The impact of electron donors and anode potentials on the anode-respiring bacteria community

Towards rapid formation of electroactive biofilm: insights from thermodynamics and electric field manipulation

Electroactive biofilm (EAB) has garnered significant attention due to its effectiveness in pollutant remediation, electricity generation, and chemical synthesis. However, achieving precise control over the rapid formation of EAB presents challenges for the practical implementation of bioelectrochemical technology. In this study, we investigated the regulation of EAB formation by manipulating applied electric potential. We developed a modified XDLVO model for the applied electric field and quantitatively assessed the feasibility of existing rapid formation strategies for EAB. Our results revealed that electrostatic (EL) force significantly influenced EAB formation in the presence of the applied electric field, with the potential difference between the electrode and the microbial solution being the primary determinant of EL force. Compared to -0.2 V and 0 V vs.Ag/AgCl, EAB exhibited the highest electrochemical performance at 0.2 V vs.Ag/AgCl, with a maximum current density of 6.044 ± 0.10 A/m2, surpassing that at -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl by 1.73 times and 1.31 times, respectively. Furthermore, EAB demonstrated the highest biomass accumulation, measuring a thickness of 25 ± 2 μm at 0.2 V vs. Ag/AgCl, representing increases of 1.67 and 1.25 times compared to -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl, respectively. The strong electrostatic attraction under the anodic potential promoted the formation of a monolayer of biofilm. Additionally, the hydrophilicity and hydrophobicity of the biofilm were altered following inversion culture. The Lewis acid-base (AB) attraction offset the electrostatic repulsion caused by negative charges, it is beneficial for the formation of biofilms. This study, for the first time, elucidated the difference in the formation of cathode and anode biofilm from a thermodynamic perspective in the context of electric field introduction, laying the theoretical foundation for the directional regulation of the rapid formation of typical electroactive biofilms.

Paradigm shift in Nutrient-Energy-Water centered sustainable wastewater treatment system through synergy of bioelectrochemical system and anaerobic digestion

With advancements in research and the necessity of improving the performance of bioelectrochemical system (BES), coupling anaerobic digestion (AD) with BES is crucial for energy gain from wastewater and bioremediation. Hybridization of BES-AD concept opens new avenues for pollutant degradation, carbon capture and nutrient-resource recovery from wastewater. The strength of merging BES-AD lies in synergy, and this approach was employed to differentiate fads from strategies with the potential for full-scale implementation and making it an energy-positive system. The integration of BES and AD system increases the overall performance and complexity of combined system and the cost of operation. From a technical standpoint, the primary determinants of BES-AD feasibility for field applications are the scalability and economic viability. High potential market for such integrated system attract industrial partners for more industrial trials and investment before commercialization. However, BES-AD with high energy efficacy and negative economics demands performance boost.

Enhancing biocathode denitrification performance with nano-Fe3O4 under polarity period reversal

The presence of excessive concentrations of nitrate poses a threat to both the environment and human health, and the bioelectrochemical systems (BESs) are attractive green technologies for nitrate removal. However, the denitrification efficiency in the BESs is still limited by slow biofilm formation and nitrate removal. In this work, we demonstrate the efficacy of novel combination of magnetite nanoparticles (nano-Fe3O4) with the anode-cathode polarity period reversal (PPR-Fe3O4) for improving the performance of BESs. After only two-week cultivation, the highest cathodic current density (7.71 ± 1.01 A m-2) and NO3--N removal rate (8.19 ± 0.97 g m-2 d-1) reported to date were obtained in the PPR-Fe3O4 process (i.e., polarity period reversal with nano-Fe3O4 added) at applied working voltage of -0.2 and -0.5 V (vs Ag/AgCl) under bioanodic and biocathodic conditions, respectively. Compared with the polarity reversal once only process, the PPR process (i.e., polarity period reversal in the absence of nano-Fe3O4) enhanced bioelectroactivity through increasing biofilm biomass and altering microbial community structure. Nano-Fe3O4 could enhance extracellular electron transfer as a result of promoting the formation of extracellular polymers containing Fe3O4 and reducing charge transfer resistance of bioelectrodes. This work develops a novel biocathode denitrification strategy to achieve efficient nitrate removal after rapid cultivation.

