Covalent organic frameworks as a novel fiber coating for solid-phase microextraction of volatile benzene homologues

Recent Progress and Applications of Advanced Nanomaterials in Solid-Phase Extraction

Sample preparation maintains a key bottleneck in the whole analytical procedure. Solid-phase sorbents (SPSs) have garnered increasing attention in sample preparation research due to their crucial roles in achieving high clean-up and enrichment efficiency in the analysis of trace targets present in complex matrices. Novel nanoscale materials with improved characteristics have garnered considerable interest across different scientific disciplines due to the limited capabilities of traditional bulk-scale materials. The purpose of this review is to offer a thorough summary of the latest developments and uses of SPSs in preparing samples for chromatographic analysis, focusing on the years 2020-2024. The techniques for preparing SPSs are examined, such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), carbon nanoparticles (CNPs), molecularly imprinted polymers (MIPs), and metallic nanomaterials (MNs). Examining the pros and cons of different extraction methods, including solid-phase extraction (SPE), magnetic SPE (MSPE), flow-based SPE (FBA-SPE), solid-phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and dispersive SPE (DSPE), is the main focus. Furthermore, this article presents the utilization of SPE technology for isolating common contaminants in various environmental, biological, and food specimens. We highlight the persistent challenges in SPSs and anticipate future advancements and applications of novel SPSs.

Recent progress of covalent organic frameworks as attractive materials for solid-phase microextraction: A review

Solid-phase microextraction (SPME) is a green, environmentally friendly, and efficient technique for sample pre-treatment. Covalent organic frameworks (COFs), a class of porous materials formed by covalent bonds, have gained prominence owing to their remarkable attributes, including large specific surface area, tunable pore size, and robust thermal/chemical stability. These characteristics have made COFs highly appealing as potential coatings for SPME fiber over the past decades. In this review, various methods used to prepare SPME coatings based on COFs are presented. These methods encompass physical adhesion, sol-gel processes, in situ growth, and chemical cross-linking strategies. In addition, the applications of COF-based SPME coating fibers for the preconcentration of various targets in environmental, food, and biological samples are summarized. Moreover, not only their advantages but also the challenges they pose in practical applications are highlighted. By shedding light on these aspects, this review aims to contribute to the continued development and utilization of COF materials in the field of sample pretreatment.

Recent Advances in the Application of Covalent Organic Frameworks in Extraction: A Review

Covalent organic frameworks (COFs) are a class of emerging materials that are synthesized based on the covalent bonds between different building blocks. COFs possess unique attributes in terms of high porosity, tunable structure, ordered channels, easy modification, large surface area, and great physical and chemical stability. Due to these features, COFs have been extensively applied as adsorbents in various extraction modes. Enhanced extraction performance could be reached with modified COFs, where COFs are presented as composites with other materials including nanomaterials, carbon and its derivatives, silica, metal-organic frameworks, molecularly imprinted polymers, etc. This review article describes the recent advances, developments, and applications of COF-based materials being utilized as adsorbents in the extraction methods. The COFs, their properties, their synthesis approaches as well as their composite structures are reviewed. Most importantly, suggested mechanisms for the extraction of analyte(s) by COF-based materials are also discussed. Finally, the current challenges and future prospects of COF-based materials in extraction methods are summarized and considered in order to provide more insights into this field.

Electrospun Nanofiber-Based Membranes for Water Treatment

Water purification and water desalination via membrane technology are generally deemed as reliable supplementaries for abundant potable water. Electrospun nanofiber-based membranes (ENMs), benefitting from characteristics such as a higher specific surface area, higher porosity, lower thickness, and possession of attracted broad attention, has allowed it to evolve into a promising candidate rapidly. Here, great attention is placed on the current status of ENMs with two categories according to the roles of electrospun nanofiber layers: (i) nanofiber layer serving as a selective layer, (ii) nanofiber layer serving as supporting substrate. For the nanofiber layer's role as a selective layer, this work presents the structures and properties of conventional ENMs and mixed matrix ENMs. Fabricating parameters and adjusting approaches such as polymer and cosolvent, inorganic and organic incorporation and surface modification are demonstrated in detail. It is crucial to have a matched selective layer for nanofiber layers acting as a supporting layer. The various selective layers fabricated on the nanofiber layer are put forward in this paper. The fabrication approaches include inorganic deposition, polymer coating, and interfacial polymerization. Lastly, future perspectives and the main challenges in the field concerning the use of ENMs for water treatment are discussed. It is expected that the progress of ENMs will promote the prosperity and utilization of various industries such as water treatment, environmental protection, healthcare, and energy storage.

