Aromatic character of Cabernet Sauvignon and Merlot wines produced with grapes dried under controlled conditions

Profile of red wine partially dealcoholized with a membrane-based technique and strategies to mitigate the loss of volatile compounds

In recent years, climate change has led to higher grape must sugar content and, consequently, increased alcohol by volume. Evaporative or pertraction is a common method for post-fermentation ethanol removal from wines, but it selectively removes some less polar volatile compounds along with ethanol. To mitigate volatile substance loss, this study investigates blending of the red wine (Marzemino-Cabernet blend) with obtained dealcoholized samples from it by industrial evaporative pertraction system, while maintaining the final product within a two-percentage-point reduction in ethanol. Thus MIX 1 and MIX 2 blends were prepared, reducing the ABV of the initial wine (12.5% alcohol by volume) to 10.5% and 9.5%. Chemical analyses highlighted that most alcohols, acetates, and ethyl esters of fatty acids decreased with alcohol by volume reduction. However, compounds with polar groups (acetoin and acetovanillone), C13-norisoprenoids, and certain lactones showed increasing trends. Sensory analysis indicated high scores for sweetness and smoothness in the blended wines, with a decrease in acidic taste. Floral scents notably increased, particularly in MIX 2, closely resembling the initial wine's sensory profile. The blending of initial wine with appropriately dealcoholized wine samples has proven to be an effective strategy for preserving bouquet and color of dealcoholized wines. This approach broadens the consumer base by catering to people who prefer low-alcohol options, have dietary restrictions, or are health-conscious, but who still wish to savor wines with aromatic quality rather than a flat taste. This strategy is crucial in the wine industry as it successfully addresses technical challenges and ensures economic viability.

Aroma enhancement of blueberry wine by postharvest partial dehydration of blueberries

Blueberries with 20%, 30%, and 40% weight loss were used for winemaking, aiming to explore the feasibility of applying postharvest dehydration for improving blueberry wine aroma. Postharvest dehydration decreased the titratable acidity of blueberries and their resultant wines. Total anthocyanins and phenols in blueberries with 30% weight loss were increased by 25.9% and 16.1%, respectively, due to concentration effects, while further dehydration resulted in a decline. Similar trends were observed in blueberry wines. Moderate postharvest dehydration increased total terpenes, benzeneacetaldehyde and phenylethyl alcohol, ethyl butanoate, methyl salicylate, 1-hexanol, and γ-nonalactone content in blueberries and wines, which could enhance the floral, fruity, and sweet notes of blueberry wines. Wines made from blueberries under severe dehydration (40% weight loss) had the lowest overall aroma score, which was related to the higher content of 4-ethyl-phenol and 4-ethylguaiacol. In conclusion, moderate postharvest dehydration benefited the aroma enhancement of blueberry wine.

Postharvest Water Loss of Wine Grape: When, What and Why

In postharvest science, water loss is always considered a negative factor threatening fruit and vegetable quality, but in the wine field, this physical process is employed to provide high-quality wine, such as Amarone and Passito wines. The main reason for this is the significant metabolic changes occurring during wine grape water loss, changes that are highly dependent on the specific water loss rate and level, as well as the ambient conditions under which grapes are kept to achieve dehydration. In this review, hints on the main techniques used to induce postharvest wine grape water loss and information on the most important metabolic changes occurring in grape berries during water loss are reported. The quality of wines produced from dried/dehydrated/withered grapes is also discussed, together with an update on the application of innovative non-destructive techniques in the wine sector. A wide survey of the scientific papers published all over the world on the topic has been carried out.

Recent advances in postharvest technology of the wine grape to improve the wine aroma

Postharvest techniques are widely used for the handling and storage of fresh horticultural crops. Some of these techniques are interesting for use with wine grapes to improve the quality of wine. In this review, we consider the postharvest techniques that are already commercially used in the wine sector and others that may be significant in inducing or extracting the aroma from grapes to produce high-quality wines. Precooling consists of rapidly lowering the grape temperature, which allows the preservation/increase of volatile organic compounds (VOCs). We also discuss sustainability. Partial dehydration consists of the partial removal of water from grapes, and if a suitable environment is adopted it can be used to produce and extract berry VOCs. As a solid, carbon dioxide is used in wine processing for the rapid cooling of grapes and, as a gas, it is used for carbonic maceration. Ozone has been used for sanitation purposes in wineries for a long time, but more recently it has been used to produce wine without sulfite addition and to increase the aromatic quality of wine grapes. Ethylene application is not used commercially for wine grapes, but promising results in terms of phenolic extraction and aromatic changes in grapes are discussed. A comparison among the proposed techniques is reported in terms of grape aromatic quality and process features. The proposed techniques could help a winemaker to maintain or induce aromatic compounds in grape berries before the vinification process. The choice depends on the desired wine and economic consistency. © 2018 Society of Chemical Industry.

Feasibility of using integrated fingerprinting, profiling and chemometrics approach to understand (bio) chemical changes throughout commercial red winemaking: A case study on Merlot

This study assessed the feasibility of using a multiplatform approach; integrating untargeted fingerprinting of volatiles and targeted profiling of phenolic and oenological attributes (soluble solids, pH, titratable acidity and colour properties) coupled with chemometrics to understand complex (bio) chemical reactions occurring during Merlot red winemaking. The changes were investigated at three winemaking stages, starting from pre-maceration (PM), maceration-alcoholic fermentation (MAF) up to completion of malolactic fermentation (MLF). Merlot musts at PM were characterised by lighter colour and higher amount of green aroma-related volatiles. Completion of MAF led to increased extraction of anthocyanins, flavonols, and stilbenes, resulting in a more intense and darker fermenting juice. Furthermore, development of yeast-fermentation associated volatiles such as esters and alcohols was observed at this stage. The final wine, when MLF was completed, was rich in phenolic acids, esters, alcohols, and terpenes. The multiplatform analytical approach was effective to unravel the complex reactions throughout Merlot winemaking process and find relevant markers, which could help to predict expected quality attributes in the finished wine.