The use of genetically modified Saccharomyces cerevisiae strains in the wine industry

Adaptive Laboratory Evolution of Yeasts for Aroma Compound Production

Aroma compounds are important in the food and beverage industry, as they contribute to the quality of fermented products. Yeasts produce several aroma compounds during fermentation. In recent decades, production of many aroma compounds by yeasts obtained through adaptive laboratory evolution has become prevalent, due to consumer demand for yeast strains in the industry. This review presents general aspects of yeast, aroma production and adaptive laboratory evolution and focuses on the recent advances of yeast strains obtained by adaptive laboratory evolution to enhance the production of aroma compounds.

Ecological Distribution and Oenological Characterization of Native Saccharomyces cerevisiae in an Organic Winery

The relation between regional yeast biota and the organoleptic characteristics of wines has attracted growing attention among winemakers. In this work, the dynamics of a native Saccharomyces cerevisiae population was investigated in an organic winery. In this regard, the occurrence and the persistence of native S. cerevisiae were evaluated in the vineyard and winery and during spontaneous fermentation of two nonconsecutive vintages. From a total of 98 strains, nine different S. cerevisiae biotypes were identified that were distributed through the whole winemaking process, and five of them persisted in both vintages. The results of the oenological characterization of the dominant biotypes (I and II) show a fermentation behavior comparable to that exhibited by three common commercial starter strains, exhibiting specific aromatic profiles. Biotype I was characterized by some fruity aroma compounds, such as isoamyl acetate and ethyl octanoate, while biotype II was differentiated by ethyl hexanoate, nerol, and β-damascenone production also in relation to the fermentation temperature. These results indicate that the specificity of these resident strains should be used as starter cultures to obtain wines with distinctive aromatic profiles.

Adaptive Laboratory Evolution of Native Torulaspora delbrueckii YCPUC10 With Enhanced Ethanol Resistance and Evaluation in Co-inoculated Fermentation

Torulaspora delbrueckii is a yeast species typically present in the early stages of the fermentation process. T. delbrueckii positively modifies the aromatic properties of wines. However, its contribution to the final quality of the wine is restricted by its low tolerance to ethanol. T. delbrueckii is capable of fermenting and tolerating an ethanol concentration ranging from 7.4% (v/v) to slightly higher than 9% (v/v). For this reason, it cannot complete fermentation, when alcohol reach levels higher than 12% (v/v), limiting their use in the industry. The objective of this work was to obtain new variants of T. delbrueckii with improved resistance to ethanol through adaptive laboratory evolution. Variants capable of tolerating ethanol levels of 11.5% (v/v) were obtained. These presented improved kinetic parameters, and additionally showed an increase in resistance to SO₂ in ethanol compared to the original strain. Co-inoculated fermentations were performed with the original strain (FTd/Sc) and with the evolved strain (FTdF/Sc), in addition to a control fermentation using only Saccharomyces cerevisiae EC1118 (FSc). The results obtained show that FTdF/Sc present higher levels of 2-Ethylhexanol, compared to FTd/Sc and FSc. Furthermore, FTdF/Sc presents higher levels of total alcohols, total aldehydes, total phenolic derivatives, and total sulfur compounds with significant differences with FSc. These results provide a T. delbrueckii YCPUC10-F yeast with higher resistance to ethanol, which can be present throughout the fermentation process and be used in co-inoculated fermentations. This would positively impact the performance of T. delbrueckii by allowing it to be present not only in the early stages of fermentation but to remain until the end of fermentation.

Differential proteomic analysis by SWATH-MS unravels the most dominant mechanisms underlying yeast adaptation to non-optimal temperatures under anaerobic conditions

Elucidation of temperature tolerance mechanisms in yeast is essential for enhancing cellular robustness of strains, providing more economically and sustainable processes. We investigated the differential responses of three distinct Saccharomyces cerevisiae strains, an industrial wine strain, ADY5, a laboratory strain, CEN.PK113-7D and an industrial bioethanol strain, Ethanol Red, grown at sub- and supra-optimal temperatures under chemostat conditions. We employed anaerobic conditions, mimicking the industrial processes. The proteomic profile of these strains in all conditions was performed by sequential window acquisition of all theoretical spectra-mass spectrometry (SWATH-MS), allowing the quantification of 997 proteins, data available via ProteomeXchange (PXD016567). Our analysis demonstrated that temperature responses differ between the strains; however, we also found some common responsive proteins, revealing that the response to temperature involves general stress and specific mechanisms. Overall, sub-optimal temperature conditions involved a higher remodeling of the proteome. The proteomic data evidenced that the cold response involves strong repression of translation-related proteins as well as induction of amino acid metabolism, together with components related to protein folding and degradation while, the high temperature response mainly recruits amino acid metabolism. Our study provides a global and thorough insight into how growth temperature affects the yeast proteome, which can be a step forward in the comprehension and improvement of yeast thermotolerance.

