Monoclonal antibodies with group specificity toward sulfonamides: selection of hapten and antibody selectivity

Advancements in the preparation technology of small molecule artificial antigens and their specific antibodies: a comprehensive review

Small molecules find extensive application in medicine, food safety, and environmental studies, particularly in biomedicine. Immunoassay technology, leveraging the specific recognition between antigens and antibodies, offers a superior alternative to traditional physical and chemical analysis methods. This approach allows for the rapid and accurate detection of small molecular compounds, owing to its high sensitivity, specificity, and swift analytical capabilities. However, small molecular compounds often struggle to effectively stimulate an immune response due to their low molecular weight, weak antigenicity, and limited antigenic epitopes. To overcome this, coupling small molecule compounds with macromolecular carriers to form complete antigens is typically required to induce specific antibodies in animals. Consequently, the preparation of small-molecule artificial antigens and the production of efficient specific antibodies are crucial for achieving precise immunoassays. This paper reviews recent advancements in small molecule antibody preparation technology, emphasizing the design and synthesis of haptens, the coupling of haptens with carriers, the purification and identification of artificial antigens, and the preparation of specific antibodies. Additionally, it evaluates the current technological shortcomings and limitations while projecting future trends in artificial antigen synthesis and antibody preparation technology.

Generation of a highly specific recombinant full-length antibody for detecting ethirimol in fruit and environmental water

High-performance antibodies are core reagents for highly sensitive immunoassays. Herein, based on a novel hapten, a hybridoma secreting the high-affinity anti-ethirimol monoclonal antibody (mAb-14G5F6) was isolated with an IC50 value of 1.35 μg/L and cross-reactivity below 0.20% for 13 analogs. To further address the challenge of hybridoma preservation and antibody immortalization, a recombinant full-length antibody (rAb-14G5F6) was expressed using the HEK293(F) expression system based on the mAb-14G5F6 gene. The affinity, specificity, and tolerance of rAb-14G5F6, as characterized by indirect competitive enzyme-linked immunosorbent assay and noncompetitive surface plasmon resonance, exhibited high concordance with those of mAb-14G5F6. Further immunoassays based on rAb-14G5F6 were developed for irrigation water and strawberry fruit with limits of detection of 0.0066 and 0.036 mg/kg, respectively, recoveries of 80100%, and coefficients of variation below 10%. Furthermore, homology simulation and molecular docking revealed that GLU(L40), GLY(L107), GLY(H108), and ASP(H114) play important roles in forming hydrogen bonds and pi-anion ionic bonds between rAb-14G5F6 and ethirimol, resulting in the high specificity and affinity of rAb-14G5F6 for ethirimol, with a KD of 5.71 × 10-10 mol/L. Overall, a rAb specific for ethirimol was expressed successfully in this study, laying the groundwork for rAb-based immunoassays for monitoring fungicide residues in agricultural products and the environment.

Development of a receptor based signal amplified fluorescence polarization assay for multi-detection of 35 sulfonamides in pork

With the increasing focus on food security, a screening method with high-throughput, ultra-sensitivity, and user-friendly operation is urgently needed for monitoring of sulfonamides residues in animal-derived foods. In this study, the sulfonamides' receptor dihydropteroate synthase of Staphylococcus aureus was subjected to saturate mutation, and a mutant with higher affinities for sulfonamides was obtained. The mutant was then used as recognition material to establish a fluorescence polarization assay for determination of 35 sulfonamides in pork. Due to the use of an enhanced fluorescent tracer containing two fluorophore molecules, the sensitivities for the 35 sulfonamides were improved for 2.8-8.6 folds (LODs 0.03-1.16 ng/mL) in comparison with using conventional fluorescent tracer. The present method outperformed all previous fluorescence polarization (immuno)assays for sulfonamides due to its broader spectrum, higher sensitivity, and shorter assay time. Furthermore, this is the first study reporting an enhanced fluorescence polarization assay for determination of small molecule substance.

