A highly effective "turn-on" camphor-based fluorescent probe for rapid and sensitive detection and its biological imaging of Fe2

Fluorescent N-oxides: applications in bioimaging and sensing

N-Oxides, due to their zwitterionic nature and ability to form hydrogen bonds through the oxide ion, are highly water-soluble and widely used in biological and pharmacological studies. The N-oxide structural scaffold is introduced into molecules, enabling "turn-on" fluorescence via an intramolecular charge transfer (ICT) process. This process occurs when the N-O bond is cleaved, either through an enzymatic reaction under hypoxic conditions or by using Fe(II), which allows rapid and selective detection of Fe(II) at nanomolar concentrations both in vitro and in vivo. This review focuses on the literature published between 2010 and 2024, particularly emphasising N-oxide fluorophores and their applications in hypoxic cell lines, Fe(II) detection, and bioimaging.

Development of sensitive biomass xylan-based carbon dots fluorescence sensor for quantification detection Cu2+ in real water and soil

Copper ions (Cu2+) pose significant risks to both human health and the environment as they tend to accumulate in soil and water. To address this issue, an innovative method using biomass-derived fluorescent carbon dots (D-CDs) synthesized via a hydrothermal process, with xylan serving as the carbon source was developed. D-CDs solution exhibited remarkable sensitivity and selectivity as a fluorescence sensor for Cu2+, boasting a low detection threshold of 0.64 μM. In order to facilitate real-time monitoring of Cu2+, solid-state fluorescent nanofiber membrane (NFD-CDs) through electrospinning was engineered. Additionally, D-CDs demonstrated successful Cu2+ detection in various real water samples, including those sourced from Xuanwu Lake, the Yangtze River, tap water, and bottled water, with accurate recovery rates observed. As a result, this research introduces a dual-mode analytical system for onsite detection of Cu2+ in real scenarios. By harnessing biomass-derived fluorescent CDs materials and solid-state fluorescence sensors, this approach offers a promising solution for addressing the challenges associated with Cu2+ contamination.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Poly-β-cyclodextrin strengthen Pr6O11 porous oxidase mimic for dual-channel visual recognition of bioactive cysteine and Fe2

To conveniently monitor bioactive cysteine (Cys) and Fe2+ in practice, a kind of poly-β-cyclodextrin strengthen praseodymium oxide (Pr6O11) porous oxidase mimic (p-β-CD@Pr6O11) was constructed by virtue of the strong coordination between nano Pr6O11 and poly-β-cyclodextrin substrate. After its microstructure and physicochemical property were characterized in detail, it was noted that porous p-β-CD@Pr6O11 exhibited excellent enzyme-like catalytic activity to accelerate the oxidation of 3,3',5,5,'-tetramethylbanzidine (TMB) and 2,2'-azinobis (3-ethylbenzo-thiazoline-6-sulfonic acid) ammonium salt (ABTS) with significant color-enhancement effect in the air. Based on the signal amplification, trace Cys could exclusively deteriorate the UV-vis absorbance at 653 nm of p-β-CD@Pr6O11-TMB and Fe2+ alter the one at 729 nm of p-β-CD@Pr6O11-ABTS with visual color changes. Under the optimized conditions, the proposed p-β-CD@Pr6O11-TMB and p-β-CD@Pr6O11-ABTS systems were successfully applied for dual-channel monitoring of Cys in Cys capsules and fetal bovine serum and Fe2+ in agricultural products with quite low detection limits, i.e., 7.8×10-9 mol·L-1 for Cys and 6.93×10-8 mol·L-1 (S/N=3) for Fe2+, respectively. The synergetic-enhancement detection mechanisms to Cys and Fe2+ were also proposed.

