Rapid detection and differentiation of Staphylococcus colonies using an optical scattering technology

Identifying antibiotic-resistant strains via cell sorting and elastic-light-scatter phenotyping

The proliferation and dissemination of antimicrobial-resistant bacteria is an increasingly global challenge and is attributed mainly to the excessive or improper use of antibiotics. Currently, the gold-standard phenotypic methodology for detecting resistant strains is agar plating, which is a time-consuming process that involves multiple subculturing steps. Genotypic analysis techniques are fast, but they require pure starting samples and cannot differentiate between viable and non-viable organisms. Thus, there is a need to develop a better method to identify and prevent the spread of antimicrobial resistance. This work presents a novel method for detecting and identifying antibiotic-resistant strains by combining a cell sorter for bacterial detection and an elastic-light-scattering method for bacterial classification. The cell sorter was equipped with safety mechanisms for handling pathogenic organisms and enabled precise placement of individual bacteria onto an agar plate. The patterning was performed on an antibiotic-gradient plate, where the growth of colonies in sections with high antibiotic concentrations confirmed the presence of a resistant strain. The antibiotic-gradient plate was also tested with an elastic-light-scattering device where each colony's unique colony scatter pattern was recorded and classified using machine learning for rapid identification of bacteria. Sorting and patterning bacteria on an antibiotic-gradient plate using a cell sorter reduced the number of subculturing steps and allowed direct qualitative binary detection of resistant strains. Elastic-light-scattering technology is a rapid, label-free, and non-destructive method that permits instantaneous classification of pathogenic strains based on the unique bacterial colony scatter pattern. KEY POINTS: • Individual bacteria cells are placed on gradient agar plates by a cell sorter • Laser-light scatter patterns are used to recognize antibiotic-resistant organisms • Scatter patterns formed by colonies correspond to AMR-associated phenotypes.

Machine learning identification of Pseudomonas aeruginosa strains from colony image data

When grown on agar surfaces, microbes can produce distinct multicellular spatial structures called colonies, which contain characteristic sizes, shapes, edges, textures, and degrees of opacity and color. For over one hundred years, researchers have used these morphology cues to classify bacteria and guide more targeted treatment of pathogens. Advances in genome sequencing technology have revolutionized our ability to classify bacterial isolates and while genomic methods are in the ascendancy, morphological characterization of bacterial species has made a resurgence due to increased computing capacities and widespread application of machine learning tools. In this paper, we revisit the topic of colony morphotype on the within-species scale and apply concepts from image processing, computer vision, and deep learning to a dataset of 69 environmental and clinical Pseudomonas aeruginosa strains. We find that colony morphology and complexity under common laboratory conditions is a robust, repeatable phenotype on the level of individual strains, and therefore forms a potential basis for strain classification. We then use a deep convolutional neural network approach with a combination of data augmentation and transfer learning to overcome the typical data starvation problem in biological applications of deep learning. Using a train/validation/test split, our results achieve an average validation accuracy of 92.9% and an average test accuracy of 90.7% for the classification of individual strains. These results indicate that bacterial strains have characteristic visual 'fingerprints' that can serve as the basis of classification on a sub-species level. Our work illustrates the potential of image-based classification of bacterial pathogens and highlights the potential to use similar approaches to predict medically relevant strain characteristics like antibiotic resistance and virulence from colony data.

Petri-plate, bacteria, and laser optical scattering sensor

Classical microbiology has paved the path forward for the development of modern biotechnology and microbial biosensing platforms. Microbial culturing and isolation using the Petri plate revolutionized the field of microbiology. In 1887, Julius Richard Petri invented possibly the most important tool in microbiology, the Petri plate, which continues to have a profound impact not only on reliably isolating, identifying, and studying microorganisms but also manipulating a microbe to study gene expression, virulence properties, antibiotic resistance, and production of drugs, enzymes, and foods. Before the recent advances in gene sequencing, microbial identification for diagnosis relied upon the hierarchal testing of a pure culture isolate. Direct detection and identification of isolated bacterial colonies on a Petri plate with a sensing device has the potential for revolutionizing further development in microbiology including gene sequencing, pathogenicity study, antibiotic susceptibility testing , and for characterizing industrially beneficial traits. An optical scattering sensor designated BARDOT (bacterial rapid detection using optical scattering technology) that uses a red-diode laser, developed at the beginning of the 21^st century at Purdue University, some 220 years after the Petri-plate discovery can identify and study bacteria directly on the plate as a diagnostic tool akin to Raman scattering and hyperspectral imaging systems for application in clinical and food microbiology laboratories.

Current State of Development of Biosensors and Their Application in Foodborne Pathogen Detection

ABSTRACT

Foodborne disease outbreaks continue to be a major public health and food safety concern. Testing products promptly can protect consumers from foodborne diseases by ensuring the safety of food before retail distribution. Fast, sensitive, and accurate detection tools are in great demand. Therefore, various approaches have been explored recently to find a more effective way to incorporate antibodies, oligonucleotides, phages, and mammalian cells as signal transducers and analyte recognition probes on biosensor platforms. The ultimate goal is to achieve high specificity and low detection limits (1 to 100 bacterial cells or piconanogram concentrations of toxins). Advancements in mammalian cell-based and bacteriophage-based sensors have produced sensors that detect low levels of pathogens and differentiate live from dead cells. Combinations of biotechnology platforms have increased the practical utility and application of biosensors for detection of foodborne pathogens. However, further rigorous testing of biosensors with complex food matrices is needed to ensure the utility of these sensors for point-of-care needs and outbreak investigations.

