A new analytical framework for multi-residue analysis of chemically diverse endocrine disruptors in complex environmental matrices utilising ultra-performance liquid chromatography coupled with high-resolution tandem quadrupole time-of-flight mass spectrometry

Assessing the impact of soil microbial fuel cells on atrazine removal in soil

Widespread pesticide use in agriculture is a major source of soil pollution, driving biodiversity loss and posing serious threads to human health. The recalcitrant nature of most of these pesticides demands for effective remediation strategies. In this study, we assess the ability of soil microbial fuel cell (SMFC) technology to bioremediate soil polluted by the model pesticide atrazine. To elucidate the degradation mechanism and consequently define effective implementation strategies, we provide the first comprehensive investigation of the SMFC performance, in which the monitoring of the electrochemical performance of the system is combined with Quadrupole Time-of-Flight (QTOF) mass spectrometry and microbial analyses. Our results show that, while both SMFC and natural attenuation lead to a reduction on atrazine levels, the SMFC modulates the activity of different microbial pathways. As a result, atrazine degradation by natural attenuation leads to high levels of deisoproylatrazine (DIPA), a very toxic degradation metabolite, while DIPA levels in soil treated by SMFC remain comparatively low. The beta diversity and differential abundance analyses revealed how the microbial community evolves over time in the SMFCs degrading atrazine, demonstrating the enrichment of electroactive taxa on the anode, and the enrichment of a mixture of electroactive and atrazine-degrading taxa at the cathode. The detection and taxonomic classification of peripheral atrazine degrading genes, atzA, atzB and atzC, was carried out in combination with the differential abundance analysis. Results revealed that these genes are likely harboured by members of the order Rhizobiales enriched at the cathode, thus promoting atrazine degradation via the conversion of hydroxyatrazine (HA) into N-isopropylammelide (NIPA), as confirmed by mass spectrometry data. Overall, the comprehensive approach adopted in this work, provides fundamental insights into the degradation pathways of atrazine in soil by SMFC technology, which is critical for practical applications, thus suggesting an effective approach to advance research in the field.

A high-throughput analytical method for complex contaminant mixtures in biosolids

Biosolids are rich in organic matter and other nutrients that contribute to environmental and agricultural sustainability by improving soil textural and biological properties and enhancing plant growth when applied to agricultural crops. Land application of biosolids encourages resource recovery and circumvents drawbacks associated with landfilling or incineration. However, biosolids contain numerous chemicals at trace levels, and quantitative analysis of such mixtures in this complex matrix is crucial for understanding and managing application risks. There are currently few analytical methods available that are capable of extracting and quantifying a large range of the emerging contaminants found in biosolids. In this study, a simplified, rapid, and robust method of analysis was developed and validated for a high-priority organic contaminant mixture of 44 endocrine disrupting compounds known to occur in biosolids. Analytes consisted of chemicals from many classes with a wide range of physiochemical properties (e.g., log Kow values from -1.4 to 8.9). The biosolids extraction and cleanup protocol was validated for 42 of the targeted compounds. The UPLC-MS2 parameters were validated for all 44 organic contaminants targeted for study. From the two batches of biosolids tested using this analytical method, most of the targeted contaminants (86%) were detected with 100% frequency at concentrations ranging from 0.036 to 10,226 μg/kg dw. Performance results highlighted that internal standards alone could not negate biosolids matrix effects; thus, internal standards and the standard addition method were used for residue quantification. This was the first study to detect and quantify 6PPD-q in biosolids, and the first to quantify lidocaine and 11 other chemicals in biosolids using a single analytical method. This method may be expanded for analysis of additional chemicals in biosolids and comparable matrices.