Enhancing microbial salt tolerance through low-voltage stimulation for improved p-chloronitrobenzene (p-CNB) removal in high-salinity wastewater

As an important raw material for the synthesis of chemical and pharmaceutical, hazardous carcinogen p-chloronitrobenzene (p-CNB) has been widely found in high-salinity wastewater which need to be treated carefully. Due to the high-salinity shock on microorganisms, conventional microbial treatment technologies usually show poor effluent quality. This study initially investigated the p-CNB removal performance of microorganisms stimulated by 1.2 V low-voltage in high-salinity wastewater under facultative anaerobic conditions and further revealed the enhanced mechanisms. The results showed that the p-CNB removal kinetic parameter kp-CNB in the electrostimulating microorganism reactor (EMR) increased by 104.37 % to 155.30 % compared to the microorganism reactor (MR) as the control group under the varying salinities (0-45 g/L NaCl). The secretion of extracellular polymeric substances (EPS) in halotolerant microorganisms mainly enhanced by 1.2 V voltage stimulation ranging from 0 g/L NaCl to 30 g/L NaCl. Protein concentration ratio of EMR to MR in loosely bound EPS achieved maximum value of 1.77 at the salinity of 15 g/L NaCl, and the same ratio in tightly bound EPS also peaked at 1.39 under the salinity of 30 g/L NaCl. At the salinity of 45 g/L NaCl, 1.2 V voltage stimulation mainly enhanced salt-in strategy of halotolerant microorganisms, and the intracellular Na+ and K+ concentration ratio of EMR to MR reached maximum and minimum values of 0.65 and 1.92, respectively. Furthermore, the results of microbial metagenomic and metatranscriptomic analysis showed the halotolerant microorganisms Pseudomonas_A and Nitratireductor with p-CNB removal ability were enriched significantly under 1.2 V voltage stimulation. And the gene expression of p-CNB removal, salt-in strategy and betaine transporter were enhanced under voltage stimulation at varying salinities. Our investigation provided a new solution which combined with 1.2 V voltage stimulation and halotolerant microorganisms for the treatment of high-salinity wastewater.

Recent advances in enrichment, isolation, and bio-electrochemical activity evaluation of exoelectrogenic microorganisms

Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only ~100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.

Ensemble machine learning approach for examining critical process parameters and scale-up opportunities of microbial electrochemical systems for hydrogen peroxide production

Hydrogen peroxide (H₂O₂) production in microbial electrochemical systems (MESs) is an attractive option for enabling a circular economy in the water/wastewater sector. Here, a machine learning algorithm was developed, using a meta-learning approach, to predict the H₂O₂ production rates in MES based on the seven input variables, including various design and operating parameters. The developed models were trained and cross-validated using the experimental data collected from 25 published reports. The final ensemble meta-learner model (combining 60 models) demonstrated a high prediction accuracy with very high R² (0.983) and low root-mean-square error (RMSE) (0.647 kg H₂O₂ m^-3 d^-1) values. The model identified the carbon felt anode, GDE cathode, and cathode-to-anode volume ratio as the top three most important input features. Further scale-up analysis for small-scale wastewater treatment plants indicated that proper design and operating conditions could increase the H₂O₂ production rate to as high as 9 kg m^-3 d^-1.