Metabolic Engineering of Wine Strains of Saccharomyces cerevisiae

Modern industrial winemaking is based on the use of starter cultures of specialized wine strains of Saccharomyces cerevisiae yeast. Commercial wine strains have a number of advantages over natural isolates, and it is their use that guarantees the stability and reproducibility of industrial winemaking technologies. For the highly competitive wine market with new demands for improved wine quality, it has become increasingly critical to develop new wine strains and winemaking technologies. Novel opportunities for precise wine strain engineering based on detailed knowledge of the molecular nature of a particular trait or phenotype have recently emerged due to the rapid progress in genomic and "postgenomic" studies with wine yeast strains. The review summarizes the current achievements of the metabolic engineering of wine yeast, the results of recent studies and the prospects for the application of genomic editing technologies for improving wine S. cerevisiae strains.

Homologous Recombination: A GRAS Yeast Genome Editing Tool

The fermentation industry is known to be very conservative, relying on traditional yeast management. Yet, in the modern fast-paced world, change comes about in facets such as climate change altering the quality and quantity of harvests, changes due to government regulations e.g., the use of pesticides or SO2, the need to become more sustainable, and of course by changes in consumer preferences. As a silent companion of the fermentation industry, the wine yeast Saccharomyces cerevisiae has followed mankind through millennia, changing from a Kulturfolger, into a domesticated species for the production of bread, beer, and wine and further on into a platform strain for the production of biofuels, enzymes, flavors, or pharmaceuticals. This success story is based on the ‘awesome power of yeast genetics’. Central to this is the very efficient homologous recombination (HR) machinery of S. cerevisiae that allows highly-specific genome edits. This microsurgery tool is so reliable that yeast has put a generally recognized as safe (GRAS) label onto itself and entrusted to itself the life-changing decision of mating type-switching. Later, yeast became its own genome editor, interpreted as domestication events, to adapt to harsh fermentation conditions. In biotechnology, yeast HR has been used with tremendous success over the last 40 years. Here we discuss several types of yeast genome edits then focus on HR and its inherent potential for evolving novel wine yeast strains and styles relevant for changing markets.

Saccharomyces cerevisiae and its industrial applications

Saccharomyces cerevisiae is the best studied eukaryote and a valuable tool for most aspects of basic research on eukaryotic organisms. This is due to its unicellular nature, which often simplifies matters, offering the combination of the facts that nearly all biological functions found in eukaryotes are also present and well conserved in S. cerevisiae. In addition, it is also easily amenable to genetic manipulation. Moreover, unlike other model organisms, S. cerevisiae is concomitantly of great importance for various biotechnological applications, some of which date back to several thousands of years. S. cerevisiae's biotechnological usefulness resides in its unique biological characteristics, i.e., its fermentation capacity, accompanied by the production of alcohol and CO2 and its resilience to adverse conditions of osmolarity and low pH. Among the most prominent applications involving the use of S. cerevisiae are the ones in food, beverage -especially wine- and biofuel production industries. This review focuses exactly on the function of S. cerevisiae in these applications, alone or in conjunction with other useful microorganisms involved in these processes. Furthermore, various aspects of the potential of the reservoir of wild, environmental, S. cerevisiae isolates are examined under the perspective of their use for such applications.

Assessment of microbial quality and health risks associated with traditional rice wine starter Xaj-pitha of Assam, India: a step towards defined and controlled fermentation

