Probing C-terminal interactions of the Pseudomonas stutzeri cyanide-degrading CynD protein

Recent Progress in the Production of Cyanide-Converting Nitrilases—Comparison with Nitrile-Hydrolyzing Enzymes

Nitrilases have a high potential for application in organic chemistry, environmental technology, and analytics. However, their industrial uses require that they are produced in highly active and robust forms at a reasonable cost. Some organic syntheses catalyzed by nitrilases have already reached a high level of technological readiness. This has been enabled by the large-scale production of recombinant catalysts. Despite some promising small-scale methods being proposed, the production of cyanide-converting nitrilases (cyanide hydratase and cyanide dihydratase) is lagging in this regard. This review focuses on the prospects of cyanide(di)hydratase-based catalysts. The current knowledge of these enzymes is summarized and discussed in terms of the origin and distribution of their sequences, gene expression, structure, assays, purification, immobilization, and uses. Progresses in the production of other nitrilase catalysts are also tackled, as it may inspire the development of the preparation processes of cyanide(di)hydratases.

Genomic Characterization of Bacillus safensis Isolated from Mine Tailings in Peru and Evaluation of Its Cyanide-Degrading Enzyme CynD

Understanding the biochemistry and metabolic pathways of cyanide degradation is necessary to improve the efficacy of cyanide bioremediation processes and industrial requirements. We have isolated and sequenced the genome of a cyanide-degrading Bacillus strain from water in contact with mine tailings from Lima, Peru. This strain was classified as Bacillus safensis based on 16S rRNA gene sequencing and core genome analyses and named B. safensis PER-URP-08. We searched for possible cyanide-degradation enzymes in the genome of this strain and identified a putative cyanide dihydratase (CynD) gene similar to a previously characterized CynD from Bacillus pumilus C1. Sequence analysis of CynD from B. safensis and B. pumilus allow us to identify C-terminal residues that differentiate both CynDs. We then cloned, expressed in Escherichia coli, and purified recombinant CynD from B. safensis PER-URP-08 (CynD_PER-URP-08) and showed that in contrast to CynD from B. pumilus C1, this recombinant CynD remains active at up to pH 9. We also showed that oligomerization of CynD_PER-URP-08 decreases as a function of increased pH. Finally, we demonstrated that transcripts of CynD_PER-URP-08 in B. safensis PER-URP-08 are strongly induced in the presence of cyanide. Our results suggest that the use of B. safensis PER-URP-08 and CynD_PER-URP-08 as potential tool for cyanide bioremediation warrants further investigation. IMPORTANCE Despite being of environmental concern around the world due to its toxicity, cyanide continues to be used in many important industrial processes. Thus, searching for cyanide bioremediation methods is a matter of societal concern and must be present on the political agenda of all governments. Here, we report the isolation, genome sequencing and characterization of cyanide degradation capacity of a bacterial strain isolated from an industrial mining site in Peru. We characterize a cyanide dehydratase (CynD) homolog from one of these bacteria, Bacillus safensis PER-URP-08.

Application Potential of Cyanide Hydratase from Exidia glandulosa: Free Cyanide Removal from Simulated Industrial Effluents

Industries such as mining, cokemaking, (petro)chemical and electroplating produce effluents that contain free cyanide (fCN = HCN + CN−). Currently, fCN is mainly removed by (physico)chemical methods or by biotreatment with activated sludge. Cyanide hydratases (CynHs) (EC 4.2.1.66), which convert fCN to the much less toxic formamide, have been considered for a mild approach to wastewater decyanation. However, few data are available to evaluate the application potential of CynHs. In this study, we used a new CynH from Exidia glandulosa (protein KZV92691.1 designated NitEg by us), which was overproduced in Escherichia coli. The purified NitEg was highly active for fCN with 784 U/mg protein, kcat 927/s and kcat/KM 42/s/mM. It exhibited optimal activities at pH approximately 6–9 and 40–45 °C. It was quite stable in this pH range, and retained approximately 40% activity at 37 °C after 1 day. Silver and copper ions (1 mM) decreased its activity by 30–40%. The removal of 98–100% fCN was achieved for 0.6–100 mM fCN. Moreover, thiocyanate, sulfide, ammonia or phenol added in amounts typical of industrial effluents did not significantly reduce the fCN conversion, while electroplating effluents may need to be diluted due to high fCN and metal content. The ease of preparation of NitEg, its high specific activity, robustness and long shelf life make it a promising biocatalyst for the detoxification of fCN.

