Development of an efficient genetic manipulation strategy for sequential gene disruption and expression of different heterologous GFP genes in Candida tropicalis

Engineering the oleaginous yeast Candida tropicalis for α-humulene overproduction

Background

α-Humulene is a plant-derived monocyclic sesquiterpenoid with multiple pharmacological activities, and far-reaching potential for the development of new drugs. Currently, the production of α-humulene is typically achieved via plant extraction, which is not sustainable and limited by low yields. The oleaginous yeast Candida tropicalis has recently emerged as a valuable host for producing high-value-added chemicals. However, the potential of C. tropicalis for terpenoid production has not been exploited.

Results

In this study, C. tropicalis was engineered for de novo synthesis of α-humulene from glucose. To improve α-humulene production, the codon-optimised α-humulene synthase gene and the entire endogenous farnesyl diphosphate synthesis pathway were co-overexpressed. Furthermore, bottlenecks in the α-humulene synthase pathway were identified and relieved by overexpressing α-humulene synthase, acetoacetyl-CoA thiolase and NADH-dependent HMG-CoA reductase. Combined with fermentation medium optimisation, the engineered strain produced 195.31 mg/L of α-humulene in shake flasks and 4115.42 mg/L in a bioreactor through fed-batch fermentation, a 253- and 5345-fold increase over the initial production, respectively.

Conclusions

This study demonstrates the potential of C. tropicalis for α-humulene production, and presents a platform for the biosynthesis of other terpenoids.

Development of a gRNA Expression and Processing Platform for Efficient CRISPR-Cas9-Based Gene Editing and Gene Silencing in Candida tropicalis

Candida tropicalis, a nonmodel diploid microbe, has been applied in industry as a chassis cell. Metabolic engineering of C. tropicalis is challenging due to a lack of gene editing and regulation tools. Here, we report a tRNA:guide RNA (gRNA) platform for boosting gene editing and silencing efficiency in C. tropicalis. As the endogenous tRNA-processing system enables autocleavage for producing a large number of mature gRNAs, a tRNAGly sequence from the genome of C. tropicalis ATCC 20336 was selected for constructing the tRNA:gRNA platform. In the CRISPR-Cas9 system, the tRNA:gRNA platform proved to be efficient in single-gene and multi-gene editing. Furthermore, based on the tRNA:gRNA platform, a CRISPR interference (CRISPRi) system was developed to construct an efficient dCas9-mediated gene expression regulation system for C. tropicalis. The CRISPRi system was employed to regulate the expression of the exogenous gene GFP3 (green fluorescent protein) and the endogenous gene ADE2 (phosphoribosylaminoimidazole carboxylase). Different regions of GFP3 and ADE2 were targeted with the gRNAs processed by the tRNAGly, and the transcription levels of GFP3 and ADE2 were successfully downregulated to 23.9% ± 4.1% and 38.0% ± 7.4%, respectively. The effects of the target regions on gene regulation were also investigated. Additionally, the regulation system was applied to silence ERG9 (squalene synthase) to enhance β-carotene biosynthesis in a metabolically modified C. tropicalis strain. The results suggest that the endogenous tRNAGly and the CRISPRi system have great potential for metabolic engineering of C. tropicalis. IMPORTANCE In the nonmodel yeast Candida tropicalis, a lack of available RNA polymerase type III (Pol III) promoters hindered the development of guide RNA (gRNA) expression platforms for the establishment of CRISPR-Cas-mediated genome editing and silencing strategies. Here, a tRNA:gRNA platform was constructed. We show that this platform allows efficient and precise expression and processing of different gRNAs from a single polycistronic gene capable of mediating multi-gene editing in combination with CRISPR-Cas9. Furthermore, in combination with dCas9, the tRNA:gRNA platform was efficiently used for silencing of exogenous and endogenous genes, representing the first CRISPR interference tool (CRISPRi) in C. tropicalis. Importantly, the established CRISPRi-tRNA:gRNA tool was also used for metabolic engineering by regulating β-carotene biosynthesis in C. tropicalis. The results suggest that the tRNA:gRNA platform and the CRISPRi system will further advance the application of the CRISPR-Cas-based editing and CRISPRi systems for metabolic engineering in C. tropicalis.

Stepwise metabolic engineering of Candida tropicalis for efficient xylitol production from xylose mother liquor

Background

Commercial xylose purification produces xylose mother liquor (XML) as a major byproduct, which has become an inexpensive and abundant carbon source. A portion of this XML has been used to produce low-value-added products such as caramel but the remainder often ends up as an organic pollutant. This has become an issue of industrial concern. In this study, a uracil-deficient Candida tropicalis strain was engineered to efficiently convert XML to the commercially useful product xylitol.