This study reports the microbial quality of ethnic starter culture Xaj-pitha used for rice wine fermentation in Assam. Here, we collected 60 Xaj-pitha samples belonging to Ahom community of the state and enumerated the microorganisms using spread plate technique. Illumina-based whole genome shotgun sequencing detected the presence of microbial contaminants like Acidovorax, Herbaspirillum, Methylobacterium, Pantoea, Pseudomonas, Stenotrophomonas, Staphylococcus, Micrococcus, Acinetobacter, etc. Presence of major health hazards associated with spontaneous rice wine fermentation necessitated method optimization through the development of a defined mixed starter culture. For this, functionally important α-amylase producers viz., Penicillium sp. ABTSJ23, Rhizopus oryzae ABTSJ63, Mucor guilliermondii ABTSJ72 and Amylomyces rouxii ABTSJ82 and eight yeasts viz., Saccharomyces cerevisiae ABTY1J, ABTY1S, ADJ5 & ADJ1, Wickerhamomyces anomalus ADJ2, Saccharomycopsis malanga ADJ3, Saccharomycopsis fibuligera ADJ4 and Saccharomycopsis malanga ADJ6 were retrieved using appropriate media. All the mould cultures tested negative for aflotoxins production. Among the yeasts, Saccharomyces cerevisiae ABTY1S and ADJ1 decarboxylated lysine HCl and tyramine HCl, respectively, indicating their biogenic amine production ability. For defined mixed starter culture, Amylomyces rouxii ABT82 with α-amylase (5.92 U/ml) and glucoamylase (7.50 U/ml) activities was selected as fungal partner; while Saccharomycopsis fibuligera ADJ4 and Saccharomyces cerevisiae ABT-Y1J with high ethanol production (up to 10.11% and 9.88% v/v, respectively) were selected as yeast partners. The mixed culture was able to produce high amount of glucose, ethanol and liquid (glucose 10.91% w/v; ethanol 7.5% w/v; liquid 51.0% w/v). Therefore, this study demonstrated the efficiency of mixed starter cultures for safe and controlled rice wine production.

Utility of Feed Enzymes and Yeast Derivatives in Ameliorating Deleterious Effects of Coccidiosis on Intestinal Health and Function in Broiler Chickens

Coccidiosis induced necrotic lesions impair digestive capacity and barrier function in concurrence with increased risks for secondary bacterial infections. The industry has been successful in controlling coccidiosis with anticoccidials and vaccination. However, concerns over Eimeria species resistant to anticoccidials, gaps in vaccination and restriction on antibiotics is stimulating research and application of alternative and/or complimentary strategies for coccidiosis control. The aim of this paper is to appraise literature on the utility of feed enzymes and yeast derivatives in modulating coccidiosis. Feed enzymes can complement endogenous enzymes (protease, amylase, and lipase) that may become insufficient in coccidiosis afflicted birds. Coccidiosis in the upper small intestine creates conditions that enhances efficacy of phytase and there are reports indicating supplemental phytase can mitigate the negative impact of coccidiosis on bone quality. Increase in intestinal short chain fatty acids due supplemental fiber degrading enzymes has been linked with reduced survivability of Eimeria. There is evidence whole yeast (live or dead) and derivatives can modulate coccidiosis. Immunomudulation properties of the yeast derivatives have been shown to enhance cellular and humoral immunity in Eimeria challenge models which is critical for effectiveness of coccidial vaccination. Moreover, yeast nucleotides have been shown to be beneficial in stimulating healing of intestinal mucosal surface. Other novel work has shown that certain yeast cells can produce derivatives with anticoccidial compounds effective in attenuating oocysts shedding. Yeast cell surface has also been shown to be an effective oral Eimeria vaccine delivery vehicle. Overall, while further refinement research is warranted to address inconsistencies in responses and commercial application, there is evidence feed enzymes and yeast derivatives could complement strategies for maintaining intestinal function to bolster growth performance in broilers compromised with coccidiosis. However, broilers receive diets containing several feed additives with distinct mode of actions and yet there is dearth of empirical data on the expected responses.Future evaluations should consider combinations of additives to document animal responses and potential synergies.

An extra copy of the β-glucosidase gene improved the cellobiose fermentation capability of an engineered Saccharomyces cerevisiae strain

In a previously engineered Saccharomyces cerevisiae recombinant, the cellobiose fermentation rate was significantly lower than the glucose fermentation rate. Thus, we implemented a genome-wide perturbation library to find gene targets for improving the cellobiose fermentation capability of the yeast strain. Unexpectedly, we discovered a transformant that contained an additional β-glucosidase gene (gh1-1), possibly through homologous recombination between the plasmids. The additional β-glucosidase led to the fastest cellobiose fermentation activity among all the transformants evaluated, and the strain demonstrated significantly higher β-glucosidase activity than the control strain, especially during the initial exponential growth phase. The present work revealed the benefit of the extra gh1-1 copy for efficient cellobiose fermentation in the engineered S. cerevisiae strain.