"Self-degradation" of 2-chlorophenol in a sequential cathode-anode cascade mode bioelectrochemical system

A sequential cathode-anode cascade mode bioelectrochemical system (BES) was designed and developed to achieve the "self-degradation" of 2-chlorophenol (2-CP). With the cooperation of cathode and anode, the electrons supplied for the cathode 2-CP dechlorination come from its own dechlorinated product in the anode, phenol. Separate degradation experiments of cathode 2-CP and anode phenol were firstly conducted. The optimum concentration ratio of anode acetate to phenolic compound (3.66/1.56) and the phenolic compound degradation ability of BES were investigated. With the formation of the bioanode able to degrade phenol, the sequential cathode-anode cascade mode BES was further developed, where 2-CP could achieve sequential dechlorination and ring-cleavage degradation. When applied voltage was 0.6 V and cathode influent pH was 7, 1.56 mM 2-CP reached 80.15% cathode dechlorination efficiency and 58.91% total cathode-anode phenolic compounds degradation efficiency. The bioanodes played a decisive role in BES. Different operating conditions would affect the overall performance of BES by changing the electrochemical activity and microbial community structure of the bioanodes. This study demonstrated the feasibility of the sequential cathode-anode cascade mode BES to degrade 2-CP wastewater and provided perspectives for the cooperation of cathode and anode, aiming to explore more potential of BES in wastewater treatment field.

Biostimulation of sulfate-reducing bacteria used for treatment of hydrometallurgical waste by secondary metabolites of urea decomposition by Ochrobactrum sp. POC9: From genome to microbiome analysis

Sulfate-reducing bacteria (SRB) are key players in many passive and active systems dedicated to the treatment of hydrometallurgical leachates. One of the main factors reducing the efficiency and activity of SRB is the low pH and poor nutrients in leachates. We propose an innovative solution utilizing biogenic ammonia (B-NH₃), produced by urea degrading bacteria, as a pretreatment agent for increasing the pH of the leachate and spontaneously stimulating SRB activity via bacterial secondary metabolites. The selected strain, Ochrobactrum sp. POC9, generated 984.7 mg/L of ammonia in 24 h and promotes an effective neutralization of B-NH₃. The inferred metabolic traits indicated that the Ochrobactrum sp. POC9 can synthesize a group of vitamins B, and the production of various organic metabolites was confirmed by GC-MS analysis. These metabolites comprise alcohols, organic acids, and unsaturated hydrocarbons that may stimulate biological sulfate reduction. With the pretreatment of B-NH₃, sulfate removal efficiency reached ~92.3% after 14 days of incubation, whereas SRB cell count and abundance were boosted (~10⁷ cell counts and 88 OTUs of SRB) compared to synthetic ammonia (S-NH₃) (~10³ cell counts and 40 OTUs of SRB). The dominant SRB is Desulfovibrio in both S-NH₃ and B-NH₃ pretreated leachate, however, it belonged to two different clades. By reconstructing the ecological network, we found that B-NH₃ not only directly increases SRB performance but also promotes other strains with positive correlations with SRB.

Fouling behaviors are different at various negative potentials in electrochemical anaerobic membrane bioreactors with conductive ceramic membranes

Membrane fouling remains a critical challenge to the practical application of anaerobic membrane bioreactor (AnMBR). To address this challenge, a conductive ceramic membrane was prepared for fouling control in AnMBR. By using the conductive membranes, the anti-fouling performances were enhanced about 3 times at potentials below -1.0 V vs Ag/AgCl compared to the conventional AnMBR. The particle size distributions and the electric field calculations suggest that such an enhancement was mainly attributed to the increased particle sizes of foulants in the supernatant and the electric field forces. Moreover, the scanning electron microscope and confocal laser scanning microscope results show that the conductive membrane at -1.0 V could increase the porosity of the gel layer on the surface, whereas the conductive membrane at -2.0 V could inhibit the activity of adhering bacteria. Surprisingly, membrane fouling of electrically-assisted AnMBR (AnEMBR) at -0.5 V was increased, which was attributed to a dense biofilm-like structure formation. Such a result is contrary to the conventional cognition that negative potential could mitigate the membrane fouling. Overall, this work supplements the understanding of the anti-fouling effects of the electric field in AnEMBR, and provides supplementary information for the engineering application of AnEMBR.

