A strategy of utilizing Zn(II) as metallic pivot in room temperature ionic liquid to prepare molecularly imprinted polymers for compound with intramolecular hydrogen bonds

Preparation of rutin imprinted monolith (RIM) by using porogen containing ion liquid [BMIM]PF6 and its molecular recognition

A [BMIM]PF6 ion liquid (IL)-assisted synthesis of a rutin imprinted monolith (RIM) was carried out in an in-situ polymerization method. Bi-functional monomers and a ternary porogen containing IL was used for the RIM preparation and a L9(33) orthogonal factor design performed. Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR) and N2 adsorption method was for structural characterization of the RIMs. The monolith was directly used as stationary phase in liquid chromatography to test the retention selectivity, adsorption capacity and extraction application. The optimized porogen consists of 900 μL DMF, 144 μL ACN and 216 μL IL. The monolith RIM-13 obtained under the optimized conditions possessed improved adsorption performance, with a dynamic adsorption capacity of 6.695 mg/g, an imprinting efficiency of 4.841 and a selectivity α value of 4.821. Additionally, this monolith had also higher specific surface area, pore volume and permeability than that obtained without IL and the homogeneity of the imprint sites could be improved by using IL. When the RIM-13 was applied to the separation and purification of rutin from tartary buckwheat, a rutin product with a purity higher than 92 % can be obtained by one cycle. This molecular imprint solid-phase extraction (MI-SPE) is of potency to be applied to preparative-scale separation of other natural products.

Cobalt (II)-Mediated Molecularly Imprinted Polymer as a Monolithic Stationary Phase for Separation of Racemic Citronellal by Liquid Chromatography

A metal-mediated molecularly imprinted polymer (MMIP) monolithic column was prepared as the stationary phase for high-performance liquid chromatography (HPLC) and applied to the enantiomeric separation of rac-citronellal. MMIP column was prepared through in situ copolymerizations with the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate/[BMIM][BF₄] as the primary pore-forming agent and cobalt(II) acetate as the metal pivot. Interactions between polymer components in the synthesized monolith were assessed by FTIR to identify the functional groups. The monolith morphology was characterized with SEM, and the template removal was detected by UV Spectrophotometry at 253 nm. In this study, (R)-(+)-citronellal was used as a template, whereas 4-vinylpyridine (4-VP) was employed as the functional monomer with two monomer crosslinkers, trimethylolpropane trimethacrylate (TRIM), and ethylene glycol dimethacrylate (EDMA). The ternary mixture of porogenic solvent consisted of [BMIM][BF₄], dimethylformamide (DMF), and dimethyl sulfoxide (DMSO) with the applied ratio of 1 : 1:1 (v/v) and 10 : 1:5 (v/v) for the preparation of MMIP using TRIM and EDMA crosslinkers, respectively. Co(II) ion was added to the porogenic solvent before being mixed with the functional monomer and the crosslinker mixtures. Separating the rac-citronellal was achieved on the synthesized MMIP, showing better selectivity than the monolithic metal-mediated nonimprinted polymer (MNIP), nonimprinted polymer (NIP), and molecularly imprinted polymer (MIP).

Role of Ionic Liquids in Composites in Analytical Sample Preparation

Ionic liquids (ILs) are a group of non-conventional salts with melting points below 100 °C. Apart from their negligible vapor pressure at room temperature, high thermal stability, and impressive solvation properties, ILs are characterized by their tunability. Given such nearly infinite combinations of cations and anions, and the easy modification of their structures, ILs with specific properties can be synthesized. These characteristics have attracted attention regarding their use as extraction phases in analytical sample preparation methods, particularly in liquid-phase extraction methods. Given the liquid nature of most common ILs, their incorporation in analytical sample preparation methods using solid sorbents requires the preparation of solid derivatives, such as polymeric ILs, or the combination of ILs with other materials to prepare solid IL-based composites. In this sense, many solid composites based on ILs have been prepared with improved features, including magnetic particles, carbonaceous materials, polymers, silica materials, and metal-organic frameworks, as additional materials forming the composites. This review aims to give an overview on the preparation and applications of IL-based composites in analytical sample preparation in the period 2017–2020, paying attention to the role of the IL material in those composites to understand the effect of the individual components in the sorbent.