Label-free and sensitive aptasensor based on dendritic gold nanostructures on functionalized SBA-15 for determination of chloramphenicol

A reusable screen-printed carbon electrode-based aptasensor for the determination of chloramphenicol in food and environment samples

An electrochemical aptasensor was developed for the determination of chloramphenicol (CAP) in fresh foods and food products. The aptasensor was developed using Prussian blue (PB) and chitosan (CS) film. PB acts as a redox probe for detection and CS acts as a sorption material. The aptamer (Apt) was immobilized on a screen-printed carbon electrode (SPCE) modified with gold nanoparticles (AuNPs). Under optimum conditions, the linearity of the aptasensor was between 1.0 and 6.0 × 106 ng L-1 with a detection limit of 0.65 and a quantification limit of 2.15 ng L-1. The electrode could be regenerated up to 24 times without the use of chemicals. The aptasensor showed good repeatability (RSD <11.2%) and good reproducibility (RSD <7.7%). The proposed method successfully quantified CAP in milk, shrimp pond water and shrimp meat with good accuracy (recovery = 88.0 ± 0.6% to 100 ± 2%). The proposed aptasensor could be especially useful in agriculture to ensure the quality of food and the environment and could be used to determine other antibiotics.

Electrochemical Biosensors for Whole Blood Analysis: Recent Progress, Challenges, and Future Perspectives

Whole blood, as one of the most significant biological fluids, provides critical information for health management and disease monitoring. Over the past 10 years, advances in nanotechnology, microfluidics, and biomarker research have spurred the development of powerful miniaturized diagnostic systems for whole blood testing toward the goal of disease monitoring and treatment. Among the techniques employed for whole-blood diagnostics, electrochemical biosensors, as known to be rapid, sensitive, capable of miniaturization, reagentless and washing free, become a class of emerging technology to achieve the target detection specifically and directly in complex media, e.g., whole blood or even in the living body. Here we are aiming to provide a comprehensive review to summarize advances over the past decade in the development of electrochemical sensors for whole blood analysis. Further, we address the remaining challenges and opportunities to integrate electrochemical sensing platforms.

Methylene Blue functionalized carbon nanodots combined with different shape gold nanostructures for sensitive and selective SARS-CoV-2 sensing

The development of DNA-sensing platforms based on new synthetized Methylene Blue functionalized carbon nanodots combined with different shape gold nanostructures (AuNs), as a new pathway to develop a selective and sensitive methodology for SARS-CoV-2 detection is presented. A mixture of gold nanoparticles and gold nanotriangles have been synthetized to modify disposable electrodes that act as an enhanced nanostructured electrochemical surface for DNA probe immobilization. On the other hand, modified carbon nanodots prepared a la carte to contain Methylene Blue (MB-CDs) are used as electrochemical indicators of the hybridization event. These MB-CDs, due to their structure, are able to interact differently with double and single-stranded DNA molecules. Based on this strategy, target sequences of the SARS-CoV-2 virus have been detected in a straightforward way and rapidly with a detection limit of 2.00 aM. Moreover, this platform allows the detection of the SARS-CoV-2 sequence in the presence of other viruses, and also a single nucleotide polymorphism (SNPs). The developed approach has been tested directly on RNA obtained from nasopharyngeal samples from COVID-19 patients, avoiding any amplification process. The results agree well with those obtained by RT-qPCR or reverse transcription quantitative polymerase chain reaction technique.

Phytic acid determination in food products using the extract of rice sprout and SBA@DABCO nanoparticle-modified filter paper as a novel electrochemical biosensor

We outline the fabrication of a highly sensitive biosensor for phytic acid (PA) determination using the extract of rice sprout and SBA@DABCO nanoparticles. The nanoparticles were first added to the surface of small paper disks. After drying, the extract of rice sprout in phosphate buffered saline was immobilized on the paper disks. FT-IR spectroscopy, XRD, and SEM were employed for the characterization of the nanoparticles. The assembly process of the modified paper disks on top of graphite screen-printed electrodes was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. PA measurements were performed by differential pulse voltammetry (DPV) with a small amount of sample (7 μL) for analysis. The cooperation of the rice sprout extract and the nanostructure of this biosensor led to the selective and sensitive electrochemical determination of PA. The limit of detection (S/N = 3) and linear dynamic range for PA determination by DPV were obtained at 0.04 μM and 0.1-10.0 μM, respectively. The biosensor showed excellent sensitivity for the determination of PA in real samples such as biscuits and wheat flour.