Large-scale switchable potentiostatically controlled/microbial fuel cell bioelectrochemical wastewater treatment system

The treatment of municipal wastewater is an energy-intensive process, with the delivery of oxygen as an electron acceptor accounting for a significant share of the total energy consumption. Microbial communities growing on polarized electrodes can facilitate wastewater treatment processes by exchanging electrons with the electrodes. As a new approach, we combined the use of polarized electrodes with microbial fuel cells (MFCs) to develop a switchable dual-mode bioelectrochemical wastewater treatment system. In this system, we first enriched microbial communities on polarized anodes and cathodes. After enrichment, the system was switched to either a self-powered MFC (SP-MFC) mode or a potentiostatically controlled (PC) mode. The system was evaluated at the laboratory scale (260 L, 4 anode and cathode pairs) and the pilot scale (1200 L, 16 anode and cathode pairs). PC and SP-MFC systems showed improved COD removal relative to control (41.6 ± 3.5 and 38.4 ± 3.1 vs 28.8 ± 2.1 mg L^-1 d^-1, respectively). The laboratory-scale system was operated without biological or electrical interruption for one year. Finally, specific enrichment of active microbial communities was observed on PC anodes in comparison to mixed-operation and non-polarized control anodes. The combined PC and SP-MFC systems allowed us to develop a sustainable and failure-free bioelectrochemical wastewater treatment system.

Microbial electrochemical systems for hydrogen peroxide synthesis: Critical review of process optimization, prospective environmental applications, and challenges

Hydrogen peroxide (H₂O₂) is an industrial chemical that has been widely adopted for various industrial applications, including water and wastewater treatment. Currently, the majority of H₂O₂ is being produced through the anthraquinone oxidation process, which is disadvantageous due to the requirement of toxic raw materials and high energy input. Recently, microbial electrochemical cells (MXCs), such as microbial fuel cells and microbial electrolysis cells, have demonstrated great potential for effective H₂O₂ production via cathodic oxygen-reduction reaction (ORR). Previous studies have specified key operational parameters for scaling-up of H₂O₂-producing MXCs, where improvements in production rate, conversion efficiency, product concentration and stability are attainable. Moreover, various systems have demonstrated their value proposition in the contaminant removal aspects through direct removal of various environmental pollutants, water disinfection, and many more. This review is intended to highlight promising ways of H₂O₂ production with MXCs and on-site environmental applications of bioelectrochemically-produced H₂O₂.

Shift of biofilm and suspended bacterial communities with changes in anode potential in a microbial electrolysis cell treating primary sludge

This study, for the first time, documented microbial community shifts in response to the changes in anode potential in a microbial electrolysis cell (MEC) operated with primary sludge. At an anode potential of -0.4 V vs. Ag/AgCl, the MEC showed COD and VSS removal efficiencies of 73 ± 1% and 75 ± 2%, respectively. The volumetric current density and specific hydrogen production rate were 23 ± 1.2 A/m³, and 145 ± 4.1 L/m³-d, respectively. The anodic microbial community was consisted of various fermentative/hydrolytic bacteria (e.g., Bacteroides and Dysgonomonas) and anode-respiring bacteria (Geobacter), while different hydrolytic/fermentative bacteria were abundant in suspension. The MEC showed substantially inferior performance along with a higher accumulation of various volatile fatty acids when the anode potential was switched to more positive values (0 V and +0.4 V). Both biofilms and suspended communities were also shifted when the anode potential was changed. Notably, at +0.4 V, Geobacter genus entirely disappeared from the biofilms, while Paludibacter species (known fermentative bacteria) were selectively enriched in biofilms. Also, the relative abundance of genus Bacteroides (known hydrolytic bacteria) substantially decreased in both biofilms and suspension, which was correlated with the inferior hydrolysis of VSS. Quantitative comparison of biofilms and suspended microbial communities at different anode potentials revealed a sharp decrease in bacterial cell numbers in anode biofilms after changing anode potential from -0.4 V to +0.4 V. By contrast, bacterial cell numbers in suspension were slightly decreased. Collectively, these results provide new insights into the role of anode potential in shaping key microbial players associated with hydrolysis/fermentation and anodic respiration processes when MECs are operated with real biowastes.

