Fluorescent recognition and selective detection of nitrite ions with carbon quantum dots

Rapid, portable and visualizing nitrite detection enabled by a rationally designed meso-aminoindole substituted pyronine-based fluorescent probe

Nitrite (NO2-) widely exists in our daily diet, and its excessive consumption can lead to detrimental effects on the human central nervous system and an elevated risk of cancer. The fluorescence probe method for the determination of nitrite has developed rapidly due to its simplicity, rapidity and sensitivity. Despite establishing various nitrite sensing platforms to ensure the safety of foods and drinking water, the simultaneous achievement of rapid, specific, affordable, visualizing, and on-site nitrite detection remains challenging. Here, we designed a novel fluorescent probe by using Rhodamine 800 as the fluorescent skeleton and 5-aminoindole as the specific reaction group to solve this problem. The probe shows a maximal fluorescence emission at 602 nm, thereby avoiding background emission interference when applied to food samples. Moreover, this unique probe exhibited excellent sensing capabilities for detecting nitrite. These included: a rapid response time within 3 min, a noticeable color change that the naked eye can observe, a low detection limit of 13.8 nM, and a remarkable selectivity and specificity to nitrite. Besides that, the probe can detect nitrite quantitatively in barreled drinking water, ham sausage, and pickles samples, with good recoveries ranging from 89.0 % to 105.8 %. More importantly, based on the probe fixation and signal processing technology, a portable and smart sensing platform was fabricated and made convenient and rapid analysis the content of NO2- in real samples possible. The results obtained in this work provide a new strategy for the design of high-performance nitrite probes and feasible technology for portable, rapid and visual detection of nitrite, and this probe holds the potential as a practical tool for alleviating concern regarding nitrite levels.

Carbon quantum dots for fluorescent detection of nitrite: A review

NO₂^- is commonly found in foods and the environment, and excessive intake of NO₂^- poses serious hazards to human health. Thus, rapid and accurate assay of NO₂^- is of considerable significance. Traditional instrumental approaches for detection of NO₂^- faced with limitations of expensive instruments and complicated operations. Current gold standards for sensing NO₂^- are Griess assay and 2,3-diaminonaphthalene assay, which suffer from slow detection kinetics and bad water solubility. The newly emerged carbon quantum dots (CQDs) exhibit integrated merits including easy fabrication, low-cost, high quantum yield, excellent photostability, tunable emission behavior, good water solubility and low toxicity, which make CQDs be widely applied to fluorescent assay of NO₂^-. In this review, synthetic strategies of CQDs are briefly presented. Advances of CQDs for fluorescent detection of NO₂^- are systematically highlighted. Lastly, the challenges and perspectives in the field are discussed.

Progress on the luminescence mechanism and application of carbon quantum dots based on biomass synthesis

With the continuous development of carbon-based materials, a variety of new materials have emerged one after another. Carbon Quantum Dots (CQDs) have succeeded in standing out from the crowd of new materials due to their better optical properties in biomedicine, ion detection, anti-counterfeiting materials and photocatalysis. In recent years, through the continuous exploration of CQDs, research scholars have found that the organic substances or heavy metals contained in traditional ones can cause irreversible harm to people and the environment. Therefore, the application of traditional CQDs in future studies will be gradually limited. Among various new materials, biomass raw materials have the merits of good biocompatibility, lower toxicity and green and environmental protection, which largely overcome the defects of traditional materials and have attracted many scholars to focus on the research and development of various biomass CQDs. This paper summarises the optical properties, fluorescence mechanisms, synthetic methods, functionalisation modulation of biomass CQDs and their relevant research progress in the fields of ion detection, bioimaging, biomedicine, biosensing, solar cells, anti-counterfeit materials, photocatalysis and capacitors. Finally, the paper concludes with some discussion of the challenges and prospects of this exciting and promising field of application.