Amplification-free detection of SARS-CoV-2 using gold nanotriangles functionalized with oligonucleotides

Gold nanotriangles (AuNTs) functionalized with dithiolated oligonucleotides have been employed to develop an amplification-free electrochemical biosensor for SARS-CoV-2 in patient samples. Gold nanotriangles, prepared through a seed-mediated growth method and exhaustively characterized by different techniques, serve as an improved electrochemical platform and for DNA probe immobilization. Azure A is used as an electrochemical indicator of the hybridization event. The biosensor detects either single stranded DNA or RNA sequences of SARS-CoV-2 of different lengths, with a low detection limit of 22.2 fM. In addition, it allows to detect point mutations in SARS-CoV-2 genome with the aim to detect more infective SARS-CoV-2 variants such as Alpha, Beta, Gamma, Delta, and Omicron. Results obtained with the biosensor in nasopharyngeal swab samples from COVID-19 patients show the possibility to clearly discriminate between non-infected and infected patient samples as well as patient samples with different viral load. Furthermore, the results correlate well with those obtained by the gold standard technique RT-qPCR, with the advantage of avoiding the amplification process and the need of sophisticated equipment.

Fabrication of AuNPs/MWCNTS/Chitosan Nanocomposite for the Electrochemical Aptasensing of Cadmium in Water

Cadmium (Cd²⁺) is one of the most toxic heavy metals causing serious health problems; thus, designing accurate analytical methods for monitoring such pollutants is highly urgent. Herein, we report a label-free electrochemical aptasensor for cadmium detection in water. For this, a nanocomposite combining the advantages of gold nanoparticles (AuNPs), carbon nanotubes (CNTs) and chitosan (Cs) was constructed and used as immobilization support for the cadmium aptamer. First, the surface of a glassy carbon electrode (GCE) was modified with CNTs-CS. Then, AuNPs were deposited on CNTs-CS/GCE using chrono-amperometry. Finally, the immobilization of the amino-modified Cd-aptamer was achieved via glutaraldehyde cross-linking. The different synthesis steps of the AuNPs/CNTs/CS nano assembly were characterized by cyclic voltammetry (CV). Electrochemical impedance spectroscopy (EIS) was employed for cadmium determination. The proposed biosensor exhibited excellent performances for cadmium detection at a low applied potential (−0.5 V) with a high sensitivity (1.2 KΩ·M⁻¹), a detection limit of 0.02 pM and a wide linear range (10⁻¹³–10⁻⁴ M). Moreover, the aptasensor showed a good selectivity against the interfering ions: Pb²⁺; Hg²⁺ and Zn²⁺. Our electrochemical biosensor provides a simple and sensitive approach for Cd²⁺ detection in aqueous solutions, with promising applications in the monitoring of trace amounts of heavy metals in real samples.

The Application of Nanomaterials for the Electrochemical Detection of Antibiotics: A Review

Antibiotics can accumulate through food metabolism in the human body which may have a significant effect on human safety and health. It is therefore highly beneficial to establish easy and sensitive approaches for rapid assessment of antibiotic amounts. In the development of next-generation biosensors, nanomaterials (NMs) with outstanding thermal, mechanical, optical, and electrical properties have been identified as one of the most hopeful materials for opening new gates. This study discusses the latest developments in the identification of antibiotics by nanomaterial-constructed biosensors. The construction of biosensors for electrochemical signal-transducing mechanisms has been utilized in various types of nanomaterials, including quantum dots (QDs), metal-organic frameworks (MOFs), magnetic nanoparticles (NPs), metal nanomaterials, and carbon nanomaterials. To provide an outline for future study directions, the existing problems and future opportunities in this area are also included. The current review, therefore, summarizes an in-depth assessment of the nanostructured electrochemical sensing method for residues of antibiotics in different systems.

Multimodal/Multifunctional Nanomaterials in (Bio)electrochemistry: Now and in the Coming Decade

Multifunctional nanomaterials, defined as those able to achieve a combined effect or more than one function through their multiple functionalization or combination with other materials, are gaining increasing attention in the last years in many relevant fields, including cargo targeted delivery, tissue engineering, in vitro and/or in vivo diseases imaging and therapy, as well as in the development of electrochemical (bio)sensors and (bio)sensing strategies with improved performance. This review article aims to provide an updated overview of the important advances and future opportunities exhibited by electrochemical biosensing in connection to multifunctional nanomaterials. Accordingly, representative aspects of recent approaches involving metal, carbon, and silica-based multifunctional nanomaterials are selected and critically discussed, as they are the most widely used multifunctional nanomaterials imparting unique capabilities in (bio)electroanalysis. A brief overview of the main remaining challenges and future perspectives in the field is also provided.