Precise isolation and structural origin of an ultra-specific nanobody against chemical compound

Highly specific antibodies are the key reagents for developing immunoassays with a low false positive rate for environmental monitoring. Here, we provide evidence that nanobodies have the potential to achieve higher specificity than conventional antibodies and explain why from their structural features. Using sulfadimethoxine (SDM) as a model analyte, we constructed an immune phage display library and precisely isolated an ultra-specific nanobody (H1-17) by a crucial homologous antigen counter selection strategy. H1-17 showed no observable cross-reactivity (CR) with other structural analogs of 41 SDM tested, which has never been achieved by conventional antibodies. The structurally original specificity of H1-17 was illuminated and compared with that of one conventional antibody by homology modeling and site-directed mutagenesis validation. It was found that the noncanonical disulfide bond (C50-C104) of H1-17 helped CDR3 form a tailor-made binding pocket and divide it into two parts to accommodate the common structure of sulfonamides and the characteristic methoxyl group of SDM, respectively. Besides, the mutual-checking hydrogen bonds also played important roles in the specific recognition. Lastly, immunoassays with zero false positive rate were developed to screen SDM in water and milk samples, indicating that nanobodies could be reliable reagents for the accurate detection of chemical compounds.

Two-dimensional material-enhanced surface plasmon resonance for antibiotic sensing

Two-dimensional (2D) materials attract attention from the academic community due to their excellent properties, and their wide application in sensing is expected to revolutionize environmental monitoring, medical diagnostics, and food safety. In this work, we systematically evaluate the effects of 2D materials on the Au chip surface plasmon resonance (SPR) sensor. The results reveal that 2D materials cannot improve the sensitivity of intensity-modulated SPR sensors. However, there exists an optimal real part of RI of 3.5-4.0 and optimal thickness when choosing nanomaterials for sensitivity enhancement of SPR sensors in angular modulation. In addition, the smaller the imaginary part of the nanomaterial RI, the higher the sensitivity of the proposed Au SPR sensor. The 2D material's thickness needed for the highest sensitivity decreases with increasing real part and imaginary part of the RI. As a case study, we developed a 5 nm-thickness MoS₂-enhanced SPR biosensor, which exhibited a low sulfonamides (SAs) detection limit of 0.05 μg/L based on a group-targeting indirect competitive immunoassay, nearly 12-fold lower than that of the bare Au SPR system. The proposed criteria help to shed light on the 2D material-Au surface interaction, which has greatly promoted the development of novel SPR biosensing with outstanding sensitivity.

A highly sensitive lateral flow immunoassay based on a group-specific monoclonal antibody and amorphous carbon nanoparticles for detection of sulfonamides in milk

To meet high-throughput screening of the residues of sulfonamides (SAs) with high sensitivity toward sulfamethazine (SM2) in milk samples, a new highly sensitive lateral flow immunoassay (LFA) based on amorphous carbon nanoparticles (ACNs) was developed. First, a group-specific monoclonal antibody 10H7 (mAb 10H7) that could recognize 25 SAs with high sensitivity toward SM2 (IC₅₀ value of 0.18 ng/mL) was prepared based on H1 as an immune hapten and H4 as a heterologous coating hapten. Then, mAb 10H7 was conjugated to ACNs as an immune probe for LFA development. Under the optimized conditions, the LFA could detect 25 SAs with the cut-off value toward SM2 of 2 ng/mL, which could meet the requirement for detection of SAs. In addition, the LFA developed was also used for screening SAs' residues in real milk samples, with results being consistent with HPLC-MS/MS. Thus, this LFA can be used as a high-throughput screening tool for detection of SAs.

Development of epitopephore-based rational hapten design strategy: A combination of theoretical evidence and experimental validation

Antibody is the key biomolecule that governing the sensitivity and specificity of an immunoassay for chemical compound, also named hapten molecule. Obviously, predication of hapten effectiveness before chemical synthesis is beneficial to boost success, save cost and improve controllability. Here, we proposed and evaluated an epitopephore based rational hapten design (ERHD) to assist antibody production to chemical compound, combining theoretical evidence and then experimental validation by using dinitrocarbanilide (DNC) as a model analyte. Briefly, epitopephores of DNC were firstly generated by HipHop algorithm after features mapping. A homemade drug database also containing reported fragment haptens (HFR) and new designed full hapten (HFU) were constructed, and then was virtually screened by using generated epitopephore followed by structural analysis and visual inspection. The DNC haptens based on the selected hits were further identified by Density Functional Theory before total synthesis. To prove and clarify the usability of the ERHD, two retrieved HFU haptens, one non-retrieved HFU hapten and three non-retrieved HFR haptens were all selected to produce monoclonal antibodies (mAbs) for comparison purpose. A maximal 6000-fold increased affinity of mAb from retrieved HFU than HFR was observed, while, non-retrieved HFU failed to produce antibody to DNC. More importantly, mAbs from HFU haptens provided highly specificity to DNC, while, mAbs from HFR haptens could recognize 15 others analogues. We then constructed antibody structure and investigated molecular recognition of the mAbs to DNC, well supporting the rationality of the ERHD. Lastly, an icELISA was developed for DNC with an IC₅₀ value as low as 0.19 ng mL^-1 with high specificity, which has never achieved before.

