Synthesis of bifunctional cabbage flower-like Ho3+/NiO nanostructures as a modifier for simultaneous determination of methotrexate and carbamazepine

Electrochemistry as a Powerful Tool for Investigations of Antineoplastic Agents: A Comprehensive Review

Cancer is most frequently treated with antineoplastic agents (ANAs) that are hazardous to patients undergoing chemotherapy and the healthcare workers who handle ANAs in the course of their duties. All aspects related to hazardous oncological drugs illustrate that the monitoring of ANAs is essential to minimize the risks associated with these drugs. Among all analytical techniques used to test ANAs, electrochemistry holds an important position. This review, for the first time, comprehensively describes the progress done in electrochemistry of ANAs by means of a variety of bare or modified (bio)sensors over the last four decades (in the period of 1982-2021). Attention is paid not only to the development of electrochemical sensing protocols of ANAs in various biological, environmental, and pharmaceutical matrices but also to achievements of electrochemical techniques in the examination of the interactions of ANAs with deoxyribonucleic acid (DNA), carcinogenic cells, biomimetic membranes, peptides, and enzymes. Other aspects, including the enantiopurity studies, differentiation between single-stranded and double-stranded DNA without using any label or tag, studies on ANAs degradation, and their pharmacokinetics, by means of electrochemical techniques are also commented. Finally, concluding remarks that underline the existence of a significant niche for the basic electrochemical research that should be filled in the future are presented.

Simple and sensitive electrochemical sensing of amethopterin by using carbon nanobowl/cyclodextrin electrode

Resulted from the severe side effects, the development of inexpensive, simple and sensitive method for amethopterin (ATP, an antineoplastic drug) is very important but it still remains a challenge. In this work, low cost nanohybrid composed of carbon nanobowl (CNB) and β-cyclodextrins (β-CD) (CNB-CD) was prepared with a simple autopolymerization way and applied as electrode material to develop a novel electrochemical sensor of ATP. Scanning-/transmission-electron microscopy, Fourier transform infrared spectrum, photographic image and electrochemical technologies were utilized to characterize morphologies and structure of the as-prepared CNB and CNB-CD materials. On the basic of the coordination advantages from CNB (prominent electrical property and surface area) and β-CD (superior molecule-recognition and solubility capabilities), the CNB-CD nanohybrid modified electrode exhibits superior sensing performances toward ATP, and a low detection limit of 0.002 μM coupled with larger linearity of 0.005-12.0 μM are obtained. In addition, the as-prepared sensor offers desirable repeatability, stability, selectivity and practical application property, confirming that this proposal may have important applications in the determination of ATP.

Synthesis of a dual-functional terbium doped copper oxide nanoflowers for high-efficiently electrochemical sensing of ofloxacin, pefloxacin and gatifloxacin

The current effort introduces a facile construction of peony-like CuO:Tb³⁺ nanostructure (P-L CuO:Tb³⁺ NS), whose characterization was determined via techniques of X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy. We investigated ofloxacin, pefloxacin and gatifloxacin oxidation electrochemically on P-L CuO:Tb³⁺ NS-modified glassy carbon electrode (P-L CuO:Tb³⁺ NS/GCE), the results of which revealed the irreversible oxidation of drugs through a two-electron oxidation process. An admirable resolution was found for this modified electrode between voltammetric peaks of ofloxacin, pefloxacin and gatifloxacin, suggesting its appropriateness for simultaneous detection of these drugs in pharmaceutical media. In addition, our nanostructure synergistically influenced the electro-catalytic oxidations of these three compounds. Differential pulse voltammetric measurements of ofloxacin, pefloxacin and gatifloxacin through our sensor showed a limit of detection of 1.9, 2.3 and 1.2 nM a as well as a linear dynamic range between 0.01 and 800.0 μM in phosphate buffered solution (0.1 M, pH = 6.0), respectively. Moreover, as-fabricated sensor could successfully co-detect these drugs in real serum and tablets specimens. In addition, since we use animal foods such as milk it is very important to detect their fluoroquinolone residues. For this purpose, the proposed sensor was tested to determine the residues of ofloxacin, pefloxacin and gatifloxacin in milk.

