An ultrasensitive fluorescence sensor for determination of trace levels of copper in blood samples

Fabrication of surface ion imprinting rice husk-based polymer for selective detection and efficient adsorption of Cu2+ in lake water

With the deepening of the concept of recycling economy and green chemistry, selective detection and capture of Cu²⁺ from lake water by biosorbent are of great significance. Herein, the Cu²⁺ ion-imprinted polymers (RH-CIIP) with organosilane containing hydroxyl and Schiff base groups (OHSBG) as ion-receptor, fluorescent chromophores and cross-linking agent, and Cu²⁺ as template ion, were fabricated via surface ion imprinting technology by employing mesoporous silica MCM-41 (RH@MCM-41) as supporter. The RH-CIIP could be exploited as a fluorescent sensor for Cu²⁺ with high selective compared with Cu²⁺ non-imprinted polymers (RH-CNIP). Additionally, the LOD was calculated to be 5.62 μg/L, which is far below WHO standard for Cu²⁺ in drinking water of 2 mg/L, and more lower than the reported methods. Moreover, the RH-CIIP can also be utilized as an adsorbent for the effective elimination of Cu²⁺ from lake water with the adsorption capacity of 87.8 mg/g. Besides, the kinetic features of adsorption were well defined by the pseudo-second-order model and the sorption isotherm was in agreement with the Langmuir model. Meanwhile, the interaction of RH-CIIP and Cu²⁺ was investigated using theoretical calculations and XPS. Finally, RH-CIIP was able to remove almost 99 % Cu²⁺ in lake water samples that satisfied the drink water standard.

Ionic liquids functionalized Fe3O4-based colorimetric biosensor for rapid determination of ochratoxin A

A stainless steel mesh (SSM) with the feature of flexibility was employed as the colorimetric biosensor substrate, and aptamer was bond onto the surface of the SSM. Through the cross-linking of ionic liquids (ILs), AuPt nanoparticles were deposited  onto the surface of Fe3O4 material to obtain a magnetic nanozyme with high peroxidase catalytic activity and rapid color change. Through the competing interaction of OTA and cDNA with aptamer, AuPt@IL@Fe3O4 signal probe was separated to catalyze the 3,3',5,5'-tetramethylbenzidine/hydrogen peroxide (TMB/H2O2) system to observe the color by bare eye and record the absorbance at 652 nm using a UV-spectrophotometer. Through the study of the catalytic properties on the basis of the Michaelis equation, AuPt@IL@Fe3O4 nanozyme presented a Vmax of 3.85 × 10-8 M s-1 and Km of 0.01 mM. Under the optimized conditions, the linear range of the colorimetric biosensor towards OTA was 5-100 ng mL-1, and the detection limit was 0.078 ng mL-1. This biosensor was applied to beer and corn samples with recoveries of 70.4-102.6% and 93.3-104.7%, respectively. Results showed that this sensor is a portable, rapid, economical, sensitive visual sensing platform towards mycotoxin in real samples.

A microgel of CdSe quantum dots for fluorescent bisphenol A detection

A fluorescent microgel for BPA detection has been successfully prepared by cross-linking linear poly(styrene-co-glycidyl methacrylate) (poly (STY-co-GMA)) with L-cysteine-capped CdSe quantum dots (Lcys-caped CdSe QDs). The microgel contained specific binding sites created by the covalent grafting of the copolymer onto the QDs via the GMA units, allowing for selective trapping of BPA molecules through π-π and hydrogen bond interactions with phenyl, carboxylic, and amine groups. After binding, electron transfer from the QDs to the analyte quenched the fluorescence at a wavelength of 547 nm when excited at 400 nm. The rational compositional and structural design allows the microgel to accurately detect BPA concentrations over a wide dynamic range of 1.0×10^-1 to 1.0×10⁵ μg/L with a low detection limit (7.0×10^-2 to 8.0×10^-2 μg/L) in deionized, drinking, and tap waters within just 2.0 min. On top of that, the sensitivity for BPA detection was 2.0-4.6 times higher than that of the other 3 structural analogues, even molecular imprinting was not involved. The influence of the STY/GMA compositions in the copolymers and environmental conditions, including pH and ionic strength, on the sensing performance was determined. Moreover, the sensing mechanism and the selectivity with respect to the molecular features were elucidated.