Group-targeting sulfonamides via an evanescent-wave biosensor based on rational designed coating antigen

In order to effectively monitor a wide variety of sulfonamides residues in the environment, group-targeting immunoassay based on the group-specific antibodies has attracted great attentions, which can realize the detection of a group of contaminants in environment as many as possible even the unrecognized ones. Indirect competitive immunoassay is generally adopted for small molecule detection however the rational design of immobilized coating antigen for improved recognition capability on the solid surface is far from enough. To cover the research gap, we proposed the design criteria of coating antigen for surface-based indirect competitive immunoassay based on the molecular docking. Taking the group-specific antibodies against sulfonamides (SA) as a proof-of-concept, a hapten with a linking arm with 3 methyl groups was selected to synthesize the coating antigen. Through surface immobilization of coating antigen, a portable biosensor for group-targeting immunoassay of sulfonamides was developed and demonstrated excellent performance with detection limits lower than 0.6 μg/L for four SA variants, and the cross-reactivities of 148-215 % relative to sulfadiazine. The recovery rates of SAs in liquid milk ranges from 87 to 97 %, which confirmed the application potential of this method in the determination of SAs. Its capability to measure total SAs in a simple and low-cost way would pave the way for a variety of application fields.

The influence of hapten spacer arm length on antibody response and immunoassay development

Antibodies against small molecules with high titer and high affinity are always pursued in the field of vaccines for drugs of abuse, antidotes to toxins and immunoassays in medical, environmental, and food safety. The exposure degree of the target molecule to the immune system is critical to induce a strongly specific antibody response, thus, the spacer arm length between the target molecule and carrier protein plays an important role. However, the influence of spacer arm length on antibody titer, affinity, and assay performance is not yet clear and highly demanded to be addressed. In the present study, we proposed a model study to answer the question by using two typical small molecules, melamine and p-nitroaniline, which were introduced by varied spacer arms with increasing alkane linear length from 2 to 12 carbon atoms brick by brick. The spacer arm lengths of the haptens were obtained by computational chemistry. The titer and affinity of mouse antisera were analyzed and compared, showing that all haptens with spacer arms of 6-8 carbon atoms, i.e. 6.3-8.8 Å in length, induced strong antibodies represented by the highest titer and affinity without exception, while the haptens with spacer arms of 2-4 carbon atoms and 10-12 carbon atoms, i.e. 1.5-3.9 Å and 11.3-13.9 Å in length, failed to induce high-quality antibody response. Moreover, the titer and sensitivity of the subsequently developed immunoassays were significantly affected by using coating haptens with different spacer arm lengths, and coating haptens with a spacer arm of 6.3-8.8 Å in length delivered the optimum detection performance. The antibody recognition mechanism study further confirmed that the hapten spacer arm length had a critical effect on the recognition properties of the induced antibody, which should be interactive with the spacer arm each other. This study showed that the hapten with appropriate spacer arm length is important to antibody response and immunoassay development, providing a valuable and general clue for the rational design of hapten.

