Fungal laccases as tools for the synthesis of new hybrid molecules and biomaterials

Enzymatic degradability of diclofenac ozonation products: A mechanistic analysis

The treatment of waterborne micropollutants, such as diclofenac, presents a significant challenge to wastewater treatment plants due to their incomplete removal by conventional methods. Ozonation is an effective technique for the degradation of micropollutants. However, incomplete oxidation can lead to the formation of ecotoxic by-products that require a subsequent post-treatment step. In this study, we analyze the susceptibility of micropollutant ozonation products to enzymatic digestion with laccase from Trametes versicolor to evaluate the potential of enzymatic treatment as a post-ozonation step. The omnipresent micropollutant diclofenac is used as an example, and the enzymatic degradation kinetics of all 14 detected ozonation products are analyzed by high-performance liquid chromatography coupled with high-resolution mass spectrometry (HPLC-HRMS) and tandem mass spectrometry (MS2). The analysis shows that most of the ozonation products are responsive to chemo-enzymatic treatment but show considerable variation in enzymatic degradation kinetics and efficiencies. Mechanistic investigation of representative transformation products reveals that the hydroxylated aromatic nature of the ozonation products matches the substrate spectrum, facilitating their rapid recognition as substrates by laccase. However, after initiation by laccase, the subsequent chemical pathway of the enzymatically formed radicals determines the global degradability observed in the enzymatic process. Substrates capable of forming stable molecular oxidation products inhibit complete detoxification by oligomerization. This emphasizes that it is not the enzymatic uptake of the substrates but the channelling of the reaction of the substrate radicals towards the oligomerization of the substrate radicals that is the key step in the further development of an enzymatic treatment step for wastewater applications.

Exploring laccase: a sustainable enzymatic solution for the paper recycling domain

The global advocacy of resource conservation and waste management emphasizes the significance of sustainable practices, particularly in sectors such as paper manufacturing and recycling. Currently, conventional chemical methods are predominant for paper production, necessitating the use of substantial amount of toxic chemicals. This chemical-intensive approach compromises the recycled fiber quality, generates hazardous effluent causing serious ecological threats which triggers regulatory complexities for the mills. To address these challenges modern research suggests adopting sustainable eco-friendly practices such as employing enzymes. This review aims to explore the applicability of 'laccase' enzyme for paper recycling, investigating its properties and contribution to improved recycling practices. By delving into the potential application of laccase integration into the papermaking process, this article sheds light on the limitations inherent in traditional methods surmounted within both research and translational landscapes. Culture and process optimization studies, supporting the technological improvements and the future prospects have been documented.

Oxidation of chlortetracycline and its isomers by Botrytis aclada laccase in the absence of mediators: pH dependence and identification of transformation products by LC-MS

Tetracyclines are antibiotics considered emerging pollutants and currently, wastewater treatment plants are not able to remove them efficiently. Laccases are promising enzymes for bioremediation because they can oxidize a wide variety of substrates. The aim of this study was to evaluate the Botrytis aclada laccase for the oxidation of chlortetracycline and its isomers in the absence of a mediator molecule, at a pH range between 3.0 to 7.0, and to characterize the transformation products by LC-MS. Chlortetracycline and three isomers were detected in both, controls and reaction mixtures at 0 h and in controls after 48 h of incubation but in different proportions depending on pH. An additional isomer was also detected, but only in the presence of BaLac. Based on the transformation products identified in the enzymatic reactions and information from literature, we assembled a network of transformation pathways starting from chlortetracycline and its isomers. The spectrometric analysis of the products indicated the probable occurrence of oxygen insertion, dehydrogenation, demethylation and deamination reactions. Four new products were identified, and we also described a novel transformation product without the chloro group. We observed that increasing pH led to higher diversity of main products. This is the first study using the laccase from fungi Botrytis aclada to oxidate chlortetracycline and its isomers and it can be considered as an ecological alternative to be used in bioremediation processes such as wastewater.

In-Situ Synchrotron Imaging, Experimental, and Computational Investigations on the Efficiency of Trametes versicolor Laccase on Detoxification of P-Cresyl Sulfate (PCS) Protein Bound Uremic Toxin (PBUT)

Protein bound uremic toxins (PBUTs) are small substances binding to larger proteins, mostly human serum albumin (HSA), and are challenging to remove by hemodialysis (HD). Among different classes of PBUTs, p-cresyl sulfate (PCS) is the most widely used marker molecule and major toxin, as 95% is bound to HSA. PCS has a pro-inflammatory effect and increases both the uremia symptom score and multiple pathophysiological activities. High-flux HD to clear PCS leads to serious loss of HSA, which results in a high mortality rate. The goal of the present study is to investigate the efficacy of PCS detoxification in serum of HD patients using a biocompatible laccase enzyme from Trametes versicolor. Molecular docking was used to gain an in-depth understanding of the interactions between PCS and the laccase to identify the functional group(s) responsible for ligand-protein receptor interactions. UV-Vis spectroscopy and gas chromatography-mass spectrometry (GC-MS) were used to assess the detoxification of PCS. GC-MS was used to identify the detoxification byproducts and their toxicity was assessed using docking commutations. In situ synchrotron radiation micro-computed tomography (SR-µCT) imaging available at the Canadian Light Source (CLS) was conducted to assess HSA binding with PCS before and after detoxification with laccase and undertake the corresponding quantitative analysis. GC-MS analyses confirmed the detoxification of PCS with laccase at a concentration of 500mg/L. The potential pathway of PCS detoxification in the presence of the laccase was identified. Increasing laccase concentration led to the formation of m-cresol, as indicated by the corresponding absorption in the UV-Vis spectra and a sharp peak on the GC-MS spectra. Our analysis provides insight into the general features of PCS binding on Sudlow site II, as well as insights into PCS detoxification product interactions. The average affinity energy for detoxification products was lower than that of PCS. Even though some byproducts showed potential toxicity, the level was lower than for PCS based on toxicity indexes (e.g., LD50/LC50, carcinogenicity, neurotoxicity, mutagenicity). In addition, these small compounds can also be more easily removed by HD compared to PCS. SR-µCT quantitative analysis showed adhesion of the HSA to a significant reduced extent in the presence of the laccase enzyme in bottom sections of the polyarylethersulfone (PAES) clinical HD membrane tested. Overall, this study opens new frontiers for PCS detoxification.