Sandwich-Type Electrochemical Aptasensor for Highly Sensitive and Selective Detection of Pseudomonas Aeruginosa Bacteria Using a Dual Signal Amplification Strategy

An electrochemical aptasensor developed to realize the detection of Pseudomonas aeruginosa (P. aeruginosa) bacteria based on a signal amplification strategy. The carbon screen-printed electrode (CSPE) surface was modified by MIL-101(Cr)/Multi-walled carbon nanotubes (MWCNT), which significantly increased the effective surface area of the electrode, thus resulting in further F23 aptamer immobilization at the surface of the modified electrode. As a result, the P. aeruginosa can be efficiently captured onto the surface of the aptasensor. Moreover, aptamer immobilized on the two-dimensional graphitic carbon nitride complex with silver nanoparticles (AgNPs/c-g-C₃N₄/Apt) was used as an electrochemical signal label, connected to P. aeruginosa bacteria at the modified electrode. This strategy increased the aptamer surface density and the sensitivity for detecting P. aeruginosa. Also, the resultant material was thoroughly characterized using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis techniques. A highly sensitive voltammetric aptasensor for P. aeruginosa detection was obtained via this strategy at the limit of detection of 1 Colony-forming unit (CFU)/mL (σ = 3). Therefore, this proposed strategy with dual signal amplification can be a promising platform for simple, practical, reliable, and sensitive method for P. aeruginosa.

A novel and ultrasensitive electrochemical DNA biosensor for pralatrexate detection

An attempt was made to develop a new sensitive biosensor for pralatrexate, as an anticancer drug, based on its interaction with the guanine of fish sperm DNA anchored on a screen-printed electrode (SPE) modified with polypyrrole (PP)/octahedral Pd-doped Co₃O₄ composite (Oh-Pd-doped Co₃O₄ C). Electrochemical techniques like differential pulse voltammetry verified the mechanism of such an interaction on the dsDNA/PP/Oh-Pd-doped Co₃O₄ C/SPE surface. A reduction in the peak current of guanine oxidation elucidated the interaction in acetate buffer with pH = 4.8. The optimization of response was performed for the interaction method according to potential, accumulation time, reproducibility and drug content. The linear dynamic range was estimated at 1.0 nM to 150.0 μM as well as a limit of detection as low as 0.61 nM for the DNA and pralatrexate concentrations. The practical potential of the proposed sensor was verified by determining pralatrexate in its pharmaceutical matrices.

Development of the DNA-based voltammetric biosensor for detection of vincristine as anticancer drug

In the article presented herein, a deoxyribonucleic acid (DNA) biosensor is introduced for Vincristine determination in pharmaceutical preparations based on the modification of screen printed electrode (SPE) with double-stranded DNA (ds-DNA), polypyrrole (PP), peony-like CuO:Tb³⁺ nanostructure (P-L CuO:Tb³⁺ NS). The developed sensor indicated a wide linear response to Vincristine concentration ranged from 1.0 nM to 400.0 μM with a limit of detection as low as .21 nM. The intercalation of Vincristine with DNA guanine led to the response. The optimized parameters for the biosensor performance were ds-DNA/Vincristine interaction time, DNA concentration and type of buffer solution. The docking investigation confirm the minor groove interaction between guanine base at surface of or ds-DNA/PP/P-L CuO:Tb³⁺ NS/SPE and Vincristine. The proposed sensor could successfully determine Vincristine in Vincristine injections and biological fluids, with acceptable obtains.

Electrochemical sensing of fentanyl as an anesthesia drug on NiO nanodisks combined with the carbon nanotube-modified electrode

Fentanyl was successfully determined in the current effort based on hexagonal NiO nanodisks (HG-NiO-NDs) fabricated by the hydrothermal protocol. The synergism of HG-NiO-NDs with multiwall carbon nanotubes (MWCNTs), large specific surface area, and active material enabled the electrochemical sensor to show potent electrochemical behavior. Admirable performance was found for the fentanyl measurement by the MWCNT and HG-NiO-ND-modified pencil graphite electrode (MWCNT/HG-NiO-ND/PGE). The correlation of oxidation currents with the pH value, concentration, and sweep rate of supporting electrolytes was determined for the optimization of conditions to detect fentanyl. The surfaces of modified and unmodified electrodes were characterized as well. The diffusion-control processes were confirmed on the basis of anodic peak findings. The results also revealed a two-electron transfer process. The linear range was obtained to be 0.01–800.0 μM for the fentanyl concentrations on the developed electrode, with the sensitivity of 0.1044 μA/mM/cm2. The limit of detection (S/N = 3) was 6.7 nM. The results indicated the ability of the modified electrode to fabricate non-enzymatic fentanyl sensor applications.