A Seamless Gene Deletion Method and Its Application for Regulation of Higher Alcohols and Ester in Baijiu Saccharomyces cerevisiae

The security of engineering Saccharomyces cerevisiae is becoming more focused on industrial production in consideration of the public concern regarding genetically modified organisms. In this work, a rapid and highly efficient system for seamless gene deletion in S. cerevisiae was developed through two-step integration protocol combined with endonuclease I-SCEI expression. The factors affecting the frequency of the second homologous recombination were optimized, and studies indicated that the mutant strains with 500 bp direct repeats and that have been incubating in galactose (0.5 g/100 mL) medium at 30°C and 180 r/min for 24 h permit high frequency (6.86 × 10⁻⁴) of the second homologous recombination. Furthermore, DNA sequence assays showed only self-DNA in native location without any foreign genes after deletion using this method. The seamless gene deletion method was applied to the construction of the engineering strains with BAT2 (encoding aminotransferase) deletion and ATF1 (alcohol acetyltransferases) overexpression. The mutants exhibited significant effects on higher alcohol reduction and ester improvement after Baijiu fermentation. The engineered strains can be used in industrial production in security, thereby meeting the requirements of modern science and technology.

Non-Conventional Yeast Strains Increase the Aroma Complexity of Bread

Saccharomyces cerevisiae is routinely used yeast in food fermentations because it combines several key traits, including fermentation efficiency and production of desirable flavors. However, the dominance of S. cerevisiae in industrial fermentations limits the diversity in the aroma profiles of the end products. Hence, there is a growing interest in non-conventional yeast strains that can help generate the diversity and complexity desired in today's diversified and consumer-driven markets. Here, we selected a set of non-conventional yeast strains to examine their potential for bread fermentation. Here, we tested ten non-conventional yeasts for bread fermentation, including two Saccharomyces species that are not currently used in bread making and 8 non-Saccharomyces strains. The results show that Torulaspora delbrueckii and Saccharomyces bayanus combine satisfactory dough fermentation with an interesting flavor profile. Sensory analysis and HS-SPME-GC-MS analysis confirmed that these strains produce aroma profiles that are very different from that produced by a commercial bakery strain. Moreover, bread produced with these yeasts was preferred by a majority of a trained sensory panel. These results demonstrate the potential of T. delbrueckii and S. bayanus as alternative yeasts for bread dough leavening, and provide a general experimental framework for the evaluation of more yeasts and bacteria.

Aroma Profile of Montepulciano d'Abruzzo Wine Fermented by Single and Co-culture Starters of Autochthonous Saccharomyces and Non-saccharomyces Yeasts

Montepulciano d'Abruzzo is a native grape variety of Vitis vinifera L., grown in central Italy and used for production of high quality red wines. Limited studies have been carried out to improve its enological characteristics through the use of indigenous strains of Saccharomyces cerevisiae. The main objective of the present work was to test two indigenous strains of S. cerevisiae (SRS1, RT73), a strain of Starmerella bacillaris (STS12), one of Hanseniaspora uvarum (STS45) and a co-culture of S. cerevisiae (SRS1) and S. bacillaris (STS12), in an experimental cellar to evaluate their role in the sensory characteristic of Montepulciano d'Abruzzo wine. A S. cerevisiae commercial strain was used. Fermentations were conducted under routine Montepulciano d'Abruzzo wine production, in which the main variables were the yeast strains used for fermentation. Basic winemaking parameters, some key chemical analysis and aroma compounds were considered. S. cerevisiae strain dynamics during fermentation were determined by molecular methods. The musts inoculated with the co-culture were characterized by a faster fermentation start and a higher content of glycerol after 3 days of fermentation, as well as the musts added with strains S. bacillaris (STS12) and H. uvarum (STS45). At the end of fermentation the parameters studied were quite similar in all the wines. Total biogenic amines (BA) content of all the wines was low. Ethanolamine was the predominant BA, with a concentration ranging from 21 to 24 mg/l. Wines were characterized by esters and alcohols. In particular, 2-phenylethanol, 3-methylbut-1-yl methanoate, and ethyl ethanoate were the major aroma volatile compounds in all wines. Statistical analysis highlighted the different role played by aroma compounds in the differentiation of wines, even if it was impossible to select a single class of compounds as the most important for a specific yeast. The present study represents a further step toward the use of tailored autochthonous strains to impart the specific characteristics of a given wine which are an expression of a specific terroir.

Diversity of flux distribution in central carbon metabolism of S. cerevisiae strains from diverse environments

Background

S. cerevisiae has attracted considerable interest in recent years as a model for ecology and evolutionary biology, revealing a substantial genetic and phenotypic diversity. However, there is a lack of knowledge on the diversity of metabolic networks within this species.

Results

To identify the metabolic and evolutionary constraints that shape metabolic fluxes in S. cerevisiae, we used a dedicated constraint-based model to predict the central carbon metabolism flux distribution of 43 strains from different ecological origins, grown in wine fermentation conditions. In analyzing these distributions, we observed a highly contrasted situation in flux variability, with quasi-constancy of the glycolysis and ethanol synthesis yield yet high flexibility of other fluxes, such as the pentose phosphate pathway and acetaldehyde production. Furthermore, these fluxes with large variability showed multimodal distributions that could be linked to strain origin, indicating a convergence between genetic origin and flux phenotype.