Fabrication of MIL-101(Cr)/silver nanocomposites as SERS substrate for sensitive determination of malachite green and crystal violet in tilapia

Nanocomposites with multiple functions have attracted much attention in designing novel SERS substrates. In this report, the enrichment ability of MIL-101(Cr) and the local surface plasma resonance (LSPR) of silver nanoparticles are combined to fabricate a SERS substrate denoted as MIL-101-MA@Ag, which can simultaneously produce high-density and uniformly distributed hot spots. Moreover, the enrichment ability of MIL-101(Cr) can further improve the sensitivity by concentrating and transferring the analytes in the vicinity of hot spots. Under optimal conditions, MIL-101-MA@Ag showed good SERS activity for malachite green (MG) and crystal violet (CV), with detection limits as low as 9.5×10-11 M and 9.2×10-12 M at 1616 cm-1, respectively. The prepared substrate has been successfully applied to detect MG and CV in tilapia, the recovery rate of fish tissue extract was 86.4~102%, and the relative standard deviation (RSD) was 8.9~15%. The results demonstrate that MOF-based nanocomposites are expected to be useful SERS substrates and have a universal applicability for the detection of other hazardous molecules.

A signal "on-off-on"-type electrochemiluminescence aptamer sensor for detection of sulfadimethoxine based on Ru@Zn-oxalate MOF composites

An "on-off-on"-type electrochemiluminescence (ECL) aptamer sensor based on Ru@Zn-oxalate metal-organic framework (MOF) composites is constructed for sensitive detection of sulfadimethoxine (SDM). The prepared Ru@Zn-oxalate MOF composites with the three-dimensional structure provide good ECL performance for the "signal-on." The MOF structure with a large surface area enables the material to fix more Ru(bpy)₃²⁺. Moreover, the Zn-oxalate MOF with three-dimensional chromophore connectivity provides a medium which can accelerate excited-state energy transfer migration among Ru(bpy)₃²⁺ units, and greatly reduces the influence of solvent on chromophore, achieving a high-energy Ru emission efficiency. The aptamer chain modified with ferrocene at the end can hybridize with the capture chain DNA1 fixed on the surface of the modified electrode through base complementary pairing, which can significantly quench the ECL signal of Ru@Zn-oxalate MOF. SDM specifically binds to its aptamer to separate ferrocene from the electrode surface, resulting in a "signal-on" ECL signal. The use of the aptamer chain further improves the selectivity of the sensor. Thus, high-sensitivity detection of SDM specificity is realized through the specific affinity between SDM and its aptamer. This proposed ECL aptamer sensor has good analytical performance for SDM with low detection limit (27.3 fM) and wide detection range (100 fM-500 nM). The sensor also shows excellent stability, selectivity, and reproducibility, which proved its analytical performance. The relative standard deviation (RSD) of SDM detected by the sensor is between 2.39 and 5.32%, and the recovery is in the range 97.23 to 107.5%. The sensor shows satisfactory results in the analysis of actual seawater samples, which is expected to play a role in the exploration of marine environmental pollution.

