real-time, showing its applicability to self-optimizing systems using criteria such as stereoselectivity, multi-nuclear measurements or 2D correlations.

The re-emergence of natural products for drug discovery in the genomics era

Natural products have been a rich source of compounds for drug discovery. However, their use has diminished in the past two decades, in part because of technical barriers to screening natural products in high-throughput assays against molecular targets. Here, we review strategies for natural product screening that harness the recent technical advances that have reduced these barriers. We also assess the use of genomic and metabolomic approaches to augment traditional methods of studying natural products, and highlight recent examples of natural products in antimicrobial drug discovery and as inhibitors of protein-protein interactions. The growing appreciation of functional assays and phenotypic screens may further contribute to a revival of interest in natural products for drug discovery.

Plant Chemical Defenses: Are all Constitutive Antimicrobial Metabolites Phytoanticipins?

A critical perspective on phytoanticipins, constitutive plant secondary metabolites with defensive roles against microbes is presented. This mini-review focuses on the chemical groups and structural types of defensive plant metabolites thus far not reviewed from the phytoanticipin perspective: i) fatty acid derivatives and polyketides, ii) terpenoids, iii) shikimates, phenylpropanoids and derivatives, and iv) benzylisoquinoline and pyrrolizidine alkaloids. The more traditional groups of phytoanticipins are briefly summarized, with particular focus on the latest results: i) benzoxazinoids, ii) cyanogenic glycosides, iii) glucosinolates and their metabolic products, and iv) saponins. Current evidence suggests that a better understanding of the functions of plant metabolites will drive their application to protect crops against microbial diseases.

Thermostatted micro-reactor NMR probe head for monitoring fast reactions

A novel nuclear magnetic resonance (NMR) probe head for monitoring fast chemical reactions is described. It combines micro-reaction technology with capillary flow NMR spectroscopy. Two reactants are fed separately into the probe head where they are effectively mixed in a micro-mixer. The mixed reactants then pass through a capillary NMR flow cell that is equipped with a solenoidal radiofrequency coil where the NMR signal is acquired. The whole flow path of the reactants is thermostatted using the liquid FC-43 (perfluorotributylamine) so that exothermic and endothermic reactions can be studied under almost isothermal conditions. The set-up enables kinetic investigation of reactions with time constants of only a few seconds. Non-reactive mixing experiments carried out with the new probe head demonstrate that it facilitates the acquisition of constant highly resolved NMR signals suitable for quantification of different species in technical mixtures. Reaction kinetic measurements on a test system are presented that prove the applicability of the novel NMR probe head for monitoring fast reactions.

Raman spectroscopy as a tool for monitoring mesoscale continuous-flow organic synthesis: Equipment interface and assessment in four medicinally-relevant reactions

An apparatus is reported for real-time Raman monitoring of reactions performed using continuous-flow processing. Its capability is assessed by studying four reactions, all involving formation of products bearing α,β-unsaturated carbonyl moieties; synthesis of 3-acetylcoumarin, Knoevenagel and Claisen–Schmidt condensations, and a Biginelli reaction. In each case it is possible to monitor the reactions and also in one case, by means of a calibration curve, determine product conversion from Raman spectral data as corroborated by data obtained using NMR spectroscopy.

Recent advances and new strategies in the NMR-based identification of natural products

Nature comprises an untapped pool of unique compounds with high structural uniqueness and exceptional properties. At the core of natural products (NPs) discovery is the identification procedure and NMR remains the most efficient method. Technical improvements such as miniaturized and crycogenic NMR probes along with hyphenation capabilities and computational support are at the center of evolution. Concepts such as dereplication and metabolomics are increasingly adopted in NPs using the power of databases, currently fragmented. The introduction and utilization of these technical and computational implements could lead NPs research to more comprehensive structure identification and new holistic perspectives.

Metabolomics: a novel approach to identify potential diagnostic biomarkers and pathogenesis in Alzheimer's disease

Although the pathogenesis of Alzheimer's disease (AD) is still not fully understood, it is acknowledged that intervention should be made at the early stage. Therefore, identifying biomarkers for the clinical diagnosis is critical. Metabolomics, a novel "omics", uses methods based on low-molecular-weight molecules, with high-throughput evaluation of a large number of metabolites that may lead to the identification of new disease-specific biomarkers and the elucidation of pathophysiological mechanisms. This review discusses metabolomics investigations of AD and potential future developments in this field.

Liquid chromatography-nuclear magnetic resonance coupling as alternative to liquid chromatography-mass spectrometry hyphenations: curious option or powerful and complementary routine tool?

Combining the most powerful separation techniques, i.e. liquid chromatography (LC) or capillary electrophoresis (CE) with a information rich detection system - the mass spectrometer or the nuclear magnetic resonance (NMR) spectrometer - has been pursued for more than three decades. This compilation shall provide an overview of the advantages and limitations of the LC-NMR hyphenation in the light of its most valued application-the unequivocal analyte identification. Especially the post LC trapping of analytes with an in-line solid phase extraction (SPE) device prior to transferring the analyte of interest to the NMR spectrometer (LC-SPE-NMR) proved to be a robust installation allowing a significant cut-down of the amount of analyte needed for the generation of high quality heteronuclear NMR shift correlation data. Different available technical realizations will be discussed and typical application examples from natural product research and from industrial settings will be given.