Transformation products of antibacterial drugs in environmental water: Identification approaches based on liquid chromatography-high resolution mass spectrometry

In recent years, the presence of antibiotics in the aquatic environment has caused increasing concern for the possible consequences on human health and ecosystems, including the development of antibiotic-resistant bacteria. However, once antibiotics enter the environment, mainly through hospital and municipal discharges and the effluents of wastewater treatment plants, they can be subject to transformation reactions, driven by both biotic (e.g. microorganism and mammalian metabolisms) and abiotic factors (e.g. oxidation, photodegradation, and hydrolysis). The resulting transformation products (TPs) can be less or more active than their parent compounds, therefore the inclusion of TPs in monitoring programs should be mandatory. However, only the reference standards of a few known TPs are available, whereas many other TPs are still unknown, due to the high diversity of possible transformation reactions in the environment. Modern high-resolution mass spectrometry (HRMS) instrumentation is now ready to tackle this problem through suspect and untargeted screening approaches. However, for handling the large amount of data typically encountered in the analysis of environmental samples, these approaches also require suitable processing workflows and accurate tandem mass spectra interpretation. The compilation of a suspect list containing the possible monoisotopic masses of TPs retrieved from the literature and/or from laboratory simulated degradation experiments showed unique advantages. However, the employment of in silico prediction tools could improve the identification reliability. In this review, the most recent strategies relying on liquid chromatography-HRMS for the analysis of environmental TPs of the main antibiotic classes were examined, whereas TPs formed during water treatments or disinfection were not included.

An integrated One Health framework for holistic evaluation of risks from antifungal agents in a large-scale multi-city study

A new framework for retrospective mass spectral data mining for antifungal agents (AFs) and Wastewater-Based Epidemiology (WBE) was developed as part of One Health framework to tackle risks from AFs. A large scale, multi-city study was undertaken in South-West England. Key drivers of AFs in the catchment were identified with communal wastewater discharges being the main driver for human AFs (fluconazole, ketoconazole) and agricultural runoff being the main driver for pesticide AFs (prochloraz, prothioconazole and tebuconazole). Average WBE-estimated human used fluconazole and ketoconazole PNDIs (population normalised daily intake) exceeded 300 mg day-1 1000 inh-1 and 2000 mg day-1 1000 inh-1. This is much higher than PNDPs (population normalised daily prescriptions <40 mg day-1 1000 inh-1 and <80 mg day-1 1000 inh-1 for fluconazole and ketoconazole respectively). This was expected due to both prescription and over-the-counter usage, and both oral and topical applications. Pesticide AF, prothioconazole had PNDIs <40,000 mg day-1 1000 inh -1, which gave intake: 0.43, 0.26, 0.07 mg kg-1 in City A, B, and C, likely due to accounting for external/non-human sources. This is higher than the acceptable daily intake (ADI) of 0.01 mg kg-1bw day-1, which warrants further study. Intake per kg of body weight estimated using tebuconazole was 0.86, 1.39, 0.12, 0.13, and 2.7 mg kg-1 in City A-E respectively and is likely due to external/non-human sources. Intake calculated using its metabolite was 0.02 and 0.01 mg kg-1 in City B and C respectively, which aligned with ADI (0.03 mg kg-1bw day-1). The environmental risk assessment of AFs indicated low/medium risk from fluconazole, prochloraz, and tebuconazole, medium risk from epoxiconazole, prothioconazole's metabolite, and tebuconazole, and high risk for prothioconazole in river water. High risk was estimated from fluconazole, epoxiconazole, prothioconazole and its metabolite, tebuconazole, ketoconazole in wastewater samples, which is important during raw sewage discharge events via sewer overflows.

Short-term effects of an environmentally relevant concentration of organic UV filters on signal crayfish Pacifastacus leniusculus

Personal care products, including organic UV filters, are considered emerging contaminants, with their toxic effects being a concern in recent decades. UV filters continually enter surface waters via wastewater and human activity. Despite the presence of organic UV filters in the freshwater environment, little is known of their impact on aquatic biota. In this study, we evaluated the cardiac and locomotor responses of signal crayfish Pacifastacus leniusculus exposed to environmentally relevant concentrations of either 2-Phenylbenzimidazole-5-sulfonic acid (PBSA, 3 µg/L) or 5-Benzoyl-4-hydroxy-2-methoxybenzenesulfonic acid (BP4, 2.5 µg/L). Specimens exposed to the tested compounds for 30 min exhibited significantly greater changes in distance moved and time active than did unexposed controls. Significant differences of mean heart rate change compared to control were detected in both PBSA and BP4 experimental groups. Such behavior and physiological alterations demonstrate ecological effects of personal care products with the tested sunscreen compounds even with a short exposure. Evidence of the consequences of organic UV filters on aquatic organisms is scarce and is an important topic for future research.