Detection of abemaciclib, an anti-breast cancer agent, using a new electrochemical DNA biosensor

Detection of DNA molecules and possible chemotherapy-induced changes in its structure has been the goal of researchers using rapid, sensitive and inexpensive approaches. Therefore, the aim of this study was to fabricate a new electrochemical DNA biosensor using pencil graphite electrodes modified with polypyrrole/Ce doped hexagonal nickel oxide nanodisks or PP/Ce-doped H-NiO-ND composites for determination of Abemaciclib (AMC) and ds-DNA molecules. The DNA biosensor was prepared by immobilizing ds-DNA on the surface of PP/Ce-doped H-NiO-ND/PGE. Differential pulse voltammetry (DPV) was used to electrochemically detect AMC. The results elucidate the extremely high sensitivity of the ds-DNA/PP/Ce-doped H-NiO-ND/PGE biosensor to AMC, with a narrow detection limit of 2.7 nM and a lengthy linear range of 0.01–600.0 μM. The admirable performance of as-fabricated biosensor could be related to the active reaction sites and the unique electrochemical response related to the nanocomposites by enhancing ds-DNA stabilization and accelerating electron transfer on the surface of electrode.

Simultaneous Electrochemical Determination of Chlorzoxazone and Diclofenac on an Efficient Modified Glassy Carbon Electrode by Lanthanum Oxide@ Copper(I) Sulfide Composite

This study synthesized a La2O3@snowflake-like Cu2S composite to fabricate an electrochemical sensor for sensitively simultaneous detection of diclofenac and chlorzoxazone exploiting an easy hydrothermal approach, followed by analysis with XRD, FE-SEM, and EDX methods. According to voltammetric studies, the electrocatalytic diclofenac and chlorzoxazone oxidations on the electrode modified with La2O3@SF-L Cu2S composites were increased, with greater oxidation currents, as well as the oxidation potential was significantly decreased due to synergetic impact of La2O3@SF-L Cu2S composites when compared with the pure SF-L Cu2S NS-modified electrode. The differential pulse voltammetry findings showed wide straight lines (0.01–900.0 μM) for La2O3 NP@SF-L Cu2S NS-modified electrode with a limit of detection (LOD) of 1.7 and 2.3 nM for the detection of diclofenac and chlorzoxazone, respectively. In addition, the limit of quantification was calculated to be 5.7 and 7.6 nM for diclofenac and chlorzoxazone, respectively. The diffusion coefficient was calculated to be 1.16 × 10−5and 8.4 × 10−6 cm2/s for diclofenac and chlorzoxazone oxidation on the modified electrode, respectively. Our proposed electrode was examined for applicability by detecting diclofenac and chlorzoxazone in real specimens.

A DNA Biosensor Based on a Raspberry-like Hierarchical Nano-structure for the Determination of the Anticancer Drug Nilotinib

It is crucial to design fast, sensitive and affordable deoxyribonucleic acid (DNA) recognition instruments, and elucidate changes in DNA structure, for studying the interaction between DNA and chemotherapy drugs. Therefore, a DNA biosensor, based on a carbon paste electrode (CPE), modified with raspberry-like indium(III)/nickel oxide hierarchical nano-structures (In3+ /NiO RLHNSs) was constructed. An electrochemical readout should then give information on the interactions between anticancer drugs and double-stranded (ds)-DNA. The morphology as well as the electrochemical description of this new biosensor is described. Based on experimentally determined optimal conditions, ds-DNA modified with In3+ /NiO RLHNSs/CPE was used to evaluate the binding interaction of nilotinib, as an anti-cancer drug, with DNA through differential pulse voltammetry (DPV), UV-Vis spectroscopy, viscosity measurements and a computational docking process. The analyses indicated the linearity of the guanine oxidation signal at nilotinib concentration is given between 0.01 and 50.0 μm, with the limit of detection (LOD) equal to 0.62 nm. Additionally, the equilibrium constant (K) for the binding was determined to 1.5×104  m-1 . Through the quantitative measurement of nilotinib in serum samples with a high recovery rate of 101.3-98.0 %, the applicability of this approach was demonstrated. As a whole, this DNA biosensor may be promising for various bio-interactions.

