Switchable fluorescence of MoS2 quantum dots: a multifunctional probe for sensing of chromium(VI), ascorbic acid, and alkaline phosphatase activity

Development of an "on-off-on" fluoroprobe utilizing an anthrylimidazole-based fluorescent ionic liquid for sensitive Cr(VI) and ascorbic acid detection

Developing a rapid detection method of Cr(VI) and ascorbic acid (AA) is vital in the food and environmental fields. Herein, an anthrylimidazole-based fluorescent ionic liquid (AI-FIL) with the advantageous fluorescent properties was successfully prepared and used to construct a promising "on-off-on" fluoroprobe for rapid/sensitive Cr(VI) and AA detection. Cr(VI) could effectively quench the fluorescence of AI-FIL owing to the inner-filter effect and photoinduced electron-transfer process. However, the decreased fluorescence could be rapidly recovered by AA owing to the redox reaction between AA and Cr(VI). For Cr(VI) detection, a satisfactorily linear response (0.03-300 μM) was achieved with the corresponding detection limit of 9 nM. For AA detection, a good linearity from 1 to 1000 μM was obtained with the resultant detection limit of 0.3 μM. Moreover, the AI-FIL based fluoroprobe was successfully utilized for Cr(VI) and AA detection in food and water samples with satisfactory accuracy and precision.

Miniaturized ascorbic acid assay platform based on point discharge atomic emission spectrometry coupling with gold filament enrichment

BACKGROUND

Miniaturized microplasma-based atomic emission spectrometry (AES) has been extensively used for element analysis in recent years due to the advantages of low power consumption, low gas consumption, relatively low manufacturing and running cost, and the potential for real-time and field analysis. However, few applications in bioassay detection have been reported based on microplasma AES systems because of their relatively low sensitivity and the absence of indirect analytical strategies. It is still a challenge to develop a simple, sensitive, and portable microplasma-based AES bioassay approach.

RESULTS

In this work, a portable analytical system was designed based on point discharge chemical vapor generation atomic emission spectrometry (PD-CVG-AES) coupling with gold filament enrichment. The detection of ascorbic acid (AA) was realized indirectly by means of the highly sensitive analysis of Hg2+. The measurement was based on Ag + can decrease the concentration of Hg2+ by forming Ag-Hg amalgam in the presence of the reductant SnCl2, while AA can pre-reduce Ag + to Ag0, leading to the generation of silver nanoparticles (Ag NPs). The pre-reduce procedure can decrease the generation of Ag-Hg amalgam, resulting in the recovery of Hg2+ signal. The dissociative Hg2+ was further detected by PD-CVG-AES combination of gold filament enrichment, which significantly improved the detection sensitivity for both Hg2+ and AA. Under optimal conditions, the limit of detection (LOD) of AA is as low as 19 nM with a relative standard deviation (RSD, n = 5) of 0.7 %.

SIGNIFICANCE

The developed novel analytical strategy obviously broadens the application of microplasma-based AES, and it is well demonstrated by the determination of AA in several traditional Chinese medicines (TCMs), offering a higher level of sensitivity compared to current AA detection techniques. It has potential for future application in point-of-care testing (POCT) assays.

MoS2 quantum dots-based optical sensing platform for the analysis of synthetic colorants. Application to quinoline yellow determination

In this work, a novel fluorescence sensor has been designed to solve the actual need of new fast and inexpensive sensing platforms for the analysis of synthetic colorants. It is based on MoS2 quantum dots obtained by a hydrothermal method and incorporated as fluorophore into the matrix of PVC membranes, which are deposited on quartz substrates by spin-coating. It was proven, as in these conditions, MoS2 quantum dots maintain the fluorescent properties that they present in solution. Experiments carried out in solution displayed a maximum emission when they were excited under 310 nm. This initial fluorescence decreases linearly in presence of increasing concentrations of various synthetic colorants namely quinoline yellow, tartrazine, sunset yellow, allura red, ponceau 4R and carmoisine. The two possible mechanisms that can explain this quenching effect, colorants absorbing photons emitted by quantum dots and/or competing with the nanomaterial for photons coming from the excitation source, were evaluated. The most pronounced effect was observed with quinoline yellow, as a result of a mixed mechanism. The optimized methodology developed for the determination of quinoline yellow showed a linear concentration range between 5.4 and 55.0 µg with a limit of detection of 1.6 µg. The sensor was applied to the determination of quinoline yellow in a food colour paste obtaining results in good agreement with those obtained by HPLC-UV-vis measurements.