Dual-Wavelength Fluorescence Polarization Immunoassay for Simultaneous Detection of Sulfonamides and Antibacterial Synergists in Milk

Combinations of sulfonamides (SAs) and antibacterial synergists (ASGs) are frequently used for treating infectious diseases and promoting growth for animals, which cause potential hazards to food safety and human health. To realize the simultaneous detection of SAs and ASGs in food, a homogeneous and high-throughput screening dual-wavelength fluorescence polarization immunoassay (DWFPIA) was developed. In this study, three SAs tracers and three ASGs tracers were synthesized by fluoresceins with different linkers and paired with their corresponding monoclonal antibodies (mAbs), respectively. To achieve a high sensitivity and broad specificity, the combination of tracers SADMPM-HDF with the longest linker paring mAb 10E6 for SAs and tracer HaptenA-DSCA paring mAb 9C9 for ASGs were chosen for the development of DWFPIA, achieving surprising IC₅₀ values for 23 SAs below 100 μg L^-1 and 5 ASGs below 50 μg L^-1. The accuracy of DWFPIA was applied in real milk samples by typical sulfamethazine (SMZ) and trimethoprim (TMP), with recoveries of 81.7-97.2% and 78.6-103.6%, and coefficient of variations (CVs) below 18.9%, which could be completed within 15 min, including sample pretreatment. We firstly developed a simultaneous screening DWFPIA, covering all of the SAs and ASGs used in clinic and providing a great application potential in food safety analysis.

Production of a Natural Dihydropteroate Synthase and Development of a Signal-Amplified Pseudo-Immunoassay for the Determination of Sulfonamides in Pork

In this study, a type of magnetic photoaffinity-labeled activity-based protein profiling probe for sulfonamide drugs was first synthesized for the purpose of capturing the natural dihydropteroate synthase of Escherichia coli by using simple incubation and magnetic separation. After characterization of its identity with LC-ESI-MS/MS, this enzyme was used as a recognition reagent to develop a direct competitive pseudo-ELISA for the determination of the residues of 40 sulfonamides in pork. Because of the use of streptavidin-horseradish peroxidase and biotinylated horseradish peroxidase as a signal-amplified system, the limits of detection for the 40 drugs were in the range of 0.001-0.016 ng/mL. Compared to the steps in a conventional assay formation, the operation steps were the same, but the sensitivities increased 32-88-fold. Furthermore, the assay performances were better than the previously reported immunoassays performances for sulfonamides. Therefore, this method could be used as a practical tool for multiscreening the trace levels of sulfonamides residues in food samples.

ELISA-Based Method for Variant-Independent Detection of Total Microcystins and Nodularins via a Multi-immunogen Approach

Required routine monitoring of microcystins (MCs) and nodularins (NODs) in water samples, as posed by U.S. EPA Unregulated Contaminant Monitoring Rule 4, demands cost-effective, reliable, and sensitive detection methods. To target as many MC and NOD variants as possible, we developed an indirect competitive enzyme-linked immunosorbent assay (ELISA) with group-specific monoclonal antibodies for variant-independent detection of total MCs and NODs. In this ELISA method, the mice monoclonal antibodies presenting both high affinities and broad-spectrum recognition capabilities against MCs and NODs were self-produced by designing MC hapten-based multi-immunogens to minimize specificity for the particular variant. Their high affinities and variant-independent binding capabilities against MCs and NODs were validated by both wet lab and in silico methods. The developed ELISA method achieved a limit of detection of below 0.3 μg/L for 13 MC/NOD variants, well with the reported best cross-reactivities of 60-127% relative to MC-LR. As a case study, this ELISA method was used to map the variations of intracellular and extracellular total MCs/NODs in the Luoma Lake drinking water source, China, in July, 2020. Its capability to measure total MCs/NODs with high sensitivity and high throughput in a simple and affordable way would truly be a disruptive technology capable of changing our understanding of bloom/toxin dynamics and having obvious implications for monitoring efforts.

Engineering of Organic Solvent-Tolerant Antibody to Sulfonamides by CDR Grafting for Analytical Purposes

The use of organic solvents to extract chemical contaminants for an immunoassay is mostly inevitable. On this occasion, the intolerance of natural antibodies against organic solvent is detrimental to the performance of immunoassays in terms of sensitivity, assay time, accuracy, and precision. Few studies have focused on improving the low tolerance of natural antibodies to organic solvents for analytical purposes. In this study, we engineered the monoclonal antibody (mAb) 4D11 to sulfonamides through CDR grafting by using one proven highly stable humanized antibody (hAb) 4D5 for the first time. The engineered antibody hAb 4D11 showed significantly improved tolerance abilities to acetonitrile (2% to 20%) and methanol (10% to 20%), and retained the highly affinity and class-specificity to sulfonamides. This study provided a general strategy to improve antibody tolerance to organic solvents and was greatly beneficial to the robust development of immunoassays.