Potential of the enzyme laccase for the synthesis and derivatization of antimicrobial compounds

Laccases [E.C. 1.10.3.2, benzenediol:dioxygen oxidoreductase] can oxidize phenolic substances, e.g. di- and polyphenols, hydroxylated biaryls, aminophenols or aryldiamines. This large substrate spectrum is the basis for various reaction possibilities, which include depolymerization and polymerization reactions, but also the coupling of different substance classes. To catalyze these reactions, laccases demand only atmospheric oxygen and no depletive cofactors. The utilization of mild and environmentally friendly reaction conditions such as room temperature, atmospheric pressure, and the avoidance of organic solvents makes the laccase-mediated reaction a valuable tool in green chemistry for the synthesis of biologically active compounds such as antimicrobial substances. In particular, the production of novel antibiotics becomes vital due to the evolution of antibiotic resistances amongst bacteria and fungi. Therefore, laccase-mediated homo- and heteromolecular coupling reactions result in derivatized or newly synthesized antibiotics. The coupling or derivatization of biologically active compounds or its basic structures may allow the development of novel pharmaceuticals, as well as the improvement of efficacy or tolerability of an already applied drug. Furthermore, by the laccase-mediated coupling of two different active substances a synergistic effect may be possible. However, the coupling of compounds that have no described efficacy can lead to biologically active substances by means of laccase. The review summarizes laccase-mediated reactions for the synthesis of antimicrobial compounds valuable for medical purposes. In particular, reactions with two different reaction partners were shown in detail. In addition, studies with in vitro and in vivo experimental data for the confirmation of the antibacterial and/or antifungal efficacy of the products, synthesized with laccase, were of special interest. Analyses of the structure-activity relationship confirm the great potential of the novel compounds. These substances may represent not only a value for pharmaceutical and chemical industry, but also for other industries due to a possible functionalization of surfaces such as wood or textiles.

Feasibility and potential of laccase-based enzyme in wastewater treatment through sustainable approach: A review

The worldwide increase in metropolitan cities and rise in industrialization have resulted in the assimilation of hazardous pollutants into the ecosystems. Different physical, chemical and biological techniques have been employed to remove these toxins from water bodies. Several bioprocess applications using microbes and their enzymes are utilized to achieve the goal. Biocatalysts, such as laccases, are employed explicitly to deplete a variety of organic pollutants. However, the degradation of contaminants using biocatalysts has many disadvantages concerning the stability and activity of the enzyme. Hence, they are immobilized on different supports to improve the enzyme kinetics and recyclability. Furthermore, standard wastewater treatment methods are not effective in eliminating all the contaminants. As a result, membrane separation technologies have emerged to overcome the limitations of traditional wastewater treatment methods. Moreover, enzymes immobilized onto these membranes have generated new avenues in wastewater purification technology. This review provides the latest information on laccases from diverse sources, their molecular framework and their mode of action. This report also gives information about various immobilization techniques and the application of membrane bioreactors to eliminate and biotransform hazardous contaminants. In a nutshell, laccases appear to be the most promising biocatalysts for green and cost-efficient wastewater treatment technologies.

Modification of Deoxynivalenol by a Fungal Laccase Paired with Redox Mediator TEMPO

Mycotoxins such as deoxynivalenol introduce a health risk to the food supply and are costly to manage or avoid. Technologies for reducing or eliminating the toxicity of deoxynivalenol could be useful in a variety of processes, such as in preserving the value as animal feed of byproducts of ethanol production. We characterized transformation products of deoxynivalenol that were formed by the combination of a fungal laccase paired with the chemical mediator 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO), using chromatography, mass spectrometry, and nuclear magnetic resonance spectroscopy. Alcohol groups at the C3 and C15 positions of deoxynivalenol were oxidized to ketones, and the chemical mediator became covalently linked to the C4 position. Conditions experienced during gas chromatography led to the dissociation of TEMPO, forming 3,15-diketodeoxynivalenol. Understanding the range of possible modifications to deoxynivalenol and other trichothecenes is a necessary step toward effective remediation of contaminated grain.

Immobilized fungal enzymes: Innovations and potential applications in biodegradation and biosynthesis

Microbial enzymes catalyze various reactions inside and outside living cells. Among the widely studied enzymes, fungal enzymes have been used for some of the most diverse purposes, especially in bioremediation, biosynthesis, and many nature-inspired commercial applications. To improve their stability and catalytic ability, fungal enzymes are often immobilized on assorted materials, conventional as well as nanoscale. Recent advances in fungal enzyme immobilization provide effective and sustainable approaches to achieve improved environmental and commercial outcomes. This review aims to provide a comprehensive overview of commonly studied fungal enzymes and immobilization technologies. It also summarizes recent advances involving immobilized fungal enzymes for the degradation or assembly of compounds used in the manufacture of products, such as detergents, food additives, and fossil fuel alternatives. Furthermore, challenges and future directions are highlighted to offer new perspectives on improving existing technologies and addressing unexplored fields of applications.