Simple, low-cost and sensitive electrochemical sensing of antineoplastic drug amethopterin based on a nanocarbon black modified electrode

Various methods have been proposed currently to detect amethopterin (ATP, a widely used anticancer drug that is also called methotrexate); however, a simple and low-cost electrochemical method coupled with high sensitivity is scarce. In this study, by using low-cost and readily available nanocarbon black (NCB), which has excellent conductivity and stable dispersion in water as well as large surface area, as electrode materials to modify a glassy carbon electrode (GCE), a simple, inexpensive and highly-sensitive electrochemical sensor was constructed based on NCB/GCE. The electrochemical behaviors of ATP at both NCB/GCE and GCE were studied; the results show that the peak current of ATP at NCB/GCE is extremely higher than that at the bare GCE. For sensing ATP with high sensitivity, various control conditions including accumulation time, pH values of the phosphate buffer solution and NCB amount were optimized. The quantitative testing results show that NCB/GCE presents excellent sensing performances with a wide linearity range from 0.01 to 10.0 μM and low limit of detection (4.0 nM) towards ATP. Moreover, the investigation in the reproducibility and stability as well as selectivity of NCB/GCE demonstrated that the related results are also satisfactory. It is thus simple and effective method for ATP analysis and has important applications.

An electrochemical sensor based on hierarchical nickel oxide nanostructures doped with indium ions for voltammetric simultaneous determination of sunset yellow and tartrazine colorants in soft drink powders

The current study was designed to develop a single-step and simple approach to effectively fabricate three-dimensional raspberry-like In³⁺/NiO hierarchical nanostructures (In³⁺/NiO RLHNSs) as a modifier, which was subsequently characterized by the techniques of X-ray diffraction (XRD), energy dispersive spectrometry (EDS) and field emission scanning electron microscopy (FE-SEM). The new prepared nano-modifier was practically used to co-detect electrochemically sunset yellow and tartrazine dyes. Potent sensitivity and acceptable selectivity were obtained for the produced In³⁺/NiO RLHNSs to co-detect both the food colorants, thus providing oxidation peaks in differential pulse voltammetry (DPV) with a peak potential separation of ca. 190 mV. The results showed a 5.14-fold and 8.07-fold increase in the electrochemical response of our modified electrode to sunset yellow and tartrazine, respectively, compared to the control (the unmodified electrode). Limits of detection of 2.7 and 3.1 nM were calculated for sunset yellow and tartrazine, respectively. The results from the interaction of common food additives showed satisfactory outcomes for the application of this method in determining sunset yellow and tartrazine in several beverage specimens. Other useful documentation was obtained for the production of portable food additive sensors.

A label-free electrochemical biosensor based on 3D cubic Eu3+/Cu2O nanostructures with clover-like faces for the determination of anticancer drug cytarabine

The present research utilized a simplified procedure for developing a novel electro-chemical DNA biosensor based on a carbon paste electrode (CPE) modified with three-dimensional (3D) cubic Eu³⁺/Cu₂O nanostructures with clover-like faces (Eu³⁺/Cu₂O CLFNs). The modified electrode was applied to monitor electro-chemical interactions between dsDNA and cytarabine for the first time. Then, the decreased oxidation signal of guanine following the interactions between cytarabine and dsDNA was utilized as an indicator for selectively determining cytarabine using differential pulse voltammetry (DPV). According to the findings, the oxidation peak current of guanine was linearly proportionate with the cytarabine concentration in the range between 0.01 and 90 μM. Additionally, the limit of quantification (LOQ) and the limit of detection (LOD) respectively equaled 9.4 nM and 2.8 nM. In addition, the repeatability, applicability and reproducibility of this analysis to drug dosage forms and human serum samples were investigated. Furthermore, UV-vis spectroscopy, DPV, docking and viscosity measurements were applied to elucidate the interaction mechanism of dsDNA with cytarabine. It was found that this DNA biosensor may be utilized to sensitively, accurately and rapidly determine cytarabine.