Fe3O4/Au/porous Au nanohybrid for efficient delivery of doxorubicin as a model drug

Fe₃O₄/Au/porous Au nanohybrids being bi-functional nanoparticles with magnetic properties and high porosity, were synthesized and used for drug delivery. To achieve this purpose, after Fe₃O₄ nanoparticles synthesis, a gold layer coats them to increase their stability. Then, to improve the loading capacity of Fe₃O₄/Au nanoparticles, a shell of porous gold was synthesized on the Fe₃O₄/Au surface by creating an Ag-Au nanohybrid layer on Fe₃O₄/Au and dissolving the metallic silver atoms in HNO₃ (0.01 M). The DLS results show that the synthesized nanohybrid has an average size of 68.0 ± 7.7 nm and a zeta potential of - 28.1 ± 0.2 mV. Finally, doxorubicin (DOX), as a pharmaceutical agent, was loaded onto the Fe₃O₄/Au/porous Au nanohybrids. The prepared nano-drug enhanced the therapeutic efficacy of DOX on MCF-7 cancer cells compared to the free DOX. These results confirmed a 1.5 times improvement in the antitumor activity of DOX-loaded Fe₃O₄/Au/porous Au nanohybrids.

Determination of Ultra-Trace Amounts of Copper in Environmental Water Samples by Dispersive Liquid-Liquid Microextraction Combined with Graphite Furnace Atomic Absorption Spectrometry

A new method of dispersive liquid-liquid microextraction (DLLME) combined with graphite furnace atomic absorption spectrometry (GFAAS) was proposed for the determination of ultra-trace copper. It was based on the reaction of Cu(II) with the laboratory-prepared chelating agent 2-(5-bromo-2-pyridylazo)-5-dimethylaminoaniline (5-Br-PADMA) in a HAc-NaAc buffer solution at pH 5.0 to form stable hydrophobic chelates, which were separated and enriched by DLLME with chlorobenzene (C6H5Cl) and acetonitrile (CH3CN) as extraction and disperser solvents, respectively. The sedimented phase containing the chelates was then determined with GFAAS. Various operating variables that may be affected by the extraction process such as the pH of the solution, the concentration of the chelating agent 5-Br-PADMA, the types and volumes of extraction and disperser solvents, the extraction time, and the centrifugation time were investigated. Under optimum conditions, the calibration curve was linear in the range from 0.02 ng/mL to 0.16 ng/mL of copper with a correlation coefficient of r = 0.9961, and the detection limit was 0.01 ng/mL based on 3Sb. The relative standard deviation for six replicate measurements of 0.05 ng /mL of copper was 3.9%. An enrichment factor (EF) of 110 was obtained. The method has the advantages of low detection limit, high sensitivity, simple operation, less consumption of organic solvents, higher enrichment factor, and environmental friendliness and was applied to the determination of trace copper in environmental water samples with satisfactory results.

The Synthesis of 2,2-BIS(1-INDOL-3-YL)Acenaphthylene-1(2)-Ones Using Nanocatalysis: Fluorescent Sensing for Cu2+ Ions

2,2-bis(1H-indol-3-yl)acenaphthylene-1(2H)-ones were synthesised by the reaction of acenaphthenequinone and 2 equivalents of indole using Fe3O4@SiO2@Si-Pr-NH-CH2CH2NH2 as the basic magnetic nanocatalyst, assembled under greener and sustainable conditions in high purity and yields. Furthermore, the photoluminescence properties of 2,2-bis(2-methyl-1H-indol-3-yl)acenaphthylene-1(2H)-one were exploited for the sensing of copper ions in the mixed solvent systems comprising H2O and CH3CN in excitation wavelength at 410 nm with a detection limit of 9.5 ∙ 10–6 M.

Sulfonated calixarene modified Poly(methyl methacrylate) nanoparticles:A promising adsorbent for Removal of Vanadium Ions from aqueous media

