Advances in electrochemiluminescence co-reaction accelerator and its analytical applications

Silica Nanochannels as Nanoreactors for the Confined Synthesis of Ag NPs to Boost Electrochemical Stripping Chemiluminescence of the Luminol-O2 System for the Sensitive Aptasensor

Herein, we, for the first time, synthesize silver nanoparticles (Ag NPs) within the nanochannels of amino group-functionalized vertically ordered mesoporous silica films (NH2-VMSF) and investigate their coreaction accelerator role in the luminol-dissolved oxygen (O2) electrochemical stripping chemiluminescence (ESCL) system. The synthesized Ag NPs are capable of electrocatalytic reduction of O2 to superoxide radicals, and meanwhile, sliver ions (Ag+) electrochemically stripped from Ag NPs can promote the amount of luminol anion radicals, generating the boosted ECL intensity of the luminol-dissolved O2 system. This proposed Ag NPs@NH2-VMSF on the indium tin oxide electrode was applied to construct the ESCL aptasensor for quantitative determination of prostate-specific antigen (PSA), yielding a low detection limit [0.19 pg/mL (S/N = 3)] and a broad linear dynamic range (1 pg/mL to 100 ng/mL). Furthermore, good analytical performance of PSA in serum with satisfactory recoveries and low relative standard deviation values is achieved by our developed ESCL aptasensor, rendering it a convenient and sensitive method for PSA determination in clinical applications and further broadening the strategy of ESCL techniques.

ECL resonance energy transfer-regulated "off-on" mode biosensor for the detection of miRNA-150-5p in triple negative breast cancer

MiRNAs played critical roles in triple negative breast cancer (TNBC) as potential biomarkers. Herein, an efficient signal "off-on" mode-biosensor based on electrochemiluminescence resonance energy transfer (ECL-RET) was successfully constructed for the miRNA-150-5p determination in TNBC. The ECL-RET regulated-sensing platform consisted of NiMn-LDHs nanoflowers, the artificially assembled phospholipid bilayers and hairpin DNA-labeled Eu-doped MoS2 QDs. Firstly, Eu-doped MoS2 QDs with high quantum efficiency were prepared as the ECL-RET donors. And NiMn-layer double hydroxides (LDHs) nanoflowers with wide UV-vis absorption spectra as the ECL-RET acceptors. Secondly, due to the hairpin DNA structure, the closed distance between ECL-RET donor-acceptor pair can quench the luminescence signal of Eu-doped MoS2 QDs. When miRNA-150-5p was captured, the hairpin DNA structure changed to a rodlike configuration and enlarged the distance between Eu-doped MoS2 QDs and NiMn-LDHs. As a result, the recovery of ECL signal can be observed as a signal "turn off-on" mode. Furthermore, the hydrophilicity of the lipid bilayer can reduce the nonspecific adsorption and improve the flexibility of the hairpin DNA efficiently. Therefore, based on the ECL-RET regulation strategy, the biosensor was employed to detect miRNA-150-5p from 10 fM to 1 nM with a detection limit of 1.5 fM. The constructed biosensor can effectively differentiate TNBC patient tumor and healthy breast fibroadenoma. The ECL-RET regulation strategy provided a new biosensing pathway for ultrasensitive detection of biomolecules and promoted the development of diagnosis and treatment of TNBC.

Enhancing the Electrochemiluminescence of Porphyrin via Crystalline Networks of Metal-Organic Frameworks for Sensitive Detection of Cardiac Troponin I

Porphyrins easily aggregate due to unfavorable π-π accumulation, causing luminescent quenching in the aqueous phase and subsequently reducing luminescent efficiency. It is a feasible way to immobilize porphyrin molecules through metal-organic framework materials (MOFs). In this study, 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) was introduced into the metal-organic skeleton (PCN-224) as a ligand. The result showed that the electrochemiluminescence (ECL) and photoluminescence (PL) efficiency of the MOF skeleton was 8.2 and 6.5 times higher than TCPP, respectively. Impressively, the periodic distribution of porphyrin molecules in the MOF framework can overcome the bottleneck of porphyrin aggregation, resulting in the organic ligand TCPP participating in the electron transfer reaction. Herein, based on the PCN-224, a sandwich-type ECL immunosensor was constructed for the determination of cardiac troponin I (cTnI). It provided sensitive detection of cTnI in the range of 1 fg/mL to 10 ng/mL with a detection limit of 0.34 fg/mL. This work not only innovatively exploited a disaggregation ECL (DIECL) strategy via the crystalline framework of MOF to enhance the PL and ECL efficiency of porphyrin but also provided a promising ECL platform for the ultrasensitive monitoring of cTnI.