Antibody engineering-driven controllable chemiluminescence resonance energy transfer for immunoassay with tunable dynamic range

The donor-acceptor distance is a critical factor for the occurrence of chemiluminescent resonance energy transfer (CRET). We herein evaluate the donor-acceptor distance and transfer efficiency of CRET immunoassays of a series of donors which contain different sized antibody fragments, intact monoclonal antibody (IgG), antigen binding fragment (Fab), and single chain fragment antibody (scFv). Core/multishell quantum dots were used as the acceptor in three CRET systems. IgG is the maximum antibody fragment, leading to the longest donor-acceptor distance and the lowest transfer efficiency. Donors with Fab and scFv show significantly decreased distance and increased transfer efficiency. These results suggest an inverse correlation between donor size and transfer efficiency and can be used to provide guidance for the construction of controllable CRET. By combining the controllable CRET with immunoassay, we further develop a tunable sulfamethazine analytical system. Three different sized donors based CRET immunoassay show a markedly different sensitivity and dynamic range. Such adjustable detection provides greater flexibility for contaminant detection in different foodstuffs with different residue limits. This work not only illustrates the effect of donor-acceptor distance on regulating the energy transfer efficiency of CRET system, but also provides a guideline for the construction of a tunable immunoassay.

Production of generic monoclonal antibody and development of chemiluminescence immunoassay for determination of 32 sulfonamides in chicken muscle

A hapten of sulfabenzamide was first synthesized to generate a monoclonal antibody that simultaneously recognized 32 sulfonamides. The computational simulation showed that the 3D conformation, molecular bend angle, molecular volume, electronic charge of core structure of these drugs all showed influences on the antibody binding. The antibody was combined with a heterologous enzyme-labeled hapten to develop a direct competitive chemiluminescence enzyme linked immunosorbent assay for determination of the 32 sulfonamides in chicken muscle sample. The CRs of the optimized method for these drugs were in the range of 7.3%-1778%, and the IC₅₀ values were in the range of 0.038-11.2 ng/g. The limits of detection for detection of these drugs in chicken were in the range of 0.03-26 ng/g. Their recoveries from the standards fortified blank chicken samples were in the range of 60.8%-97.1%. Therefore, this method could be used as a useful tool for routine screening sulfonamides residues in meat.

A competitive immunosensor for ultrasensitive detection of sulphonamides from environmental waters using silver nanoparticles decorated single-walled carbon nanohorns as labels

A novel competitive electrochemical immunosensor based on Au nanodendrites (Au NDs)/silver nanoparticles (Ag NPs) @single-walled carbon nanohorns (SWCNHs) was established for sensitive determination of sulphonamides (SAs) in aquatic environments. The indirectly competitive binding system of the approach was composed of coating antigen that coated on Au NDs/glass carbon electrode (GCE), the target and primary antibody (Ab₁). When Ab₂@Ag NPs@SWCNHs was captured by coating antigen (Cag)- Ab₁ complex, massive Ag⁺ will be released from electrode in the presence nitric acid (HNO₃), consequently, the generated Ag⁺ will significantly amplify the electrochemical signal, which would be recorded by the linear sweep voltametry (LSV). Meanwhile, the used three-dimensional Au nanodendrites (Au NDs) could increase the conductivity of the electrode and the size of the active surface area to improve the antigen-loading. Under the optimal conditions, the immunosensor showed a good linear relationship for sulfamethazine (SMZ)ranged in 0.33-63.81 ng/mL with a detection limit of 0.12 ng/mL (LOD, based on 90% inhibition). In addition, the proposed approach exhibited satisfactory accuracy and precision (recoveries, 79.25-119.25%; CV, 2.14-9.58%), it can be applied for rapid analysis of the trace pollutants from environmental waters.