Recent Advancements in Developments of Novel Fluorescent Probes: In Cellulo Recognitions of Alkaline Phosphatases

Alkaline phosphatase (ALP) is one of the vital phospho-ester bond cleaving biocatalysts that has inevitable significance in cellular systems, viz., early-stage osteoblast differentiation, cell integrity in tissues, bone mineralization, cancer biomarker, liver dysfunction, cellular osmotic pressure, protein folding and many more. Variation from optimal levels of ALP in intra and extracellular fluids can cause severe diseases, including death. Due to these reasons, ALP is considered as a vital biomarker for various preclinical and medical diagnosis. Fluorescence image-based diagnosis is the most widely used method, owing to its simplicity, robustness, non-invasive properties and excellent spatio-temporal resolution (up to the nM/pM level), as compared to conventional analytical techniques, such as the electroanalytical method, nuclear magnetic resonance (NMR) and high-performance liquid chromatography (HPLC). Most of the reviews reported for ALP’s recognition in the literature scarcely explain the structurally related, photophysical and biophysical parameters; and the sub-cellular localizations. Considering these facts, in order to enhance the opto-analytical parameters of fluorescence-based diagnostic materials at the cellular level, herein we have systematically documented recent developments in the opto-analytical capabilities of quencher-free probes for ALP, used in in vitro (biological buffers) to in cellulo conditions, along with in vivo models.

Ascorbic acid detector based on fluorescent molybdenum disulfide quantum dots

A rapid and facile method is reported for the detection of ascorbic acid using molybdenum disulfide quantum dots (MoS₂ QDs) as a fluorescence sensor. Water-soluble and biocompatible MoS₂ QDs with the maximum fluorescence emission at 506 nm have been successfully synthesized by hydrothermal method and specific detection for ascorbic acid (AA) was constructed to utilize the modulation of metal ion on the fluorescence of MoS₂ QDs and the affinity and specificity between the ligand and the metal ion. The fluorescence of MoS₂ QDs was quenched by the irreversible static quenching of Fe³⁺ through the formation of a MoS₂ QDs/Fe³⁺ complex, while the pre-existence of AA can retain the fluorescence of MoS₂ QDs through the redox reaction between AA and Fe³⁺. Based on this principle, a good linear relationship was obtained in the AA concentration range 1 to 150 μM with a detection limit of 50 nM. The proposed fluorescent sensing strategy was proven to be highly selective, quite simple, and rapid with a requirement of only 5 min at room temperature (RT), which is particularly useful for rapid and easy analysis. Satisfactory results were obtained when applied to AA determination in fruits, beverages, and serum samples as well as AA imaging in living cells, suggesting its great potential in constructing other fluorescence detection and imaging platforms.

A Review of Off-On Fluorescent Nanoprobes: Mechanisms, Properties, and Applications

With the development of nanomaterials, fluorescent nanoprobes have attracted enormous attention in the fields of chemical sensing, optical materials, and biological detection. In this paper, the advantages of "off-on" fluorescent nanoprobes in disease detection, such as high sensitivity and short response time, are attentively highlighted. The characteristics, sensing mechanisms, and classifications of disease-related target substances, along with applications of these nanoprobes in cancer diagnosis and therapy are summarized systematically. In addition, the prospects of "off-on" fluorescent nanoprobe in disease detection are predicted. In this review, we presented information from all the papers published in the last 5 years discussing "off-on" fluorescent nanoprobes. This review was written in the hopes of being useful to researchers who are interested in further developing fluorescent nanoprobes. The characteristics of these nanoprobes are explained systematically, and data references and supports for biological analysis, clinical drug improvement, and disease detection have been provided appropriately.

Unique photoluminescence response of MoS2quantum dots over a wide range of As (III) in aqueous media

We report the solvothermal synthesis of MoS₂based quantum dots (QDs) and the performance evaluation of bare QDs for the detection of aqueous As (III) oxidative state at room temperature and neutral pH over a vast range (0.1-1000 ppb). Concentration-dependent photoluminescence (PL) of the QDs enhances up to 50 ppb and then suppresses till 1000 ppb. It shows two distinctive slopes for enhancement and suppression. The enhancement is possibly due to the passivation of trap states or defects. The formation of tiny glassy As₂S₃particles on the QD surface may be the possible reason for suppression. The pattern of optical absorption of QDs follows the similar patterns of PL. Still, it shows an enhanced absorbance in the near UV range below ≤300 nm, which increases with As (III) concentration up to 50 ppb and then decreases following the PL pattern. The MoS₂QDs were characterized by using transmission electron microscopy, x-ray diffraction, UV-Vis, and PL spectroscopy. The enhancement and suppression results were excellently fitted with the modified Stern-Volmer equation. The detection of arsenic is possible using these linear fit equations as calibration curves.

