Flowing atmospheric pressure afterglow combined with laser ablation for direct analysis of compounds separated by thin-layer chromatography

Automated LA-DBD-TLC-MS device for accurate detection of biogenic amines in fishery products coupled with machine learning algorithms

A novel, compact, and automated laser ablation dielectric barrier discharge thin layer chromatography-mass spectrometry (LA-DBD-TLC-MS) device was developed for the rapid detection of biogenic amines (BAs) in fishery products. This plug-and-play system integrates thermal desorption via diode laser, DBD plasma ionization, and tandem MS detection, with key operational parameters optimized through experimental and computational methods. Utilizing nanoscale carbon black as a matrix, the device achieved a detection limit of 0.230 pg/mm2. It demonstrated comparable efficacy to HPLC-MS/MS in screening six BAs and enabled species discrimination and spoilage assessment in fish with machine learning algorithms (PCA, RF, SVM, MLP), yielding high accuracies. A multi-linear regression model predicted salmon spoilage with a strong correlation (R2 = 0.974). This study confirms the LA-DBD-TLC-MS device as a reliable, precise, and high throughput tool for rapid BA analysis in fishery products, with potential for direct trace analysis of organic compounds in food matrices.

Postionization Mass Spectrometry Imaging: Past, Present, and Future

Mass spectrometry imaging (MSI) technologies are widely used today to study the in situ spatial distributions for a variety of analytes. As these technologies advance, the pursuit of higher resolution in MSI has intensified. The limitation of direct desorption/ionization is its insufficient ionization, posing a constraint on the advancement of high-resolution MSI technologies. The introduction of postionization process compensates the low ionization efficiency caused by sacrificing the desorption area while pursuing high spatial resolution, resolving the conflict between high spatial resolution and high sensitivity in direct desorption/ionization method. Here, we discuss the sampling and ionization steps of MSI separately, and review the postionization methods in MSI according to three different sampling modes: laser sampling, probe sampling, and ion beam sampling. Postionization technology excels in enhancing ionization efficiency, boosting sensitivity, mitigating discrimination effect, simplifying sample preparation, and expanding the scope of applicability. These advantages position postionization technology as a promising tool for biomedical sciences, materials sciences, forensic analysis and other fields.

Effect of Sample Plates and Sample Matrix on the Quantification Capabilities of Surface-Assisted Flowing Atmospheric-Pressure Afterglow Mass Spectrometry (SA-FAPA-MS)

Ambient desorption/ionization mass spectrometry (ADI-MS) has been broadly applied to accomplish direct analysis without sample preparation or separation. However, quantification capabilities and analytical performance are sometimes limited. Here, we report signal enhancement effects and improved quantification capabilities in plasma-based ADI-MS, when a flowing atmospheric-pressure afterglow (FAPA) source is used to probe analytes on tailored thin-layer chromatography (TLC) plates. It was found that quantitative results could be achieved when the TLC plate merely served as a sampling plate without a preceding separation step. Specifically, the dynamic response of caffeine, nicotine, acetaminophen, and progesterone was investigated with FAPA-MS on a variety of different TLC surfaces (normal-phase silica, reversed-phase-modified silica, cyano [CN]-modified silica, and dimethyl [RP2]-modified silica). All analytes were studied as single-analyte standards and in a multianalyte mixture to evaluate the effect of sample plates and sample matrix on analytical performance and competitive ionization processes. Overall, dimethyl (RP2)- and CN-modified silica resulted in superior performance compared to other TLC materials. After careful optimization and without the use of internal standards, linear ranges of five orders of magnitude were accessible for caffeine and nicotine. Limits of detection down to femtomole amounts of analyte were achieved. Quantitation limits using RP2-TLC and FAPA-MS were 0.062, 0.062l, 0.31, and 14 pmol for caffeine, nicotine, progesterone, and acetaminophen, respectively. Interestingly, the presence of nicotine at relatively high amounts reduced the signal of the other analytes, an observation that was found to correlate with the differences in the enthalpy of vaporization (ΔHvap) and proton affinity. To prove the quantitative capabilities, nicotine quantification in a real matrix-heavy e-liquid sample was demonstrated using an isotopically labeled standard. The use of TLC-based surfaces with FAPA-MS can aid in the direct and quantitative mass spectrometric investigation of complex mixtures.

