Improvement of bisphenol A quantitation from urine by LCMS

Association of Endocrine Disrupting Chemicals With the Metabolic Syndrome Among Women in the Multiethnic Cohort Study

Metabolic syndrome (MetS) is associated with a high risk of cardiovascular disease, a leading cause of death among women. MetS is a diagnosis of at least 3 of the following: high blood pressure, high fasting glucose, high triglycerides, high waist circumference, and low high-density lipoprotein cholesterol. Epidemiological studies suggest that endocrine disrupting chemical (EDC) exposure is positively associated with individual components of MetS, but evidence of an association between EDCs and MetS remains inconsistent. In a cross-sectional analysis within the Multiethnic Cohort Study, we evaluated the association between 4 classes of urinary EDCs (bisphenol A [BPA], triclosan, parabens, and phthalates) and MetS among 1728 women. Multivariable logistic regression was used to estimate odds ratios and 95% CI for the association between tertiles of each EDC and MetS adjusting for age, body mass index (BMI), racial and ethnic group, and breast cancer status. Stratified analyses by race and ethnicity and BMI were conducted. MetS was identified in 519 (30.0%) women. We did not detect statistically significant associations of MetS with BPA, triclosan, or phthalate metabolite excretion. MetS was inversely associated with total parabens (Ptrend = .002). Although there were suggestive inverse associations between EDCs and MetS among Latino and African American women, and women with BMI < 30 kg/m2, there was no statistically significant heterogeneity in associations by race and ethnicity or BMI. These findings suggest an inverse association between parabens and MetS in larger multiethnic studies. Prospective analyses to investigate suggested differences in associations by race, ethnicity, and BMI are warranted.

The bisphenol S contamination level observed in human follicular fluid affects the development of porcine oocytes

Bisphenol S (BPS), the main replacement for bisphenol A (BPA), is thought to be toxic, but limited information is available on the effects of Bisphenol S on ovarian follicles. In our study, we demonstrated the presence of Bisphenol S in the follicular fluid of women at a concentration of 22.4 nM. The effect of such concentrations of Bisphenol S on oocyte maturation and subsequent embryo development is still unknown. Therefore, we focused on the effect of Bisphenol S on in vitro oocyte maturation, fertilization, and embryo development. As a model, we used porcine oocytes, which show many physiological similarities to human oocytes. Oocytes were exposed to Bisphenol S concentrations similar to those detected in female patients in the ART clinic. We found a decreased ability of oocytes to successfully complete meiotic maturation. Mature oocytes showed an increased frequency of meiotic spindle abnormalities and chromosome misalignment. Alarming associations of oocyte Bisphenol S exposure with the occurrence of aneuploidy and changes in the distribution of mitochondria and mitochondrial proteins were demonstrated for the first time. However, the number and quality of blastocysts derived from oocytes that successfully completed meiotic maturation under the influence of Bisphenol S was not affected.

Influence of mobile phase composition on the analytical sensitivity of LC-ESI-MS/MS for the concurrent analysis of bisphenols, parabens, chlorophenols, benzophenones, and alkylphenols

Phenols are significant environmental endocrine disruptors that can have adverse health effects on exposed individuals. Correlating phenol exposure to potential health implications requires the development of a comprehensive and sensitive analytical method capable of analyzing multiple phenols in a single sample preparation and analytical run. Currently, no such method is available for multiple classes of phenols due to electrospray ionization (ESI) limitations in concurrent ionization and lack of sensitivity to certain phenols, particularly alkylphenols. In this study, we investigated the influence of mobile phase compositions in ESI on concurrent ionization and analytical sensitivity of liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) during the analysis of multiple classes of phenols, and we propose a comprehensive and sensitive analytical method for various classes of phenols (i.e., bisphenols, parabens, benzophenones, chlorophenols, and alkylphenols). The proposed method was affected by 0.5 mM ammonium fluoride under methanol conditions. It enabled the concurrent ionization of all the phenols and significantly improved the analytical sensitivity for bisphenols and alkylphenols, which typically have poor ionization efficiency. This method, combined with a "dilute and shoot" approach, allowed us to simultaneously quantify 38 phenols with good chromatographic behavior and sensitivity. Furthermore, the method was successfully applied to the analysis of 61 urine samples collected from aquatic (swimming) and land (indoor volleyball and outdoor football) athletes.