UV-emitting polyelectrolyte-modified MoS2 quantum dots for selective determination of nitrophenol in water samples based on inner filter effect

In this work, poly(sodium 4-styrenesulfonate) (PSS) modified molybdenum disulfide quantum dots (MoS2-PSS QDs) were synthesized via a simple hydrothermal method using l-cysteine and anhydrous sodium molybdate as precursors and PSS as a modification reagent, and a selective and sensitive fluorescent sensing method for the determination of p-nitrophenol (p-NP) based on their UV emission was developed. The obtained MoS2-PSS QDs have an obvious UV emission peak (390 nm) with quantum yield of 5.13%. The strong absorption peak of p-NP at 400 nm has large spectral overlap with the UV emission peak (390 nm) of MoS2-PSS QDs. Because of this p-NP absorption, the fluorescence of MoS2-PSS QDs at 390 nm is quenched with the introduction of p-NP via the inner filter effect (IFE) and the decreased fluorescence intensity was linearly proportional to the p-NP concentration in the range of 1–20 μmol/L, leading to a detection limit of 0.13 μmol/L for p-NP. The MoS2 QDs-based fluorescent probe for p-NP is sensitive and selective and was successfully applied in the determination of p-NP in the pond water samples with satisfactory results.

Simple hydrothermal approach for synthesis of fluorescent molybdenum disulfide quantum dots: Sensing of Cr3+ ion and cellular imaging

Nowadays, fluorescent molybdenum disulfide quantum dots (MoS₂ QDs) have proven to be potential candidates in the sensing and bioimaging areas owing to their exceptional intrinsic characteristics. Here, a simple hydrothermal strategy was explored for the preparation of MoS₂ QDs using ammonium heptamolybdate and 6-mercaptopurine (6-MP) as precursors. The emission peak of MoS₂ QDs was significantly quenched in the presence Cr³⁺ ion due to the selective surface chemistry on the surfaces of MoS₂ QDs. The designed fluorescent MoS₂ QDs showed a linear fluorescence quenching response with increasing concentration of Cr³⁺ ion (0.1-10 μM), allowing to detect Cr³⁺ ion even at 0.08 μM. This fluorescent MoS₂ QDs were utilized for the quantification of Cr³⁺ ion in real samples (water and biological samples). Interestingly, the synthesized MoS₂ QDs exhibited negligible cytotoxicity on NRK cells and acted as good candidates for imaging of Trichoderma viride fungal cells.

Fluorometric dopamine assay based on an energy transfer system composed of aptamer-functionalized MoS2 quantum dots and MoS2 nanosheets

The authors describe a fluorometric strategy for the determination of dopamine (DA). It is based on the use of aptamer-functionalized MoS₂ quantum dots (QDs) and MoS₂ nanosheets (NSs). The QDs and NSs were extensively characterized with regard to their physical and chemical properties using methods such as TEM, XRD, FT-IR, EDX and molecular spectroscopies. The aptamer against dopamine was labeled with QDs acting as the energy donor in an energy transfer system, while the NSs serve as the energy acceptor. Under the optimal conditions, the fluorescence (FL) intensity (best measured at excitation/emission peaks of 315/412 nm) increases with increasing DA concentration in the range from 0.1 nM to 1000 nM, with a lower detection limit of 45 pM. The method was successfully applied to the determination of DA in complex matrices. In our perception, the method has a wide scope in that it may be extended to other biomolecules for which respective aptamer are available. The QDs show excellent optical properties, good stability, low cytotoxicity, and may also be applied to fluorometric imaging of live cells. Graphical abstract A "turn-on" fluorometric aptasensor for the determination of dopamine (DA) was established based on aptamer-functionalized molybdenum disulfide quantum dots (MoS₂ QDs) and MoS₂ nanosheets. This assay exhibits high selectivity and sensitivity with a detection limit as low as 45 pM.