Development of mass spectrometry imaging techniques and its latest applications

Mass spectrometry imaging (MSI) is a novel molecular imaging technology that collects molecular information from the surface of samples in situ. The spatial distribution and relative content of various compounds can be visualized simultaneously with high spatial resolution. The prominent advantages of MSI promote the active development of ionization technology and its broader applications in diverse fields. This article first gives a brief introduction to the vital parts of the processes during MSI. On this basis, provides a comprehensive overview of the most relevant MS-based imaging techniques from their mechanisms, pros and cons, and applications. In addition, a critical issue in MSI, matrix effects is also discussed. Then, the representative applications of MSI in biological, forensic, and environmental fields in the past 5 years have been summarized, with a focus on various types of analytes (e.g., proteins, lipids, polymers, etc.) Finally, the challenges and further perspectives of MSI are proposed and concluded.

[Advances in thin layer chromatography coupled with mass spectrometry technology]

Thin layer chromatography (TLC) is a very useful liquid chromatography approach. The simple device, convenient operation, versatility, high throughput capabilities, low cost, and simple sample pretreatments make it widely employed in various fields. In recent years, TLC-MS has become one of the most prominent trends for this technology as developments of modern analytical technology and comprehensive application of different approaches. With the development and upgrading of medicine, food, and scientific instrument industries, it is believed that TLC-MS technology should play a better role and obtain an opportunity for development. This study reviewed TLC-MS interface technologies (most of which are in recent 10 years) based on more than 150 studies and classified these TLC-MS technologies as three strategies. The first is indirect coupling using commercially available interface instruments. The second is TLC-in-site detection directly with special MS ion source devices like fast-atom-bombardment desorption ionization, matrix-assisted laser desorption ionization, surface-assisted laser desorption ionization, electrospray-assisted laser desorption ionization, laser-induced acoustic desorption/electrospray ionization, electrostatic-spray ionization, easy ambient sonic-spray ionization, desorption sonic spray ionization, ionization using "desorption/ionization resource", ionization using "molecular ionization-desorption analysis source", multiwavelength laser desorption ionization, ionization using flowing afterglow-atmospheric pressure glow discharge, ionization low-temperature plasma probe, desorption/ionization induced using neutral clusters, ionization using inductively coupled plasma and so on. These MS analyses are performed after TLC development, thus, the relative position of the chromatographic bands on TLCs is invariable, and this analysis can be regarded as static detection, though flexible travel stages or conveyor belts can be introduced to move TLC plates. The third strategy is to monitor TLC run using MS in real-time just as the monitor employed in HPLC, in which the chromatographic bands are still moving. This strategy is generally run on forced-flow TLC techniques and is less examined. The typical coupling technologies (especially appeared in recent ten years) are summarized and briefly described in this study. TLC-MS has greatly enhanced the research efficiency of bioactive substances for food and drugs due to the widespread usage of TLC-bioautography technology. Nowadays, the main bottleneck in the development of TLC-MS is the design and commercialization of "plug and play" components. The high-throughput and real-time monitoring TLC-MS technology with flexible scanning functions is also expected. Furthermore, the comparative studies of different kinds of desorbing-ionizing technologies are also application problems for further discussion.

Plasma-based ambient mass spectrometry: Recent progress and applications

Ambient mass spectrometry (AMS) has grown as a group of advanced analytical techniques that allow for the direct sampling and ionization of the analytes in different statuses from their native environment without or with minimum sample pretreatments. As a significant category of AMS, plasma-based AMS has gained a lot of attention due to its features that allow rapid, real-time, high-throughput, in vivo, and in situ analysis in various fields, including bioanalysis, pharmaceuticals, forensics, food safety, and mass spectrometry imaging. Tens of new methods have been developed since the introduction of the first plasma-based AMS technique direct analysis in real-time. This review first provides a comprehensive overview of the established plasma-based AMS techniques from their ion source configurations, mechanisms, and developments. Then, the progress of the representative applications in various scientific fields in the past 4 years (January 2017 to January 2021) has been summarized. Finally, we discuss the current challenges and propose the future directions of plasma-based AMS from our perspective.