Risk of breast cancer and prediagnostic urinary excretion of bisphenol A, triclosan and parabens: The Multiethnic Cohort Study

Exposure to bisphenol A (BPA), triclosan and parabens is widespread but their impact on breast cancer risk remains unclear. This nested case-control study investigated endocrine-disrupting chemicals (EDCs) and breast cancer risk within the Multiethnic Cohort (MEC). We measured prediagnostic urinary BPA, triclosan and parabens in 1032 postmenopausal women with breast cancer (48 African American, 77 Latino, 155 Native Hawaiian, 478 Japanese American and 274 White) and 1030 individually matched controls, using a sensitive and validated liquid chromatography mass spectrometry assay. Conditional logistic regression was used to examine risk with these EDCs with adjustment for creatinine and potential confounders. In all women, breast cancer risk was not associated with BPA (Ptrend  = 0.53) and was inversely associated with triclosan (ORT3 vs T1  = 0.83, 95% CI: 0.66-1.04, Ptrend  = 0.045) and total parabens (ORT3 vs T1  = 0.77, 95% CI: 0.62-0.97, Ptrend  = 0.03). While risk of hormone receptor positive (HR+) cancer was 20% to 23% lower among women in the upper two tertiles of paraben exposure (Ptrend  = 0.02), risk of HR negative (HR-) was reduced 27% but only among those in the upper tertile of exposure. Although risk associations did not differ significantly by ethnicity or by body mass index (BMI), the inverse association with triclosan was observed mainly among overweight/obese women (ORT3 vs T1  = 0.76, 95% CI: 0.56-1.02, Ptrend  = 0.02). In summary, breast cancer risk in a multiethnic population was unrelated to BPA and was weakly inversely associated with triclosan and paraben exposures. Studies with multiple urine samples collected before breast cancer diagnosis are needed to further investigate these EDCs and breast cancer risk.

A new LC/MS method for specific determination of human systemic exposure to bisphenol A, F and S through their metabolites: Application to cord blood samples

Due to restriction of the use of BPA, several structural analogues such as BPS and BPF have been proposed for its replacement in many consumer products. This has increased the prevalence of BPS and BPF in urine from tested cohorts. However, these substitutes have similar endocrine disrupting properties to BPA, particularly on reproductive and metabolic functions, which suggests that fetal exposure to these analogues could be of concern for human health. Bisphenols (BPs) are mainly metabolized to glucuronides (BP-Gs), which are considered as inactive but provide a relevant marker of fetal exposure during pregnancy. In most instances, these metabolites are indirectly quantified after hydrolysis and measurement of the corresponding native BPs, which may lead to bias due to spurious BPs contamination during blood collection and/or analyses. We have developed a new method for direct quantification of BP-Gs, which has the advantage of not being affected by errors related to the presence of BPs. First, BP-Gs were extracted from plasma by anion exchange solid phase extraction. They were then labelled with dansyl chloride, using experimentally-optimized incubation conditions, after which the dansyl derivatives were injected into an on-line SPE-UHPLC/MS/MS system. The performance of the method, in terms of sensitivity, precision and accuracy, was evaluated in plasma over a concentration range of 0.05-5 ng/mL. The intra- and inter-day CV% precision were lower than 20% with accuracies ranging from 93% to 115%. The limit of quantification was set at 0.05 ng/mL. The method was then applied to measure BP-Gs in forty-four cord plasma samples. Although no BPF-G was found, BPA-G and BPS-G was determined in almost half of the cord plasma samples with concentration ranges nd-0.089 ng/mL and nd-0.586 ng/mL, respectively.

Exposure of bisphenol A in breast cancer patients-quantitatively assessed by sensitivity-enhanced high-performance liquid chromatography coupled with fluorescence detection: A case-control study

A simple, reproducible and sensitive liquid chromatography (HPLC) method has been developed and validated for estimation of bisphenol A (BPA) in human urine. A simple liquid-liquid extraction technique was used in BPA sample preparation. The analyte was chromatographed on a Shimadzu Prominence HPLC system using isocratic mobile phase conditions at a flow rate of 0.500 ml/min and a Hypersil Gold C₁₈ column maintained at 40°C. Quantification was performed on a fluorescence detector set at excitation 275 nm, emission 313 nm and bisphenol B was used as internal standard. The total run time was 8 min. The method was found to have acceptable sensitivity, selectivity, accuracy (98.82-103.64%), precision (1.17-5.36) and stability in the validation experiment carried out as per the USFDA guidelines. The method sensitivity was as low as 0.50 ng/ml. The applicability of the validated analytical method was established in human patient urine samples. The mean human urine BPA concentrations were 1.18 ± 2.11 ng/ml in the control group and 5.76 ± 6.00 ng/ml in the patient group (P < 0.001). Therefore, this method could be considered as an alternative for routine bio-monitoring of BPA which is less expensive and feasible in resource-poor settings.