Conclusions

Flux variability is pathway-dependent and, for some flux, a strain origin effect can be found. These data highlight the constraints shaping the yeast operative central carbon network and provide clues for the design of strategies for strain improvement.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-016-0456-0) contains supplementary material, which is available to authorized users.

Optimised protocols for the metabolic profiling of S. cerevisiae by 1H-NMR and HRMAS spectroscopy

An optimised extraction protocol for the analysis of Saccharomyces cerevisiae aqueous and organic metabolites by nuclear magnetic resonance spectroscopy that allows the identification and quantification of up to 50 different compounds is presented. The method was compared with other metabolic profiling protocols for S. cerevisiae, where generally different analytical techniques are applied for metabolite quantification. In addition, the analysis of intact S. cerevisiae cells by HRMAS was implemented for the first time as a complementary method. The optimised protocols were applied to study the metabolic effect of glucose and galactose on S. cerevisiae growth. Furthermore, the metabolic reaction of S. cerevisiae to osmotic stress has been studied.

Identification of multiple interacting alleles conferring low glycerol and high ethanol yield in Saccharomyces cerevisiae ethanolic fermentation

BACKGROUND

Genetic engineering of industrial microorganisms often suffers from undesirable side effects on essential functions. Reverse engineering is an alternative strategy to improve multifactorial traits like low glycerol/high ethanol yield in yeast fermentation. Previous rational engineering of this trait always affected essential functions like growth and stress tolerance. We have screened Saccharomyces cerevisiae biodiversity for specific alleles causing lower glycerol/higher ethanol yield, assuming higher compatibility with normal cellular functionality. Previous work identified ssk1E330N…K356N as causative allele in strain CBS6412, which displayed the lowest glycerol/ethanol ratio.

RESULTS

We have now identified a unique segregant, 26B, that shows similar low glycerol/high ethanol production as the superior parent, but lacks the ssk1E330N…K356N allele. Using segregants from the backcross of 26B with the inferior parent strain, we applied pooled-segregant whole-genome sequence analysis and identified three minor quantitative trait loci (QTLs) linked to low glycerol/high ethanol production. Within these QTLs, we identified three novel alleles of known regulatory and structural genes of glycerol metabolism, smp1R110Q,P269Q, hot1P107S,H274Y and gpd1L164P as causative genes. All three genes separately caused a significant drop in the glycerol/ethanol production ratio, while gpd1L164P appeared to be epistatically suppressed by other alleles in the superior parent. The order of potency in reducing the glycerol/ethanol ratio of the three alleles was: gpd1L164P > hot1P107S,H274Y ≥ smp1R110Q,P269Q.

CONCLUSIONS

Our results show that natural yeast strains harbor multiple specific alleles of genes controlling essential functions, that are apparently compatible with survival in the natural environment. These newly identified alleles can be used as gene tools for engineering industrial yeast strains with multiple subtle changes, minimizing the risk of negatively affecting other essential functions. The gene tools act at the transcriptional, regulatory or structural gene level, distributing the impact over multiple targets and thus further minimizing possible side-effects. In addition, the results suggest polygenic analysis of complex traits as a promising new avenue to identify novel components involved in cellular functions, including those important in industrial applications.

Quantitative trait analysis of yeast biodiversity yields novel gene tools for metabolic engineering

Engineering of metabolic pathways by genetic modification has been restricted largely to enzyme-encoding structural genes. The product yield of such pathways is a quantitative genetic trait. Out of 52 Saccharomyces cerevisiae strains phenotyped in small-scale fermentations, we identified strain CBS6412 as having unusually low glycerol production and higher ethanol yield as compared to an industrial reference strain. We mapped the QTLs underlying this quantitative trait with pooled-segregant whole-genome sequencing using 20 superior segregants selected from a total of 257. Plots of SNP variant frequency against SNP chromosomal position revealed one major and one minor locus. Downscaling of the major locus and reciprocal hemizygosity analysis identified an allele of SSK1, ssk1(E330N…K356N), expressing a truncated and partially mistranslated protein, as causative gene. The diploid CBS6412 parent was homozygous for ssk1(E330N…K356N). This allele affected growth and volumetric productivity less than the gene deletion. Introduction of the ssk1(E330N…K356N) allele in the industrial reference strain resulted in stronger reduction of the glycerol/ethanol ratio compared to SSK1 deletion and also compromised volumetric productivity and osmotolerance less. Our results show that polygenic analysis of yeast biodiversity can provide superior novel gene tools for metabolic engineering.