Novel hapten design, antibody recognition mechanism study, and a highly sensitive immunoassay for diethylstilbestrol in shrimp

Over the past few years, there has been a lack of progress in the quality of diethylstilbestrol (DES) antibodies used in immunoassay. In this study, a new immunizing hapten was designed for remarkably sensitive and specific antibody generation against diethylstilbestrol. By introducing a benzene ring instead of the traditional linear chain alkane as the hapten spacer, a more specific immune reaction was induced in the process of immunization. The developed polyclonal antibodies were characterized using the indirect competitive enzyme-linked immunosorbent assay (icELISA). Under optimized conditions, the half maximal inhibitory concentration (IC₅₀) of the best polyclonal antibody was 0.14 ng/mL and it displayed low cross-reactions (CRs) with the structural analogs such as hexestrol (HEX) and dienestrol (DI). The molecular modeling and quantum chemical computation revealed that the lowest CR of the DES antibody to DI was mainly due to the huge three-dimensional conformational difference between DES and DI. Finally, a highly sensitive icELISA method based on the polyclonal antibody was developed for the determination of DES in shrimp tissue. The limit of detection (LOD) was as low as 0.2 μg/kg in shrimp and the recoveries in the spiked samples ranged from 83.4 to 90.8% with the coefficient of variation less than 13.8%. These results indicated that the use of an aromatic ring as the immunizing hapten spacer arm could be a potential strategy for the enhancement of anti-DES antibody sensitivity, and the established icELISA was applicable to the trace detection of DES in shrimp. Graphical abstract.

Determination of sulfonamides in meat with dummy-template molecularly imprinted polymer-based chemiluminescence sensor

In this study, a molecularly imprinted polymer capable of recognizing 15 sulfonamides was first synthesized with sulfabenz as the dummy template. The calculation results from computation simulation showed that the specific 3D conformation of the template had an important influence on the polymer's recognition ability. Then, the polymer was used as recognition reagent to prepare a chemiluminescence sensor on a conventional 96-well microplate for the determination of the residues of 15 sulfonamides in meat (chicken and pork). Due to the 4-(imidazol-1-yl)phenol-enhanced luminol-H₂O₂ system, the limits of detection for the 15 analytes were in the range of 1.0-12 pg/mL. The recoveries from the standard fortified blank samples were in the range of 72.7-99%. Furthermore, one assay could be finished within 30 min, and the sensor could be reused 4 times. Therefore, this sensor could be used as a very useful tool for routine screening of residues of sulfonamides in meat samples. Graphical abstract Assay procedures of the molecularly imprinted polymer-based chemiluminescence sensor for determination of sulfonamides.

A Class-Selective Immunoassay for Sulfonamides Residue Detection in Milk Using a Superior Polyclonal Antibody with Broad Specificity and Highly Uniform Affinity

The development of multianalyte immunoassays with an emphasis on food safety has attracted increasing interest, due to its high target throughput, short detection time, reduced sample consumption, and low overall cost. In this study, a superior polyclonal antibody (pAb) against sulfonamides (SAs) was raised by using a bioconjugate of bovine serum albumin with a rationally designed hapten 4-[(4-aminophenyl) sulfonyl-amino]-2-methoxybenzoic acid (SA10-X). The results showed that the pAb could recognize 19 SAs with 50% inhibition (IC₅₀) below 100 µg L^-1 and a recognition profile for SAs containing, either a five-atom ring or a six-atom ring, with highly uniform affinity. A three-dimensional quantitative structure-activity relationship analysis indicated that the electrostatic features of SAs play a considerably important role, during recognition with pAb than stereochemical effects. Skimmed milk samples were directly diluted five times before analysis. After optimization, the limit of detection for sulfamonomethoxine, sulfamethoxazole, sulfaquinoxaline, sulfadimethoxine, and sulfamethazine were 1.00, 1.25, 2.95, 3.35, and 6.10 µg L^-1, respectively. The average recoveries for these 5 SAs were 72.0⁻107.5% with coefficients of variation less than 14.1%. The established method, based on pAb, with broad specificity and uniform affinity, offered a simple, sensitive, and high-throughput screening tool for the detection of multi-SAs in milk samples.