Testing for the ability to modify antibiotics of Panus tigrinus 8/18 Lentinus strigosus 1566 laccase

In advanced biotechnology, the utilization of enzymes to achieve new or modified compounds with antibacterial, fungicidal, and anti-cancer specifications is crucial. Mushroom lactases are a hopeful biocatalyst for the synthesis and modification of different compounds. They are an accessible and inexpensive enzyme for the preparation of reaction objects and have recently received attention. Laccase purification was performed from basidiomycete Lentinus strigosus (LS) in several stages: Stage 1. On ion-exchange chromatography on TEAE Servacell 23 (400 ml), two distinctly separated laccase activity peaks were observed, eluted from the carrier at 0.21 and 0.27 M NaCl. In order to reduce the loss of enzymes, all fractions with laccase activity were collected, concentrated, and desalted using an ultrafiltration cell (Amicon, United States) with a UM-10 membrane. Stage 2. The resulting preparation with laccase activity was applied to a Q-Sepharose column (60 ml). Two well-separated peaks with laccase activity were obtained during the elution: laccase I (0.12 M NaCl) and laccase II (0.2 M NaCl). Stage 3. In the course of further purification of both enzymes, carried out on anion-exchange carrier Resource Q (6 ml), a broken gradient was used: 0 - 10%, 10 - 20%, and 20 - 100% with 1M NaCl. Stage 4. Both laccase I and laccase II, obtained after Resource Q, were desalted, concentrated to 1 ml each, and applied to a Superdex 75 gel filtration column. As a result, two laccases were obtained in a homogeneous form.

Copper ions binding regulation for the high-efficiency biodegradation of ciprofloxacin and tetracycline-HCl by low-cost permeabilized-cells

Cu²⁺ plays a decisive role for the bio-oxidation in the active center of laccase. In the fermentation-purified process, the loss of Cu²⁺ reduces the activity and the high cost limits the application of laccase. In this study, a fermentation-permeabilization combined process were developed which based on the regulation of Cu²⁺ binding time to produce the permeabilized-cells containing laccase, in which Cu²⁺ can enter the cells freely to greatly improve the laccase activity and reduce the immobilization cost by about 19 times. So, the permeabilized-cells is suitable for biodegradation of antibiotic pollution in the environment, which was applied for the biodegradation of ciprofloxacin (CIP) and tetracycline-HCl (TCH) and the degradation efficiency reached 95.42% and 98.73%, respectively, with low ecotoxicity of the degradation products. Finally, the degradation mechanism was analyzed theoretically by molecular docking. Therefore, this study provided a low-cost, eco-friendly, and widely applicable method for organic pollutants removal.

Extraction and profiling of proteins in yellow powder from sweet potato starch wastewater using response surface methodology and proteomic approach

Sweet potato starch industry produce generous high soluble solid wastewater containing various biochemicals such as proteins. The wastewater could be spray dried into a product called yellow powder (YP). Proteins in the YP were recovered and profiled in this study. The extraction conditions were optimized on dependent variables of YP material-water ratio, pH, and temperature using response surface methodology (RSM). Maximum protein yield (61.2%) using RSM were observed at a material-water ratio of 50 (mg/L), pH 9.5, and extraction temperature of 30℃. Subsequently, a total of 25 proteins were identified by proteomic analysis, which mainly were sporamins, β-amylase, starch phosphorylase, polyphenol oxidase, and superoxide dismutase. The extraction and profiling of proteins from YP would contribute to a comprehensive utilization and added value of the wastewater produced by sweet potato starch processing industry. PRACTICAL APPLICATION: This study reported the recovery (61.2%) of proteins and protein profile of yellow powder (byproducts) from sweet potato starch wastewater. These information could contribute to the valorization a yellow powder into high-value ingredients.

In Situ Wood Fiber Dyeing Through Laccase Catalysis for Fiberboard Production

The aim of the present work was to develop an innovative and environmentally friendly process for wood fiber dyeing and to produce 3-dimensionally fully colored medium-density fiberboard (MDF). The potential of laccase-catalyzed polymerization of selected precursors to form dyes useful in fiberboard manufacturing, a technique used for the first time in this field, was demonstrated. Some of the 7 aromatic compounds tested yielded colored products after laccase treatment under both acid and alkaline conditions, and a good variety of colors was attained by using mixtures of two different monomers. To demonstrate the coloration and design potential of laccase conversion of aromatic compounds, MDFs were enzymatically dyed using an in situ one-step laccase-catalyzed coloration process, and the results were compared against commercial MDFs obtained by using organic coloring agents. Important advantages over conventional processing methods include good color fastness and, in some cases, new hydrophobic properties, allowing designers and woodworkers to explore the beauty of textures and the use of simpler and milder processing conditions that eliminate harsh chemical use and reduce energy consumption.

Selection of a pH- and temperature-stable laccase from Ganoderma australe and its application for bioremediation of textile dyes

By virtue of screening, purification, and properties characterization, this study captures a new pH- and temperature-stable laccase, designated Galacc-F, from Ganoderma australe for dye bioremediating applications. The enzyme was purified to homogeneity by salt precipitation, ionic exchange, and size exclusion chromatography with a final specific activity of 22.214 U mg^-1, yielding a purification fold of 23.989 and recovery of 38.44%. Its molecular weight was estimated to be 48.0 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, zymography, Sephadex G-100 column, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, which confirmed its monomeric nature. Galacc-F exhibited high levels of activity and stability over wide ranges of pH (5.0-8.0) and temperature (10-60 °C), which are highly valuable properties in industrial processes. Broad substrate specificity was observed, wherein a better affinity was found for 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) with a low value of K_m (164.137 μM) and higher k_cat/K_m ratio (1.663 s^-1 μM^-1). Activity was stimulated by Cu²⁺ and β-mercaptoethanol but inhibited by ethylenediaminetetraacetic acid, diethylpyrocarbonate, iodoacetic acid, phenylmethylsulfonyl fluoride, and Hg²⁺, indicating that Galacc-F is a metalloprotease containing a typical histidine-cysteine-serine catalytic triad. It had high tolerance to surfactants, oxidants, and salts. Additionally, a fabricated protocol for native Galacc-F immobilization onto Fe₃O₄@Chitosan composite nanoparticles using glutaraldehyde as a crosslinker was developed. Most importantly, the enzyme was determined to be ideal for use in efficient treatment of dye effluents as compared with the laccases requiring redox mediators.

