Purification and characterization of a multienzyme complex produced by Paenibacillus curdlanolyticus B-6

A novel amylolytic/xylanolytic/cellulolytic multienzyme complex from Clostridium manihotivorum that hydrolyzes polysaccharides in cassava pulp

Some anaerobic bacteria, particularly Clostridium species, produce extracellular cellulolytic and xylanolytic enzymes as multienzyme complexes (MECs). However, an amylolytic/xylanolytic/cellulolytic multienzyme complex (AXC-MEC) from anaerobic bacteria is rarely found. In this work, the glycoprotein AXC-MEC, composed of subunits of amylolytic, xylanolytic, and cellulolytic enzymes, was isolated from crude extracellular enzyme of the mesophilic anaerobic bacterium Clostridium manihotivorum CT4, grown on cassava pulp, using a milled cassava pulp column and Sephacryl S-500 gel filtration chromatography. The isolated AXC-MEC showed a single band upon native-polyacrylamide gel electrophoresis (native-PAGE). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed at least eight protein bands of the multienzyme complex which predominantly exhibited amylolytic enzyme activity, followed by xylanolytic and cellulolytic enzyme activities. The AXC-MEC is highly capable of degrading starch and non-starch polysaccharides present in cassava pulp into glucose and oligosaccharides, without conventional pretreatment. Base on the genomic analysis of C. manihotivorum CT4, we found no evidence of the known structural components of the well-known multienzyme complexes from Clostridium species, cellulosomes such as scaffoldin, cohesin, and dockerin, indicating that AXC-MEC from strain CT4 exhibit a different manner of assembly from the cellulosomes. These results suggest that AXC-MEC from C. manihotivorum CT4 is a new MEC capable of hydrolyzing cassava pulp into value-added products, which will benefit the starch industry. KEY POINTS: • Glycoprotein AXC-MEC was first reported in Clostridium manihotivorum. • Unlike cellulosomes, AXC-MEC consists of amylase, xylanase, and cellulase. • Glucose and oligosaccharides were hydrolysis products from cassava pulp by AXC-MEC.

Draft genome sequence data of the facultative, thermophilic, xylanolytic bacterium Paenibacillus sp. strain DA-C8

Thermophilic, facultatively anaerobic, xylanolytic bacterial strain DA-C8 (=JCM34211 =DSM111723), newly isolated from compost, shows strong beechwood xylan degradation ability. Whole-genome sequencing of strain DA-C8 on the Ion GeneStudio S5 system yielded 69 contigs with a total size of 3,110,565 bp, 2,877 protein-coding sequences, and a G+C content of 52.3 mol%. Genome annotation revealed that strain DA-C8 possesses debranching enzymes, such as β-L-arabinofuranosidase and polygalacturonase, that are important for efficient degradation of xylan. As inferred from 16S rRNA sequences and average nucleotide identity values, the closest relatives of strain DA-C8 are Paenibacillus cisolokensis and P. chitinolyticus. The genomic data have been deposited at the National Center for Biotechnology Information (NCBI) under accession number BMAQ00000000.

Draft genome sequence data of Paenbacillus curdlanolyticus B-6 possessing a unique xylanolytic-cellulolytic multienzyme system

Paenibacillus curdlanolyticus B-6 is a facultative anaerobic bacterium that efficiently produces a lignocellulolytic multienzyme complex. The whole genome of P. curdlanolyticus B-6 was sequenced on an Ion GeneStudio S5 system, which yielded 74 contigs with a total size of 4,875,097 bp, 4,473 protein-coding sequences, and a G+C content of 49.7%. The genome data have been deposited in DDBJ/ENA/GenBank under accession numbers BLWM01000001–BLWM01000074. Analyses of average nucleotide identities and phylogenetic relationships of 16S rRNA sequences of Paenibacillus species revealed that strain B-6 is most closely related to Paenibacillus xylaniclasticus TW1. P. curdlanolyticus B-6 should thus be reclassified as a strain of P. xylaniclasticus.

