Reliable and disposable quantum dot-based electrochemical immunosensor for aflatoxin B1 simplified analysis with automated magneto-controlled pretreatment system

Well-oriented immobilized immunoaffinity magnetic beads for detection of fumonisins in grains and feeds via pre-column automatic derivatization of high-performance liquid chromatography

In this study, based on the high-throughput automatic sample pretreatment with immunoaffinity magnetic beads with oriented immobilized antibodies, grain and feed fumonisin (FB) content was detected using pre-column automatic derivatization of high-performance liquid chromatography (HPLC). The FB capacity of well-oriented antibody immunoaffinity magnetic beads was 1.5-1.8 times that of magnetic beads with randomly fixed antibody. This pre-column automatic derivatization method using an autosampler can reduce error from manual injection and improve detection efficiency. The spiked recoveries for three different concentrations in maize, husked rice, and pig feed under optimized conditions were 84.6-104.0% (RSD < 9.3%). Our novel method was also applied to the analysis of FBs in 63 maize samples collected from the main maize-production regions in China. The results showed that as latitude increased, the contamination level of FBs tended to decrease. High temperature and high humidity are also more favorable for FB growth.

Development of a Novel Magnetic-Bead-Based Automated Strategy for Efficient and Low-Cost Sample Preparation for Ochratoxin A Detection Using Mycotoxin–Albumin Interaction

The mycotoxin ochratoxin A (OTA) is toxic to humans and frequently contaminates wine and beer. Antibodies are essential recognition probes for the detection of OTA. However, they have several drawbacks, such as high costs and difficulty in preparation. In this study, a novel magnetic-bead-based automated strategy for efficient and low-cost OTA sample preparation was developed. Human serum albumin, which is an economical and stable receptor based on the mycotoxin–albumin interaction, was adapted and validated to replace conventional antibodies to capture OTA in the sample. Ultra-performance liquid chromatography–fluorescence detection was used in combination with this preparation method for efficient detection. The effects of different conditions on this method were investigated. The recovery of OTA samples spiked at three different concentrations ranged from 91.2% to 102.1%, and the relative standard deviations (RSDs) were 1.2%–8.2% in wine and beer. For red wine and beer samples, the LODs were 0.37 and 0.15 µg/L, respectively. This reliable method overcomes the drawbacks of conventional methods and offers significant application prospects.

Recent Progress in Electrochemical Nano-Biosensors for Detection of Pesticides and Mycotoxins in Foods

Pesticide and mycotoxin residues in food are concerning as they are harmful to human health. Traditional methods, such as high-performance liquid chromatography (HPLC) for such detection lack sensitivity and operation convenience. Efficient, accurate detection approaches are needed. With the recent development of nanotechnology, electrochemical biosensors based on nanomaterials have shown solid ability to detect trace pesticides and mycotoxins quickly and accurately. In this review, English articles about electrochemical biosensors in the past 11 years (2011-2022) were collected from PubMed database, and various nanomaterials are discussed, including noble metal nanomaterials, magnetic metal nanoparticles, metal-organic frameworks, carbon nanotubes, as well as graphene and its derivatives. Three main roles of such nanomaterials in the detection process are summarized, including biomolecule immobilization, signal generation, and signal amplification. The detection targets involve two types of pesticides (organophosphorus and carbamate) and six types of mycotoxins (aflatoxin, deoxynivalenol, zearalenone, fumonisin, ochratoxin A, and patulin). Although significant achievements have been made in the evolution of electrochemical nano-biosensors, many challenges remain to be overcome.

Chromatographic methods for rapid aflatoxin B1 analysis in food: a review

Aflatoxin B1 (AFB1) is a mycotoxin and is the most carcinogenic of all known chemicals. In view of the AFB1 characteristics of widespread distribution, serious pollution, great harm to humans, and animals and difficult to remove, it is urgent to develop a convenient and sensitive detection method. Moreover, chromatographic test strips (CTSs) are a rapid detection technology that combines labeling technology with chromatography technology. CTSs have been widely used in the fields of environmental monitoring, medical diagnosis, and food safety analysis in recent years. Different from other immune assays, they have the advantages of short measuring time, low cost, high efficiency and no need for professionals to operate. In addition, the introduction of nanomaterials has laid a good foundation for the detection of high sensitivity, high specificity and high efficiency via CTSs. Herein, we tend to comprehensively introduce the applications of chromatographic methods in AFB1 detection and pay attention to the signal detection modes based on nanomaterials in antibody-based immunochromatographic strips (ICSs), such as colorimetric, fluorescent, chemiluminescent, and Raman scattering sensing. Some typical examples are also listed in this review. In the end, we make a summary and put forward prospects for the development of CTSs.

Target-responsive aptamer-cross-linked hydrogel sensors for the visual quantitative detection of aflatoxin B1 using exonuclease I-Triggered target cyclic amplification

•

An AFB₁-responsive aptamer-cross-linked hydrogel sensor was successfully constructed.

•

Dual signal amplification strategy with Encapsulation of enzymesand exonuclease I.

•

This method has great potential for AFB₁ detection in peanut oil.

•

The accuracy and consistency repeatability of this method are close to those of UPLC-HRMS.

For the on-site detection of aflatoxin B₁ (AFB₁), a DNA hydrogel was prepared as a biosensor substrate, while an AFB₁ aptamer was used as the recognition element. An AFB₁-responsive aptamer-cross-linked hydrogel sensor was constructed using an enzyme-linked signal amplification strategy; AFB₁ binds competitively to the aptamer, causing the hydrogel to undergo cleavage and release horseradish peroxidase (HRP). The addition of exonuclease I (ExoI) to the hydrogel causes the release of AFB₁ from the aptamer, promoting additional hydrogel cleavage to release more HRP, ultimately catalysing the reaction between 3,3′,5,5′-tetramethylbenzidine and H₂O₂. The hydrogel sensor exhibited an outstanding sensitivity (limit of detection, 4.93 nM; dynamic range, 0–500 nM), and its selectivity towards seven other mycotoxins was confirmed. The feasibility and reliability were verified by measuring the AFB₁ levels in peanut oil (recoveries, 89.59–95.66 %; relative standard deviation, <7%); the obtained results were comparable to those obtained by UPLC-HRMS.