Biotic transformation products of sulfonamides in environmental water samples: High-resolution mass spectrometry-based tentative identification by a suspect screening approach

The presence of pharmaceuticals in the aquatic environment is mainly due to their release from the effluents of the wastewater treatment plants (WWTPs), which are unable to completely remove them and their transformation products (TPs). Sulfonamides (SAs) are a synthetic antibacterial class used for the treatment of both human and animal infections; they have often been reported in surface water, thus contributing to the antibiotic resistance emergency. Monitoring SA TPs should be important as well because they could still exert some pharmaceutical activity; however, many TPs are still unknown since several transformation processes are possible (e. g. human and animal metabolism, WWTP activities, environmental factors etc.). In this work, three of the most used SAs, i.e., sulfamethoxazole (SMX), sulfapyridine (SPY), and sulfadiazine (SDZ), were incubated for 20 days in a batch reactor with activated sludge under controlled conditions. Then, the water sample was extracted and analyzed by ultra-high performance liquid chromatography-high resolution mass spectrometry in the data dependent acquisition (DDA) mode. Starting from the literature data, the possible transformation pathways were studied, and for each SA, a list of TPs was hypothesized and used for the identification. The raw data files were processed with Compound Discoverer, and 44 TPs (18, 13, and 13 TPs for SMX, SPY, and SDZ, respectively), including multiple TPs, were manually validated. To overcome the limitation of the DDA, the identified TPs were used in an inclusion list to analyze WWTP samples by a suspect screening approach. In this way, 4 SMX TPs and 5 SPY TPs were tentatively identified together with their parent compounds. Among these TPs, 5 of 9 were acetylated forms, in agreement with previous literature reporting that acetylation is the predominant SA transformation.

Research needs for optimising wastewater-based epidemiology monitoring for public health protection

Wastewater-based epidemiology (WBE) is an unobtrusive method used to observe patterns in illicit drug use, poliovirus, and severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). The pandemic and need for surveillance measures have led to the rapid acceleration of WBE research and development globally. With the infrastructure available to monitor SARS-CoV-2 from wastewater in 58 countries globally, there is potential to expand targets and applications for public health protection, such as other viral pathogens, antimicrobial resistance (AMR), pharmaceutical consumption, or exposure to chemical pollutants. Some applications have been explored in academic research but are not used to inform public health decision-making. We reflect on the current knowledge of WBE for these applications and identify barriers and opportunities for expanding beyond SARS-CoV-2. This paper critically reviews the applications of WBE for public health and identifies the important research gaps for WBE to be a useful tool in public health. It considers possible uses for pathogenic viruses, AMR, and chemicals. It summarises the current evidence on the following: (1) the presence of markers in stool and urine; (2) environmental factors influencing persistence of markers in wastewater; (3) methods for sample collection and storage; (4) prospective methods for detection and quantification; (5) reducing uncertainties; and (6) further considerations for public health use.

Human population as a key driver of biochemical burden in an inter-city system: Implications for One Health concept

This paper tests the hypothesis that human population and city function are key drivers of biochemical burden in an inter-city system, which can be used to inform One Health actions as it enables a holistic understanding of city's metabolism encompassing all of the activities of a city in a single model: from lifestyle choices, through to health status and exposure to harmful chemicals as well as effectiveness of implemented management strategies. Chemical mining of wastewater for biophysico-chemical indicators (BCIs) was undertaken to understand speciation of BCIs in the context of geographical as well as community-wide socioeconomic factors. Spatiotemporal variabilities in chemical and biological target groups in the studied inter-city system were observed. A linear relationship (R² > 0.99) and a strong positive correlation between most BCIs and population size (r > 0.998, p < 0.001) were observed which provides a strong evidence for the population size as a driver of BCI burden. BCI groups that are strongly correlated with population size and are intrinsic to humans' function include mostly high usage pharmaceuticals that are linked with long term non-communicable conditions (NSAIDs, analgesics, cardiovascular, mental health and antiepileptics) and lifestyle chemicals. These BCIs can be used as population size markers. BCIs groups that are produced as a result of a specific city's function (e.g. industry presence and occupational exposure or agriculture) and as such are not correlated with population size include: pesticides, PCPs and industrial chemicals. These BCIs can be used to assess city's function, such as occupational exposure, environmental or food exposure, and as a proxy of community-wide health. This study confirmed a strong positive correlation between antibiotics (ABs), population size and antibiotic resistance genes (ARGs). This confirms the population size and AB usage as the main driver of AB and ARG levels and provides an opportunity for interventions aimed at the reduction of AB usage to reduce AMR. Holistic evaluation of biophysicochemical fingerprints (BCI burden) of the environment and data triangulation with socioeconomic fingerprints (indices) of tested communities are required to fully embrace One Health concept.