Analysis of glyphosate, aminomethylphosphonic acid, and glufosinate from human urine by HRAM LC-MS

Aminomethylphosphonic acid (AMPA) is the main metabolite of glyphosate (GLYP) and phosphonic acids in detergents. GLYP is a synthetic herbicide frequently used worldwide alone or together with its analog glufosinate (GLUF). The general public can be exposed to these potentially harmful chemicals; thus, sensitive methods to monitor them in humans are urgently required to evaluate health risks. We attempted to simultaneously detect GLYP, AMPA, and GLUF in human urine by high-resolution accurate-mass liquid chromatography mass spectrometry (HRAM LC-MS) before and after derivatization with 9-fluorenylmethoxycarbonyl chloride (Fmoc-Cl) or 1-methylimidazole-sulfonyl chloride (ImS-Cl) with several urine pre-treatment and solid phase extraction (SPE) steps. Fmoc-Cl derivatization achieved the best combination of method sensitivity (limit of detection; LOD) and accuracy for all compounds compared to underivatized urine or ImS-Cl-derivatized urine. Before derivatization, the best steps for GLYP involved 0.4 mM ethylenediaminetetraacetic acid (EDTA) pre-treatment followed by SPE pre-cleanup (LOD 37 pg/mL), for AMPA involved no EDTA pre-treatment and no SPE pre-cleanup (LOD 20 pg/mL) or 0.2-0.4 mM EDTA pre-treatment with no SPE pre-cleanup (LOD 19-21 pg/mL), and for GLUF involved 0.4 mM EDTA pre-treatment and no SPE pre-cleanup (LOD 7 pg/mL). However, for these methods, accuracy was sufficient only for AMPA (101-105%), while being modest for GLYP (61%) and GLUF (63%). Different EDTA and SPE treatments prior to Fmoc-Cl derivatization resulted in high sensitivity for all analytes but satisfactory accuracy only for AMPA. Thus, we conclude that our HRAM LC-MS method is suited for urinary AMPA analysis in cross-sectional studies.

Development and validation of a liquid chromatography/tandem mass spectrometry method to quantify metabolites of phthalates, including di-2-ethylhexyl terephthalate (DEHTP) and bisphenol A, in human urine

RATIONALE

Several phthalates and bisphenol A are endocrine-disrupting chemicals (EDCs). Recently, their use has been partially restricted and less toxic compounds, such as di-2-ethylhexyl terephthalate (DEHTP), have been placed on the market. The aim of this work was to develop and validate a method for the simultaneous quantitation of bisphenol A and urinary metabolites of phthalates, including DEHTP.

METHODS

An isotopic dilution high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI-MS/MS) method for the determination of bisphenol A (BPA), monobenzyl phthalate (MBzP), mono-2-ethyl-5-carboxypentyl phthalate (MECPP), mono-2-ethyl-5-carboxypentyl terephthalate (MECPTP), mono-2-ethyl-5-hydroxyhexyl terephthalate (MEHHTP), monoethyl phthalate (MEP), and mono-n/i-butyl phthalates (MnBP/MiBP) in human urine was developed. A complete validation was carried out and the method was applied to 36 non-occupationally exposed adults.

RESULTS

Limits of quantitation ranged from 0.02 (MECPP) to 1 μg/L (MnBP and MiBP). Relative standard deviations below 10% indicated a suitable precision; accuracy, evaluated using a standard reference material, ranged from 74.3% to 117.5%; isotopically labelled internal standards were suitable for correcting the matrix effect. The accuracy was confirmed by the successful participation in an external verification exercise. However, for terephthalates, the validation was incomplete due to the lack of reference materials and external verification. Levels of the investigated chemicals in subjects were in line with those previously reported.

CONCLUSIONS

An LC/MS/MS assay for the simultaneous measurement of BPA and phthalate metabolites in human urine was developed and validated; it is useful to investigate exposure in epidemiological studies involving the general population.