From sequence to function: a new workflow for nitrilase identification

Abstract

Nitrilases are industrially important biocatalysts due to their ability to degrade nitriles to carboxylic acids and ammonia. In this study, a workflow for simple and fast recovery of nitrilase candidates from metagenomes is presented. For identification of active enzymes, a NADH-coupled high-throughput assay was established. Purification of enzymes could be omitted as the assay is based on crude extract containing the expressed putative nitrilases. In addition, long incubation times were avoided by combining nitrile and NADH conversion in a single reaction. This allowed the direct measurement of nitrile degradation and provided not only insights into substrate spectrum and specificity but also in degradation efficiency. The novel assay was used for investigation of candidate nitrilase-encoding genes. Seventy putative nitrilase-encoding gene and the corresponding deduced protein sequences identified during sequence-based screens of metagenomes derived from nitrile-treated microbial communities were analyzed. Subsequently, the assay was applied to 13 selected candidate genes and proteins. Six of the generated corresponding Escherichia coli clones produced nitrilases that showed activity and one unusual nitrilase was purified and analyzed. The activity of the novel arylacetonitrilase Nit09 exhibited a broad pH range and a high long-term stability. The enzyme showed high activity for arylacetonitriles with a K_M of 1.29 mM and a V_max of 13.85 U/mg protein for phenylacetonitrile. In conclusion, we provided a setup for simple and rapid analysis of putative nitrilase-encoding genes from sequence to function. The suitability was demonstrated by identification, isolation, and characterization of the arylacetonitrilase.

Key points

• A simple and fast high-throughput nitrilase screening was developed.

• A set of putative nitrilases was successfully screened with the assay.

• A novel arylacetonitrilase was identified, purified, and characterized in detail.

Electronic supplementary material

The online version of this article (10.1007/s00253-020-10544-9) contains supplementary material, which is available to authorized users.

Cryo-EM and directed evolution reveal how Arabidopsis nitrilase specificity is influenced by its quaternary structure

Nitrilases are helical enzymes that convert nitriles to acids and/or amides. All plants have a nitrilase 4 homolog specific for ß-cyanoalanine, while in some plants neofunctionalization has produced nitrilases with altered specificity. Plant nitrilase substrate size and specificity correlate with helical twist, but molecular details of this relationship are lacking. Here we determine, to our knowledge, the first close-to-atomic resolution (3.4 Å) cryo-EM structure of an active helical nitrilase, the nitrilase 4 from Arabidopsis thaliana. We apply site-saturation mutagenesis directed evolution to three residues (R95, S224, and L169) and generate a mutant with an altered helical twist that accepts substrates not catalyzed by known plant nitrilases. We reveal that a loop between α2 and α3 limits the length of the binding pocket and propose that it shifts position as a function of helical twist. These insights will allow us to start designing nitrilases for chemoenzymatic synthesis.

Cyanide bioremediation: the potential of engineered nitrilases

The cyanide-degrading nitrilases are of notable interest for their potential to remediate cyanide contaminated waste streams, especially as generated in the gold mining, pharmaceutical, and electroplating industries. This review provides a brief overview of cyanide remediation in general but with a particular focus on the cyanide-degrading nitrilases. These are of special interest as the hydrolysis reaction does not require secondary substrates or cofactors, making these enzymes particularly good candidates for industrial remediation processes. The genetic approaches that have been used to date for engineering improved enzymes are described; however, recent structural insights provide a promising new approach.

Bacillus pumilus Cyanide Dihydratase Mutants with Higher Catalytic Activity

Cyanide degrading nitrilases are noted for their potential to detoxify industrial wastewater contaminated with cyanide. However, such application would benefit from an improvement to characteristics such as their catalytic activity and stability. Following error-prone PCR for random mutagenesis, several cyanide dihydratase mutants from Bacillus pumilus were isolated based on improved catalysis. Four point mutations, K93R, D172N, A202T, and E327K were characterized and their effects on kinetics, thermostability and pH tolerance were studied. K93R and D172N increased the enzyme’s thermostability whereas E327K mutation had a less pronounced effect on stability. The D172N mutation also increased the affinity of the enzyme for its substrate at pH 7.7 but lowered its k_cat. However, the A202T mutation, located in the dimerization or the A surface, destabilized the protein and abolished its activity. No significant effect on activity at alkaline pH was observed for any of the purified mutants. These mutations help confirm the model of CynD and are discussed in the context of the protein–protein interfaces leading to the protein quaternary structure.