A rationally designed fluorescent probe for sulfur dioxide and its derivatives: applications in food analysis and bioimaging

Exogenous sulfur dioxide (SO2) and its derivatives (SO32-/HSO3-) have been extensively utilized in food preservation and endogenous SO2 is recognized as a significant gaseous signaling molecule that can mediate various physiological processes. Overproduction and/or extensive intake of these species can trigger allergic reactions and even tissue damage. Therefore, it is highly desirable to monitor SO2 and its derivatives effectively and quantitatively both in vitro and in vivo. Herein, a new mitochondria-targeted fluorescent probe (PIB) had been constructed, which could ratiometrically recognize SO2 and its derivatives with excellent sensitivity (DL = 15.9 nM) and a fast response time (200 s). The obtained high selectivity and good adaptability of this SO2-specific probe in a wide pH range (6.5-10.0) allowed for quantitatively tracking of SO2 and its derivatives in real food samples (granulated sugar, crystal sugar, and white wine). In addition, PIB could locate at mitochondrion and was capable of imaging exogenous/endogenous SO2 in the cells and zebrafish. In particular, our findings represented one of the rare examples that have demonstrated endogenous SO2 is closely related with the apoptosis of cells. Importantly, probe PIB was successfully employed for in situ metabolic localization in mouse organs, implying the potential applications of our probe in further exploration on SO2-releated pathological and physiological processes.

Biomass-based indole derived composited with cotton cellulose fiber integrated as sensitive fluorescence platform for NH3 detection and monitoring of seafood spoilage

Herein, an indole-derived water-soluble fluorescence nanomaterial and biomass-based cellulose filter paper integrated as solid-state fluorescence platform (H2-FP) for seafood spoilage detection was prepared. H2 exhibits high fluorescence stability and good biocompatibility with green beans, onion tissues, blood and zebrafish, which proving that H2 has a wide range of application scenarios. Further, H2-FP with effective, solid-state fluorescence, portable, and reusable characteristics is nanoengineered for NH₃ quantitative and qualitative detection (DOL = 2.6 ppm). Then, H2-FP has been successfully used to monitor NH₃ release in the seafood spoilage process at various storage time (4 °C and 25 °C). More importantly, fluorescence color of H2-FP is integrated smartphone are converted to digital values through RGB channels and successfully used to visualize semi-quantitative recognition of NH₃. This sensing fluorescence platform integrated with smartphone furnishes an effective fabrication strategy and broad prospects for explore various biomass-based materials for sensing NH₃ change in biological and environmental samples.

Ratiometric fluorescence nanoprobe based on carbon dots and terephthalic acid for determining Fe2+ in environmental samples

A ratiometric fluorescent nanoprobe using carbon dots (CDs) and involving oxidation of terephthalic acid (TPA) induced by hydroxyl radicals (·OH) was developed for sensitively and selectively determining Fe²⁺ ions. When Fe²⁺ ions are added to the TPA@CDs/H₂O₂ system, ·OH produced through the Fenton reaction oxidizes the non-fluorescent TPA to give 2-hydroxyl terephthalic acid, which fluoresces at 423 nm when excited at 286 nm. The ·OH and Fe³⁺ produced quench CD fluorescence at 326 nm. The 2-hydroxyl terephthalic acid to CD fluorescence intensity ratio linearly increased as the Fe²⁺ concentration increased in the range 0.5-50 μM, and the detection limit was 0.25 μM. The new assay is very selective because it involves dual-emission reverse change ratio fluorescence sensing, which can exclude matrix effects. The new nanoprobe was used to determine Fe²⁺ concentrations in real water samples, and the recoveries were found to be acceptable. Schematic of the ratiometric fluorometric method for determining Fe²⁺ based on CDs and TPA.

Recent Progress in Fluorescent Probes For Metal Ion Detection

All forms of life have absolute request for metal elements, because metal elements are instrumental in various fundamental processes. Fluorescent probes have been widely used due to their ease of operation, good selectivity, high spatial and temporal resolution, and high sensitivity. In this paper, the research progress of various metal ion (Fe3+,Fe2+,Cu2+,Zn2+,Hg2+,Pb2+,Cd2+) fluorescent probes in recent years has been reviewed, and the fluorescence probes prepared with different structures and materials in different environments are introduced. It is of great significance to improve the sensing performance on metal ions. This research has a wide prospect in the application fields of fluorescence sensing, quantitative analysis, biomedicine and so on. This paper discusses about the development and applications of metal fluorescent probes in future.