Quantitative detection of caffeine in beverages using flowing atmospheric-pressure afterglow (FAPA) ionization high-resolution mass spectrometry imaging and performance evaluation of different thin-layer chromatography plates as sample substrates

Ambient desorption/ionization mass spectrometry (ADI-MS) is widely used as a rapid screening tool of samples in their native state without sample preparation. While analysis times are much less than 1 min per sample, one challenge of ADI-MS is the possibility to perform quantitative analysis of analytes in complex matrices. Typically, the goal is to probe a variety of different analytes in a complex matrix from a solid, liquid, or otherwise uncharacterized surface in the open air in front of the MS inlet. In this study, it is demonstrated that a carefully selected surface for analyte spot sampling and co-deposited isotopically labeled standards both significantly improve the capabilities of flowing atmospheric-pressure afterglow (FAPA) high-resolution (HR) MS for direct quantitative analysis. Specifically, a systematic study of different surfaces (glass, steel mesh, high-performance thin-layer chromatography (HPTLC) stationary phases including silica, reversed-phase (RP)-modified silica, and cyano (CN)-modified silica) and their suitability for spot sampling with FAPA-MS was performed. A set of different caffeine-containing standards and beverages (Red Bull, Coca-Cola, coffee, and black tea) was deposited on the surfaces and direct FAPA-HR-MS analysis of caffeine was performed using internal calibration with co-deposited ¹³C₃-caffeine. For TLC surfaces, it was demonstrated that quantitative results could be achieved with the matrix and concomitants present and that a preceding chromatographic separation was not mandatory for this application. In addition, the use of a CN-HPTLC surface resulted in a significantly more intense caffeine signal in the beverage samples compared to the other surfaces studied, with the highest increase compared to the silica (200-fold higher) and the lowest increase compared to the steel mesh (30-fold higher). The utilization of TLC-based surfaces as sample carriers is considered an attractive tool in the ADI-MS toolbox for fast and efficient mass spectrometric investigations of complex samples without time-consuming sample preparation.

Pulsed Blue Laser Diode Thermal Desorption Microplasma Imaging Mass Spectrometry

An ambient air laser desorption, plasma ionization imaging method is developed and presented using a microsecond pulsed laser diode for desorption and a flexible microtube plasma for ionization of the neutral desorbate. Inherent parameters such as the laser repetition rate and pulse width are optimized to the imaging application. For the desorption substrate, copper spots on a copper-glass sandwich structure are used. This novel design enables imaging without ablating the metal into the mass spectrometer. On this substrate, fixed calibration markers are used to decrease the positioning error in the imaging process, featuring a 3D offset correction within the experiment. The image is both screened spot-by-spot and per line scanning at a constant speed, which allows direct comparison. In spot-by-spot scanning, a novel algorithm is presented to unfold and to reconstruct the imaging data. This approach significantly decreases the time required for the imaging process, which allows imaging even at decreased sampling rates and thus higher mass resolution. After the experiment, the raw data is automatically converted and interpreted by a second algorithm, which allows direct visualization of the image from the data, even on low-intensity signals. Mouse liver microtome cuts have been screened for dehydrated cholesterol, proving good agreement of the unfolded data with the morphology of the tissue. The method optically resolves 30 μm, with 30 μm diameter copper spots and a 10 μm gap. No conventional chemical matrices or vacuum conditions are required.

Recent Advances in Combinations of TLC With MALDI and Other Desorption/Ionization Mass-Spectrometry Techniques

The combination of planar chromatography with desorption/ionization mass-spectrometry (MS) techniques provides chemists with unique tools for fast and simple separation of mixtures followed by the detection of analytes by the most powerful analytical method. Since its introduction in the early 1990s, thin-layer chromatography (TLC)/matrix-assisted mass spectrometry (MALDI) has been used for the analysis of a wide range of analytes, including natural and synthetic organic compounds. Nowadays, new desorption/ionization approaches have been developed and applied in conjunction with planar chromatography competing with MALDI. This review covers recent developments in the combination of TLC with various desorption/ionization MS methods which were made in recent several years.