Sustainable synthesis of novel carbon microwires for the modification of a Ti mesh anode in bioelectrochemical systems

Herein, an effective method was developed to integrate carbon microwires on Ti mesh (denoted as CM/TiM) to fabricate high-performance anodes with long-time stability in microbial fuel cell. CM/TiM was synthesized by colonizing filamentous fungi on the bread modified Ti mesh followed by carbonization, which could convert the attached mycelium into carbon microwires (denoted as CM). Benefiting from the biocompatibility and 3D interlaced structure of carbon microwires, the biomass accumulation (1027 ± 83 μg cm^-2) of CM/TiM have been significantly improved nearly 3 folds, thus the fabricated CM/TiM demonstrated 2-fold higher current density (12.19 ± 0.07 A m^-2) with significantly increased stability compared with TiM. Therefore, the present high power output, chemical stability and hydrophilic carbon microwires make CM/TiM stable, scalable and environmentally sustainable anodes in bioelectrochemical systems.

Less biomass and intracellular glutamate in anodic biofilms lead to efficient electricity generation by microbial fuel cells

BACKGROUND

Using a microbial fuel cell (MFC), we observed that a complex microbial community decomposed starch and transferred electrons to a graphite felt anode to generate current. In spite of the same reactor configuration, inoculum, substrate, temperature, and pH, MFCs produced different current and power density. To understand which factor(s) affected electricity generation, here, we analyzed a complex microbial community in an anodic biofilm and fermentation broth using Illumina MiSeq sequencing and metabolomics.

RESULTS

Microbial biomass on the anode was lower in MFCs generating more electricity (0.09-0.16 mg cm^-2-anode) than in those generating less electricity (0.60-2.80 mg cm^-2-anode), while being equal (3890-4196 mg L^-1-broth) in the fermentation broth over the same operational period. Chemical oxygen demand removal and acetate concentration were also similar in fermentation broths. MFCs generating more electricity had relatively more exoelectrogenic bacteria, such as Geobacter sp., but fewer acetate-utilizing Methanosarcina sp. and/or Lactococcus sp. in anodic biofilms. Accordingly, anodic biofilms generating more electricity presented higher levels of most intracellular metabolites related to the tricarboxylic acid cycle and a higher intracellular ATP/ADP ratio, but a lower intracellular NADH/NAD⁺ ratio. Moreover, the level of intracellular glutamate, an essential metabolite for microbial anabolic reactions, correlated negatively with current density.

CONCLUSION

Microbial growth on the anode and intracellular glutamate levels negatively affect electricity generation by MFCs. Reduced formation of anodic biofilm, in which intracellular glutamate concentration is 33.9 μmol g-cell^-1 or less, favors the growth of acetate-utilizing Geobacter sp. on the anode and improves current generation.

Variation in electrode redox potential selects for different microorganisms under cathodic current flow from electrodes in marine sediments

Extracellular electron transport (EET) is a microbial process that allows microorganisms to transport electrons to and from insoluble substrates outside of the cell. Although progress has been made in understanding how microbes transfer electrons to insoluble substrates, the process of receiving electrons has largely remained unexplored. We investigated redox potentials favourable for donating electrons to dissolved and insoluble components in Catalina Harbor marine sediment by combining electrochemical techniques with geochemistry and molecular methods. Working electrodes buried in sediment microcosms were poised at seven redox potentials between -300 and -750 mV versus Ag/AgCl using a three-electrode system. In electrode biofilms recovered after 2-month incubations, overall community diversity increased with more negative redox potentials. Abundances of known EET-capable groups (e.g., Alteromonadales and Desulfuromonadales) varied with redox potential. Motility and chemotaxis genes were found in greater abundance in electrode communities, suggesting a possible selective advantage of these pathways for colonization and utilization of the electrode. Our enrichments demonstrated the validity of this approach in capturing groups known, as well as novel groups (e.g., Campylobacterales) that perform EET. The diverse nature of the enriched cathode communities suggest that insoluble substrate oxidation may be a critical, although poorly described microbial metabolic process in marine sediment.