Molecular characterization of hypothetical scaffolding-like protein S1 in multienzyme complex produced by Paenibacillus curdlanolyticus B-6

Paenibacillus curdlanolyticus B-6 produces an extracellular multienzyme complex containing a hypothetical scaffolding-like protein and several xylanases and cellulases. The largest (280-kDa) component protein, called S1, has cellulose-binding ability and xylanase activity, thus was considered to function like the scaffolding proteins found in cellulosomes. S1 consists of 863 amino acid residues with predicted molecular mass 91,029 Da and includes two N-terminal surface layer homology (SLH) domains, but most of its sequence shows no homology with proteins of known function. Native S1 (nS1) was highly glycosylated. Purified nS1 and recombinant Xyn11A (rXyn11A) as a major xylanase subunit could assemble in a complex, but recombinant S1 (rS1) could not interact with rXyn11A, indicating that S1 glycosylation is necessary for assembly of the multienzyme complex. nS1 and rS1 showed weak, typical endo-xylanase activity, even though they have no homology with known glycosyl hydrolase family enzymes. S1 and its SLH domains bound tightly to the peptide-glycan layer of P. curdlanolyticus B-6, microcrystalline cellulose, and insoluble xylan, indicating that the SLHs of S1 bind to carbohydrate polymers and the cell surface. When nS1 and rXyn11A were co-incubated with birchwood xylan, the degradation ability was synergistically increased compared with that for each protein; however synergy was not observed for rS1 and rXynA. These results indicate that S1 may have a scaffolding protein-like function by interaction with enzyme subunits and polysaccharides through its glycosylated sites and SLH domains.

Designing cellulolytic enzyme systems for biorefinery: From nature to application

Cellulolytic enzymes play a key role on conversion of lignocellulosic plant biomass to biofuels and biochemicals in sugar platform biorefineries. In this review, we survey composite carbohydrate-active enzymes (CAZymes) among groups of cellulolytic fungi and bacteria that exist under aerobic and anaerobic conditions. Recent advances in designing effective cellulase mixtures are described, starting from the most complex microbial consortium-based enzyme preparations, to single-origin enzymes derived from intensively studied cellulase producers such as Trichoderma reesei, Talaromyces cellulolyticus, and Penicellium funiculosum, and the simplest minimal enzyme systems comprising selected sets of mono-component enzymes tailor-made for specific lignocellulosic substrates. We provide a comprehensive update on studies in developing high-performance cellulases for biorefineries.

Xylan supplement improves 1,3-propanediol fermentation by Clostridium butyricum

Lignocellulosic biomass as co-substrate enhances the 1,3-propanediol (1,3-PD) production of anaerobic fermenters by increasing their conversion yield from glycerol. To improve 1,3-propanediol (1,3-PD) production by this efficient approach, Clostridium butyricum I5-42 was supplemented with lignocellulosic biomasses (starch free fiber (CPF) from cassava pulp and xylan) as co-substrates. The 1,3-PD production and growth of C. butyricum were considerably higher in glycerol plus CPF and xylan than in glycerol alone, whereas another major polysaccharide (cellulose co-substrate) failed to improve the 1,3-PD production. C. butyricum I5-42 showed no degradation ability on cellulose powder, and only weak activity and slight growth on xylan. However CPF supplemented with xylan strongly enhanced the transcription levels of the major enzymes of 1,3-PD production (glycerol dehydratase, 1,3-propanediol dehydrogenase, and glycerol dehydrogenase). The intracellular redox reactions maintained equal balance in the supplemented media, suggesting that CPF plus xylan promotes 1,3-PD production in the reductive pathway. This promotion is probably mediated by NADH, which is effectively regenerated by small amounts of released oligosaccharides and subsequent activation of the glycerol oxidative pathway. Both supplements also improved the 1,3-PD production at high glycerol concentration. Therefore, supplementation with lignocellulolytic polysaccharides such as xylan can improve the production and productivity of 1,3-PD from glycerol in C. butyricum. Direct supplementation of CPF with xylan in 1,3-PD production has not been previously reported.