Estimation of community-wide multi-chemical exposure via water-based chemical mining: Key research gaps drawn from a comprehensive multi-biomarker multi-city dataset

This paper explores the strong potential of chemical mining of wastewater for markers of community-wide intake of wide-ranging harmful chemicals belonging to several usage groups: industrial chemicals, personal care products, pesticides, illicit drugs, lifestyle chemicals and prescription pharmaceuticals as a proxy for multi-chemical community-wide exposure. An estimation of chemical intake in five contrasting town/cities based in the Avon River catchment in the South-West UK was undertaken. High-resolution spatiotemporal pharmaceutical prescription databases were used for system calibration, both in terms of biomarker selection and its correction factor, as well as for the overall system performance evaluation, both spatially and temporality. Only metabolism data accounting for phase two metabolism provided correct estimates of pharma intake. Using parent compounds as XCRs (xenobiotic compounds residue) was found to overestimate exposure due to an inclusion of directly disposed (unused) drugs. Spatiotemporal trends in XC intake were observed as a result of occupational exposure (higher bisphenol A (BPA) intake during weekday), and lifestyle choices (higher cocaine and pyrethroid pesticides intake during weekend). WBE is not intended to estimate individual exposure to chemicals. It can however provide estimates at a community level, and as a result, it has the potential to be developed into an early warning system, a powerful tool for large scale screening studies identifying communities at risk and in need of high resolution individual testing at a localised scale.

Multiresidue Pesticides Analysis of Vegetables in Vietnam by Ultrahigh-Performance Liquid Chromatography in Combination with High-Resolution Mass Spectrometry (UPLC-Orbitrap MS)

An ultrahigh-performance liquid chromatography in combination with high-resolution mass spectrometry Thermo Q-Extractive Focus Orbitrap MS has been introduced for analysis of multiclass pesticides in vegetable samples collected in Hanoi, Vietnam. Multiclass pesticides were separated on the Thermo Hypersil Gold PFP column utilizing a gradient of the mobile phase consisting of 5 mM ammonium formate, 0.1% formic acid in deionized water, and methanol. The target analytes were detected in the full-scan mode on Thermo Scientific Q-Exactive Focus Orbitrap MS for quantitation at the optimum operating conditions. These conditions included, but not limit to, the resolution of 70000 at the full width at half maximum in both positive and negative mode, mass range from 80 to 1000 m/z, and optimized parameters for the heated electrospray ionization source. The identification of the analytes in real samples was based on retention times, mass to charge ratios, mass accuracies, and MS/MS spectra at the confirmation mode with the inclusion list of target analytes. The mass accuracies of target analytes were from -4.14 ppm (dinotefuran) to 1.42 ppm (cinosulfuron) in the neat solvent and from -3.91 ppm (spinosad D) to 1.29 ppm (cinosulfuron) in the matrix-matched solution. Target analytes in the vegetable-based matrix were extracted by the QuEChERS method. Some critical parameters of the analytical method such as linearity, repeatability, limit of detection, and limit of quantitation have been evaluated and implemented. Excellent LOD and LOQ of the developed method were achieved at the range of 0.04-0.85 and 0.13-2.9 μg·kg^-1, respectively. Intraday and interday repeatability of the analytical signal (peak area, n=6) of the developed method were below 3% and 10%, correspondingly. The matrix effect, extraction recovery, and overall recovery were fully investigated by spiking experiments. Experimental results demonstrated that the ionization suppression or enhancement was the main contribution on the overall recoveries of target analytes. Finally, the in-house validated method was applied to pesticides screening in vegetables samples in local villages in Hanoi, Vietnam. The concentrations of all target analytes were below limit of quantitation and lower than US-FDA or EU maximum residue levels.