Electrogenerated chemiluminescence of tris(2,2'-bipyridine)ruthenium(II) using N-(3-aminopropyl)diethanolamine as coreactant

MoS2-Carbon Nanodots as a New Electrochemiluminescence Platform for Breast Cancer Biomarker Detection

In this work, we present the combination of two different types of nanomaterials, 2D molybdenum disulfide nanosheets (MoS₂-NS) and zero-dimensional carbon nanodots (CDs), for the development of a new electrochemiluminescence (ECL) platform for the early detection and quantification of the biomarker human epidermal growth factor receptor 2 (HER2), whose overexpression is associated with breast cancer. MoS₂-NS are used as an immobilization platform for the thiolated aptamer, which can recognize the HER2 epitope peptide with high affinity, and CDs act as coreactants of the anodic oxidation of the luminophore [Ru(bpy)₃]²⁺. The HER2 biomarker is detected by changes in the ECL signal of the [Ru(bpy)₃]²⁺/CD system, with a low detection limit of 1.84 fg/mL and a wide linear range. The proposed method has been successfully applied to detect the HER2 biomarker in human serum samples.

Highly Sensitive Detection of the Insecticide Azamethiphos by Tris(2,2'-bipyridine)ruthenium(II) Electrogenerated Chemiluminescence

Azamethiphos (AZA) is an insecticide and neurotoxic agent that causes the inhibition of acetylcholinesterase (AChE). AChE is a vital enzyme for neurotransmission because it metabolizes acetylcholine neurotransmitter at the synaptic cleft and terminates synaptic transmission. It is worth mentioning that organophosphates and carbamates inhibit AChE. These AChE inhibitors bind to the active site of the enzyme and inactivate it, leading to paralysis and death. Herein, for the first time, we develop a sensitive, low-cost, and rapid electrogenerated chemiluminescence (ECL) system for the detection of AZA. The designed ECL sensor was applied for the highly sensitive detection of AZA with a wide dynamic range (from 0.1 μM to 1000 μM) and low detection limit of 0.07 μM (S/N = 3). The practical utility of the sensor demonstrates high recoveries (96-102%) in real samples of lake water and wastewater.

Electrochemiluminescence of Ru(bpy)32+/thioacetamide and its application for the sensitive determination of hepatotoxic thioacetamide

Thioacetamide (TAA) is a well-known hepatotoxic substance, so it is important to determine its presence and content in food and environmental samples. Herein, we report a highly sensitive determination method for TAA based on the electrochemiluminescence (ECL) of tris(2,2'-bipyridyl)ruthenium(ii) (Ru(bpy)32+) for the first time by using TAA as a new coreactant for Ru(bpy)32+ ECL via an anodic route. The developed Ru(bpy)32+-TAA ECL system allows the determination of TAA with a good dynamic linear range and low limit of detection (LOD) of 0.1 μM to 1000 μM and 0.035 μM (3σ/m), respectively. In addition, the established ECL system can be applied to detect TAA in fruit juice and waste water samples with outstanding recoveries.

Aggregation-Induced Electrochemiluminescence of Conjugated Pdots Containing a Trace Ir(III) Complex: Insights into Structure-Property Relationships

An approach to the design of iridium(III)-contained polytetraphenylethene Pdots that could exhibit highly efficient electrochemiluminescence (ECL) was proposed. The relationships of ECL performance between the iridium complex-embedded and end-capped aggregation-induced emission (AIE) active Pdots in aqueous media were investigated for the first time. The iridium complexes with cyclometalated ligand 6-phenylphenanthridine (pphent) were incorporated into the copolymers by either embedding (P0, P2-P5) or end-capping (P1) into the backbone via an ancillary 2,2'-bipyridine (bpy) ligand. Subsequently, the corresponding Pdots of P0-P5 encapsulated with poly(styrene-co-maleicanhydride) could be obtained by the nanoprecipitation method. Compared to Pdots0, Pdots2-Pdots5 with (pphent)₂Ir(bpy) (M1) complex embedding, as the iridium complex content increases, ECL signals were decreased in the order of Pdots0 > Pdots2 > Pdots3 > Pdots4 > Pdots5; whereas among these Pdots of P0-P5, Pdots1 with M1 complex end-capping exhibited the highest ECL efficiency (relative to a Ru(bpy)₃²⁺ system of 18.9%) and 4.7-fold enhancement of the ECL signal compared to the parent Pdots of P0, which was mainly attributed to the good film conductivity of the completely conjugated architectures, thus prompting the intramolecular electron transfer. This work opened new avenues for designing highly efficient ECL emitters.