Decoding the complete arsenal for cellulose and hemicellulose deconstruction in the highly efficient cellulose decomposer Paenibacillus O199

BACKGROUND

The search for new enzymes and microbial strains to degrade plant biomass is one of the most important strategies for improving the conversion processes in the production of environment-friendly chemicals and biofuels. In this study, we report a new Paenibacillus isolate, O199, which showed the highest efficiency for cellulose deconstruction in a screen of environmental isolates. Here, we provide a detailed description of the complex multi-component O199 enzymatic system involved in the degradation of lignocellulose.

RESULTS

We examined the genome and the proteome of O199 grown on complex lignocellulose (wheat straw) and on microcrystalline cellulose. The genome contained 476 genes with domains assigned to carbohydrate-active enzyme (CAZyme) families, including 100 genes coding for glycosyl hydrolases (GHs) putatively involved in cellulose and hemicellulose degradation. Moreover, 31 % of these CAZymes were expressed on cellulose and 29 % on wheat straw. Proteomic analyses also revealed a complex and complete set of enzymes for deconstruction of cellulose (at least 22 proteins, including 4 endocellulases, 2 exocellulases, 2 cellobiohydrolases and 2 β-glucosidases) and hemicellulose (at least 28 proteins, including 5 endoxylanases, 1 β-xylosidase, 2 xyloglucanases, 2 endomannanases, 2 licheninases and 1 endo-β-1,3(4)-glucanase). Most of these proteins were secreted extracellularly and had numerous carbohydrate-binding domains (CBMs). In addition, O199 also secreted a high number of substrate-binding proteins (SBPs), including at least 42 proteins binding carbohydrates. Interestingly, both plant lignocellulose and crystalline cellulose triggered the production of a wide array of hydrolytic proteins, including cellulases, hemicellulases, and other GHs.

CONCLUSIONS

Our data provide an in-depth analysis of the complex and complete set of enzymes and accessory non-catalytic proteins-GHs, CBMs, transporters, and SBPs-implicated in the high cellulolytic capacity shown by this bacterial strain. The large diversity of hydrolytic enzymes and the extracellular secretion of most of them supports the use of Paenibacillus O199 as a candidate for second-generation technologies using paper or lignocellulosic agricultural wastes.

The GH67 α-glucuronidase of Paenibacillus curdlanolyticus B-6 removes hexenuronic acid groups and facilitates biodegradation of the model xylooligosaccharide hexenuronosyl xylotriose

4-O-Methylglucuronic acid (MeGlcA) side groups attached to the xylan backbone through α-1,2 linkages are converted to hexenuronic acid (HexA) during alkaline pulping. α-Glucuronidase (EC 3.2.1.139) hydrolyzes 1,2-linked MeGlcA from xylooligosaccharides. To determine whether α-glucuronidase can also hydrolyze HexA-decorated xylooligosaccharides, a gene encoding α-glucuronidase (AguA) was cloned from Paenibacillus curdlanolyticus B-6. The purified protein degraded hexenuronosyl xylotriose (ΔX3), a model substrate prepared from kraft pulp. AguA released xylotriose and HexA from ΔX3, but the Vmax and kcat values for ΔX3 were lower than those for MeGlcA, indicating that HexA side groups may affect the hydrolytic activity. To explore the potential for biological bleaching, ΔX3 degradation was performed using intracellular extract from P. curdlanolyticus B-6. The intracellular extract, with synergistic α-glucuronidase and β-xylosidase activities, degraded ΔX3 to xylose and HexA. These results indicate that α-glucuronidase can be used to remove HexA from ΔX3 derived from pulp, reducing the need for chemical treatments in the pulping process.

