Dicalcium Phosphate Anhydrous: An Appropriate Bioceramic in Regeneration of Critical-Sized Radial Bone Defects in Rats

Anti-Oxidant Multi-Functionalized Materials: Strontium-Substituted Monetite and Brushite as Delivery Systems for Curcumin

Curcumin has numerous biological activities and pharmaceutical applications related to its ability to inhibit reactive oxygen species. Herein, strontium-substituted monetite (SrDCPA) and strontium-substituted brushite (SrDCPD) were synthesized and further functionalized with curcumin with the aim to develop materials that combine the anti-oxidant properties of the polyphenol, the beneficial role of strontium toward bone tissue, and the bioactivity of calcium phosphates. Adsorption from hydroalcoholic solution increases with time and curcumin concentration, up to about 5-6 wt%, without affecting the crystal structure, morphology, and mechanical response of the substrates. The multi-functionalized substrates exhibit a relevant radical scavenging activity and a sustained release in phosphate buffer. Cell viability, morphology, and expression of the most representative genes were tested for osteoclast seeded in direct contact with the materials and for osteoblast/osteoclast co-cultures. The materials at relatively low curcumin content (2-3 wt%) maintain inhibitory effects on osteoclasts and support the colonization and viability of osteoblasts. The expressions of Alkaline Phosphatase (ALPL), collagen type I alpha 1 chain (COL1A1), and osteocalcin (BGLAP) suggest that curcumin reduces the osteoblast differentiation state but yields encouraging osteoprotegerin/receptor activator for the NFkB factor ligand (OPG/RANKL) ratio.

Calcium Orthophosphate (CaPO4)-Based Bioceramics: Preparation, Properties, and Applications

Various types of materials have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A short time later, such synthetic biomaterials were called bioceramics. Bioceramics can be prepared from diverse inorganic substances, but this review is limited to calcium orthophosphate (CaPO4)-based formulations only, due to its chemical similarity to mammalian bones and teeth. During the past 50 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the CaPO4-based implants would remain biologically stable once incorporated into the skeletal structure or whether they would be resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed, and such formulations became an integrated part of the tissue engineering approach. Now, CaPO4-based scaffolds are designed to induce bone formation and vascularization. These scaffolds are usually porous and harbor various biomolecules and/or cells. Therefore, current biomedical applications of CaPO4-based bioceramics include artificial bone grafts, bone augmentations, maxillofacial reconstruction, spinal fusion, and periodontal disease repairs, as well as bone fillers after tumor surgery. Prospective future applications comprise drug delivery and tissue engineering purposes because CaPO4 appear to be promising carriers of growth factors, bioactive peptides, and various types of cells.

Monetite vs. Brushite: Different Influences on Bone Cell Response Modulated by Strontium Functionalization

Monetite and brushite are regarded with increasing interest for the preparation of biomaterials for applications in the musculoskeletal system. Herein, we investigated the influence of strontium substitution in the structures of these two phosphates on bone cell response. To achieve this aim, co-cultures of human primary osteoclasts and human osteoblast-like MG63 cells were tested on strontium-substituted monetite and strontium-substituted brushite, as well as on monetite and brushite, as controls. In both structures, strontium substitution for calcium amounted to about 6 at% and provoked enlargement of the cell parameters and morphologic variations. Cumulative release in physiological solution increased linearly over time and was greater from brushite (up to about 160 and 560 mg/L at 14 days for Sr and Ca, respectively) than from monetite (up to about 90 and 250 mg/L at 14 days for Sr and Ca, respectively). The increasing viability of osteoblast-like cells over time, with the different expression level of some typical bone markers, indicates a more pronounced trigger toward osteoblast differentiation and osteoclast inhibition by brushite materials. In particular, the inhibition of cathepsin K and tartrate-resistant acid phosphatase at the gene and morphological levels suggests strontium-substituted brushite can be applied in diseases characterized by excessive bone resorption.