HIGHLIGHTS

On the application of multi-parametric optical phenotyping of bacterial colonies for multipurpose microbiological diagnostics

The development of new diagnostics techniques and modalities is critical for early detection of microbial contamination. In this study, the novel integrated system for multi-parametric optical phenotyping and characterization of bacterial colonies, is presented. The system combines Mach-Zehnder interferometer with a spectral imaging system for capturing multispectral diffraction patterns and multispectral two-dimensional transmission maps of bacterial colonies, along with the simultaneous interferometric profilometry. The herein presented investigation was carried out on five representative bacteria species and nearly 3000 registered multispectral optical signatures. The interferograms were analyzed by four-step phase shift algorithm to reconstruct the colony profile to enable the obtaining of the comparable optical signatures. The dedicated image processing algorithms were used for extraction of quantitative features of these signatures. The random forest algorithm was applied for selection of the most predictive set of features, which were used in classification model based on Support-Vector Machine. Obtained results have shown that the use of multiple multispectral optical signatures provide a multi-parametric bacteria identification at an exceptionally high accuracy (99.4-100%), significantly better than in case of classification based on each of these signatures (multispectral diffraction patterns, two-dimensional transmission coefficient maps), separately. Obtained results revealed that analysis of multispectral signatures can also be applied for characterisation of physical, physicochemical and chemical properties of the bacterial colonies in the presence of the antimicrobial factors. Therefore, the proposed label-free, non-destructive optical technique has perspectives to be exploited in the multipurpose diagnostics and it can be used as a pre-screening tool in microbiological laboratories.

Development of the Correction Algorithm to Limit the Deformation of Bacterial Colonies Diffraction Patterns Caused by Misalignment and Its Impact on the Bacteria Identification in the Proposed Optical Biosensor

Recently proposed methods of bacteria identification in optical biosensors based on the phenomenon of light diffraction on macro-colonies offer over 98% classification accuracy. However, such high accuracy relies on the comparable and repeatable spatial intensity distribution of diffraction patterns. Therefore, it is essential to eliminate all non-species/strain-dependent factors affecting the diffraction patterns. In this study, the impact of the bacterial colony and illuminating beam misalignment on the variation of classification features extracted from diffraction patterns was examined. It was demonstrated that misalignment introduced by the scanning module significantly affected diffraction patterns and extracted classification features used for bacteria identification. Therefore, it is a crucial system-dependent factor limiting the identification accuracy. The acceptable misalignment level, when the accuracy and quality of the classification features are not affected, was determined as no greater than 50 µm. Obtained results led to development of image-processing algorithms for determination of the direction of misalignment and concurrent alignment of the bacterial colonies’ diffraction patterns. The proposed algorithms enable the rigorous monitoring and controlling of the measurement’s conditions in order to preserve the high accuracy of bacteria identification.

Generalized spectral light scatter models of diverse bacterial colony morphologies

An optical forward-scatter model was generalized to encompass the diverse nature of bacterial colony morphologies and the spectral information. According to the model, the colony shape and the wavelength of incident light significantly affect the characteristics of a forward elastic-light-scattering pattern. To study the relationship between the colony morphology and the scattering pattern, three-dimensional colony models were generated in various morphologies. The propagation of light passing through the colony model was then simulated. In validation of the theoretical modeling, the scattering patterns of three bacterial genera, Staphylococcus, Exiguobacterium and Bacillus, which grow into colonies having convex, crateriform and flat elevations, respectively, were qualitatively compared to the simulated scattering patterns. The strong correlations observed between simulated and experimental patterns validated the scatter model. In addition, spectral effect on the scattering pattern was studied using the scatter model, and experimentally investigated using Staphylococcus, whose colony has circular form and convex elevation. Both simulation and experiment showed that changes in wavelength affected the overall pattern size and the number of rings.

Simultaneous detection of Salmonella enterica, Escherichia coli and Listeria monocytogenes in food using a light scattering sensor

AIM

To investigate the use of a light scattering sensor, BActerial Rapid Detection using Optical scattering Technology (BARDOT) coupled with a multipathogen selective medium, Salmonella, Escherichia and Listeria (SEL), for concurrent detection of the three major foodborne pathogens in a single assay.

METHODS AND RESULTS

BARDOT was used to detect and distinguish the three major pathogens, Salmonella enterica, Shiga toxin-producing Escherichia coli (STEC) and Listeria monocytogenes from food based on colony scatter signature patterns on SEL agar (SELA). Multiple strains of three test pathogens were grown on SELA, and BARDOT was used to generate colony scatter image libraries for inclusive (SEL Library) and exclusive (non-SEL Library) bacterial group. These pathogens were further differentiated using the SEL scatter image library. Raw chicken and hotdog samples were artificially inoculated with pathogens (100 CFU per 25 g each), and enriched in SEL broth at 37°C for 18 h and colonies were grown on SELA for 11-22 h before screening with BARDOT. The BARDOT sensor successfully detected and differentiated Salmonella, STEC and Listeria on SELA with high classification accuracy 92-98%, 91-98% and 83-98% positive predictive values (PPV) respectively; whereas the nontarget strains showed only 0-13% PPV. BARDOT-identified colonies were further confirmed by multiplex PCR targeting inlB gene of L. monocytogenes, stx2 of STEC and sefA of S. enterica serovar Enteritidis.

CONCLUSIONS

The results show that BARDOT coupled with SELA can efficiently screen for the presence of three major pathogens simultaneously in a test sample within 29-40 h.

SIGNIFICANCE AND IMPACT OF THE STUDY

This innovative SELA-BARDOT detection platform can reduce turnaround time and economic burden on food industries by offering a label-free, noninvasive on-plate multipathogen screening technology for reducing microbial food safety and public health concerns.