Laccase-Catalyzed Derivatization of Antibiotics with Sulfonamide or Sulfone Structures

Trametes spec. laccase (EC 1.10.3.2.) mediates the oxidative coupling of antibiotics with sulfonamide or sulfone structures with 2,5-dihydroxybenzene derivatives to form new heterodimers and heterotrimers. These heteromolecular hybrid products are formed by nuclear amination of the p-hydroquinones with the primary amino group of the sulfonamide or sulfone antibiotics, and they inhibited in vitro the growth of Staphylococcus species, including multidrug-resistant strains.

Production and characterization of a novel thermostable laccase from Bacillus licheniformis VNQ and its application in synthesis of bioactive 1,4-naphthoquinones

Bacterial laccases have proven to be a potential biocatalyst for various industrial applications due to their remarkable catalytic and stability properties. In this study, a novel thermostable laccase was produced from the bacterium Bacillus licheniformis VNQ by submerged fermentation. The specific activity of crude and purified laccase was found to be 13.17 U mg^-1 and 83.47 U mg^-1, respectively. The enzyme possessed a molecular mass of ∼48 kDa when characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The optimum temperature and pH for enzyme activity was determined to be 55°C and 5.0, respectively. The enzyme was considered to be thermo-tolerant as it possessed a half-life of 4 h at 70°C. The enzyme was utilized for the oxidative biotransformation of in situ synthesized p-quinones to biologically active compounds, 1,4-naphthoquinone and its derivative. The obtained products were characterized using nuclear magnetic resonance (NMR) spectroscopy and gas chromatography-mass spectrometry (GC-MS) analysis. A high yield of naphthoquinones (74.93 ± 1.2%) with 1,4-naphthoquinone (60.61 ± 1.0%), and its derivative 2-hydroxy-1,4-naphthoquinone (14.32 ± 0.2%) was obtained at the optimized reaction conditions.

Proteo-Transcriptomic Characterization of Sirex nitobei (Hymenoptera: Siricidae) Venom

The wood-boring woodwasp Sirex nitobei is a native pest in Asia, infecting and weakening the host trees in numerous ecological and commercial coniferous forest plantations. In China, hosts of S. nitobei are diverse, so the pest has spread to several provinces of China, resulting in considerable economic and ecological damage. During female oviposition, S. nitobei venom along with arthrospores of the symbiotic fungus Amylostereum areolatum or A. chaetica is injected into host trees, and the combination of these two biological factors causes the death of xylem host trees. The presence of venom alone causes only the yellowing and wilting of needles. In this study, we constructed the venom gland transcriptome of S. nitobei for the first time and a total of 15,036 unigenes were acquired. From the unigenes, 11,560 ORFs were identified and 537 encoding protein sequences with signal peptides at the N-terminus. Then, we used the venomics approach to characterize the venom composition of female S. nitobei and predicted 1095 proteins by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. We focused on seven proteins that were both highly expressed in the venom gland transcriptome and predicted in the crude venom proteome. These seven proteins are laccase-2, laccase-3, a protein belonging to the Kazal family, chitooligosaccharidolytic β-N-acetylglucosaminidase, beta-galactosidase, icarapin-like protein, and waprin-Thr1-like protein. Using quantitative real-time PCR (qRT-PCR), we also proved that the genes related to these seven proteins are specifically expressed in the venom glands. Finally, we revealed the functional role of S. nitobei venom in the physiological response of host trees. It can not only promote the colonization of symbiotic fungus but contribute to the development of eggs and larvae. This study provides a deeper understanding of the molecular mechanism of the woodwasp–pine interaction.

Lignocellulosic fibres surface interactions in enzymatic reaction using data-mining

Lignocellulosic fibres modification focused so far essentially on the resulting material properties to create functional fibres instead of determining the reaction influencing parameters. Using a data-mining algorithm, surface chemical composition of the fibres after modifications was compared to multiple signals. A 24 h reaction at either 25 °C or 60 °C, pH5 was conducted in presence of trans-ferulic acid, laccase, and lignocellulosic fibres (flax, hemp, or cellulose) having different chemical surface composition. Dimers and trimers were detected in variable concentrations in the reaction filtrate and extractive. At 25 °C, crystalline cellulose, amorphous cellulose, xylans, mannans, and lignins were well correlated to specific reaction products while at 60 °C, only lignins and xylan were found correlated to reaction products. Fibres surface composition affected the extractive profile. Lignocellulosic surface composition influence on the product formed was unveiled using a data mining approach. This study presents a way to unveil non-evident chemical interface interaction in reactions.

Halophilic archaea and their potential to generate renewable fuels and chemicals

Lignocellulosic biofuels and chemicals have great potential to reduce our dependence on fossil fuels and mitigate air pollution by cutting down on greenhouse gas emissions. Chemical, thermal, and enzymatic processes are used to release the sugars from the lignocellulosic biomass for conversion to biofuels. These processes often operate at extreme pH conditions, high salt concentrations, and/or high temperature. These harsh treatments add to the cost of the biofuels, as most known biocatalysts do not operate under these conditions. To increase the economic feasibility of biofuel production, microorganisms that thrive in extreme conditions are considered as ideal resources to generate biofuels and value-added products. Halophilic archaea (haloarchaea) are isolated from hypersaline ecosystems with high salt concentrations approaching saturation (1.5-5 M salt concentration) including environments with extremes in pH and/or temperature. The unique traits of haloarchaea and their enzymes that enable them to sustain catalytic activity in these environments make them attractive resources for use in bioconversion processes that must occur across a wide range of industrial conditions. Biocatalysts (enzymes) derived from haloarchaea occupy a unique niche in organic solvent, salt-based, and detergent industries. This review focuses on the use of haloarchaea and their enzymes to develop and improve biofuel production. The review also highlights how haloarchaea produce value-added products, such as antibiotics, carotenoids, and bioplastic precursors, and can do so using feedstocks considered "too salty" for most microbial processes including wastes from the olive-mill, shell fish, and biodiesel industries.