The Impact of Nano-Crystal Hydroxyapatites on the Regeneration of Bone Defects

Calcium hydroxyapatite is a widely used material for replacing bone defects. However, the effectiveness of nano-crystalline calcium hydroxyapatite produced from eggshells in the replacement of bone defects has not been investigated yet. The study aimed to evaluate the effectiveness of using nano-crystalline calcium hydroxyapatite made from eggshell for the healing of bone defect of the femur in rats. Forty-eight (n=48) rats underwent a surgical procedure to simulate femoral defect. The animals were sub-divided into 4 groups (each with n=12) depending on the methods of bone defect replacement: I control group (CG) (without bone defect replacement); II intervention group (the bone defect was replaced by PRP (PRP); III intervention group (the bone defect was replaced by nano-crystalline hydroxyapatite obtained from eggshell) (HA) and IV interventional group (the bone defect was replaced by a combination of hydroxyapatite and PRP) (HA+PRP). The degree of effectiveness of studied methods was assessed using radiological (on the 14th day), histological (on the 61st day), and biomechanical analysis (on the 61st day). According to radiographic data, the CG group had the lowest level of bone regeneration after 14 days (4.2 ±1.7%). In the HA + PRP group, the level of bone regeneration was 22.1±7.1 %, which was higher in comparison with the rates of consolidation of bone defects in the HA group (20.7± 9.3) (p = 0.023). According to the histo-morphometry data, the rates of bone tissue regeneration in the PRP group (19.8 ±4.2%) were higher in comparison with the CG group (12.7 ± 7.3%), (p>0.05). In the HA+PRP group, bone regeneration rates (48.9±9.4 %) were significantly higher (p=0.001) than in the HA group (35.1±9.8%). According to the results of biomechanical assessment under the maximum stress (121.0722), the maximum bending deformation of the contralateral bone without defect was 0.028746, which was higher than the indicators of the HA+PRP group, where at the maximum stress (90.67979) the bending deformation was 0.024953 (p>0.05). Compared to CG, PRP, and HA, biomechanical bone strength was significantly higher in the HA + PRP group (p≤0.01). At the maximum stress (51.81391), the maximum bending strain in the CG group was 0.03869, which was lower than in the PRP group, where the maximum stress and bending strain were 59.45824 and 0.055171, respectively (p>0.05). However, the bone strength of the HA group was statistically significantly higher compared to the CG and PRP groups (p<0.01).

The results demonstrated the effectiveness of the use of nanocrystalline calcium hydroxyapatite obtained from eggshell in the healing of a bone defect. The best results were observed in the group of the combined use of nano-crystalline calcium hydroxyapatite and PRP.

Bone physiological microenvironment and healing mechanism: Basis for future bone-tissue engineering scaffolds

Bone-tissue defects affect millions of people worldwide. Despite being common treatment approaches, autologous and allogeneic bone grafting have not achieved the ideal therapeutic effect. This has prompted researchers to explore novel bone-regeneration methods. In recent decades, the development of bone tissue engineering (BTE) scaffolds has been leading the forefront of this field. As researchers have provided deep insights into bone physiology and the bone-healing mechanism, various biomimicking and bioinspired BTE scaffolds have been reported. Now it is necessary to review the progress of natural bone physiology and bone healing mechanism, which will provide more valuable enlightenments for researchers in this field. This work details the physiological microenvironment of the natural bone tissue, bone-healing process, and various biomolecules involved therein. Next, according to the bone physiological microenvironment and the delivery of bioactive factors based on the bone-healing mechanism, it elaborates the biomimetic design of a scaffold, highlighting the designing of BTE scaffolds according to bone biology and providing the rationale for designing next-generation BTE scaffolds that conform to natural bone healing and regeneration.

Biodegradable materials for bone defect repair

Compared with non-degradable materials, biodegradable biomaterials play an increasingly important role in the repairing of severe bone defects, and have attracted extensive attention from researchers. In the treatment of bone defects, scaffolds made of biodegradable materials can provide a crawling bridge for new bone tissue in the gap and a platform for cells and growth factors to play a physiological role, which will eventually be degraded and absorbed in the body and be replaced by the new bone tissue. Traditional biodegradable materials include polymers, ceramics and metals, which have been used in bone defect repairing for many years. Although these materials have more or fewer shortcomings, they are still the cornerstone of our development of a new generation of degradable materials. With the rapid development of modern science and technology, in the twenty-first century, more and more kinds of new biodegradable materials emerge in endlessly, such as new intelligent micro-nano materials and cell-based products. At the same time, there are many new fabrication technologies of improving biodegradable materials, such as modular fabrication, 3D and 4D printing, interface reinforcement and nanotechnology. This review will introduce various kinds of biodegradable materials commonly used in bone defect repairing, especially the newly emerging materials and their fabrication technology in recent years, and look forward to the future research direction, hoping to provide researchers in the field with some inspiration and reference.

The Impact of Bioceramic Scaffolds on Bone Regeneration in Preclinical In Vivo Studies: A Systematic Review

Bioceramic scaffolds are appealing for alveolar bone regeneration, because they are emerging as promising alternatives to autogenous and heterogenous bone grafts. The aim of this systematic review is to answer to the focal question: in critical-sized bone defects in experimental animal models, does the use of a bioceramic scaffolds improve new bone formation, compared with leaving the empty defect without grafting materials or using autogenous bone or deproteinized bovine-derived bone substitutes? Electronic databases were searched using specific search terms. A hand search was also undertaken. Only randomized and controlled studies in the English language, published in peer-reviewed journals between 2013 and 2018, using critical-sized bone defect models in non-medically compromised animals, were considered. Risk of bias assessment was performed using the SYRCLE tool. A meta-analysis was planned to synthesize the evidence, if possible. Thirteen studies reporting on small animal models (six studies on rats and seven on rabbits) were included. The calvarial bone defect was the most common experimental site. The empty defect was used as the only control in all studies except one. In all studies the bioceramic materials demonstrated a trend for better outcomes compared to an empty control. Due to heterogeneity in protocols and outcomes among the included studies, no meta-analysis could be performed. Bioceramics can be considered promising grafting materials, though further evidence is needed.

