Adhesion of Rhodococcus ruber IEGM 342 to polystyrene studied using contact and non-contact temperature measurement techniques

Assessment of biodegradation and toxicity of alternative plasticizer di(2-ethylhexyl) terephthalate: Impacts on microbial biofilms, metabolism, and reactive oxygen species-mediated stress response

Although di(2-ethylhexyl) terephthalate (DOTP) is being widely adopted as a non-phthalate plasticizer, existing research primarily focuses on human and rat toxicity. This leaves a significant gap in our understanding of their impact on microbial communities. This study assessed the biodegradation and toxicity of DOTP on microbes, focusing on its impact on biofilms and microbial metabolism using Rhodococcus ruber as a representative bacterial strain. DOTP is commonly found in mass fractions between 0.6 and 20% v/v in various soft plastic products. This study used polyvinyl chloride films (PVC) with varying DOTP concentrations (range 1-10% v/v) as a surface for analysis of biofilm growth. Cell viability and bacterial stress responses were tested using LIVE/DEAD™ BacLight™ Bacterial Viability Kit and by the detection of reactive oxygen species using CellROX™ Green Reagent, respectively. An increase in the volume of dead cells (in the plastisphere biofilm) was observed with increasing DOTP concentrations in experiments using PVC films, indicating the potential negative impact of DOTP on microbial communities. Even at a relatively low concentration of DOTP (1%), signs of stress in the microbes were noticed, while concentrations above 5% compromised their ability to survive. This research provides a new understanding of the environmental impacts of alternative plasticizers, prompting the need for additional research into their wider effects on both the environment and human health.

Adhesion of Rhodococcus bacteria to solid hydrocarbons and enhanced biodegradation of these compounds

Adhesive activities of hydrocarbon-oxidizing Rhodococcus bacteria towards solid hydrocarbons, effects of adhesion on biodegradation of these compounds by rhodococcal cells and adhesion mechanisms of Rhodococcus spp. were studied in this work. It was shown that efficiency of Rhodococcus cells' adhesion to solid n-alkanes and polycyclic aromatic hydrocarbons (PAHs) varied from 0.0 to 10.6·10⁶ CFU/cm². R. erythropolis IEGM 212 and R. opacus IEGM 262 demonstrated the highest (≥ 4.3·10⁶ CFU/cm²) adhesion. The percentage biodegradation of solid hydrocarbons (n-hexacosane and anthracene as model substrates) by Rhodococcus cells was 5 to 60% at a hydrocarbon concentration of 0.2% (w/w) after 9 days and strongly depended on cell adhesive activities towards these compounds (r ≥ 0.71, p < 0.05). No strict correlation between the adhesive activities of rhodococcal cells and physicochemical properties of bacteria and hydrocarbons was detected. Roughness of the cell surface was a definitive factor of Rhodococcus cell adhesion to solid hydrocarbons. Specific appendages with high adhesion force (≥ 0.6 nN) and elastic modulus (≥ 6 MPa) were found on the surface of Rhodococcus cells with high surface roughness. We hypothesized that these appendages participated in the adhesion process.

Enzyme-modulated photothermal immunoassay of chloramphenicol residues in milk and egg using a self-calibrated thermal imager

Highly sensitive and accurate detection of chloramphenicol is of paramount importance for food safety. Herein, an enzyme-modulated photothermal immunosensor that uses a self-calibrated thermal imaging system (SCTIS) as signal read-out was developed for detecting chloramphenicol. In this immunosensor, alkaline phosphatase was used as a modulator of the photothermal conversion. It could hydrolyze the substrate into ascorbic acid, thereby reducing oxidized 3,3',5,5'-tetramethylbenzidine, which exhibited a near-infrared laser-driven photothermal effect. For precise temperature measurement, the SCTIS was designed by using the temperature compensation of a ceramic chip to enable real-time self-calibration of the temperature. This SCTIS-based immunosensor could detect chloramphenicol with a LOD of 9 pg/mL in 2 h, and relative standard derivations from 3.95% to 13.58%. The average recoveries in milk and egg samples ranged from 76% to 114%. This versatile sensing strategy can detect various targets by altering recognition elements, thus has wide applicability in food safety testing and monitoring.