Sensitive Electrochemical Detection of Tryptophan Using a Hemin/G-Quadruplex Aptasensor

In this study, we design an electrochemical aptasensor with an enzyme-free amplification method to detect tryptophan (Trp). For the amplified electrochemical signal, the screen-printed electrode was modified with dendritic gold nanostructures (DGNs)/magnetic double-charged diazoniabicyclo [2.2.2] octane dichloride silica hybrid (Fe3O4@SiO2/DABCO) to increase the surface area as well as electrical conductivity, and the hemin/G-quadruplex aptamer was immobilized. The presence of Trp improved the catalytic characteristic of hemin/G-quadruplex structure, which resulted in the efficient catalysis of the H2O2 reduction. As the concentration of Trp increased, the intensity of H2O2 reduction signal increased, and Trp was measured in the range of 0.007–200 nM with a detection limit of 0.002 nM. Compared with previous models, our sensor displayed higher detection sensitivity and specificity for Trp. Furthermore, we demonstrated that the proposed aptasensor successfully determined Trp in human serum samples, thereby proving its practical applicability.

Advances in Exosome Analysis Methods with an Emphasis on Electrochemistry

Exosomes, small extracellular vesicles, are released by various cell types. They are found in bodily fluids, including blood, urine, serum, and saliva, and play essential roles in intercellular communication. Exosomes contain various biomarkers, such as nucleic acids and proteins, that reflect the status of their parent cells. Since they influence tumorigenesis and metastasis in cancer patients, exosomes are excellent noninvasive potential indicators for early cancer detection. Aptamers with specific binding properties have distinct advantages over antibodies, making them effective versatile bioreceptors for the detection of exosome biomarkers. Here, we review various aptamer-based exosome detection approaches based on signaling methods, such as fluorescence, colorimetry, and chemiluminescence, focusing on electrochemical strategies that are easier, cost-effective, and more sensitive than others. Further, we discuss the clinical applications of electrochemical exosome analysis strategies as well as future research directions in this field.

Construction of an Electrochemical Receptor Sensor Based on Graphene/Thionine for the Sensitive Determination of β-Lactam Antibiotics Content in Milk

In antibiotics, β-lactam is one kind of major concern acknowledged as an unavoidable contaminant in milk. Thus, a facile and sensitive method is essential for rapid β-lactam antibiotics detection. In our work, a specific electrochemical receptor sensor based on the graphene/thionine (GO/TH) composite was established. The mechanism of the electrochemical receptor sensor was a direct competitive inhibition of the binding of horseradish peroxidase-labeled ampicillin (HRP-AMP) to the mutant BlaR-CTD protein by free β-lactam antibiotics. Then, horseradish peroxidase (HRP) catalyzed the hydrolysis of the substrate hydrogen peroxide (H₂O₂), which produced an electrochemical signal. Under optimal experimental conditions, this method could quantitatively detect cefquinome from 0.1 to 8 μg L⁻¹ and with the limit of detection (LOD) of 0.16 μg L⁻¹, much lower than the maximum residue limit (MRL) of 5 μg L⁻¹ set by the European Union. In addition, the LOD of spiked milk samples with cefalexin, cefquinoxime, cefotafur, penicillin G and ampicillin were 14.88 μg L⁻¹, 2.46 μg L⁻¹, 17.16 μg L⁻¹, 0.06 μg L⁻¹, 0.21 μg L⁻¹ and the limits of quantitation (LOQ) were 36.09 μg L⁻¹, 5.40 μg L⁻¹, 41.45 μg L⁻¹, 0.13 μg L⁻¹, 0.42 μg L⁻¹, respectively. The sensor showed a favorable recovery of 84.89–102.44%. Moreover, the electrochemical receptor sensor was successfully applied to assay β-lactam antibiotics in milk, which showed good correlation with the results obtained from liquid chromatography-tandem mass spectrometry (LC-MS/MS).

Development of a DNA biosensor based on MCM41 modified screen-printed graphite electrode for the study of the short sequence of the p53 tumor suppressor gene in hybridization and its interaction with the flutamide drug using hemin as the electrochemical label

Electrochemical DNA biosensors are particularly attractive because of their high sensitivity, suitability and compatibility with miniaturization in nucleic acid technology.