Biotransformation of lignocellulosic biomass into industrially relevant products with the aid of fungi-derived lignocellulolytic enzymes

Lignocellulosic material has drawn significant attention among the scientific community due to its year-round availability as a renewable resource for industrial consumption. Being an economic substrate alternative, various industries are reevaluating processes to incorporate derived compounds from these materials. Varieties of fungi and bacteria have the ability to depolymerize lignocellulosic biomass by synthesizing degrading enzymes. Owing to catalytic activity stability and high yields of conversion, lignocellulolytic enzymes derived from fungi currently have a high spectrum of industrial applications. Moreover, these materials are cost effective, eco-friendly and nontoxic while having a low energy input. Techno-economic analysis for current enzyme production technologies indicates that synthetic production is not commercially viable. Instead, the economic projection of the use of naturally-produced ligninolytic enzymes is promising. This approach may improve the economic feasibility of the process by lowering substrate expenses and increasing lignocellulosic by-product's added value. The present review will discuss the classification and enzymatic degradation pathways of lignocellulolytic biomass as well as the potential and current industrial applications of the involved fungal enzymes.

Ring-Closure Mechanisms Mediated by Laccase to Synthesize Phenothiazines, Phenoxazines, and Phenazines

The green and environmentally friendly synthesis of highly valuable organic substances is one possibility for the utilization of laccases (EC 1.10.3.2). As reactants for the herein described syntheses, different o-substituted arylamines or arylthiols and 2,5-dihydroxybenzoic acid and its derivatives were used. In this way, the formation of phenothiazines, phenoxazines, and phenazines was achieved in aqueous solution mediated by the laccase of Pycnoporus cinnabarinus in the presence of oxygen. Two types of phenothiazines (3-hydroxy- and 3-oxo-phenothiazines) formed in one reaction assay were described for the first time. The cyclization reactions yielded C-N, C-S, or C-O bonds. The syntheses were investigated with regard to the substitution pattern of the reaction partners. Differences in C-S and C-N bond formations without cyclization are discussed.

Structure and Bioactive Properties of Novel Textile Dyes Synthesised by Fungal Laccase

Novel sustainable processes involving oxidative enzymatic catalysts are considered as an alternative for classical organic chemistry. The unique physicochemical and bioactive properties of novel bio-products can be obtained using fungal laccase as catalyst. Among them are textile biodyes synthesised during oxidation of substrates belonging to the amine and methoxy organic derivatives. The process of synthesis occurs in mild conditions of pH, temperature, and pressure, and without using harmful oxidants. The effect of fungal laccase activity on the substrates mixture transformation efficiency was analysed in terms of antimicrobial dye synthesis on a large scale. Three new phenazine dyes, obtained in the presence of laccase from Cerrena unicolor, were studied for their structure and properties. The phenazine core structure of the products was a result of tri-molecular transformation of aminomethoxybenzoic acid and aminonaphthalene sulfonic acid isomers. One of the compounds from the synthesised dye, namely 10-((2-carboxy-6-methoxyphenyl)amino)-11-methoxybenzo[a]phenazine-8-carboxylic acid, was able to inhibit the growth of Staphylococcus aureus. The high concentration of substrates (5 g/L) was efficiently transformed during 72 h in the mild conditions of pH 4 with the use of laccase with an activity of 200 U per g of the substrates mixture. The new bioactive dye exhibited excellent dyeing properties with concomitant antibacterial and antioxidative activity. The proposed enzyme-mediated synthesis represents an alternative eco-friendly route for the synthesis of novel antimicrobial compounds with high importance for the medical textile industry.

Ligninolytic enzymes and its mechanisms for degradation of lignocellulosic waste in environment

Ligninolytic enzymes play a key role in degradation and detoxification of lignocellulosic waste in environment. The major ligninolytic enzymes are laccase, lignin peroxidase, manganese peroxidase, and versatile peroxidase. The activities of these enzymes are enhanced by various mediators as well as some other enzymes (feruloyl esterase, aryl-alcohol oxidase, quinone reductases, lipases, catechol 2, 3-dioxygenase) to facilitate the process for degradation and detoxification of lignocellulosic waste in environment. The structurally laccase is isoenzymes with monomeric or dimeric and glycosylation levels (10–45%). This contains four copper ions of three different types. The enzyme catalyzes the overall reaction: 4 benzenediol + O₂ to 4 benzosemiquinone + 2H₂O. While, lignin peroxidase is a glycoprotein molecular mass of 38–46 kDa containing one mole of iron protoporphyrin IX per one mol of protein, catalyzes the H₂O₂ dependent oxidative depolymerization of lignin. The manganese peroxidase is a glycosylated heme protein with molecular mass of 40–50kDa. It depolymerizes the lignin molecule in the presence of manganese ion. The versatile peroxidase has broad range substrate sharing typical features of the manganese and lignin peroxidase families. Although ligninolytic enzymes have broad range of industrial application specially the degradation and detoxification of lignocellulosic waste discharged from various industrial activities, its large scale application is still limited due to lack of limited production. Further, the extremophilic properties of ligninolytic enzymes indicated their broad prospects in varied environmental conditions. Therefore it needs more extensive research for understanding its structure and mechanisms for broad range commercial applications.