A mass-amplifying electrochemiluminescence film (MAEF) for the visual detection of dopamine in aqueous media

A bright and metal-free mass-amplifying electrochemiluminescence film (MAEF) performing in aqueous media was reported for the first time. Systematic studies demonstrated that the film substrates have a remarkable influence on the electrochemiluminescence (ECL) performance. Gold substrates promote ECL reactions and the subsequent radiative decay process simultaneously, affording an unconventional 507-fold ECL enhancement. Such a gold-enhanced MAEF is opposite to ECL systems previously reported, in which the use of gold electrodes normally results in decreased ECL intensity due to passivation of the gold surface by oxide formation. More importantly, the ECL intensity of the MAEF is linearly amplified through facilely regulating luminogen loading. Morphological analysis reveals that the film consists of grass-like nanowires with a diameter of 57 nm, which facilitate electrical communication between the luminogen, electrode, and supporting electrolyte, giving rise to the mass-amplifying ECL. The bright ECL of the solid film in aqueous media can be readily observed by the naked eye, entirely different from visible ECL systems reported in which ruthenium complexes dissolved/dispersed in solution are used as the luminogens. The film is further utilized to detect dopamine (DA), an important biomolecule related to nervous diseases, in aqueous media, with a low detection limit of 3.3 × 10-16 M. Furthermore, a facile method based on grayscale analysis of ECL images (GAEI) of the film was developed for visual and ultrasensitive DA detection in aqueous media.

A conceptual framework for the development of iridium(iii) complex-based electrogenerated chemiluminescence labels

Translation of the highly promising electrogenerated chemiluminescence (ECL) properties of Ir(iii) complexes (with tri-n-propylamine (TPrA) as a co-reactant) into a new generation of ECL labels for ligand binding assays necessitates the introduction of functionality suitable for bioconjugation. Modification of the ligands, however, can affect not only the photophysical and electrochemical properties of the complex, but also the reaction pathways available to generate light. Through a combined theoretical and experimental study, we reveal the limitations of conventional approaches to the design of electrochemiluminophores and introduce a new class of ECL label, [Ir(C^N)2(pt-TOxT-Sq)]+ (where C^N is a range of possible cyclometalating ligands, and pt-TOxT-Sq is a pyridyltriazole ligand with trioxatridecane chain and squarate amide ethyl ester), which outperformed commercial Ir(iii) complex labels in two commonly used assay formats. Predicted limits on the redox potentials and emission wavelengths of Ir(iii) complexes capable of generating ECL via the dominant pathway applicable in microbead supported ECL assays were experimentally verified by measuring the ECL intensities of the parent luminophores at different applied potentials, and comparing the ECL responses for the corresponding labels under assay conditions. This study provides a framework to tailor ECL labels for specific assay conditions and a fundamental understanding of the ECL pathways that will underpin exploration of new luminophores and co-reactants.

Single Cell Electrochemiluminescence Imaging: From the Proof-of-Concept to Disposable Device-Based Analysis

We report here the development of coreactant-based electrogenerated chemiluminescence (ECL) as a surface-confined microscopy to image single cells and their membrane proteins. Labeling the entire cell membrane allows one to demonstrate that, by contrast with fluorescence, ECL emission is only detected from fluorophores located in the immediate vicinity of the electrode surface (i.e., 1-2 μm). Then, to present the potential diagnostic applications of our approach, we selected carbon nanotubes (CNT)-based inkjet-printed disposable electrodes for the direct ECL imaging of a labeled plasma receptor overexpressed on tumor cells. The ECL fluorophore was linked to an antibody and enabled to localize the ECL generation on the cancer cell membrane in close proximity to the electrode surface. Such a result is intrinsically associated with the unique ECL mechanism and is rationalized by considering the limited lifetimes of the electrogenerated coreactant radicals. The electrochemical stimulus used for luminescence generation does not suffer from background signals, such as the typical autofluorescence of biological samples. The presented surface-confined ECL microscopy should find promising applications in ultrasensitive single cell imaging assays.