Melamine-Ag with dual functions of electrochemiluminescence luminophore and coreactant accelerators: Construction of MIP/M-Ag@MoS2-QDs sensing platform for specific detection of thiabendazole

A novel self-enhancement molecularly imprinted electrochemiluminescence (ECL) sensor (MIP/M-Ag@MoS₂-QDs/GCE) was constructed to detect thiabendazole (TBZ) in food. Melamine was used as template to chelate Ag⁺ to prepare composite nanomaterials (M-Ag). M-Ag possesses both ECL properties and coreactant catalytic properties, which can realize the self-enhancement of ECL luminophore. MoS₂-QDs with excellent edge activity and electrochemical reaction catalytic activity were used to accelerate the reaction rate of the microsystem and further enhance the ECL intensity. The specific detection method of TBZ was established by investigating the ECL response mechanism and specific recognition mechanism of MIP/M-Ag@MoS₂-QDs/GCE. The ECL intensity was proportioned to the lg C_(TBZ) in the linear range 5 × 10^-8 mol L^-1-5 × 10^-5 mol L^-1 with a limit detection of 1.42 × 10^-8 mol L^-1. The satisfactory recovery rate (83.57%-101.03%) was obtained in sample analysis, which was in good agreement with the analysis result of HPLC.

Guest Molecular Assembly Strategy in Covalent Organic Frameworks for Electrochemiluminescence Sensing of Uranyl

The application of covalent organic frameworks (COFs) in electrochemiluminescence (ECL) is promising in environmental monitoring. Developing an emerging design strategy to expand the class of COF-based ECL luminophores is highly desirable. Here, a COF-based host-guest system was constructed through guest molecular assembly to deal with nuclear contamination analysis. The efficient charge transport network was formed by inserting an electron-withdrawing guest tetracyanoquinodimethane (TCNQ) into the open space of the COF host (TP-TBDA; TP = 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde and TBDA = 2,5-di(thiophen-2-yl)benzene-1,4-diamine) with an electron-donating property; the construction of the COF-based host-guest system (TP-TBDA@TCNQ) triggered the ECL emission of non-emitting TP-TBDA. Furthermore, the dense active sites in TP-TBDA were utilized to capture the target substance UO₂²⁺. The presence of UO₂²⁺ broke the charge-transfer effect in TP-TBDA@TCNQ, resulting in the weakening of the ECL signal, thus the established ECL system integrating the low detection limit with high selectivity monitors UO₂²⁺. This COF-based host-guest system provides a novel material platform for constructing late-model ECL luminophores and creates an opportunity for the vigorous ECL technology.

"Blocking-effect" detection strategy of clenbuterol by molecularly imprinted electrochemiluminescence sensor based on multiple synergistic excitation of AgNW luminophores signal with highly active BNQDs@AuNFs nanoscale co-reaction accelerator

A molecularly imprinted electrochemiluminescence sensor (MIECLS) is constructed to selectively detect clenbuterol (CLB) based on boron nitride quantum dots@gold nanoflowers/silver nanowires (BNQDs@AuNFs/AgNWs). The abundant amino and hydroxyl groups on the surface of the BNQDs generate an electrostatic self-assembly effect with the multi-tipped spatial structure of AuNFs, constituting a novel nanoscale co-reaction accelerator (NCRA) with high activity and large load capacity. An NCRA embedded in the network structure of the AgNW luminophores significantly promotes the reduction of peroxydisulfate (S₂O₈^2-) to sulfate anion radicals (SO₄^-•) through the catalysis of amino groups and boron radicals (B^•) and the electron acceleration of AuNFs while also reducing the reaction distance between SO₄^-• and AgNWs^-•, realizing the multiple synergistic amplification of the electrochemiluminescence (ECL) signal. Imprinted cavities in the molecularly imprinted polymers (MIPs) prepared by electropolymerization can generate a "blocking-effect" by recognizing CLB, realizing ECL signal quenching. Analytical results indicate that the established MIECLS detects CLB in a line concentration range of 0.5-50000 nM and detection limit of 0.00693 nM. The spiked recoveries are 85.90%-97.77%, with the relative standard deviations (RSD) under 5.1%, consistent with those of high-performance liquid chromatography (HPLC). This work demonstrates that an efficient NCRA can significantly enhance the output of the ECL signal in collaboration with the original luminophore, providing a new method to realize the ultra-detection of targeted substances by MIECLS.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Advances in electrochemiluminescence for single-cell analysis

Recent years have witnessed the emergence of innovative analytical methods with high sensitivity and spatiotemporal resolution that allowed qualitative and quantitative analysis to be carried out at single-cell and subcellular levels. Electrochemiluminescence (ECL) is a unique chemiluminescence of high-energy electron transfer triggered by electrical excitation. The ingenious combination of electrochemistry and chemiluminescence results in the distinct advantages of high sensitivity, a wide dynamic range and good reproducibility. Specifically, single-cell ECL (SCECL) analysis with excellent spatiotemporal resolution has emerged as a promising toolbox in bioanalysis for revealing individual cells' heterogeneity and stochastic processes. This review focuses on advances in SCECL analysis and bioimaging. The history and recent advances in ECL probes and strategies for system design are briefly reviewed. Subsequently, the latest advances in representative SCECL analysis techniques for bioassays, bioimaging and therapeutics are also highlighted. Then, the current challenges and future perspectives are discussed.