The poly (methyl methacrylate) (PMMA)-based nanoparticle was synthesized by surfactant-free emulsion polymerization method and then post modified with Calixarene using (3-Aminopropyl)triethoxysilane organo-silane as a linker after OH-treatment. The prepared structure was applied for efficient adsorption of Vanadium ions in the aqueous solution after characterization by FT-IR, SEM, TEM, DLS, and EDX. Additional investigations discovered that the prepared adsorbent has a good capacity to adsorb vanadium ions. The effect of key experimental factors was studied to find the optimal point of adsorbent efficiency including the initial concentration of analyte, sorbent dosage, pH of the solution, contact time, and type/quantity of the eluents. It was specified, the maximum adsorption capacity for the synthesized nanoparticles was obtained about 322 mg g^-1. The adsorption mechanism was revealed that the model of Langmuir isotherm well-matched compared to the others due to the calculated equilibrium data. Besides, the kinetics of the adsorption process was fitted with pseudo-second-order. Eventually, the prepared adsorbent was successfully applied in vanadium adsorption from real water media.

A novel fluorescence sensor based on a tripodal carboxylic acid for detection and measurement of Cu2+ in tomato: Experimental and computational studies

A tripod organic compound, (4,4',4''-[1,3,5-Triazine-2,4,6-triyltris(oxy)] tribenzoic acid, TCPT), with donor triazine core and multiple fluorophore carboxylic motives, was prepared as an efficient ligand with high emission properties. The TCPT fluorescence emission properties as a chemical sensor were studied (λ_ex = 370nm) upon the addition of an appropriately diverse set of metal cations. The obtained results revealed the highly selective and efficient role of Cu²⁺ in quenching of TCPT, even with relevant interfering metal ions. The emission of TCPT was independent of the pH. The interaction of the sensor with Cu²⁺ and followed by absorption spectra and linear trend of the Stern-Volmer diagram, suggested a static quenching process. The density functional theory calculations were carried out to explore the identity of the electronic transition levels, HOMO-LUMO, and bandgap energies of TCPT. The linear range 1.00×10^-7-1.00×10^-6 M was obtained by fluorescence titration of a TCPT solution with Cu²⁺ ions at optimum conditions. The detection limit was calculated as 5.45×10^-8 M from the established calibration of titration data. The effect of various ions was studied, and there was no significant interference from the studied metal ions. For the real sample analysis, trace levels of Cu²⁺ ions were successfully determined in the tomato.

The Application of Modified SBA-15 as a Chemosensor

:

The Santa Barbara Amorphous (SBA-15), with a large surface area covered with abundant Si-OH active groups on the walls of its pores, can be modified with various organic compounds to build organic-inorganic hybrid materials, which can be used as a catalyst in organic reactions, drug delivery systems, nano sorbent due to its high capacity for removing heavy metals in waste water and as chemosensors for ions. Tunable and straight channels of SBA-15 facilitate the entrance and diffusion of ions through the channels. This paper presents a review of the past five years of literature covering the application of SBA-15 as an ions chemosensor in the liquid and gaseous media.

Preparation of bis-Schiff base immobilized mesoporous SBA-15 nanosensor for the fluorogenic sensing and adsorption of Cu2+

The inorganic−organic chemosensing material (MS-NSP) was developed by anchoring the bis-Schiff base fluorophore onto the channel surface of SBA-15 mesoporous silica surface with a quaternary ammonium linker. The mesostructure, morphology,...

Response surface methodology optimizing the adsorptive removal of azithromycin using mesoporous silica SBA-15: Mechanism, thermodynamic, equilibrium, and kinetics modeling studies

The objective of this research was to study an effective adsorbent for removing azithromycin (AZT) from industrial wastewater. AZT is an antibiotic used for many diseases remedy, but it is a pollutant to our environment; therefore, its residual should be removed from wastewater. The mesoporous SBA-15 silica as an efficient adsorbent was prepared by the hydrothermal method. The surface of mesoporous SBA-15 plays a significant role in the removal process; therefore, the characterization of the adsorbent was accomplished by several techniques. The batch system has been used, and the effect of four essential variables: pH (3-10), drug concentration (20-200 mg L^-1), sorbent weight (0.2-2 g L^-1), and temperature (20-40 °C) were investigated on the AZT removal efficiency by response surface methodology (RSM). The isotherm results were found to be in proper compliance with the isotherm model of Freundlich. In the kinetics part of this study, the experimental outcomes were fitted to the equation model of pseudo-second-order. The calculation of thermodynamic parameters shows that the removal process is spontaneous and endothermic. Upon the results, the vast surface area, the active functional groups, reusability, stability, and inexpensively make the mesoporous SBA-15 a suitable candidate for removal of AZT and similar antibiotics.