A fluorescent carbon dots synthesized at room temperature for automatic determination of nitrite in Sichuan pickles

In this paper, highly fluorescent carbon dots were synthesized from sodium ascorbate and polyethyleneimine at room temperature (R-CDs). The proposed green synthesis method was energy-saving, environmentally friendly and easy online. R-CDs exhibit an optimal emission peak of 490 nm under excitation at 380 nm with a quantum yield of 32 %. R-CDs morphology, composition, and properties were characterized using TEM, FTIR, XPS, UV-vis and fluorescence spectroscopy. The study revealed that nitrite quenched the fluorescence of R-CDs under acidic conditions. Subsequently, this discovered reaction of R-CDs and nitrite was combined with flow-injection technology, and a simple, precise and automatic fluorescence strategy for nitrite determination was accomplished. The response to nitrite was linear in 5-300 μg·L^-1 concentration range and the limit of detection was 2.85 μg·L^-1 (3.3 S/k). This method was applied to nitrite determination in Sichuan pickles during the pickling process and results were consistent with the standard method, demonstrating its feasibility in practical applications.

Intelligently design primary aromatic amines derived carbon dots for optical dual-mode and smartphone imaging detection of nitrite based on specific diazo coupling

Primary aromatic amines derived carbon dots (PAA-CDs) with the protonated amino groups and high quantum yield of 46% were favorably obtained by one-step solvothermal treatment of m-phenylenediamine (m-PDA) in acidic environment. The interaction between the PAA-CDs and nitrite (NO₂^-) was inherited the characteristic reaction of m-PDA (a primary aromatic amine) and NO₂^-, resulting in strong fluorescence quenching and obvious absorption variation of the PAA-CDs. Meanwhile, a chromogenic reaction of diazo coupling can cause significant color changes. Hence, the PAA-CDs were developed for an optical dual-mode and smartphone imaging sensor for NO₂^- detection in the range of 3.0 ~ 40.0 μM with high selectivity, good sensitivity, and excellent anti-interference capability. A limit of detection (LOD) of 0.024 μM and 0.16 μM was implemented by fluorometry and colorimetry, respectively. For smartphone imaging colorimetry, the LODs of 0.46 μM (visible color) and 0.99 μM (fluorescence color) were acquired. More importantly, the established sensor has been successfully applied for the dynamic detection of NO₂^- in various food samples with the satisfying results. A smartphone imaging colorimetry method based on the CDs was firstly proposed to visually and quantitatively detect NO₂^-, which will broaden the application range of the CDs in food safety inspection.

Ratiometric fluorescent sensors for nitrite detection in the environment based on carbon dot/Rhodamine B systems

A novel carbon dot/Rhodamine B-based ratiometric fluorescent probe was developed for a highly sensitivity and selective detection of nitrite (NO₂⁻). The probe showed colour changes from blue to orange under ultraviolet light in response to NO₂⁻ with a detection limit as low as 67 nM in the range of 0 to 40 μM. A ratiometric fluorescent test paper was successfully prepared using the probe solution, which demonstrated its feasibility towards a rapid and semi-quantitative detection of NO₂⁻ in real samples.

A visual ratiometric fluorescent sensor based on blue carbon dot/Rhodamine B is used to selectively detect NO₂⁻ in the environment.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

Designing an intriguingly fluorescent N, B-doped carbon dots based fluorescent probe for selective detection of NO2- ions

Low-cost nitrogen and boron-doped carbon nanodots (CPAP-CDs) with a high quantum yield (64.07%) were synthesized through a facile hydrothermal treatment. The obtained CPAP-CDs exhibited wide absorption, strong fluorescence, and pH-dependent behavior. The high fluorescence of CPAP-CDs was quenching in the presence of the nitrite ion in a concentration-dependent manner. The detection limit was as low as 6.6 nM with a wide linear detection range of 2 μM - 1 mM. Diazotization between the NO₂^- ion and CPAP-CDs resulted in the aggregation of CPAP-CDs and aggregation-induced emission quenching. The as-designed method was tested further with different water samples, such as tap, drinking, and seawater.