Determination of trichlorfon using a molecularly imprinted electrochemiluminescence sensor on multi-walled carbon nanotubes decorated with silver nanoparticles

Considering the limitations associated with existing methods for the detection of trace amounts of trichlorfon, this paper proposes a novel molecularly imprinted electrochemiluminescence (ECL) sensor for the detection of trichlorfon by utilizing the double enhancement effect of trichlorfon and Ag nanoparticles supported by multi-walled carbon nanotubes (MWCNTs/Ag NPs) in a luminol-H₂O₂ ECL system. Here, trichlorfon was electropolymerized on the surface of the MWCNT/Ag NP-modified gold nanoelectrode with o-phenylenediamine to prepare the molecularly imprinted polymer-based sensor. After eluting the trichlorfon, imprinted holes for the identification of trichlorfon were retained on the sensor, which were used as signal switches to obtain different ECL intensities through the adsorption of different concentrations of trichlorfon. The ECL signal of the sensitized luminol-H₂O₂ was doubly enhanced by the MWCNTs/Ag and trichlorfon, improving the sensitivity of the sensor. The trichlorfon concentration was positively correlated with the enhanced ECL intensity of the sensor in the range 5.0 × 10^-8-5.0 × 10^-11 mol L^-1, and the detection limit of trichlorfon was 3.9 × 10^-12 mol L^-1. Moreover, the proposed sensor was successfully applied to the detection of trichlorfon residues in real samples, and the recovery ranged between 91.8 and 109%. A molecularly imprinted electrochemiluminescence sensor for trichlorfon detection by utilizing the double enhancement effect of trichlorfon and Ag nanoparticles supported by multi-walled carbon nanotubes in a luminol-H₂O₂ ECL system. The dual enhancement of the ECL signal improved the sensitivity of the sensor.

The role of doping strategy in nanoparticle-based electrochemiluminescence biosensing

Doping plays a crucial role in electrochemiluminescence (ECL) due to the followings: (1) Modulation of electronic structure, alteration of the surface state of nanoparticles (NPs), providing effective protection from the surrounding environment, thereby leading to ECL emitters with exceptional properties including tunable spectra, high luminescence efficiency, low excitation potential, and good stability. (2) Employment of doped NPs as promising coreactant alternatives due to the presence of functional groups such as amines induced by NP doping. (3) Serving as novel co-reaction accelerators (CRAs) for ECL through doping induced high catalytic properties. (4) Behaving as excellent carriers to load ECL emitters, recognition elements, and catalysts due to doping-induced larger surface area, higher conductivity and better biocompatibility of NPs. As a consequence, doped NPs have aroused broad interest and found wide applications in various ECL sensing platforms. In this review, the current promising improvements, concepts, and excellent applications of doped NPs for ECL biosensing are addressed. We aim to bring to light the physicochemical characteristics of various doped NPs that endow them with appealing ECL performance, leading to diverse applications in biosensing.

Polythionine-mediated AgNWs-AuNPs aggregation conductive network: Fabrication of molecularly imprinted electrochemiluminescence sensors for selective capture of kanamycin

A molecularly imprinted electrochemiluminescence (ECL) sensor was developed for the specific detection of kanamycin in food using silver nanowires-gold nanoparticles (AgNWs-AuNPs) as a luminophore. Polythionine (pThi), another key component of the luminescent layer, can be used as an accelerator of the coreactant and can promote the formation of the AgNWs-AuNPs conductive network. In addition, molecularly imprinted polymers (MIPs) were polymerized on the AgNWs-AuNPs/pThi conductive network, which laid the foundation for the specific capture of kanamycin. The preparation and testing conditions of the sensor were optimized, and the performance was characterized. Under optimal conditions, the ECL intensity of AgNWs-AuNPs/pThi/MIP/GCE showed a good linear relationship (R² = 0.9956) with kanamycin concentration (1 × 10^-10-1 × 10^-6 M) and a low detection limit (3.14 × 10^-11 M, S/N = 3), showing satisfactory selectivity and stability. As proof, AgNWs-AuNPs/pThi/MIP/GCE was successfully used to detect kanamycin in actual samples with satisfactory recovery (83.27-94.13%), which was in good agreement with the results of HPLC-MS/MS (82.26-95.82%). The successful preparation of AgNWs-AuNPs/pThi/MIP/GCE in this experiment provided a new pathway for designing ECL components and constructing an ultrasensitive sensing platform in the field of hazardous substance detection.