Molecular separation of ions from aqueous solutions using modified nanocomposites

Herein, two novel porous polymer matrix nanocomposites were synthesized and used as adsorbents for heavy metal uptake. Methacrylate-modified large mesoporous silica FDU-12 was incorporated in poly(methyl methacrylate) matrix through an in-situ polymerization approach. For another, amine-modified FDU-12 was composited with Nylon 6,6 via a facile solution blending protocol. Various characterization techniques including small-angle X-ray scattering, FTIR spectroscopy, field emission-scanning electron microscopy, transmission electron microscopy, porosimetry, and thermogravimetric analysis have been applied to investigate the physical and chemical properties of the prepared materials. The adsorption of Pb(II) onto the synthesized nanocomposites was studied in a batch system. After study the effect of solution pH, adsorbent amount, contact time, and initial concentration of metal ion on the adsorption process, kinetic studies were also conducted. For both adsorbents, the Langmuir and pseudo-second-order models were found to be the best fit to predict isotherm and kinetics of adsorption. Based on the Langmuir model, maximum adsorption capacities of 105.3 and 109.9 mg g-1 were obtained for methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6,6, respectively.

A simple "turn-on" fluorescence sensor for salicylaldehyde skeleton based on switch of PET-AIE effect

The selective detection of salicylaldehyde skeleton is of great significance in phytochemistry and biological research but rarely reported. In this research, a simple and highly selective "turn-on" fluorescence sensor (CDB-Am) for salicylaldehyde skeleton was developed based on switch of photoinduced electron transfer (PET) and aggregation-induced emission (AIE). CDB-Am bearing amino-cyanodistyrene structure responded to salicylaldehyde in the range of 3.1 to 40 μM with a detection limit of 0.94 μM. The sensing process of formation of Schiff-base adduct CDB-SA was confirmed by ¹H NMR, MS, and FT-IR spectra, revealing that a recovered AIE property accounted for the turn-on fluorescence response of CDB-Am and the intramolecular hydrogen bonding played a crucial role in the disruption of PET process. This sensing ability was successfully applied for both fluorescence qualitative test of salicylaldehyde skeleton on TLC analysis and quantitative detection of salicylaldehyde skeleton with good accuracy in the root bark of Periploca sepium, suggesting the extensive applications in phytochemistry and traditional Chinese herbal medicine. Furthermore, CDB-Am exhibited the first excellent fluorescence imaging ability in detecting salicylaldehyde skeleton in a living system. This work supplied a new strategy of preparing a novel "turn-on" fluorescence probe for detecting salicylaldehyde skeleton in complex environments and living bodies.

Preparation and Photoluminescent Properties of Three 5-Amino Benzothiadiazoles (5-amBTDs)

Three D-A compounds were designed and synthesized based on a benzothiadiazole acceptor. Azepane (AP), iminodubenzyl (IDB) and iminostilbene (ISB) were used, respectively, as donors and installed on the 5-position of BTD to afford 1, 2 and 3, respectively. Their photophysical properties in different states (solution, film, crystal, and powder) are systematically investigated. Among them, AIE-active compounds 2 and 3 were found to have good sensitivity toward viscosity and display quite good linear relationship with an increase in viscosity. Compound 2 displayed dual emission in solutions which largely depended on the polarity of the solvent. Meanwhile, compound 2 exhibits a mechanochromic character with disappearance and reappearance of a dual-emissive peak induced by mechanical grinding and solvent fuming. Furthermore, these three compounds can be used in the fabrication of blue OLED devices.