Construction of integrative plasmids suitable for genetic modification of industrial strains of Saccharomyces cerevisiae

The development of efficient tools for genetic modification of industrial yeast strains is one of the challenges that face the use of recombinant cells in industrial processes. In this study, we examine how the construction of two complementary integrative vectors can fulfill the major requirements of industrial recombinant yeast strains: the use of lactose assimilation genes as a food-grade yeast selection marker, and a system of integration that does not leave hazardous genes in the host genome and involves minimal interference in the yeast physiology. The pFB plasmid set was constructed to co-integrate both LAC4-based and LAC12-based cassettes into the ribosomal DNA (rDNA) locus to allow yeast cells to be selected in lactose medium. This phenotype can also be used to trace the recombinant cells in the environment by simply being plated on X-gal medium. The excisable trait of the LAC12 marker allows the introduction of many different heterologous genes, and makes it possible to introduce a complete heterologous metabolic pathway. The cloned heterologous genes can be highly expressed under the strong and constitutive TPI1 gene promoter, which can be exchanged for easy digestion of enzymes if necessary. This platform was introduced into Saccharomyces cerevisiae JP1 industrial strain where a recombinant with high stability of markers was produced without any change in the yeast physiology. Thus, it proved to be an efficient tool for the genetic modification of industrial strains.

Flavour-active wine yeasts

The flavour of fermented beverages such as beer, cider, saké and wine owe much to the primary fermentation yeast used in their production, Saccharomyces cerevisiae. Where once the role of yeast in fermented beverage flavour was thought to be limited to a small number of volatile esters and higher alcohols, the discovery that wine yeast release highly potent sulfur compounds from non-volatile precursors found in grapes has driven researchers to look more closely at how choice of yeast can influence wine style. This review explores recent progress towards understanding the range of ‘flavour phenotypes’ that wine yeast exhibit, and how this knowledge has been used to develop novel flavour-active yeasts. In addition, emerging opportunities to augment these phenotypes by engineering yeast to produce so-called grape varietal compounds, such as monoterpenoids, will be discussed.

High hydrostatic pressure activates gene expression that leads to ethanol production enhancement in a Saccharomyces cerevisiae distillery strain

High hydrostatic pressure (HHP) is a stress that exerts broad effects on microorganisms with characteristics similar to those of common environmental stresses. In this study, we aimed to identify genetic mechanisms that can enhance alcoholic fermentation of wild Saccharomyces cerevisiae isolated from Brazilian spirit fermentation vats. Accordingly, we performed a time course microarray analysis on a S. cerevisiae strain submitted to mild sublethal pressure treatment of 50 MPa for 30 min at room temperature, followed by incubation for 5, 10 and 15 min without pressure treatment. The obtained transcriptional profiles demonstrate the importance of post-pressurisation period on the activation of several genes related to cell recovery and stress tolerance. Based on these results, we over-expressed genes strongly induced by HHP in the same wild yeast strain and identified genes, particularly SYM1, whose over-expression results in enhanced ethanol production and stress tolerance upon fermentation. The present study validates the use of HHP as a biotechnological tool for the fermentative industries.

Pilot-scale evaluation the enological traits of a novel, aromatic wine yeast strain obtained by adaptive evolution

In the competitive context of the wine market, there is a growing interest for novel wine yeast strains that have an overall good fermentation capacity and that contribute favorably to the organoleptic quality of wine. Using an adaptive evolution strategy based on growth on gluconate as sole carbon source, we recently obtained wine yeasts with improved characteristics in laboratory-scale fermentations. The characteristics included enhanced fermentation rate, decreased formation of acetate and greater production of fermentative aroma. We report an evaluation of the potential value of the evolved strain ECA5™ for winemaking, by comparing its fermentation performance and metabolite production to those of the parental strain in pilot-scale fermentation trials, with various grape cultivars and winemaking conditions. We show that the evolved strain has outstanding attributes relative to the parental wine yeast strain, and in particular the production of less volatile acidity and greater production of desirable volatile esters, important for the fruity/flowery character of wines. This study highlights the potential of evolutionary engineering for the generation of strains with a broad range of novel properties, appropriate for rapid application in the wine industry.