[Application of imine covalent organic frameworks in sample pretreatment]

Imine covalent organic frameworks (I-COFs), including imine-linked COFs and hydrazone-linked COFs, are a new type of crystalline porous organic materials constructed by the condensation of organic monomers by the Schiff-base reaction. Because they are composed of lightweight elements linked by strong covalent bonds, I-COF materials possess the advantages of low skeleton density, large surface area, high porosity, abundant monomer species, controllable pore size, functionalized structure, diverse synthetic methods, excellent adsorption performance, outstanding physical and chemical stabilities, etc. In recent years, interest in the field of I-COFs has increased tremendously because of their exceptional performance and broad applications in gas storage, gas separation, catalysis, sensing, photoelectric materials, sample pretreatment, drug delivery, and other fields. To date, imine bonds are one of the most widely used covalent bonds in COFs, and represent one of the most important ways to obtain I-COFs with excellent chemical stabilities. The synthesis methods for I-COFs include solvothermal synthesis, microwave synthesis, mechanochemical grinding synthesis, and room-temperature synthesis methods. Solvothermal synthesis is the most extensively used method for the production of I-COFs with high specific surface areas and good thermal stabilities. The microwave synthesis method is conducive to the rapid synthesis of COFs in industry, providing a more time-saving, simpler, and safer route for large-scale preparation of I-COFs. The mechanochemical grinding synthesis of porous solids has gained importance as an alternative to conventional solvothermal synthesis, because the process is quick, environment-friendly, and potentially scalable. The room-temperature method is characterized by mild reaction conditions and rapid reactions. It is an energy-saving, economic, safe, and green synthesis method, which has emerged as a hot spot in the preparation of I-COFs in recent years. Research progress over the past years on the application of I-COFs in the field of materials science has undoubtedly established the basis of its application in analytical chemistry. Owing to the excellent physical and chemical properties of I-COF materials, they are suitable for use as separation and enrichment media for trace target compounds in complex samples. The high specific surface area and porosity, extended conjugate network skeleton, and π-electron-rich nature of the materials endow it with a high adsorption capacity. These materials are highly enriched in target analytes by π-π interactions, acid-base interactions, donor-acceptor interactions, hydrogen bonding, hydrophobic interactions, and other intermolecular interactions. Precise control of the microporous structure of I-COFs was obtained by controlling the chain length, geometric structure, doping elements, and substituent groups of the organic monomers. Selective enrichment of target trace substances was achieved by modifying the groups of I-COFs based on the principle of host guest adaptation, molecular sieving, or microporous filling effect. At present, research on the synthesis of I-COF materials is in the stage of rapid development, and many I-COFs with excellent properties and great application potential have been synthesized, allowing widespread application of I-COFs in sample pretreatment medium. This review summarizes the current state-of-the-art on the main types and synthetic methods of I-COFs, as well as the applications of I-COFs in solid-phase extraction, magnetic solid-phase extraction, dispersive solid-phase extraction, and solid-phase microextraction. The prospects of I-COFs in sample pretreatment are also presented.

Self-assembly of core-shell structured multiwalled nanotubes@covalent organic frameworks composite for solid-phase extraction of four phytohormones from fruit juices

Covalent organic frameworks (COFs) have attracted considerable attention in sample pretreatment because of their unique characteristics. However, the submicron or micron size of COFs has restricted their wider applications in solid-phase extraction (SPE). Herein, multiwalled nanotubes (MWNTs) were used as substrate materials to synthesize core-shell structured MWNTs@COFs composites (MWNTs@SNW-1) using a simple self-assembly method. The as-prepared MWNTs@SNW-1 composite exhibited a high BET surface area, good thermal stability, and good adsorption capacity. The MWNTs@SNW-1 composite was used as an adsorbent in cartridge-based SPE to extract four phytohormones before determining their levels by high-performance liquid chromatography. The experimental parameters affecting extraction efficiency, including the amount of adsorbents, solution pH, ionic strength, eluent type, and eluent volume, were investigated. The developed method showed a wide linear range (0.37-100 ng mL^-1), low detection limits (0.11-0.32 ng mL^-1), low limits of quantification (0.37-1.07 ng mL^-1), high enrichment factors (45.9-49.3), and good reproducibility (<4.8%) for phytohormones. The developed analytical method was used to analyze trace phytohormones in fruit juices with good recoveries, highlighting the potential of the MWNTs@SNW-1 composite as an adsorbent in sample preparation.