Carbene-based Difluoromethylation of Bisphenols: Application to the Instantaneous Tagging of Bisphenol A in Spiked Soil for Its Detection and Identification by Electron Ionization Gas Chromatography-Mass Spectrometry

The rapid and efficient difluoromethylation of a panel of eleven bisphenols (BPs) for their enhanced detection and identification by Electron-Ionization Gas Chromatography-Mass Spectrometry (EI-GC-MS) is presented. The derivatization employs the inexpensive, environmentally benign agent diethyl (bromodifluoromethyl) phosphonate (DBDFP) as a difluorocarbene-generating species that converts the BPs into bis-difluoromethylated ethers that can be detected and identified by GC-MS means. Key attributes of the protocol include its extreme rapidity (30 seconds) at ambient temperature, high specificity for BPs amidst other alcohol-containing analytes, and its biphasic nature that allows for its convenient adaptation to the analysis of BPs in organic as well as aqueous matrices. The protocol furnishes stable, novel BP ethers armed with a total of four fluorine atoms for their subsequent analysis by EI-GC-MS. Furthermore, each derivatized bisphenol exhibits unique retention times vastly different from their native counterparts leading to their unequivocal identification. The effectiveness and robustness of the developed methodology was applied to the tagging of the most famous member of this family of compounds, bisphenol-A (BPA), when spiked (at 1 μg.g⁻¹ concentration) in the physically and compositionally complex Nebraska EPA standard soil. The method detection limit (MDL) for the bis-difluoromethylated BPA was determined to be 0.01 μg.mL⁻¹. The bis-difluoromethylated BPA was conveniently detected on the organic layers from the biphasic, derivatized mixtures, highlighting the protocol’s practicality and utility in the rapid, qualitative detection of this endocrine disruptor during environmental analysis.

Sustainable Synthesis and Characterization of Bisphenol A-Free Polycarbonate from Six-Membered Dicyclic Carbonate

Bisphenol A, (2,2-bis(4-hydroxyphenyl)propane, BPA)-free polycarbonate (PC) from six-membered di-cyclic carbonate, di-trimethylolpropane di-cyclic carbonate (DTMPC) was developed as a new type of PC by ring opening homo-polymerization. The polymerization was controlled by using metal-free organic-based catalyst systems. The results indicated that the conversion rate depends on the basicity of the catalyst in the order of 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), 4-dimethylaminopyridine (DMAP), triethylamine (TEA) from high to low. Over 99% conversion of DTMPC was obtained at 130°C within 15 min by TBD, DBU and DMAP. The resulting PC as a homo-polymer showed high optical transparency and hardness, low swelling property in organic solvents, and thermally stable at temperatures as high as 200 °C. High cell viability as the cyto-compatibility of C3H 10T1/2 cells seeded directly on the surface of PC films was obtained. This implied that PC is a viable material for biomedical and consumer products applications where safety is an important consideration.

Three-Dimensional Printing of Bisphenol A-Free Polycarbonates

Polycarbonates are widely used in food packages, drink bottles, and various healthcare products such as dental sealants and tooth coatings. However, bisphenol A (BPA) and phosgene used in the production of commercial polycarbonates pose major concerns to public health safety. Here, we report a green pathway to prepare BPA-free polycarbonates (BFPs) by thermal ring-opening polymerization and photopolymerization. Polycarbonates prepared from two cyclic carbonates in different mole ratios demonstrated tunable mechanical stiffness, excellent thermal stability, and high optical transparency. Three-dimensional (3D) printing of the new BFPs was demonstrated using a two-photon laser direct writing system and a rapid 3D optical projection printer to produce structures possessing complex high-resolution geometries. Seeded C3H10T1/2 cells also showed over 95% viability with potential applications in biological studies. By combining biocompatible BFPs with 3D printing, novel safe and high-performance biomedical devices and healthcare products could be developed with broad long-term benefits to society.

Ultrasensitive Bisphenol A Field-Effect Transistor Sensor Using an Aptamer-Modified Multichannel Carbon Nanofiber Transducer

Bisphenol A (BPA) is a known endocrine-disrupting compound (EDC) that has a structure similar to that of the hormone estrogen. Even low concentrations of BPA are able to bind estrogen receptors, thereby inducing severe diseases such as reproductive disorders, chronic diseases, and various types of cancer. Despite such serious effects, the use of BPA remains widespread. Therefore, monitoring of both dietary and nondietary exposure to BPA is important for human healthcare. Herein, we present a field-effect transistor (FET) sensor using aptamer-modified multichannel carbon nanofibers (MCNFs) to detect BPA. The MCNFs are fabricated via single-nozzle electrospinning of two immiscible polymer solutions followed by thermal treatment in an inert atmosphere. The MCNFs are then oxidized using a solution of HNO3 and H2SO4 to introduce carboxyl groups on the surface of the fibers. The carboxyl-functionalized MCNFs (CMCNFs) are immobilized on an amine-functionalized electrode substrate by forming a covalent bond, and amine-functionalized BPA-binding aptamers are modified in the same manner on the CMCNFs. The resulting FET sensors exhibit a high sensitivity, as well as specificity toward BPA at an unprecedentedly low concentration of 1 fM. Furthermore, these sensors are stable and could be reused for repeated assays.