Preliminary study on suitability of ionic liquids as potential passive-sampling media of polyaromatic-hydrocarbon (PAH) analyses in water

On the Behavior of Newly Synthesized Functionalized Imidazolium-Based Ionic Liquids for Highly Efficient Extraction and Separation of Pirimicarb from Orchard Real Wastewater

The presence of pirimicarb compounds as pollutants in orchard wastewater has sparked rising worries about their detrimental impacts on the ecosystem and human health, and their removal is critical for Pakistan’s aquatic environment. It not only contaminates fruit, but it also leaches into the soil and contaminates groundwater. However, there is little data on the effective removal of pirimicarb from orchard wastewater. The main purpose of this study is to create a novel family of functionalized imidazolium-based ionic liquids (ILs) using a simple chemical process, which will be utilized for the first time to extract pirimicarb from orchard wastewater in an efficient, cost-effective, and environmentally acceptable manner. FTIR, SEM, XRD, TGA, BET, and 1H NMR spectroscopy were used to characterize the functionalized samples. The impact of the IL substituent on the separation capacity was studied. In addition, the extraction and separation of pirimicarb from orchard wastewater were investigated under a variety of conditions (time, concentration, and temperature) in order to better understand the adsorption behaviors of distinct ILs in an aqueous solution. The adsorption equilibrium was reached in 30 minutes, and the maximum removal of pirimicarb was achieved utilizing the synthesized [C2im][C3H6NH2]Br-, according to the data. The pseudo-first-order model and the Langmuir model both suit well with the adsorption mechanism of pirimicarb with very good adsorptive capacities. Thermodynamic analyses indicated spontaneous, endothermic, and entropy-driven adsorption processes. The synthesized imidazolium-based ILs have good regeneration capability and recycling at least for six adsorption-desorption runs and have also been used to successfully detect pirimicarb orchard wastewater samples. The superior safety of the proposed method nominates it as a promising future strategy for pollution prevention. Consequently, this work has proven that the pirimicarb adsorption to various imidazolium-based ILs was dependent on the structures of the produced imidazolium-based ILs, which specifies its potential for practical applications in water pollutant removal and environmental remediation.

Ionic liquids for the passive sampling of sulfonamides from water-applicability and selectivity study

Ionic liquids (ILs) are new-generation, non-volatile solvents which are designable, and their structure may be specifically adjusted to the current application needs. Therefore, it is possible to create and apply ILs which efficiently and selectively extract various analytes from different matrices. It has already been examined that ILs may be applied as receiving phases in passive sampling for the long-term water monitoring of PAHs and pharmaceuticals in water. In this paper, the concept of passive sampling with ILs (PASSIL applied as receiving phases) was continued and developed using phosphonium-, imidazolium-, and morpholinium-cation-based ILs. The target group of analytes was pharmaceuticals which represent one of the most common categories of water contaminants. Fourteen-day-long extractions using various ILs were performed in stirred conditions at a constant temperature (20 °C). The best extraction efficiency was achieved for trihexyl(tetradecyl)phosphonium dicyanamide ([P666-14][N(CN)₂]). For this preliminary calibration, the sampling rates were calculated for each sulfonamide. Once again, selectivity was observed in passive sampling using [P666-14][N(CN)₂]. Therefore, PASSIL is seen as a very promising method for pharmaceutical monitoring in water.

Polycyclic aromatic hydrocarbons as model solutes for carbon nanomaterials in ionic liquids

The aim of this work is to understand the details of the interactions of ionic liquids with carbon nanomaterials (graphene and nanotubes) using polyaromatic compounds as model solutes.

Application of the PASSIL technique for the passive sampling of exemplary polar contaminants (pharmaceuticals and phenolic derivatives) from water

Ionic liquids (ILs) are one of the very promising media for the passive sampling of organic contaminants in water. These compounds offer a wide range of interactions with various analytes and give possibilities to control analyte properties by altering their structures, but most of all, possess a high polarity independent of the water solubility. Recently, some ILs were successfully applied as the receiving phase in the passive sampling of polyaromatic hydrocarbons, and this approach was acronymized to PASSIL. In this paper, we aimed to verify the applicability of the PASSIL technique for the selective extraction and enrichment of polar and semi-polar compounds from aqueous environments. The test kit of analytes comprised selected pharmaceuticals and phenol-type compounds, while the applied ILs were alkylimidazolium- and alkylphosphonium entities with a variety of anions. The 14-day-long experiments were performed in static and semi-static no-renewal systems. The kinetics of the uptake process, the analyte extraction efficiency and the sampling rates for all analytes were determined. One of the tested ionic liquids [P666-14][N(CN)2] presented very promising properties both as a stable medium between polyethersulfone (PES) membranes as well as a highly effective extraction phase. The uptake kinetics of the analytes and the determined sampling rates confirm the better and faster efficiency of PASSIL extraction when compared to commercially available passive samplers. Additionally, some selectivity was observed during analyte extraction, which results from the specific interaction between the IL and analytes, but not from the lipophilicity or ionization state of the analytes. These very promising findings make the PASSIL approach a very promising and competitive analytical tool for the extraction of environmental contaminants over a wide polarity range.