High antibacterial activity of chitosan films with covalent organic frameworks immobilized silver nanoparticles

In this study, chitosan (CS) film containing covalent organic frameworks (COFs) immobilized silver nanoparticles (AgNPs) were developed for food packaging with improved antibacterial activities and film properties. COFs-AgNPs were fabricated via in-situ synthesis of immobilizing AgNPs on COFs. Transmission electron microscope, Zeta potential, X-ray diffraction, element mapping and Fourier transform infrared spectroscopy confirmed the successful fabrication of COFs-AgNPs, and COFs-AgNPs showed superior antibacterial activity against S. aureus and E. coli. Furthermore, the as-prepared COFs-AgNPs composite was further used to fabricate CS composite films (CS/COFs-AgNPs) by a solution casting method. The findings showed that the tensile strength of the nanocomposite films enhanced dramatically with the increase of the COFs-AgNPs content, while the UV-visible light barrier property, water swelling and solubility properties, and water vapor permeability (WVP) decreased significantly. Not only that, the CS/COFs-AgNPs nanocomposite films also showed outstanding antibacterial activity and effectively prolonged the storage time of white crucian carp (Carassius auratus). As a result, CS/COFs-AgNPs nanocomposite films show great potential in active food packaging.

Covalent organic frameworks as multifunctional materials for chemical detection

Sensitive and selective detection of chemical and biological analytes is critical in various scientific and technological fields. As an emerging class of multifunctional materials, covalent organic frameworks (COFs) with their unique properties of chemical modularity, large surface area, high stability, low density, and tunable pore sizes and functionalities, which together define their programmable properties, show promise in advancing chemical detection. This review demonstrates the recent progress in chemical detection where COFs constitute an integral component of the achieved function. This review highlights how the unique properties of COFs can be harnessed to develop different types of chemical detection systems based on the principles of chromism, luminescence, electrical transduction, chromatography, spectrometry, and others to achieve highly sensitive and selective detection of various analytes, ranging from gases, volatiles, ions, to biomolecules. The key parameters of detection performance for target analytes are summarized, compared, and analyzed from the perspective of the detection mechanism and structure-property-performance correlations of COFs. Conclusions summarize the current accomplishments and analyze the challenges and limitations that exist for chemical detection under different mechanisms. Perspectives on how future directions of research can advance the COF-based chemical detection through innovation in novel COF design and synthesis, progress in device fabrication, and exploration of novel modes of detection are also discussed.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

In situ room-temperature rapidly fabricated imine-linked covalent organic framework coated fibers for efficient solid-phase microextraction of pyrethroids

A facile and rapid strategy for preparation of covalent organic framework (COF) coated fibers at ambient temperature is urgently needed for solid-phase microextraction (SPME) technology. In this work, an in situ room-temperature rapid growth strategy was developed to high-efficiently fabricate imine-linked COF (TPB-DVA) coated fibers in as little as 30 min at room temperature, and the thickness of the coating reached 9 μm. The prepared TPB-DVA coated fiber offer high thermal and chemical stability, and outstanding service lifetime. Moreover, we generalize this strategy to other two imine-linked COF (TPB-DMTP and TFPB-TAPB) coated fibers and the fibers were fabricated at room temperature for 3 h and 12 h, respectively, which demonstrate the applicability of this strategy. Subsequently, a SPME-GC-MS/MS analytical method was developed for trace pyrethroids (PYs) detection, which exhibited high enhancement factors (EFs, 2700-13195), wide linear range (0.08-800 ng L^-1), low limits of detection (LODs, 0.02-0.20 ng L^-1), and good repeatability (RSD ≤ 8.5%, n = 6). Furthermore, the developed analytical method was applied to tea samples and trace PYs (1.31-4.32 ng L^-1) were found with satisfactory recovery (80.2-119.8%). The above results demonstrated that the feasibility of the developed strategy for the facile and rapid fabrication of imine-linked COF coated fibers.