Biodegradation of palm kernel cake by cellulolytic and hemicellulolytic bacterial cultures through solid state fermentation

Four cellulolytic and hemicellulolytic bacterial cultures were purchased from the Leibniz Institute DSMZ-German Collection of Microorganisms and Cell Culture (DSMZ) and the American Type Culture Collection (ATCC). Two experiments were conducted; the objective of the first experiment was to determine the optimum time period required for solid state fermentation (SSF) of palm kernel cake (PKC), whereas the objective of the second experiment was to investigate the effect of combinations of these cellulolytic and hemicellulolytic bacteria on the nutritive quality of the PKC. In the first experiment, the SSF was lasted for 12 days with inoculum size of 10% (v/w) on different PKC to moisture ratios. In the second experiment, fifteen combinations were created among the four microbes with one untreated PKC as a control. The SSF lasted for 9 days, and the samples were autoclaved, dried, and analyzed for proximate analysis. Results showed that bacterial cultures produced high enzymes activities at the 4th day of SSF, whereas their abilities to produce enzymes tended to be decreased to reach zero at the 8th day of SSF. Findings in the second experiment showed that hemicellulose and cellulose was significantly (P < 0.05) decreased, whereas the amount of reducing sugars were significantly (P < 0.05) increased in the fermented PKC (FPKC) compared with untreated PKC.

Characterization of cellulolytic bacterial cultures grown in different substrates

Nine aerobic cellulolytic bacterial cultures were obtained from the Leibniz Institute DSMZ-German Collection of Microorganisms and Cell Culture (DSMZ) and the American Type Culture Collection (ATCC). The objectives of this study were to characterize the cellulolytic bacteria and to determine the optimum moisture ratio required for solid state fermentation (SSF) of palm kernel cake (PKC). The bacteria cultures were grown on reconstituted nutrient broth, incubated at 30°C and agitated at 200 rpm. Carboxymethyl cellulase, xylanase, and mannanase activities were determined using different substrates and after SSF of PKC. The SSF was conducted for 4 and 7 days with inoculum size of 10% (v/w) on different PKC concentration-to-moisture ratios: 1 : 0.2, 1 : 0.3, 1 : 0.4, and 1 : 0.5. Results showed that Bacillus amyloliquefaciens 1067 DSMZ, Bacillus megaterium 9885 ATCC, Paenibacillus curdlanolyticus 10248 DSMZ, and Paenibacillus polymyxa 842 ATCC produced higher enzyme activities as compared to other bacterial cultures grown on different substrates. The cultures mentioned above also produced higher enzyme activities when they were incubated under SSF using PKC as a substrate in different PKC-to-moisture ratios after 4 days of incubation, indicating that these cellulolytic bacteria can be used to degrade and improve the nutrient quality of PKC.

A novel α-L-arabinofuranosidase of family 43 glycoside hydrolase (Ct43Araf) from Clostridium thermocellum

The study describes a comparative analysis of biochemical, structural and functional properties of two recombinant derivatives from Clostridium thermocellum ATCC 27405 belonging to family 43 glycoside hydrolase. The family 43 glycoside hydrolase encoding α-L-arabinofuranosidase (Ct43Araf) displayed an N-terminal catalytic module CtGH43 (903 bp) followed by two carbohydrate binding modules CtCBM6A (405 bp) and CtCBM6B (402 bp) towards the C-terminal. Ct43Araf and its truncated derivative CtGH43 were cloned in pET-vectors, expressed in Escherichia coli and functionally characterized. The recombinant proteins displayed molecular sizes of 63 kDa (Ct43Araf) and 34 kDa (CtGH43) on SDS-PAGE analysis. Ct43Araf and CtGH43 showed optimal enzyme activities at pH 5.7 and 5.4 and the optimal temperature for both was 50°C. Ct43Araf and CtGH43 showed maximum activity with rye arabinoxylan 4.7 Umg(-1) and 5.0 Umg(-1), respectively, which increased by more than 2-fold in presence of Ca(2+) and Mg(2+) salts. This indicated that the presence of CBMs (CtCBM6A and CtCBM6B) did not have any effect on the enzyme activity. The thin layer chromatography and high pressure anion exchange chromatography analysis of Ct43Araf hydrolysed arabinoxylans (rye and wheat) and oat spelt xylan confirmed the release of L-arabinose. This is the first report of α-L-arabinofuranosidase from C. thermocellum having the capacity to degrade both p-nitrophenol-α-L-arabinofuranoside and p-nitrophenol-α-L-arabinopyranoside. The protein melting curves of Ct43Araf and CtGH43 demonstrated that CtGH43 and CBMs melt independently. The presence of Ca(2+) ions imparted thermal stability to both the enzymes. The circular dichroism analysis of CtGH43 showed 48% β-sheets, 49% random coils but only 3% α-helices.

