A hierarchically porous composite monolith polypyrrole/octadecyl silica/graphene oxide/chitosan cryogel sorbent for the extraction and pre-concentration of carbamate pesticides in fruit juices

Multiwalled Carbon Nanotubes Embedded in a Polymeric Matrix as a New Material for Thin Film Microextraction (TFME) in Organic Pollutant Monitoring

It is essential to monitor organic pollutants to control contamination levels in environmental water bodies. In this respect, the development of new materials based on functionalised polymeric films for the measurement of toxic compounds is of interest. In this study, we prepare new films based on polymer cellulose triacetate modified with multi-walled carbon nanotubes for the monitoring of selected compounds: a fungicide (chlorpyrifos) and two emerging contaminants, the musk tonalide and the bactericide triclosan, which are used in the formulation of personal care products. The films, upon contact with water samples and following the principles of thin film microextraction, allow the determination of organic pollutants at low concentration levels. The contact time of the film with a predetermined volume of water is fixed at 60 min, and the compounds are eluted with a small volume (1 mL) of organic solvent for GC-MS analysis. Parameters such as repeatability for different films and detection limits are found to be satisfactory. Applying the method to river water demonstrates its suitability and, in the cases of chlorpyrifos and tonalide, the absence of a significant matrix effect.

Porous organic framework as coating for stir bar sorptive extraction of carbamate pesticides from corn and potato samples

Three porous organic frameworks (POFs) were synthesized by the reaction between phloroglucinol and 1,4-phthalaldehyde, 4,4'-biphenyldialdehyde or tris-(4-formylphenyl) amine; the products are named as POF-a, POF-b and POF-c, respectively. They were used to prepare POFs coated stir bars respectively for the extraction of four carbamate pesticides (CMPs). POF-c coated stir bar exhibited better adsorption performance than POF-a/b coated stir bar and commercial stir bars, probably due to the stronger conjugated structure and hydrophobicity of POF-c, and resultant hydrophobic, π-π and hydrogen bonding interactions between them. The adsorption mechanism for target CMPs was verified by characterization techniques and molecular dynamics simulation. A method of POF-c coated stir bar sorptive extraction-high performance liquid chromatography-variable wavelength ultraviolet detector was developed for the analysis of four CMPs in corn and potato samples. Under the optimal conditions, LODs of the method were between 0.017 and 0.048 μg/L, and the linear range for four CMPs was 0.1/0.2-200 μg/L.

A dumbbell-shaped stir bar made from poly(3,4-ethylenedioxythiophene)-coated porous cryogel incorporating metal organic frameworks for the extraction of synthetic phenolic antioxidants in foodstuffs

A dumbbell-shaped stir bar adsorbent of MIL-101 entrapped in PVA cryogel coated with poly(3,4-ethylenedioxythiophene) was fabricated to extract synthetic phenolic antioxidants in foodstuffs. The interconnected porous of cryogel allowed the entrapment of MIL-101 and enhanced the surface areas of poly(3,4-ethylenedioxythiophene) coating which facilitated multiple adsorptions. The fabricated adsorbent was characterized and measured the adsorption capacities for synthetic phenolic antioxidants. Extraction efficiency was optimized by evaluating the effect of adsorbent compositions, extraction time, stirring speed, sample pH, desorption conditions, sample volume and ionic strength. The analysis of extracted synthetic phenolic antioxidants was carried out using high performance liquid chromatography. The developed analysis method provided a wide linear range of 0.20 - 200 µg kg^-1 for butylated hydroxyanisole and 0.50 - 200 µg kg^-1 for tert‑butylhydroquinone and butylated hydroxytoluene. The limits of detection were between 0.05 and 0.15 µg kg^-1. The developed stir bar adsorbent was utilized to extract these three synthetic phenolic antioxidants from juice, milk, infant formula and coffee creamer. Recoveries ranged from 87 to 101% with RSDs below 7%. The developed composite stir bar adsorbent was convenient to use, and good physical and chemical stability allowed efficient extraction for 12 extraction cycles.

Graphene-Based Materials Immobilized within Chitosan: Applications as Adsorbents for the Removal of Aquatic Pollutants

Graphene and its derivatives, especially graphene oxide (GO), are attracting considerable interest in the fabrication of new adsorbents that have the potential to remove various pollutants that have escaped into the aquatic environment. Herein, the development of GO/chitosan (GO/CS) composites as adsorbent materials is described and reviewed. This combination is interesting as the addition of graphene to chitosan enhances its mechanical properties, while the chitosan hydrogel serves as an immobilization matrix for graphene. Following a brief description of both graphene and chitosan as independent adsorbent materials, the emerging GO/CS composites are introduced. The additional materials that have been added to the GO/CS composites, including magnetic iron oxides, chelating agents, cyclodextrins, additional adsorbents and polymeric blends, are then described and discussed. The performance of these materials in the removal of heavy metal ions, dyes and other organic molecules are discussed followed by the introduction of strategies employed in the regeneration of the GO/CS adsorbents. It is clear that, while some challenges exist, including cost, regeneration and selectivity in the adsorption process, the GO/CS composites are emerging as promising adsorbent materials.

Super-porous semi-interpenetrating polymeric composite prepared in straw for micro solid phase extraction of antibiotics from honey, urine and wastewater

A cryogel-based semi-interpenetrating polymer network (Cryo-SIPN) was prepared in which conductive polymers such as polyaniline (PANI) and polypyrrole (PPy) were formed within the super porous network of acrylic acid cryogel. For completion of cryo-polymerization, all the constituent solutions were severely mixed and placed into the plastic straws and kept at -20°C and then the synthesized cyrogels were cut into the 1-cm length and freeze dried after washing with water. The Cryo-SIPN polymeric composite was applied in micro solid phase extraction (µSPE) of some selected antibiotic residues from various samples. The µSPE method combined with a high performance liquid chromatography-ultraviolet (HPLC-UV) system allowed trace quantification of antibiotic residues in the honey and water samples while the significant variables were optimized using a central composite design (CCD) to find optimum conditions. The method performance was satisfactory with recovery ranges from 70.0 to 109%. The limits of detection (S/N = 3) and quantification (S/N = 10) for all samples were within the 17-50 μg kg^-1 and 47-140 μg kg^-1 range, respectively. The relative standard deviation was less than 10 % for antibiotics in the foodstuff and water samples. The validated Cryo-SIPN-µSPE in conjunction with HPLC-UV, proved to be versatile, efficient and robust while its capability toward the trace determination of drugs residues in real-life samples is demonstrated in this work.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.