[Recent advance of new sample preparation materials in the analysis and detection of environmental pollutants]

To successfully analyze complex samples and detect trace targets, sample pretreatment is essential. Efficient sample pretreatment techniques can remove or reduce interference from the sample matrix. It can also enrich analytes, thereby improving analytical accuracy and sensitivity. In recent years, various sample preparation techniques, including SPE, magnetic dispersion SPE, pipette tip SPE, stir bar extraction, fiber SPME, and in-tube SPME, have received increasing attention in environmental analysis and monitoring. The extraction efficiency mainly depends on the type of adsorbent material. Therefore, the development of efficient adsorbents is a crucial step toward sample preparation. This review summarizes and discusses the research advances in extraction materials over recent years. These extraction materials contain inorganic adsorbents, organic adsorbents, and inorganic-organic hybrid materials such as graphene, graphene oxide, carbon nanotubes, inorganic aerogels, organic aerogels, triazinyl-functionalized materials, triazine-based polymers, molecularly imprinted polymers, covalent organic frameworks, metal-organic frameworks, and their derivatives. These materials have been applied to extract different types of pollutants, including metal ions, polycyclic aromatic hydrocarbons, plasticizers, alkanes, phenols, chlorophenols, chlorobenzenes, polybrominated diphenyl ethers, perfluorosulfonic acids, perfluorocarboxylic acids, estrogens, drug residues, and pesticide residues, from environmental samples (such as water and soil samples). These sample preparation materials possess high surface areas, numerous adsorption sites, and allow extraction via various mechanisms, such as π-π, electrostatic, hydrophobic, and hydrophilic interactions, as well as hydrogen and halogen bond formation. Various sample pretreatment techniques based on these extraction materials have been combined with various detection methods, including chromatography, mass spectrometry, atomic absorption spectroscopy, fluorescence spectroscopy, and ion mobility spectroscopy, and have been extensively used for the determination of environmental pollutants. The existing challenges associated with the development of sample preparation techniques are proposed, and prospects for such extraction materials in environmental analysis and monitoring are discussed. Major trends in the field, including the development of efficient extraction materials with high enrichment ability, good selectivity, excellent thermal stability, and chemical stability, are discussed. Green sample pretreatment materials, environmentally friendly synthesis methods, and green sample pretreatment methods are also explored. Rapid sample pretreatment methods that can be conducted within minutes or seconds are of significant interest. Further, online sample pretreatment and automatic analysis methods have attracted increasing attention. Besides, real-time analysis and in situ detection have been important development directions, and are expected to be widely applicable in environmental analysis, biological detection, and other fields. Modern synthesis technology should be introduced to synthesize specific extraction materials. Controllable preparation methods for extraction materials, such as the in situ growth or in situ preparation of extraction coatings, will acquire importance in coming years. It will also be important to adopt high-performance materials from other fields for sample pretreatment. Organic-inorganic hybrid extraction materials can combine the advantages both organic materials and inorganic materials, and mutually compensate for any disadvantages. Extraction materials doped with nanomaterials are also promising. Although existing sample pretreatment techniques are relatively efficient, it is still imperative to develop novel sample preparation methods.

A solid-phase microextraction fiber coating based on magnetic covalent organic framework for highly efficient extraction of triclosan and methyltriclosan in environmental water and human urine samples

Herein, we synthesized a kind of magnetic covalent organic framework nanohybrids (NiFe₂O₄@COF), and integrated it with polydimethyl siloxane and silicone rubber curing agent for solid phase microextraction (SPME) fiber coating. The fiber coating demonstrated a porous and uniform surface with the BET specific surface of 169.7 m² g^-1. As for seven environmental analytes, the NiFe₂O₄@COF-based SPME fiber coating gave the higher extraction recoveries for triclosan (TCS) and methyltriclosn (MTCS) than those of fenpropathrin, bifenthrin, permethrin, fenvalerate and deltamethrin. Several operational parameters were rigorously optimized, such as extraction temperature, extraction time, thermal desorption time, solution pH and salt effect. Combined with the GC-ECD detection, the newly developed microextraction method supplied the wide linear range of 0.1-1000 µg L^-1 with the correlation coefficients of > 0.9995. The limits of detection (LODs) and limits of quantitation (LOQs) reached as low as 1-7 ng L^-1 and 3.3-23 ng L^-1, respectively. The intra-day and inter-day precisions in six replicates (n = 6 ) were < 3.55% and < 5.06%, respectively, and the fiber-to-fiber reproducibility (n = 3) was < 7.64%. To evaluate its feasibility in real samples, the fortified recoveries for TCS and MTCS, at low (0.2 µg L^-1), middle (2.0 µg L^-1) and high (20.0 µg L^-1) levels, varied between 81.9% and 119.1% in tap, river and barreled waters as well as male, female and children urine samples. Especially, it is worth mentioning that the NiFe₂O₄@COF-based SPME coating fiber can be recycled for at least 150 times with nearly unchanged extraction efficiency. Moreover, the extraction recoveries by the as-fabricated fiber coating were much higher than those by three commercial fibers (PDMS, PDMS/DVB and PDMS/DVB/CAR). Overall, the NiFe₂O₄@COF-based SPME is a convenient, sensitive, efficient and "green" pretreatment method, thereby possessing important application prospects in trace monitoring of TCS-like pollutants in complex liquid matrices.