Highly sensitive electrochemical determination of methotrexate based on a N-doped hollow nanocarbon sphere modified electrode

As an antineoplastic drug, methotrexate (MTX) is widely applied in cancer therapies; however it has potentially toxic activity, and thus the qualitative and quantitative determination of MTX is of great significance. In this paper, by using dopamine synchronously as a carbon and N source, N-doped hollow nanocarbon sphere (NHNC) hybrids were prepared via a simple self-polymerization method and used to construct a new electrochemical sensor for MTX. The prepared NHNC exhibits a uniform hollow nanostructure with high conductivity and electrocatalytic properties as well as large adsorption capacity and surface area, which are the key factors for improving the sensor sensitivity of MTX. For achieving highly sensitive determination of MTX, various conditions were optimized, and the final results show that the NHNC modified electrode has excellent sensing responses for MTX, and it has a wide linear range from 0.05 to 14.0 μM coupled with a low detection limit of 0.01 μM. Finally, studies on the reproducibility, stability and selectivity of the NHNC modified electrode show that the corresponding results are satisfactory.

Simultaneous determination of methadone and morphine at a modified electrode with 3D β-MnO2 nanoflowers: application for pharmaceutical sample analysis

The present research synthesized manganese dioxide nano-flowers (β-MnO₂-NF) via a simplified technique for electro-catalytic utilization. Moreover, morphological characteristics and X-ray analyses showed Mn in the oxide form with β-type crystallographic structure. In addition, the research proposed a new efficient electro-chemical sensor to detect methadone at the modified glassy carbon electrode (β-MnO₂-NF/GCE). It has been found that oxidizing methadone is irreversible and shows a diffusion controlled procedure at the β-MnO₂-NF/GCE. Moreover, β-MnO₂-NF/GCE was considerably enhanced in the anodic peak current of methadone related to the separation of morphine and methadone overlapping voltammetric responses with probable difference of 510 mV. In addition, a linear increase has been observed between the catalytic peak currents gained by the differential pulse voltammetry (DPV) of morphine and methadone and their concentrations in the range between 0.1–200.0 μM and 0.1–250.0 μM, respectively. Furthermore, the limits of detection (LOD) for methadone and morphine were found to be 5.6 nM and 8.3 nM, respectively. It has been found that our electrode could have a successful application for detecting methadone and morphine in the drug dose form, urine, and saliva samples. Thus, this condition demonstrated that β-MnO₂-NF/GCE displays good analytical performances for the detection of methadone.

Electrochemical sensor based on β-MnO₂ nanoflower-modified glassy carbon electrode for the simultaneous detection of methadone and morphine was fabricated.

Synthesis of La2O3/MWCNT nanocomposite as the sensing element for electrochemical determination of theophylline

In this study, an electrochemical sensor was applied for the determination of theophylline, a bronchodilator drug, using differential pulse voltammetry (DPV). A glassy carbon electrode (GCE) surface was modified with the La2O3/MWCNT nanocomposite. The design is simplistic, efficient, greener and solvent-free microwave procedure for synthesizing La2O3/MWCNT nanocomposites. Fourier transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) techniques are used to characterize the features of the La2O3/MWCNT nanocomposite morphology and structure. The use of the modified sensor remarkably enhanced the current density and displayed a linear response ranging between 0.1 and 400.0 μM, with a limit of detection of 0.01 μM (S/N = 3). Using optimized conditions, the modified sensor demonstrated very good stability, selectivity and improved accuracy. Acceptable outputs were achieved in the analysis of real specimens, indicating that it is possible to use the modified sensor for practical analyses.

Recent advances in electroanalytical methods for the therapeutic monitoring of antiepileptic drugs: A comprehensive review

Frequency of seizures is often managed by a wide group of antiepileptic drugs. Regarding the pharmacokinetic variability, narrow targeted range, and difficulty of detecting signs of toxicity based on laboratory responses, therapeutic monitoring of antiepileptic drugs can play a pivotal role in optimizing the drug dosage. Electrochemical sensors and biosensors can facilitate analysis of these drugs due to their unique advantages such as fast analysis, sensitivity, selectivity, and low cost. This review article, for the first time, describes the recent advances in electrochemical sensors and biosensors developed for the analysis of antiepileptic drugs. General electrochemical measuring techniques and types of applied electrode substrates were described first. To simplify the work, various chemical and biological modifiers applied to improve the sensitivity and selectivity of the sensors were classified and explained briefly. Finally, the future prospective on the development of electrochemical platforms in the quantification of antiepileptic drugs will be presented.