The development of an electrochemical nanoaptasensor to sensing chloramphenicol using a nanocomposite consisting of graphene oxide functionalized with (3-Aminopropyl) triethoxysilane and silver nanoparticles

In the present research, a nanoaptasensor is proposed for electrochemical measurement of chloramphenicol (CAP). To this purpose, the nanocomposite prepared from graphene oxide and functionalized with (3-Aminopropyl) triethoxysilane/silver nanoparticles to the abbreviated AgNPs/[NH₂-Si]-f-GO, was utilized to modify the glassy carbon electrode (GCE). Furthermore, the modified electrode was also investigated using the electrochemical methods such as electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The AgNPs/[NH₂-Si]-f-GO nanocomposite was investigated by UV-Vis spectrophotometry. Fourier transform infrared (FT-IR) spectrometry and transmission electron microscopy (TEM). Moreover, [Fe(CN)₆]^3-/4 solution in the role of an electrochemical probe was applied. The AgNPs/[NH₂-Si]-f-GO nanocomposite was confirmed as a good layer to covalent immobilization of aptamer (Apt) onto the GCE surface. In this sense, the DPV was used as a sensitive electrochemical technique for the measurement of CAP with an appropriate linear concentration range which was found to be between 10 pM and 0.2 μM and, with a low limit of detection, it equaled 3.3 pM. CAP which was identified in the presence of other usual antibiotics existed in the real samples.

Construction of Electrochemical Immunosensor Based on Gold-Nanoparticles/Carbon Nanotubes/Chitosan for Sensitive Determination of T-2 Toxin in Feed and Swine Meat

T-2 toxin (T-2) is one of major concern mycotoxins acknowledged as an unavoidable contaminant in human foods, animal feeds and also agriculture products. Thus, a facile and sensitive method is essential for accurate T-2 toxin detection. In our work, a specific electrochemical immunosensor based on gold nanoparticles/carboxylic group-functionalized single-walled carbon nanotubes/chitosan (AuNPs/cSWNTs/CS) composite was established. The mechanism of the electrochemical immunosensor was an indirect competitive binding to a given amount of anti-T-2 between free T-2 and T-2-bovine serum albumin, which was conjugated on covalently functionalized cSWNTs decorated on the glass carbon electrode. Afterwards, the alkaline phosphatase labeled anti-mouse secondary antibody was bound to the electrode surface by reacting with the primary antibody. Lastly, alkaline phosphatase catalyzed the hydrolysis of the substrate α-naphthyl phosphate, which produced an electrochemical signal. Compared with conventional methods, the established immunosensor was more sensitive and simpler. Under optimal conditions, this method could quantitatively detect T-2 from 0.01 to 100 μg·L-1 with a detection limit of 0.13 μg·L-1 and favorable recovery 91.42⁻102.49%. Moreover, the immunosensor was successfully applied to assay T-2 in feed and swine meat, which showed good correlation with the results obtained from liquid chromatography-tandem mass spectrometry (LC-MS/MS).

Ultrasensitive and reusable electrochemical aptasensor for detection of tryptophan using of [Fe(bpy)3](p-CH3C6H4SO2)2 as an electroactive indicator

In this paper, we report the application of a reusable electrochemical aptasensor for detection of tryptophan by using [Fe(bpy)₃](p-CH₃C₆H₄SO₂)₂ as an electroactive indicator and based on the target-compelled aptamer displacement. The aptasensor fabricated by self-assembling the thiolated probe on the surface of graphite screen-printed electrode modified with gold nanoparticles/multiwalled carbon nanotubes and chitosan nanocomposite (AuNPs/MWCNTs-Chit/SPE). Afterward, Trp aptamer (Apt) immobilized on the modified electrode surface through hybridization. In the absence of Trp, a sharp peak of [Fe(bpy)₃](p-CH₃C₆H₄ SO₂)₂ can be observed in differential pulse voltammetry (DPV) study. The introduction of Trp led to the formation of aptamer-Trp complex and dissociation of the aptamer from the DNA-Apt duplex on the electrode surface into the solution and decreases the peak current intensity of electroactive indicator. This is because, [Fe(bpy)₃](p-CH₃C₆H₄SO₂)₂ tends to bind to the two strands DNA. Therefore, the peak current of [Fe(bpy)₃](p-CH₃C₆H₄ SO₂)₂ linearly decreased with increasing the concentration of Trp over a range of 3.0 nM- 100 μM. The detection limit (3 σ) was 1.0 nM. In addition, we examined the selectivity of the constructed biosensor for tyrosine, histidine, arginine, lysine, valine and methionine that belonged to the amino acid family. The obtained results showed that the fabricated sensor had a good selectivity for Trp against the other examined amino acids. Also, the potential applicability of the aptasensor was investigated by detecting the Trp in a complex media such as human blood plasma spiked with Trp.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.