Exploration of the key microbes involved in the cellulolytic activity of a microbial consortium by serial dilution

A highly cellulolytic consortium was serially diluted and incubated in fermentation medium with filter paper as carbon sources. The critical dilution point of the consortium for effective degradation of filter paper was 10(-5) as further dilution resulted in the loss of degradation ability of filter paper accompanied by the disappearance of four bands in denaturing gradient gel electrophoresis profiles. The loss of bands corresponding to 16S rRNA sequences from Clostridium clariflavum DSM 19732 and a Paenibacillus species coincided with the loss of degradation ability of filter paper.

Characterization of Xyn30A and Axh43A of Bacillus licheniformis SVD1 identified by its genomic analysis

The genome sequence of Bacillus licheniformis SVD1, that produces a cellulolytic and hemi-cellulolytic multienzyme complex, was partially determined, indicating that the glycoside hydrolase system of this strain is highly similar to that of B. licheniformis ATCC14580. All of the fifty-six genes encoding glycoside hydrolases identified in B. licheniformis ATCC14580 were conserved in strain SVD1. In addition, two new genes, xyn30A and axh43A, were identified in the B. licheniformis SVD1 genome. The xyn30A gene was highly similar to Bacillus subtilis subsp. subtilis 168 xynC encoding for a glucuronoarabinoxylan endo-1,4-β-xylanase. Xyn30A, produced by a recombinant Escherichia coli, had high activity toward 4-O-methyl-D-glucurono-D-xylan but showed definite activity toward oat-spelt xylan and unsubstituted xylooligosaccharides. Recombinant Axh43A, consisting of a family-43 catalytic module of the glycoside hydrolases and a family-6 carbohydrate-binding module (CBM), was an arabinoxylan arabinofuranohydrolase (α-L-arabinofuranosidase) classified as AXH-m23 and capable of releasing arabinosyl residues, which are linked to the C-2 or C-3 position of singly substituted xylose residues in arabinoxylan or arabinoxylan oligomers. The isolated CBM polypeptide had an affinity for soluble and insoluble xylans and removal of the CBM from Axh43A abolished the catalytic activity of the enzyme, indicating that the CBM plays an essential role in hydrolysis of arabinoxylan.

GH11 xylanases: Structure/function/properties relationships and applications

For technical, environmental and economical reasons, industrial demands for process-fitted enzymes have evolved drastically in the last decade. Therefore, continuous efforts are made in order to get insights into enzyme structure/function relationships to create improved biocatalysts. Xylanases are hemicellulolytic enzymes, which are responsible for the degradation of the heteroxylans constituting the lignocellulosic plant cell wall. Due to their variety, xylanases have been classified in glycoside hydrolase families GH5, GH8, GH10, GH11, GH30 and GH43 in the CAZy database. In this review, we focus on GH11 family, which is one of the best characterized GH families with bacterial and fungal members considered as true xylanases compared to the other families because of their high substrate specificity. Based on an exhaustive analysis of the sequences and 3D structures available so far, in relation with biochemical properties, we assess biochemical aspects of GH11 xylanases: structure, catalytic machinery, focus on their "thumb" loop of major importance in catalytic efficiency and substrate selectivity, inhibition, stability to pH and temperature. GH11 xylanases have for a long time been used as biotechnological tools in various industrial applications and represent in addition promising candidates for future other uses.

Characterization of Paenibacillus curdlanolyticus B-6 Xyn10D, a xylanase that contains a family 3 carbohydrate-binding module

Paenibacillus curdlanolyticus B-6 Xyn10D is a xylanase containing a family 3 carbohydrate-binding module (CBM3). Biochemical analyses using recombinant proteins derived from Xyn10D suggested that the CBM3 polypeptide has an affinity for cellulose and xylan and that CBM3 in Xyn10D is important for hydrolysis of insoluble arabinoxylan and natural biomass.