Benzoxazine Porous Organic Polymer as an Efficient Solid-Phase Extraction Adsorbent for the Enrichment of Chlorophenols from Water and Honey Samples

Porous organic polymers have gained great research interest in the field of adsorption. A benzoxazine porous organic polymer (BoxPOP) constructed from p-phenylenediamine, 1,3,5-trihydroxybenzene and paraformaldehyde was fabricated and explored as an adsorbent for solid-phase extraction (SPE) of four chlorophenols from water and honey samples. Under the optimized SPE conditions, the response linearity for the analysis of the SPE extract of the chlorophenols by high performance liquid chromatography-diode array detector was observed in the range of 0.2-40.0 ng mL-1 for water samples and 5.0-400.0 ng g-1 for honey samples. The method detection limits of the analytes were 0.06-0.08 ng mL-1 for water samples and 1.5-2.0 ng g-1 for honey samples. The recoveries of the analytes from fortified water and honey samples ranged from 84.8 to 119.0% with the relative standard deviations below 8.4%. The results indicate that the prepared BoxPOP is an effective adsorbent for the chlorophenols. The established method provides an alternative approach for the determination of chlorophenols in real samples.

Covalent organic framework Schiff base network-1-based pipette tip solid phase extraction of sulfonamides from milk and honey

In this work, a covalent organic framework Schiff base network-1 (SNW-1), was synthesized based on the Schiff base reaction between terephthalaldehyde and melamine and characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and nitrogen adsorption-desorption isotherm analyses. The prepared SNW-1 was employed as pipette tip solid phase extraction adsorbent for the extraction of sulfonamides (SAs) prior to high performance liquid chromatography analysis. The parameters affecting the extraction efficiency, including the salt concentration, sample pH, amount of adsorbent, and types and volume of eluent were investigated in detail. Good linearities were obtained between the peak area and SAs concentration ranging from 5 to 500 ng mL^-1 with correlation coefficients (R²) higher than 0.9998. The limits of detection and RSDs were lower than 0.25 ng mL^-1 and 1.9 %, respectively. The developed method was further applied for the determination of SAs in milk and honey samples with recoveries in the range of 85.8 % - 118.0 % and RSDs less than 9.5 %. The results demonstrate that the SNW-1 shows great potential for the enrichment of trace SAs in complex matrices.

Covalent Organic Frameworks in Sample Preparation

Covalent organic frameworks (COFs) can be classified as emerging porous crystalline polymers with extremely high porosity and surface area size, and good thermal stability. These properties have awakened the interests of many areas, opening new horizons of research and applications. In the Analytical Chemistry field, COFs have found an important application in sample preparation approaches since their inherent properties clearly match, in a good number of cases, with the ideal characteristics of any extraction or clean-up sorbent. The review article is meant to provide a detailed overview of the different COFs that have been used up to now for sample preparation (i.e., solid-phase extraction in its most relevant operational modes-conventional, dispersive, magnetic/solid-phase microextraction and stir-bar sorptive extraction); the extraction devices/formats in which they have been applied; and their performances and suitability for this task.

Recent Applications and Newly Developed Strategies of Solid-Phase Microextraction in Contaminant Analysis: Through the Environment to Humans

The present review aims to describe the recent and most impactful applications in pollutant analysis using solid-phase microextraction (SPME) technology in environmental, food, and bio-clinical analysis. The covered papers were published in the last 5 years (2014–2019) thus providing the reader with information about the current state-of-the-art and the future potential directions of the research in pollutant monitoring using SPME. To this end, we revised the studies focused on the investigation of persistent organic pollutants (POPs), pesticides, and emerging pollutants (EPs) including personal care products (PPCPs), in different environmental, food, and bio-clinical matrices. We especially emphasized the role that SPME is having in contaminant surveys following the path that goes from the environment to humans passing through the food web. Besides, this review covers the last technological developments encompassing the use of novel extraction coatings (e.g., metal-organic frameworks, covalent organic frameworks, PDMS-overcoated fiber), geometries (e.g., Arrow-SPME, multiple monolithic fiber-SPME), approaches (e.g., vacuum and cold fiber SPME), and on-site devices. The applications of SPME hyphenated with ambient mass spectrometry have also been described.