Characterization of natural herbal medicines by thin-layer chromatography combined with laser ablation-assisted direct analysis in real-time mass spectrometry

The characterization and quality control of natural herbal medicines, such as traditional Chinese medicines (TCMs), is of great significance to ensure their potential efficacy and avoid severe side effects. Thin-layer chromatography (TLC) is a simple and classic approach for examining quality marker of natural products. Nevertheless, it is more difficult to further characterize the compounds adsorbed on the TLC plate. Herein, we reported a simple setup of laser ablation-assisted direct analysis in real-time mass spectrometry (LA-DART-MS), in which the coupling of mass spectrometry information to provide a predominant dimension in the identification of unknown chemical compositions separated on standard TLC plates, and it was applied for rapid characterization of various kinds of natural herbal medicines. The results showed that the introduction of low-cost small laser pointer had significantly improved the desorption process. The system was successfully applied in the analysis of alkaloids, flavonoids, anthraquinones, volatile oils, glycosides, organic acids, and eight different TCMs including Sophorae Flavescentis Radix, Angelicae Sinensis Radix, Acori Tatarinowii Rhizoma, Phellodendri Chinensis Cortex, Picrasmae Ramulus et Folium, Gynura Japonica, Rhei Radix et Rhizoma and Dendrobii Caulis. The obtained limits of detection (LODs) of this method for various types of reference substances were in the range of 4.6-162.2 ng/band on TLC plates. Furthermore, the quality control and identification of different species of Dendrobii Caulis herb was achieved. This study combines the advantages of TLC and ambient mass spectrometry to provide a good choice for the screening and identification of active ingredients and the quality evaluation of botanical samples.

LASER DESORPTION/ABLATION POSTIONIZATION MASS SPECTROMETRY: RECENT PROGRESS IN BIOANALYTICAL APPLICATIONS

Lasers have long been used in the field of mass spectrometric analysis for characterization of condensed matter. However, emission of neutrals upon laser irradiation surpasses the number of ions. Typically, only one in about one million analytes ejected by laser desorption/ablation is ionized, which has fueled the quest for postionization methods enabling ionization of desorbed neutrals to enhance mass spectrometric detection schemes. The development of postionization techniques can be an endeavor that integrates multiple disciplines involving photon energy transfer, electrochemistry, gas discharge, etc. The combination of lasers of different parameters and diverse ion sources has made laser desorption/ablation postionization (LD/API) a growing and lively research community, including two-step laser mass spectrometry, laser ablation atmospheric pressure photoionization mass spectrometry, and those coupled to ambient mass spectrometry. These hyphenated techniques have shown potentials in bioanalytical applications, with major inroads to be made in simultaneous location and quantification of pharmaceuticals, toxins, and metabolites in complex biomatrixes. This review is intended to provide a timely comprehensive view of the broadening bioanalytical applications of disparate LD/API techniques. We also have attempted to discuss these applications according to the classifications based on the postionization methods and to encapsulate the latest achievements in the field of LD/API by highlighting some of the very best reports in the 21st century. © 2020 John Wiley & Sons Ltd.

Low-Temperature Plasma Probe Mass Spectrometry for Analytes Separated on Thin-Layer Chromatography Plates: Direct vs Laser Assisted Desorption

Thin-layer chromatography (TLC) is a widespread technique because it allows fast, simple, and inexpensive analyte separations. In addition, direct analysis of the compounds separated on TLC plates via mass spectrometry (MS) has been shown to provide high sensitivity and selectivity while avoiding time-consuming sample extraction protocols. Here, direct desorption low-temperature plasma-mass spectrometry (LTP-MS) as well as diode laser assisted desorption (LD) LTP-MS are studied for direct spatially resolved analysis of compounds from TLC plates. Qualitative and quantitative characterization of amino acids, pharmaceuticals, and structural isomers were performed. The nature of the TLC plate stationary phase was found to have a significant influence, together with the analyte's characteristics, on the desorption efficiency. Tandem MS is shown to greatly improve the limits of detection (LODs). Direct desorption LTP-MS, without external thermal assisted desorption, demonstrates its best performance with cellulose TLC plates (LODs, 0.01 ng/mm² to 2.55 ng/mm²) and restricted performance with normal-phase (NP) TLC plates (several analytes without observable signal). LD LTP-MS, with systematic optimization of irradiance and focal point diameter, is shown to overcome the direct-desorption limitations and reach significantly improved LODs with NP TLC plates (up to ×1000 better). In addition, a wide-ranging characterization of amino acid analytical figures of merit with LD LTP-MS shows that LODs from 84 pg/mm² down to 0.3 pg/mm² are achieved on NP TLC plates.