Laccase Properties, Physiological Functions, and Evolution

Discovered in 1883, laccase is one of the first enzymes ever described. Now, after almost 140 years of research, it seems that this copper-containing protein with a number of unique catalytic properties is widely distributed across all kingdoms of life. Laccase belongs to the superfamily of multicopper oxidases (MCOs)—a group of enzymes comprising many proteins with different substrate specificities and diverse biological functions. The presence of cupredoxin-like domains allows all MCOs to reduce oxygen to water without producing harmful byproducts. This review describes structural characteristics and plausible evolution of laccase in different taxonomic groups. The remarkable catalytic abilities and broad substrate specificity of laccases are described in relation to other copper-containing MCOs. Through an exhaustive analysis of laccase roles in different taxa, we find that this enzyme evolved to serve an important, common, and protective function in living systems.

Optimization of Growth Medium and Fermentation Conditions for the Production of Laccase3 from Cryphonectria parasitica Using Recombinant Saccharomyces cerevisiae

Statistical experimental methods were used to optimize the medium for mass production of a novel laccase3 (Lac3) by recombinant Saccharomyces cerevisiae TYEGLAC3-1. The basic medium was composed of glucose, casamino acids, yeast nitrogen base without amino acids (YNB w/o AA), tryptophan, and adenine. A one-factor-at-a-time approach followed by the fractional factorial design identified galactose, glutamic acid, and ammonium sulfate, as significant carbon, nitrogen, and mineral sources, respectively. The steepest ascent method and response surface methodology (RSM) determined that the optimal medium was (g/L): galactose, 19.16; glutamic acid, 5.0; and YNB w/o AA, 10.46. In this medium, the Lac3 activity (277.04 mU/mL) was 13.5 times higher than that of the basic medium (20.50 mU/mL). The effect of temperature, pH, agitation (rpm), and aeration (vvm) was further examined in a batch fermenter. The best Lac3 activity was 1176.04 mU/mL at 25 °C, pH 3.5, 100 rpm, and 1 vvm in batch culture.

Identification of novel cytochrome P450 monooxygenases from actinomycetes capable of intermolecular oxidative C-C coupling reactions

The cross-coupling reaction is one of the most important chemical reactions in the modern organic chemistry. Biocatalysts capable of catalyzing C-C coupling reactions are desired in the chemical industry for sustainable development. Cytochrome P450 monooxygenases (P450s) have received considerable attention as biocatalysts capable of catalyzing such reactions. Here, we focused on actinomycete P450s, which have high homology with CYP158A2, involved in the oxidative C-C coupling reaction for flaviolin dimerization in Streptomyces coelicolor A3(2). The screening of a chemical library composed of 426 aromatic compounds identified several combinations of P450s and their potential substrates. The type-I difference spectrum indicated that the identified substrates bind to the active sites of a P450, named StVI from Streptomyces violaceusniger. A redshift of the absorption maximum of the reaction products, together with LC-MS analysis suggested the presence of extended conjugate systems in the products through direct C-C coupling between two aromatic rings. The results demonstrated that actinomycete P450s have great potential to be utilized as biocatalysts for oxidative C-C coupling reactions and to facilitate the synthesis of diverse coupling products.

Screening and production of a potential extracellular fungal laccase from Penicillium chrysogenum: Media optimization by response surface methodology (RSM) and central composite rotatable design (CCRD)

This paper describes the isolation of potent extracellular-laccase producing white-rot fungus, identified by 18 s-rRNA as Penicillium-chrysogenum and its medium optimization by central-composite-rotatable-design using RSM. The optimum laccase-activity of 6.0 U ml-1 was obtained and maximum activity of 7.9 U ml-1 was achieved by statistical-optimization of the medium at 32 °C for 5 days. The molecular-weight of the laccase was found to be 67 kDa. UV-visible absorption-spectrum analysis shows peak at 600 nm and 325 nm corresponding to the type-I Cu(II) & type-III binuclear Cu(II) pair respectively confirming presence of laccase. The sharp endothermic peak at 150 °C and three-phases of protein denaturation was observed by DSC and TGA analysis for enzyme protein. The FT-IR analysis of laccase shows band at 1405cm-1, 1656 cm-1 &3400cm-1 corresponding to amide-I band, amide-II band and amino-acid group respectively. Results of the study show the enzyme is capable of carrying-out hydrolytic-cleavage of chemical-pollutants from the industrial waste-water for providing sustainable-greener environment.

Biotransformation of Huperzine A by Irpex lacteus-A fungal endophyte of Huperzia serrata

The biotransformation of huperzine A (hupA), one of the characteristic bioactive constituents of the medicinal plant Huperzia serrata, by a fungal endophyte of the host plant was studied. Two previously undescribed compounds 1-2, along with a known analog 8α,15α-epoxyhuperzine A (3), were isolated and identified. The structures of all the isolates were established by spectroscopic methods including NMR, MS, IR, and UV spectra. In particular, the absolute configurations of 1 and 2 were elucidated by CD spectra comparison and theoretic NOE strength calculation. In the LPS-induced neuro-inflammation injury assay, 1-3 exhibited moderate neuroprotective activity by increasing the viability of U251 cell lines with EC₅₀ values of 35.3 ± 0.9, 32.1 ± 0.9, and 50.3 ± 0.8 nM, respectively.