Covalent immobilization of covalent organic framework on stainless steel wire for solid-phase microextraction GC-MS/MS determination of sixteen polycyclic aromatic hydrocarbons in grilled meat samples

Covalent organic framework TpBD was grafted on stainless steel wire with polydopamine as a linker. The fabricated TpBD bonded stainless steel wire was used as the solid-phase microextraction fiber to extract sixteen polycyclic aromatic hydrocarbons (PAHs) for subsequent GC-MS/MS determination in grilled meat samples. The developed method gave the limits of detection (S/N = 3) from 0.02 (pyrene)-1.66 (naphthalene) ng L^-1 and enhancement factors from 1069 (naphthalene)-10879 (benz(a)anthracene). The relative standard deviations (RSDs) for intra-day and inter-day study are in the range of 2.6%-8.5% and 4.5%-9.4%, respectively. The fiber-to-fiber RSDs for three parallel prepared fibers were 5.3%-10.0%. One TpBD bonded fiber can stand at least 200 cycles without significant loss of extraction efficiency. The developed method was successfully applied for the determination of trace PAHs in grilled meat samples with recoveries from 85.1% to 102.8%.

Solid phase microextraction of polycyclic aromatic hydrocarbons by using an etched stainless-steel fiber coated with a covalent organic framework

A new covalent organic framework (COF) was synthesized by the amide coupling between 1,3,5-tris(4-aminophenyl)benzene and trimesoyl chloride at room temperature. The COF was applied as a steel fiber coating for the solid phase microextraction of polycyclic aromatic hydrocarbons (PAHs) from water samples. The effect of extraction time, salt concentration, and extraction temperature on the efficiency of SPME was optimized by a Box-Behnken design. The PAHs were quantified by gas chromatography with mass spectrometric detection. Figures of merit include (a) a wide linear range (typically from 0.2 ng L^-1 to 2 μg L^-1), (b) low limits of detection (0.29 to 0.94 ng L^-1 at S/N = 3), and (c) high enrichment factors (EFs; 819-2420). Density functional theory was employed to study the interaction between the COF cluster and the PAHs. The results demonstrated that the EFs increase with the enhancement of π stacking interaction. The repeatability (one fiber; n = 5) and reproducibility (fiber to fiber; n = 5), expressed as the relative standard deviations were in the range of 4.3%-8.4% and 8.5-11.0%, respectively. The recoveries of the PAHs from water samples spiked at levels of 20.0 and 100 ng L^-1 ranged from 79.0% to 105.0%. Graphical abstract A covalent organic framework prepared from 1,3,5-tris(4-aminophenyl)benzene and trimesoyl chloride (TAPB-TMC-COF) was synthesized and employed as solid phase microextraction (SPME) fiber coating for the extraction of polycyclic aromatic hydrocarbons from water samples prior to gas chromatography (GC) - mass spectrometric (MS) detection.

Porous Organic Frameworks: Advanced Materials in Analytical Chemistry

Porous organic frameworks (POFs), a general term for covalent-organic frameworks (COFs), covalent triazine frameworks (CTFs), porous aromatic frameworks (PAFs), etc., are constructed from organic building monomers with strong covalent bonds and have generated great interest among researchers. The remarkable features, such as large surface areas, permanent porosity, high thermal and chemical stability, and convenient functionalization, promote the great potential of POFs in diverse applications. A critical overview of the important development in the design and synthesis of COFs, CTFs, and PAFs is provided and their state-of-the-art applications in analytical chemistry are discussed. POFs and their functional composites have been explored as advanced materials in "turn-off" or "turn-on" fluorescence detection and novel stationary phases for chromatographic separation, as well as a promising adsorbent for sample preparation methods. In addition, the prospects for the synthesis and utilization of POFs in analytical chemistry are also presented. These prospects can offer an outlook and reference for further study of the applications of POFs.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.