Aptamer-Based Biosensors for Antibiotic Detection: A Review

Antibiotic resistance and, accordingly, their pollution because of uncontrolled usage has emerged as a serious problem in recent years. Hence, there is an increased demand to develop robust, easy, and sensitive methods for rapid evaluation of antibiotics and their residues. Among different analytical methods, the aptamer-based biosensors (aptasensors) have attracted considerable attention because of good selectivity, specificity, and sensitivity. This review gives an overview about recently-developed aptasensors for antibiotic detection. The use of various aptamer assays to determine different groups of antibiotics, like β-lactams, aminoglycosides, anthracyclines, chloramphenicol, (fluoro)quinolones, lincosamide, tetracyclines, and sulfonamides are presented in this paper.

Label-free electrochemical immunosensor for ultrasensitive detection of neuron-specific enolase based on enzyme-free catalytic amplification

Enzyme-free catalytic amplification is of great significance for sensitive label-free electrochemical immunosensors. In this study, an enzyme-free catalytic amplification based label-free amperometric immunosensor was developed for sensitive detection of neuron-specific enolase (NSE) by use of a AuPd nanoparticle-multiwalled carbon nanotube (AuPd-MWCNT) composite, ferrocenecarboxaldehyde (Fc-CHO), and chitosan hybrid hydrogel. The intrinsic virtues of chitosan not only resulted in bioactivity of the attached antibodies and made the other component of the immunosensor easier to fix on the electrode, but also imparted abundant binding sites to the hydrogel to condense Fc-CHO to achieve the initial signal amplification. Fc-CHO, which served as an electroactive species to generate a redox response, also exhibits excellent electrocatalytic activity toward H₂O₂. AuPd-MWCNT composite, with enhanced peroxidase-like catalytic activity, could catalyze H₂O₂ to accelerate electron transfer. When H₂O₂ was present in the detection solution, synergetic catalysis of Fc-CHO and AuPd-MWCNT composite toward H₂O₂ was achieved, thus realizing enzyme-free signal amplification. On the basis of this enzyme-free signal amplification, the electrochemical immunosensing platform provided a wide linear range from 1 pg mL^-1 to 100 ng mL^-1, a low detection limit of 0.483 pg mL^-1, and high sensitivity of 7.22 μA (log₁₀ C _NSE)^-1. Moreover, the immunosensor showed enormous potential in clinical application. Graphical abstract An enzyme-free catalytic amplification based label-free amperometric immunosensor was developed for sensitive detection of neuron-specific enolase (NSE) by use of a AuPd nanoparticle-multiwalled carbon nanotube (MWCNT) composite, ferrocenecarboxaldehyde (Fc-CHO), and chitosan (CS) hybrid hydrogel. BSA bovine serum albumin, GA glutaraldehyde, SWV square wave voltammetry.

Construction of a highly sensitive signal-on aptasensor based on gold nanoparticles/functionalized silica nanoparticles for selective detection of tryptophan

In this work, a highly sensitive, low-cost, and label-free aptasensor based on signal-on mechanisms of response was developed by immobilizing the aptamer on gold nanoparticles (AuNPs)/amine-functionalized silica nanoparticle (FSN)/screen-printed electrode (SPE) surface for highly selective electrochemical detection of tryptophan (Trp). The hemin (Hem), which interacted with the guanine bases of the aptamer, worked as a redox indicator to generate a readable electrochemical signal. The changes in the charge transfer resistance have been monitored using the voltammetry and electrochemical impedance spectroscopic (EIS) techniques. The peak current of Hem linearly increased with increasing concentration of Trp, in differential pulse voltammetry, from 0.06 to 250 nM with a detection limit of 0.026 nM. Also, the results obtained from EIS studies showed that the Trp was detected sensitively with the fabricated aptasensor in the range of 0.06-250 nM. The detection limit is 0.01 nM, much lower than that obtained by most of the reported electrochemical methods. The usage of aptamer as a recognition layer led to a sensor with high affinity for Trp, compared with control amino acids of tyrosine, histidine, arginine, lysine, valine, and methionine. The usability of the aptasensor was successfully evaluated by the determination of Trp in a human blood serum sample. Thus, the sensor could provide a promising plan for the construction of aptasensors. Graphical abstract Schematic outline the principle for tryptophan aptasensing.

Electrochemical aptasensors for contaminants detection in food and environment: Recent advances

The growing number of contaminants requires the development of new analytical tools to meet the increasing demand for legislative actions on food safety and environmental pollution control. In this context, electrochemical aptamer-based sensors appear promising among all biosensors because they permit multiplexed analysis and provide fast response, sensitivity, specificity and low cost. The aim of this review is to give the readers an overview of recent important achievements in the development of electrochemical aptamer-based biosensors for contaminant detection over the last two years. Special emphasis is placed on aptasensors based on screen-printed electrodes which show a substantial improvement of analytical performances.