Novel textile dye obtained through transformation of 2-amino-3-methoxybenzoic acid by free and immobilised laccase from a Pleurotus ostreatus strain

Transformation of 2-amino-3-methoxybenzoic acid into novel and eco-friendly orange dye (N15) was performed using native and immobilised laccase (LAC) from Pleurotus ostreatus strain. A several parameters affecting laccase-mediated transformation efficiency included the selection of type and pH value of buffer, reaction temperature, substrate and laccase concentration as well as the type of carrier and LAC storage conditions were evaluated. The optimal conditions for N15 dye synthesis were 40 mM sodium-tartrate buffer pH 5.5 containing 3 mM of the substrate, efficiently transformed by 2 U of free laccase per 1 mmol of the substrate. Laccase was immobilised on porous Purolite® carriers, which had never been tested as a support for oxidoreductases. Immobilised laccase, characterised by a high immobilisation yield, was obtained by adsorption of laccase on a porous acrylic carrier with octadecyl groups (C₁₈) incubated in optimum conditions of 40 mM phosphate buffer pH 7.0 containing 1 mg of laccase per 1 g of the carrier (wet mass). The immobilised LAC showed the highest storage stability for 21 days and higher thermostability at 40 ℃ and 60 ℃ in comparison to its native form. The N15 dye showed good dyeing properties towards natural fibres, and the dyed fibre demonstrated resistance to different physicochemical factors during use, which was confirmed by commercial quality tests. The N15 dye is a phenazine, i.e. a heterogenic compound containing amino-, methoxy-, and three carboxyl functional groups with the molecular weight of approximately 449.37 U.

Synthesizing Polyaniline With Laccase/O2 as Catalyst

The polymerization of aniline to polyaniline (PANI) can be achieved chemically, electrochemically or enzymatically. In all cases, the products obtained are mixtures of molecules which are constituted by aniline units. Depending on the synthesis conditions there are variations (i) in the way the aniline molecules are connected, (ii) in the average number of aniline units per molecule, (iii) in the oxidation state, and (iv) in the degree of protonation. For many possible applications, the synthesis of electroconductive PANI with para-N-C-coupled aniline units in their half-oxidized and protonated state is of interest. This is the emeraldine salt form of PANI, abbreviated as PANI-ES. The enzymatic synthesis of PANI-ES is an environmentally friendly alternative to conventional chemical or electrochemical methods. Although many studies have been devoted to the in vitro synthesis of PANI-ES by using heme peroxidases with added hydrogen peroxide (H2O2) as the oxidant, the application of laccases is of particular interest since the oxidant for these multicopper enzymes is molecular oxygen (O2) from air, which is beneficial from environmental and economic points of view. In vivo, laccases participate in the synthesis and degradation of lignin. Various attempts of synthesizing PANI-ES with laccase/O2 in slightly acidic aqueous media from aniline or the linear aniline dimer PADPA (p-aminodiphenylamine) are summarized. Advances in the understanding of the positive effects of soft dynamic templates, as chemical structure guiding additives (anionic polyelectrolytes, micelles, or vesicles), for obtaining PANI-ES-rich products are highlighted. Conceptually, some of these template effects appear to be related to the effect "dirigent proteins" exert in the biosynthesis of lignin. In both cases intermediate radicals are formed enzymatically which then must react in a controlled way in follow-up reactions for obtaining the desired products. These follow-up reactions are controlled to some extent by the templates or specific proteins.

Laccase-Catalyzed Oxidation of Mixed Aqueous Phenolic Substrates at Low Concentrations

It has been proposed that Trametes versicolor laccase can be used to detoxify wastewaters that are contaminated with phenolic pollutants. However, the oxidation of phenols at low concentrations may be impacted if other substrates tend to interfere with or enhance the oxidation of the target substrate. To test this, experiments were conducted to evaluate effects arising from the simultaneous presence of mixed substrates including phenol (P), estradiol (E2), cumylphenol (CP), and triclosan (TCL), each of which are characterized by different rates of oxidation and tendencies to inactivate laccase. Slower and faster substrates were found to have only minor negative impacts upon the rate of conversion of targeted substrates, except where they tended to cause inactivation. No enhancements in substrate oxidation were observed. A multi-substrate kinetic model was shown to be able to accurately predict the time course of reactions of mixed substrates over extended periods at micromolar and sub-micromolar concentrations, except when estradiol and triclosan were simultaneously present. In this case, more enzyme inactivation was observed than would be expected from the oxidation of individual substrates alone. The utility of the model for providing insights into the reaction phenomenon and for evaluating the feasibility of oxidizing targeted substrates in the presence of other substrates is demonstrated.

Antifungal Activity against Botrytis cinerea of 2,6-Dimethoxy-4-(phenylimino)cyclohexa-2,5-dienone Derivatives

In this work the enzyme laccase from Trametes versicolor was used to synthetize 2,6-dimethoxy-4-(phenylimino)cyclohexa-2,5-dienone derivatives. Ten products with different substitutions in the aromatic ring were synthetized and characterized using ¹H- and 13C-NMR and mass spectrometry. The 3,5-dichlorinated compound showed highest antifungal activity against the phytopathogen Botrytis cinerea, while the p-methoxylated compound had the lowest activity; however, the antifungal activity of the products was higher than the activity of the substrates of the reactions. Finally, the results suggested that these compounds produced damage in the fungal cell wall.

A dynamic-coupling-reaction-based autonomous self-healing hydrogel with ultra-high stretching and adhesion properties

We synthesized a dynamic coupling-reaction based hydrogel that showed excellent mechanical and adhesion properties, super-high self-healing properties and good biocompatibility.

Bifunctional in vivo role of laccase exploited in multiple biotechnological applications

Laccases are multicopper enzymes present in plants, fungi, bacteria, and insects, which catalyze oxidation reactions together with four electron reduction of oxygen to water. Plant, bacterial, and insect laccases have a polymerizing role in nature, implicated in biosynthesis of lignin, melanin formation, and cuticle hardening, respectively. On the other hand, fungal laccases carry out both polymerizing (melanin synthesis and fruit body formation) as well as depolymerizing roles (lignin degradation). This bifunctionality of fungal laccases can be attributed to the presence of multiple isoforms within the same as well as different genus and species. Interestingly, by manipulating culture conditions, these isoforms with their different induction patterns and unique biochemical characteristics can be expressed or over-expressed for a targeted biotechnological application. Consequently, laccases can be considered as one of the most important biocatalyst which can be exploited for divergent industrial applications viz. paper pulp bleaching, fiber modification, dye decolorization, bioremediation as well as organic synthesis. The present review spotlights the role of fungal laccases in various antagonistic applications, i.e., polymerizing and depolymerizing, and co-relating this dual role with potential industrial significance.