MINIATURIZATION IN MASS SPECTROMETRY

Expectations for continuous miniaturization in mass spectrometry are not declining for years. Portable instruments are highly welcome by the industry, science, space agencies, forensic laboratories, and many other units. All are striving for the small, cheap, and as good as possible instruments. This review describes the recent developments of miniature mass spectrometers and also provides selected applications where these devices are used. Upcoming perspectives of further development are also discussed. @ 2019 John Wiley & Sons Ltd. Mass Spec Rev.

Mass spectrometry imaging of thin-layer chromatography plates using laser desorption/low-temperature plasma ionisation

An open development kit for ambient ionisation enables the fast scanning and visualisation of TLC plates with high lateral resolution.

Application of Molecularly Imprinted Polymers (MIP) and Magnetic Molecularly Imprinted Polymers (mag-MIP) to Selective Analysis of Quercetin in Flowing Atmospheric-Pressure Afterglow Mass Spectrometry (FAPA-MS) and in Electrospray Ionization Mass Spectrometry (ESI-MS)

Molecularly imprinted polymer (MIP) and magnetic molecularly imprinted polymer (mag-MIP) for solid extraction and pre-concentration of quercetin have been successfully prepared by thermal polymerization method using quercetin (Q) as a template, acrylamide (AA) as a functional monomer, and ethylene glycol dimethacrylate (EGDMA) as a cross-linking agent. The MIP and mag-MIP were successfully applied in analysis of quercetin by mass spectrometry (MS) methods. To perform ambient plasma ionization experiments, a setup consisting of the heated crucible, a flowing atmospheric-pressure afterglow (FAPA) plasma ion source, and amaZon SL ion trap (Bruker, Bremen, Germany) was used. The heated crucible with programmable temperature allowed desorption of the analytes from MIPs structure which resulted in their direct introduction into the ion stream. The results of Q-MIP/Q-mag-MIP and FAPA-MS measurements were compared with those of the analysis of quercetin by the ESI-MS method without extractions and pre-concentration of analytes on polymers. Limits of detection (LOD) for quercetin solutions in both positive and negative ESI-MS were established at 10⁻⁸ M and 10⁻⁷ M, respectively. The linearity (R² = 0.9999) of the proposed analytical procedure for quercetin determination in positive ions was provided in the range between 10⁻⁴ M and 10⁻⁷ M. Moreover, the same parameters were established for FAPA-MS in positive ions, reaching LOD at 0.005 mg/gMIP and the linearity of the method in the range of 0.015–0.075 mg/gMIP with the correlation coefficient value R² = 0.9850.

Molecularly imprinted polymers as selective adsorbents for ambient plasma mass spectrometry

The application of molecularly imprinted polymers (MIPs) as molecular scavengers for ambient plasma ionization mass spectrometry has been reported for the first time. MIPs were synthesized using methacrylic acid as functional monomer; nicotine, propyphenazone, or methylparaben as templates; ethylene glycol dimethacrylate as a cross-linker; and 2,2′-azobisisobutyronitrile as polymerization initiator. To perform ambient plasma ionization experiments, a setup consisting of the heated crucible, a flowing atmospheric-pressure afterglow (FAPA) plasma ion source, and a quadrupole ion trap mass spectrometer has been used. The heated crucible with programmable temperature allows for desorption of the analytes from MIPs structure which results in their direct introduction into the ion stream. Limits of detection, linearity of the proposed analytical procedure, and selectivities have been determined for three analytes: nicotine, propyphenazone, and methylparaben. The analytes used were chosen from various classes of organic compounds to show the feasibility of the analytical procedure. The limits of detections (LODs) were 10 nM, 10, and 0.5 μM for nicotine, propyphenazone, and methylparaben, respectively. In comparison with the measurements performed for the non-imprinted polymers, the values of LODs were improved for at least one order of magnitude due to preconcentration of the sample and reduction of background noise, contributing to signal suppression. The described procedure has shown linearity in a broad range of concentrations. The overall time of single analysis is short and requires ca. 5 min. The developed technique was applied for the determination of nicotine, propyphenazone, and methylparaben in spiked real-life samples, with recovery of 94.6–98.4%. The proposed method is rapid, sensitive, and accurate which provides a new option for the detection of small organic compounds in various samples.

Graphical abstract