Efficient expression of a Paenibacillus barcinonensis endoglucanase in Saccharomyces cerevisiae

The endoglucanase coded by celA (GenBank Access No. Y12512) from Paenibacillus barcinonensis, an enzyme with good characteristics for application on paper manufacture from agricultural fibers, was expressed in Saccharomyces cerevisiae by using different domains of the cell wall protein Pir4 as translational fusion partners, to achieve either secretion or cell wall retention of the recombinant enzyme. Given the presence of five potential N-glycosylation sites in the amino acid sequence coded by celA, the effect of glycosylation on the enzymatic activity of the recombinant enzyme was investigated by expressing the recombinant fusion proteins in both, standard and glycosylation-deficient strains of S. cerevisiae. Correct targeting of the recombinant fusion proteins was confirmed by Western immunoblot using Pir-specific antibodies, while enzymatic activity on carboxymethyl cellulose was demonstrated on plate assays, zymographic analysis and colorimetric assays. Hyperglycosylation of the enzyme when expressed in the standard strain of S. cerevisiae did not affect activity, and values of 1.2 U/ml were obtained in growth medium supernatants in ordinary batch cultures after 24 h. These values compare quite favorably with those described for other recombinant endoglucanases expressed in S. cerevisiae. This is one of the few reports describing the expression of Bacillus cellulases in S. cerevisiae, since yeast expressed recombinant cellulases have been mostly of fungal origin. It is also the first report of the yeast expression of this particular endoglucanase.

Remanence and survival of commercial yeast in different ecological niches of the vineyard

The use of commercial wine yeast strains as starters has been grown extensively over the past three decades. Wine yeasts are annually released in winery environments; however, little is known about the fate of these strains in the vineyard. To evaluate the industrial starter yeasts' ability to survive in nature and become part of the natural microbiota of musts, commercial yeast was disseminated voluntarily in an experimental vineyard in the Madrid region (Spain). A large sampling plan was devised over 3 years, including samples of grapes, leaves, bark and soil. The disseminated yeast was well represented in the vineyard during the first 8 months. After 2 years, the commercial yeast strain had not survived in the sprayed plants, but a residual population was found in plants situated 50 m east of the sprayed area. After 3 years, commercial yeast disseminated was not found in the sampled vineyard. Grapes and soil showed the highest number of yeasts isolated in the vegetative period, the bark being the main natural reservoir during the resting stages. The result of analysis of population variations from year to year indicated that permanent implantation of commercial strain (K1M) in the vineyard did not occur and its presence was limited in time.

Evolutionary engineered Saccharomyces cerevisiae wine yeast strains with increased in vivo flux through the pentose phosphate pathway

Amplification of the flux toward the pentose phosphate (PP) pathway might be of interest for various S. cerevisiae based industrial applications. We report an evolutionary engineering strategy based on a long-term batch culture on gluconate, a substrate that is poorly assimilated by S. cerevisiae cells and is metabolized by the PP pathway. After adaptation for various periods of time, we selected strains that had evolved a greater consumption capacity for gluconate. (13)C metabolic flux analysis on glucose revealed a redirection of carbon flux from glycolysis towards the PP pathway and a greater synthesis of lipids. The relative flux into the PP pathway was 17% for the evolved strain (ECA5) versus 11% for the parental strain (EC1118). During wine fermentation, the evolved strains displayed major metabolic changes, such as lower levels of acetate production, higher fermentation rates and enhanced production of aroma compounds. These represent a combination of novel traits, which are of great interest in the context of modern winemaking.

Experimental evolution in yeast: a practical guide

Experimental evolution refers to a broad range of studies in which selection pressures are applied to populations. In some applications, particular traits are desired, while in others the subject of study is the mechanisms of evolution or the different modes of behavior between systems. This chapter will explore the range of studies falling under the experimental evolution umbrella, and their relative merits for different types of applications. Practical aspects of experimental evolution will also be discussed, including commercial suppliers, analysis methods, and best laboratory practices.

Reduction of oxidative cellular damage by overexpression of the thioredoxin TRX2 gene improves yield and quality of wine yeast dry active biomass

Background

Wine Saccharomyces cerevisiae strains, adapted to anaerobic must fermentations, suffer oxidative stress when they are grown under aerobic conditions for biomass propagation in the industrial process of active dry yeast production. Oxidative metabolism of sugars favors high biomass yields but also causes increased oxidation damage of cell components. The overexpression of the TRX2 gene, coding for a thioredoxin, enhances oxidative stress resistance in a wine yeast strain model. The thioredoxin and also the glutathione/glutaredoxin system constitute the most important defense against oxidation. Trx2p is also involved in the regulation of Yap1p-driven transcriptional response against some reactive oxygen species.