Detecting Nonvolatile Life- and Nonlife-Derived Organics in a Carbonaceous Chondrite Analogue with a New Multiplex Immunoassay and Its Relevance for Planetary Exploration

Potential martian molecular targets include those supplied by meteoritic carbonaceous chondrites such as amino acids and polycyclic aromatic hydrocarbons and true biomarkers stemming from any hypothetical martian biota (organic architectures that can be directly related to once living organisms). Heat extraction and pyrolysis-based methods currently used in planetary exploration are highly aggressive and very often modify the target molecules making their identification a cumbersome task. We have developed and validated a mild, nondestructive, multiplex inhibitory microarray immunoassay and demonstrated its implementation in the SOLID (Signs of Life Detector) instrument for simultaneous detection of several nonvolatile life- and nonlife-derived organic molecules relevant in planetary exploration and environmental monitoring. By utilizing a set of highly specific antibodies that recognize D- or L- aromatic amino acids (Phe, Tyr, Trp), benzo[a]pyrene (B[a]P), pentachlorophenol, and sulfone-containing aromatic compounds, respectively, the assay was validated in the SOLID instrument for the analysis of carbon-rich samples used as analogues of the organic material in carbonaceous chondrites or even Mars samples. Most of the antibodies enabled sensitivities at the 1-10 ppb level and some even at the ppt level. The multiplex immunoassay allowed the detection of B[a]P as well as aromatic sulfones in a water/methanol extract of an Early Cretaceous lignite sample (c.a., 140 Ma) representing type IV kerogen. No L- or D-aromatic amino acids were detected, reflecting the advanced diagenetic stage and the fossil nature of the sample. The results demonstrate the ability of the liquid extraction by ultrasonication and the versatility of the multiplex inhibitory immunoassays in the SOLID instrument to discriminate between organic matter derived from life and nonlife processes, an essential step toward life detection outside Earth.

Preparation of high affinity antibody for ribavirin with new haptens and residue analysis in chicken muscle, eggs and duck muscle

In this work, high affinity polyclonal antibodies for ribavirin (RBV) from new haptens were prepared and were used to analyse RBV residues in chicken muscle, eggs and duck muscle. The new haptens were synthesised with different spacers, and the best antibody was obtained with an IC₅₀ value as low as 0.61 ng/mL in indirect competitive enzyme-linked immunosorbent assay (ELISA). The cross-reactivities with another five antiviral drugs including amantadine, rimantadine, moroxydine, zanamivir and oseltamivir were less than 0.1%, which indicated the good specificity of the antibody. An ELISA was developed based on the antibody and applied to detect RBV in multi-food matrices. The sample preparation prior to detection only needed simple dilution after trichloroacetic acid extraction. The limits of detection were 1.07, 1.18 and 1.03 μg/kg in chicken muscle, eggs and duck muscle, respectively. Recoveries ranged from 89.0% to 112.7% with coefficients of variation below 13.0%. Ten blind samples of chicken muscle were analysed simultaneously by ELISA and liquid chromatography-tandem mass spectrometry, and a good correlation between the methods was observed. The results indicated that the high affinity antibody could be applied for the simple and fast detection of RBV in multi-food matrices.

Universal simultaneous multiplex ELISA of small molecules in milk based on dual luciferases

The enzyme-linked immunosorbent assay (ELISA) has become the most important and widely used rapid detection technology for food safety because of its simple operation, fast speed and high sensitivity. Multiplex synchronous detection is the goal of ELISA that is always pursuing for. However, the reported multiplex ELISAs have not truly realized synchronous detection because of the complex signal generation and collection procedures. Here, we developed a dual-luciferases competitive direct bioluminescent immunoassay (DBL-cdELISA) with only one substrate addition step followed immediately by simultaneous signal acquisition. It is the first report of simultaneous multiplex analysis of small molecules based on microtiter plates and enzymes without any additional steps. The IC₅₀ values for norfloxacin (NOR) and sulfamethazine (SMZ) were 0.051 ng mL^-1 and 0.211 ng mL^-1, respectively. The results demonstrated that the application of different luciferases and substrates simplified the signal generation and collection procedures and enabled simultaneous detection of small molecules with a simple procedure, high throughput and fast speed, that will be of great significance for the development of multiple assays.