Recent Progress on Techniques in the Detection of Aflatoxin B1 in Edible Oil: A Mini Review

Contamination of agricultural products and foods by aflatoxin B1 (AFB1) is becoming a serious global problem, and the presence of AFB1 in edible oil is frequent and has become inevitable, especially in underdeveloped countries and regions. As AFB1 results from a possible degradation of aflatoxins and the interaction of the resulting toxic compound with food components, it could cause chronic disease or severe cancers, increasing morbidity and mortality. Therefore, rapid and reliable detection methods are essential for checking AFB1 occurrence in foodstuffs to ensure food safety. Recently, new biosensor technologies have become a research hotspot due to their characteristics of speed and accuracy. This review describes various technologies such as chromatographic and spectroscopic techniques, ELISA techniques, and biosensing techniques, along with their advantages and weaknesses, for AFB1 control in edible oil and provides new insight into AFB1 detection for future work. Although compared with other technologies, biosensor technology involves the cross integration of multiple technologies, such as spectral technology and new nano materials, and has great potential, some challenges regarding their stability, cost, etc., need further studies.

Novel Sensor Approaches of Aflatoxins Determination in Food and Beverage Samples

The rapid quantification of toxins in food and beverage products has become a significant issue in overcoming and preventing many life-threatening diseases. Aflatoxin-contaminated food is one of the reasons for primary liver cancer and induces some tumors and cancer types. Advancements in biosensors technology have brought out different analysis methods. Therefore, the sensing performance has been improved for agricultural and beverage industries or food control processes. Nanomaterials are widely used for the enhancement of sensing performance. The enzymes, molecularly imprinted polymers (MIP), antibodies, and aptamers can be used as biorecognition elements. The transducer part of the biosensor can be selected, such as optical, electrochemical, and mass-based. This review explains the classification of major types of aflatoxins, the importance of nanomaterials, electrochemical, optical biosensors, and QCM and their applications for the determination of aflatoxins.

Development and Validation of an Automated Magneto-Controlled Pretreatment for Chromatography-Free Detection of Aflatoxin B1 in Cereals and Oils through Atomic Absorption Spectroscopy

A chromatography-free detection of aflatoxin B1 (AFB1) in cereals and oils through atomic absorption spectroscopy (AAS) has been developed using quantum dots and immunomagnetic beads. A magneto-controlled pretreatment platform for automatic purification, labeling, and digestion was constructed, and AFB1 detection through AAS was enabled. Under optimal conditions, this immunoassay exhibited high sensitivity for AFB1 detection, with limits of detection as low as 0.04 μg/kg and a linear dynamic range of 2.5–240 μg/kg. The recoveries for four different food matrices ranged from 92.6% to 108.7%, with intra- and inter-day standard deviations of 0.7–6.3% and 0.6–6.9%, respectively. The method was successfully applied to the detection of AFB1 in husked rice, maize, and polished rice samples, and the detection results were not significantly different from those of liquid chromatography-tandem mass spectrometry. The proposed method realized the detection of mycotoxins through AAS for the first time. It provides a new route for AFB1 detection, expands the application scope of AAS, and provides a reference for the simultaneous determination of multiple poisonous compounds (such as mycotoxins and heavy metals).

Developments in mycotoxin analysis: an update for 2020-2021

This review summarises developments published in the period from mid-2020 to mid-2021 on the analysis of a number of diverse matrices for mycotoxins. Notable developments in all aspects of mycotoxin analysis, from sampling and quality assurance/quality control of analytical results, to the various detection and quantitation technologies ranging from single mycotoxin biosensors to comprehensive instrumental methods are presented and discussed. The summary and discussion of this past year’s developments in detection and quantitation technology covers chromatography with targeted or non-targeted high resolution mass spectrometry, tandem mass spectrometry, detection other than mass spectrometry, biosensors, as well as assays using alternatives to antibodies. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination, as well as to address limitations of the presented methodologies.

Copper Oxide Nanoparticle-Based Immunosensor for Zearalenone Analysis by Combining Automated Sample Pre-Processing and High-Throughput Terminal Detection

A rapid and high-throughput fluorescence detection method for zearalenone (ZEN) based on a CuO nanoparticle (NP)-assisted signal amplification immunosensor was developed using an automated sample pretreatment and signal conversion system. CuO NPs with high stability and biocompatibility were used as carriers to immobilize anti-ZEN antibodies. The obtained CuO NP-anti-ZEN can maintain the ability to recognize target toxins and act as both a signal source and carrier to achieve signal conversion using automated equipment. In this process, target toxin detection is indirectly transformed to Cu²⁺ detection because of the large number of Cu²⁺ ions released from CuO NPs under acidic conditions. Finally, a simple and high-throughput fluorescence assay based on a fluorescent tripeptide molecule was employed to detect Cu²⁺, using a multifunctional microporous plate detector. A good linear relationship was observed between the fluorescence signal and the logarithm of ZEN concentration in the range of 16.0–1600.0 μg/kg. Additionally, excellent accuracy with a high recovery yield of 99.2–104.9% was obtained, which was concordant with the results obtained from LC-MS/MS of naturally contaminated samples. The CuO NP-based assay is a powerful and efficient screening tool for ZEN detection and can easily be modified to detect other mycotoxins.