Results

Laboratory scale simulations of the industrial active dry biomass production process demonstrate that TRX2 overexpression increases the wine yeast final biomass yield and also its fermentative capacity both after the batch and fed-batch phases. Microvinifications carried out with the modified strain show a fast start phenotype derived from its enhanced fermentative capacity and also increased content of beneficial aroma compounds. The modified strain displays an increased transcriptional response of Yap1p regulated genes and other oxidative stress related genes. Activities of antioxidant enzymes like Sod1p, Sod2p and catalase are also enhanced. Consequently, diminished oxidation of lipids and proteins is observed in the modified strain, which can explain the improved performance of the thioredoxin overexpressing strain.

Conclusions

We report several beneficial effects of overexpressing the thioredoxin gene TRX2 in a wine yeast strain. We show that this strain presents an enhanced redox defense. Increased yield of biomass production process in TRX2 overexpressing strain can be of special interest for several industrial applications.

Progress in metabolic engineering of Saccharomyces cerevisiae

The traditional use of the yeast Saccharomyces cerevisiae in alcoholic fermentation has, over time, resulted in substantial accumulated knowledge concerning genetics, physiology, and biochemistry as well as genetic engineering and fermentation technologies. S. cerevisiae has become a platform organism for developing metabolic engineering strategies, methods, and tools. The current review discusses the relevance of several engineering strategies, such as rational and inverse metabolic engineering, evolutionary engineering, and global transcription machinery engineering, in yeast strain improvement. It also summarizes existing tools for fine-tuning and regulating enzyme activities and thus metabolic pathways. Recent examples of yeast metabolic engineering for food, beverage, and industrial biotechnology (bioethanol and bulk and fine chemicals) follow. S. cerevisiae currently enjoys increasing popularity as a production organism in industrial ("white") biotechnology due to its inherent tolerance of low pH values and high ethanol and inhibitor concentrations and its ability to grow anaerobically. Attention is paid to utilizing lignocellulosic biomass as a potential substrate.

23S RNA-derived replicon as a 'molecular tag' for monitoring inoculated wine yeast strains

In this study we have developed a useful method to identify a particular yeast strain within a mixture of strains during must fermentation, based on the presence or absence of a stable genetic element derived from Saccharomyces cerevisiae 23S RNA autonomous replicon. 23S RNA is a natural virus-like RNA replicon present in some S. cerevisiae strains, which encodes only its own RNA-dependent RNA polymerase named p104. A modified version of 23S RNA (23S-tagged RNA) was generated after transformation of S. cerevisiae wine strains with a launching plasmid, where six nucleotides were changed in the 23S RNA cDNA sequence without modifying the amino acid sequence of p104 RNA polymerase. Once generated, the 23S-tagged RNA can replicate autonomously (without the plasmid), is very stable, is present in high copy number in stationary phase or nitrogen-starved cells and confers no phenotype to the host, like the endogenous 23S RNA replicon. However, it can be distinguished from endogenous 23S RNA by reverse transcription followed by polymerase chain reaction (RT-PCR) with specific oligonucleotide primers. 23S RNA-derived replicon can be used to tag wine yeast strains in order to monitor easily their prevalence over endogenous strains during wine fermentation.

Metabolically engineered yeasts: 'potential' industrial applications

Industrial biotechnology and metabolic engineering can offer an innovative approach to solving energy and pollution problems. The potential industrial applications of yeast are reviewed here.

A systems biology perspective of wine fermentations

The yeast Saccharomyces cerevisiae is an important industrial microorganism. Nowadays, it is being used as a cell factory for the production of pharmaceuticals such as insulin, although this yeast has long been utilized in the bakery to raise dough, and in the production of alcoholic beverages, fermenting the sugars derived from rice, wheat, barley, corn and grape juice. S. cerevisiae has also been extensively used as a model eukaryotic system. In the last decade, genomic techniques have revealed important features of its molecular biology. For example, DNA array technologies are routinely used for determining gene expression levels in cells under different physiological conditions or environmental stimuli. Laboratory strains of S. cerevisiae are different from wine strains. For instance, laboratory yeasts are unable to completely transform all the sugar in the grape must into ethanol under winemaking conditions. In fact, standard culture conditions are usually very different from winemaking conditions, where multiple stresses occur simultaneously and sequentially throughout the fermentation. The response of wine yeasts to these stimuli differs in some aspects from laboratory strains, as suggested by the increasing number of studies in functional genomics being conducted on wine strains. In this paper we review the most recent applications of post-genomic techniques to understand yeast physiology in the wine industry. We also report recent advances in wine yeast strain improvement and propose a reference framework for integration of genomic information, bioinformatic tools and molecular biology techniques for cellular and metabolic engineering. Finally, we discuss the current state and future perspectives for using 'modern' biotechnology in the wine industry.