Reusable 3D silver superposed silica SERS substrate based on the Griess reaction for the ratiometric detection of nitrite

When nitrite is ingested and absorbed by the body, it can be converted into highly toxic nitrosamines (carcinogens, teratogens, and mutagens), posing health risks to the general population. Therefore, it calls for establishing a method for determination of nitrite. In this paper, the glass-SiO₂-Ag surface-enhanced Raman scattering (SERS) substrate with a large number of "hot spots" were prepared by two kinds of silane coupling agents. The SERS substrate had high sensitivity and repeatability. Silicon dioxide supported the silver nanoparticles (Ag NPs), which increased surface roughness of the substrate, generated a great quantity of hot spots and enhanced the SERS signal. In the SERS spectrum, the intensity ratio of the two characteristic peaks (1287 cm^-1 and 1076 cm^-1) had a good linear correlation with the logarithm of the concentration of nitrite, R² = 0.9652. The recoveries of 50 μM and 100 μM nitrite in three kinds of foods, three kinds of cosmetics and tap water were 90.9-105.3%.

Chitosan-derived N-doped carbon dots for fluorescent determination of nitrite and bacteria imaging

N-doped carbon dots (N-CDs) were successfully synthesized via simple one-step hydrothermal carbonization using chitosan as carbon and nitrogen sources. The obtained N-CDs contained a variety of functional groups on the NCDs surface, and exhibited excitation-independent behavior and strong blue fluorescence with a relatively higher fluorescence quantum yield (QY = 35%). It also presented excellent water solubility, resistance to pH change, high ion strength and UV irradiation. Since the fluorescence of the N-CDs could be selectively quenched by NO₂^-, they could act as a fluorescent sensor for the determination of NO₂^- in real tap water and lake water samples with a wide linear range (1-500 μM) and low detection limit (0.1 μM). They could also be used for bacterial imaging as multicolor fluorescent probes. The results indicated that N-CDs could be a promising candidate material for biomedical applications.

Preparation of N/S doped carbon dots and their application in nitrite detection

Detection of carcinogens is generally recognized to be meaningful, especially for nitrites (NO₂⁻). Here blue-green fluorescent carbon dots (CDs) were successfully synthesized by using p-aminobenzenesulfonic acid, and their surfaces were identified to be abundant in the functional groups of amino, hydroxyl, and sulfuric acid. Importantly, the sulfuric acid group and aromatic primary ammonia groups on the surfaces of CDs showed the interactions with the nitrites to cause fluorescence quenching. The novel CDs showed high sensitivity and selectivity for NO₂⁻ detection with a low detection limit of 0.03 mM in water due to the fluorescence quenching effect of the CDs. Consequently, the proposed CDs here may provide a new way of monitoring NO₂⁻ in the target samples.

Detection of carcinogens is generally recognized to be meaningful, especially for nitrites (NO₂⁻).

Dansyl-modified carbon dots with dual-emission for pH sensing, Fe3+ ion detection and fluorescent ink

In this work, a multifunctional ratiometric fluorescence (FL) nanohybrid (CSCDs@DC) was synthesized from chitosan based carbon dots (CSCDs) and dansyl chloride (DC) at room temperature. The CSCDs@DC revealed strong FL intensity, great stability and excellent anti-photobleaching properties. Herein, CSCDs@DC was responsive to pH value in the range of 1.5-4.0 and exhibited color-switchable FL properties between acidic and alkaline environments. In addition, CSCDs@DC showed good selectivity and sensitivity towards Fe³⁺ ions. A good linear relationship for the Fe³⁺ ion detection was obtained in the range from 0 μM to 100 μM, with a detection limit of 1.23 μM. What's more, CSCDs@DC can be used as a fluorescent ink. It expressed superior optical properties after 3 months of storage or continuous exposure to UV light for 24 h. This study suggested that CSCDs@DC had potential in the detection of pH and metal ions, as well as showing promising application in the anti-counterfeiting field.