In vitro and in vivo investigation of PLA/PCL scaffold coated with metformin-loaded gelatin nanocarriers in regeneration of critical-sized bone defects

Large bone defects constitute a major challenge in bone tissue engineering and usually fail to heal due to the incomplete differentiation of recruited mesenchymal stem cells (MSCs) into osteogenic precursor cells. As previously proposed, metformin (MET) induces differentiation of MSCs into osteoblastic lineages in vitro. We fabricated a Poly (lactic acid) and Polycaprolactone (PLA/PCL) scaffold to deliver metformin loaded gelatin nanocarriers (MET/GNs) to critical-sized calvarial bone defects in a rat model. The scaffolds were evaluated regarding their morphology, porosity, contact angle, degradation rate, blood compatibility, biomechanical, cell viability and their osteogenic differentiation. In animal study, the defects were filled with autograft, scaffolds and a group was left empty. qRT-PCR analyses showed the expression level of osteogenic and angiogenic markers considerably increased in MET/GNs-PLA/PCL. The in vivo results showed that MET/GNs-PLA/PCL improved bone ingrowth, angiogenesis and defect reconstruction. Our results represent the applicability of MET/GNs-PLA/PCL for successful bone regeneration.

Healing potentials of polymethylmethacrylate bone cement combined with platelet gel in the critical-sized radial bone defect of rats

Polymethylmethacrylate (PMMA) is the most commonly used filler material that lacks biological properties and osteoconductivity or osteoinductivity. Platelet gel (PG) is a typical source of growth factors, cytokines and molecules efficient for bone formation and remodeling. The aim of this study was to evaluate bone healing and regeneration of bone defect in rat model by combining PMMA with PG. A total of 50 defects were created in the diaphysis of the radii of 25 male Sprague-Dawley rats. These defects were randomly divided into five groups (n = 10 defects for each group) and treated by autograft, plain PMMA, PG and PMMA-PG or left untreated. The rats were examined clinically and radiologically during the experiment and also after euthanasia at the 8^th post-operative week, the healed defects were evaluated by gross morphology, histopathology, histomorphometry, computed tomography, scanning electron microscopy and biomechanical testing. PG could function as efficiently as autograft in promoting bone healing of the radial bones. Additionally, bone formation, and densities of cartilaginous and osseous tissues in the defects treated with autograft, PG and PMMA-PG were more satisfactory than the untreated and PMMA treated defects. Compared with the PMMA-PG implant, more PMMA residuals remained in the defect area and induced more intense inflammatory reaction. In conclusion, addition of PG could improve the bone regenerative properties of PMMA bone cement compared with PMMA alone in vivo. Therefore, the PG-PMMA can be proposed as a promising option to increase regenerative potential of PMMA, particularly when it is used as fixator, filler or adhesive in the dentistry, neurosurgery and bone tissue engineering applications.

Reconstruction of radial bone defect in rat by calcium silicate biomaterials

AIMS

Despite many attempts, an appropriate therapeutic method has not yet been found to enhance bone formation, mechanical strength and structural and functional performances of large bone defects. In the present study, the bone regenerative potential of calcium silicate (CS) biomaterials combined with chitosan (CH) as calcium silicate/chitosan (CSC) scaffold was investigated in a critical radial bone defect in a rat model.

MAIN METHODS

The bioimplants were bilaterally implanted in the defects of 20 adult Sprague-Dawley rats. The rats were euthanized and the bone specimens were harvested at the 56th postoperative day. The healed radial bones were evaluated by three-dimensional CT, radiology, histomorphometric analysis, biomechanics, and scanning electron microscopy.

KEY FINDINGS

The XRD analysis of the CS biomaterial showed its similarity to wollastonite (β-SiCO₃). The degradation rate of the CSC scaffold was much higher and it induced milder inflammatory reaction when compared to the CH alone. More bone formation and higher biomechanical performance were observed in the CSC treated group in comparison with the CH treated ones in histological, CT scan and biomechanical examinations. Scanning electron microscopic observation demonstrated the formation of more hydroxyapatite crystals in the defects treated with CSC.

SIGNIFICANCE

This study showed that the CSC biomaterials could be used as proper biodegradable materials in the field of bone reconstruction and tissue engineering.