Improvement of efficiency of brown coal biosolubilization by novel recombinant Fusarium oxysporum laccase

Clean coal technologies (e.g. coal biosolubilization) are of essential value, especially in Europe, where coal is the national wealth and other energy sources like crude oil are not available. Fusarium oxysporum LOCK 1134, the strain isolated from brown coal, efficiently biosolubilizes lignite. The obtained liquefied products contain 50% less sulfur and over 99% less mercury than the crude coal. Moreover, the liquefied coal can be modified further by laccase. In this study F. oxysporum laccase was expressed in Pichia pastoris for the first time and was assessed as an additional agent for coal degradation. The novel laccase contributes to humic and fulvic acids release from liquefied coal due to introduction of oxygen into coal structure. The effect is increased when a natural redox mediator, sinapic acid, is present in the reaction mixture-up to 30% and 80% respectively. Humic acids obtained by biological process are environmentally friendly fertilizers that may have stimulating effects on crop growth.

Decolorization and detoxification of textile dyes using a versatile Streptomyces laccase-natural mediator system

Currently, there is increasing interest in assessing the potential of bacterial laccases for industrial and environmental applications especially in harsh conditions. The environmental impact of the textile industry requires novel and effective technologies to mitigate the presence of dyes in wastewaters before discharging into the environment. Dyes usually remain stable in the presence of a variety of chemicals, light and are recalcitrant to microbial degradation. Among available technologies the biological treatments offer environmentally friendly strategies for decolorizing and detoxifying these compounds. The recent discovery of versatile laccases in streptomycetes opens up new opportunities for their commercial application. The aim of this study is to assess the potential of a novel bacterial laccase SilA produced by Streptomyces ipomoeae CECT 3341 active over wide temperature and pH ranges for use as an eco-friendly, biological treatment for the degradation of textile dyes. Insights into the enhancement of the oxidative action of this enzyme through the use of natural redox mediators are presented together with an assessment of the potential toxicity of the degradation products. Our results confirm that the combination of the laccase and natural mediators such as acetosyringone and methyl syringate enhanced the decolorization and detoxification of a variety of textile dyes up to sixfold and 20-fold, respectively. Mediator concentration was found to have a significant effect (p < 0.05) on dye decolorization at 60 °C; thus, the decolorization of Acid Orange 63 increased from 6 to 70-fold when the mediator concentration was increased from 0.1 to 0.5 mM. Further, the toxicity of tartrazine decreased 36-fold when the SilA-MeS system was used to decolorize the dye. The thermal properties of the SilA coupled with the stability of SilA at high pH suggest a potential commercial application for use in the decolorization of textile wastewaters which generally are performed at high temperature (>55 °C) and salinity and neutral pH, conditions which are unfavourable for conventional fungal laccases.

Enhanced laccase-mediated transformation of diclofenac and flufenamic acid in the presence of bisphenol A and testing of an enzymatic membrane reactor

The inadequate removal of pharmaceuticals and other micropollutants in municipal wastewater treatment plants, as evidenced by their detection of these substances in the aquatic environment has led to the need for sustainable remediation strategies. Laccases possess a number of advantages including a broad substrate spectrum. To identify promoting or inhibitory effects of reaction partners in the remediation processes we tested not only single compounds—as has been described in most studies—but also mixtures of pollutants. The reaction of diclofenac (DCF) and flufenamic acid (FA), mediated by Trametes versicolor laccase resulted in the formation of products, which were more hydrophilic than the respective reactant (reactant concentration of 0.1 mM; laccase activity 0.5 U/ml). Analyses (HPLC, LC/MS) showed that the product 1a and 1b for DCF and FA, respectively, to be a para-benzoquinone imine derivative. The formation of 1a was enhanced by the addition of bisphenol A (BPA). After 6 days 97% more product was formed in the mixture of DCF and BPA compared with DCF tested alone. Product 1a was also detected in experiments with micropollutant-supplemented secondary effluent. Within 24 h 67% and 100% of DCF and BPA were transformed, respectively (25 U/ml). Experiments with a membrane reactor (volume 10 l; phosphate buffer, pH 7) were in good agreement with the results of the laboratory scale experiments (50 ml). EC₅₀-values were also determined. The data support the use of laccases for the removal or detoxification of recalcitrant pollutants. Thus, the enzyme laccase may be a component of an additional environmentally friendly process for the treatment stage of wastewater remediation.

Laccase-Mediated Grafting on Biopolymers and Synthetic Polymers: A Critical Review

Laccase-mediated grafting on lignocelluloses has gained considerable attention as an environmentally benign method to covalently modify wood, paper and cork. In recent decades this technique has also been employed to modify fibres with a polysaccharide backbone, such as cellulose or chitosan, to infer colouration, antimicrobial activity or antioxidant activity to the material. The scope of this approach has been further widened by researchers, who apply mediators or high redox potential laccases and those that modify synthetic polymers and proteins. In all cases, the methodology relies on one- or two-electron oxidation of the surface functional groups or of the graftable molecule in solution. However, similar results can very often be achieved through simple deposition, even after extensive washing. This unintended adsorption of the active substance could have an adverse effect on the durability of the applied coating. Differentiating between actual covalent binding and adsorption is therefore essential, but proves to be challenging. This review not only covers excellent research on the topic of laccase-mediated grafting over the last five to ten years, but also provides a critical comparison to highlight either the lack or presence of compelling evidence for covalent grafting.