Results

The xylitol dehydrogenase gene was deleted to block the conversion of xylitol to xylulose. Then, an NADPH regeneration system was added through heterologous expression of the Yarrowia lipolytica genes encoding 6-phosphate-gluconic acid dehydrogenase and 6-phosphate-glucose dehydrogenase. After process optimization, the engineered strain, C. tropicalis XZX-B4ZG, produced 97.10 g L^− 1 xylitol in 120 h from 300 g L^− 1 XML in a 5-L fermenter. The xylitol production rate was 0.82 g L^− 1 h^− 1 and the conversion rate was 92.40 %.

Conclusions

In conclusion, this study performed a combination of metabolic engineering and process optimizing in C. tropicalis to enhance xylitol production from XML. The use of C. tropicalis XZX-B4ZG, therefore, provided a convenient method to transform the industrial by-product XML into the useful material xylitol.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01596-1.

A CRISPR-Cas9 system for multiple genome editing and pathway assembly in Candida tropicalis

Genetic manipulation is among the most important tools for synthetic biology; however, modifying multiple genes is extremely time-consuming and can sometimes be impossible when dealing with gene families. Here, we present a clustered regularly interspaced short palindromic repeat (CRISPR) and CRISPR-associated protein 9 (Cas9) system for use in the diploid yeast Candida tropicalis that is vastly superior to traditional techniques. This system enables the rapid and reliable introduction of multiple genetic deletions or mutations, as well as a stable expression using an integrated CRISPR-Cas9 cassette or a transient CRISPR-Cas9 cassette, together with a short donor DNA. We further show that the system can be used to promote the in vivo assembly of multiple DNA fragments and their stable integration into a target locus (or loci) in C. tropicalis. Based on this system, we present a platform for the biosynthesis of β-carotene and its derivatives. These results enable the practical application of C. tropicalis and the application of the system to other organisms.

Plasmid-Based CRISPR-Cas9 Gene Editing in Multiple Candida Species

Candida species are a major cause of infection worldwide. The species associated with infection vary with geographical location and with patient population. Infection with Candida tropicalis is particularly common in South America and Asia, and Candida parapsilosis infections are more common in the very young. Molecular methods for manipulating the genomes of these species are still lacking. We describe a simple and efficient CRISPR-based gene editing system that can be applied in the C. parapsilosis species group, including the sister species Candida orthopsilosis and Candida metapsilosis. We have also constructed a separate system for gene editing in C. tropicalis.

Many Candida species that cause infection have diploid genomes and do not undergo classical meiosis. The application of clustered regularly interspaced short palindromic repeat-Cas9 (CRISPR-Cas9) gene editing systems has therefore greatly facilitated the generation of gene disruptions and the introduction of specific polymorphisms. However, CRISPR methods are not yet available for all Candida species. We describe here an adaption of a previously developed CRISPR system in Candida parapsilosis that uses an autonomously replicating plasmid. Guide RNAs can be introduced in a single cloning step and are released by cleavage between a tRNA and a ribozyme. The plasmid also contains CAS9 and a selectable nourseothricin SAT1 marker. It can be used for markerless editing in C. parapsilosis, C. orthopsilosis, and C. metapsilosis. We also show that CRISPR can easily be used to introduce molecular barcodes and to reintroduce wild-type sequences into edited strains. Heterozygous mutations can be generated, either by careful selection of the distance between the polymorphism and the Cas9 cut site or by providing two different repair templates at the same time. In addition, we have constructed a different autonomously replicating plasmid for CRISPR-Cas9 editing in Candida tropicalis. We show that editing can easily be carried out in multiple C. tropicalis isolates. Nonhomologous end joining (NHEJ) repair occurs at a high level in C. metapsilosis and C. tropicalis.

IMPORTANCECandida species are a major cause of infection worldwide. The species associated with infection vary with geographical location and with patient population. Infection with Candida tropicalis is particularly common in South America and Asia, and Candida parapsilosis infections are more common in the very young. Molecular methods for manipulating the genomes of these species are still lacking. We describe a simple and efficient CRISPR-based gene editing system that can be applied in the C. parapsilosis species group, including the sister species Candida orthopsilosis and Candida metapsilosis. We have also constructed a separate system for gene editing in C. tropicalis.