Ultrasensitive Immunochromatographic Strip for Fast Screening of 27 Sulfonamides in Honey and Pork Liver Samples Based on a Monoclonal Antibody

Group-specific monoclonal antibodies (Mabs) with selectivity for 27 sulfonamides were developed based on new combinations of immunogen and coating antigen. The Mab was able to recognize 27 sulfonamides with 50% inhibition concentration (IC₅₀) values ranging from 0.15 to 15.38 μg/L. In particular, the IC₅₀ values for five sulfonamides (sulfamethazine, sulfaquinoxaline, sulfamonomethoxine, sulfadimethoxine, and sulfamethoxazole) were 0.51, 0.15, 0.56, 0.54, and 2.14 μg/L, respectively. On the basis of the Mab, an immunochromatographic lateral flow strip test was established for rapid screening of sulfonamides in honey samples. The visual limit of detection of the strip test for most sulfonamides in spiked honey samples was below 10 μg/kg, satisfying the requirements of authorities. Positive honey and pork liver samples, which had been confirmed by high-performance liquid chromatography/mass spectrometry, were used to validate the reliability of the proposed strip test. The immunochromatographic lateral flow strip test provides a rapid and convenient method for fast screening of sulfonamides in honey samples.

Wash-free colorimetric homogeneous immunoassay for Zygosaccharomyces rouxii

A rapid and convenient AuNP-based method for detecting large microbes was developed.

Chemiluminescence Resonance Energy Transfer Competitive Immunoassay Employing Hapten-Functionalized Quantum Dots for the Detection of Sulfamethazine

We describe a new strategy for using chemiluminescence resonance energy transfer (CRET) by employing hapten-functionalized quantum dots (QDs) in a competitive immunoassay for detection of sulfamethazine (SMZ). Core/multishell QDs were synthesized and modified with phospholipid-PEG. The modified QDs were functionalized with the hapten 4-(4-aminophenyl-sulfonamido)butanoic acid. The CRET-based immunoassay exhibited a limit of detection for SMZ of 9 pg mL(-1), which is >4 orders of magnitude better than a homogeneous fluorescence polarization immunoassay and is 2 orders of magnitude better than a heterogeneous enzyme-linked immunosorbent assay. This strategy represents a simple, reliable, and universal approach for detection of chemical contaminants.

Structural considerations on the selectivity of an immunoassay for sulfamethoxazole

Sulfamethoxazole (SMX), a sulfonamide, is a widely used bacteriostatic antibiotic and therefore a promising marker for the entry of anthropogenic pollution in the environment. SMX is frequently found in wastewater and surface water. This study presents the production of high affinity and selective polyclonal antibodies for SMX and the development and evaluation of a direct competitive enzyme-linked immunosorbent assay (ELISA) for the quantification of SMX in environmental water samples. The crystal structures of the cross-reacting compounds sulfamethizole, N(4)-acetyl-SMX and succinimidyl-SMX were determined by x-ray diffraction aiming to explain their high cross-reactivity. These crystal structures are described for the first time. The quantification range of the ELISA is 0.82-63µg/L. To verify our results, the SMX concentration in 20 environmental samples, including wastewater and surface water, was determined by ELISA and tandem mass spectrometry (MS/MS). A good agreement of the measured SMX concentrations was found with average recoveries of 97-113% for the results of ELISA compared to LC-MS/MS.

Enzyme-linked immunosorbent assay for the determination of five organophosphorus pesticides in camellia oil

A matrix solid-phase dispersion and direct competitive enzyme-linked immunosorbent assay (MSPD-ELISA) was developed for five organophosphorus pesticides (OPs) in camellia oil. Seven haptens with different substituents in the aromatic ring were used to prepare different competitors; the ELISA showed highest sensitivity and specificity to OPs when the competitor had moderate heterology to the immunizing hapten. Several assay conditions were optimized to increase the ELISA sensitivity. The optimized ELISA for five OPs had 50% inhibitory concentrations of 6.3 ng/ml (parathion), 18.9 ng/ml (methyl parathion), 120.7 ng/ml (fenitrothion), 110.4 ng/ml (fenthion), and 20.7 ng/ml (phoxim). The average recoveries of five OPs in camellia oil ranged from 75.7 to 105.3%, with the interassay coefficient of variations ranging from 6.0 to 13.4%. Compared with the results previously reported, the ELISA that was developed in the present study showed a much higher sensitivity. Additionally, MSPD was used in the sample preparation to minimize the matrix effect. Recoveries from the method developed here were in agreement with those obtained by gas chromatography, which indicated that the detection performance of the MSPD-ELISA could meet the regulatory requirements of different governments and international organizations.