Organic and inorganic model soil fractions instigate the formation of distinct microbial biofilms for enhanced biodegradation of benzo[a]pyrene

This study conducted the sorption and biodegradation of benzo[a]pyrene (BaP) by microbial biofilm communities developed on proxies for materials typically found in soils. The half-life of BaP was 4.7 and 2.3 weeks for biofilms on the inorganic carrier (BC_INOR, montmorillonite) and on the organic carrier (BC_OR, humic acid), respectively. In contrast, the half-life was 7.0 weeks for specialized planktonic cultures (PK). The exposure to BaP caused the development of lipid inclusion bodies inside the bacteria of the PK systems and biofilms of the BC_INOR, but not on the biofilms of the BC_OR system. Interestingly, the BC_OR displayed not only the greatest BaP sorption capacity but also the greatest bacterial density and membrane integrity and the shortest bacteria-to-bacteria distances, which were consistent with the increased production of cell surface extracellular polymeric substances on the BC_OR. Both carriers caused a noticeable shift in the bacterial genera during the biodegradation of the BaP. The BC_INOR selected for Rhodococcus, Brucella, Chitinophaga, and Labrys, whereas the BC_OR favored Rhodococcus and Dokdonella. It indicated that ultra-structure and BaP degradation within the organic carrier-attached biofilms differed from the inorganic ones, and suggested that the microstructural heterogeneity and microbial biodiversity from biofilms on the organic carrier promoted biodegradation.

Hydrophobic and adhesive patterns of lactic acid bacteria and their antagonism against foodborne pathogens on tomato surface (Solanum lycopersicum L.)

AIMS

To evaluate tomato epiphyte lactic acid bacteria (LAB) hydrophobicity and auto-aggregation as an indicator of bacteria adhesion to tomato. Likewise, use LAB adhesion and co-aggregation as mechanisms to antagonize pathogen attachment.

METHODS AND RESULTS

Fifty-four LAB were screened to evaluate their hydrophobic, auto- and co-aggregative properties against Salmonella Typhimurium, Saintpaul, Montevideo and Escherichia coli O157:H7. Subsequently, tomato adhesion of Enterococcus faecium Col1-1C, Weisella cibaria 11-E-2 and W. confusa Col 1-13 with high, medium and low hydrophobicity and high co-aggregation was investigated as well as their pathogen antagonism. Results indicate that bacteria hydrophobicity and auto-aggregation correspond to LAB adhesion to tomato. Enterococcus faecium Col1-1C interfered in most of the pathogen adhesion and micrographs revealed that such effect could be related to the inhibition of structures-type biofilm on E. coli O157:H7 and the aggregate formation on Salmonella.

CONCLUSIONS

Lactic acid bacteria hydrophobicity and auto-aggregation can estimate bacteria adhesion to tomato and adhesive and co-aggregative properties could serve as a tool to antagonize foodborne pathogens under specific conditions.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study evidence the interference of Ent. faecium Col1-1C in E. coli O157:H7 biofilm formation and Salmonella colonization.

Advanced Rhodococcus Biocatalysts for Environmental Biotechnologies

The review is devoted to biocatalysts based on actinobacteria of the genus Rhodococcus, which are promising for environmental biotechnologies. In the review, biotechnological advantages of Rhodococcus bacteria are evaluated, approaches used to develop robust and efficient biocatalysts are discussed, and their relevant applications are given. We focus on Rhodococcus cell immobilization in detail (methods of immobilization, criteria for strains and carriers, and optimization of process parameters) as the most efficient approach for stabilizing biocatalysts. It is shown that advanced Rhodococcus biocatalysts with improved working characteristics, enhanced stress tolerance, high catalytic activities, human and environment friendly, and commercially viable are developed, which are suitable for wastewater treatment, bioremediation, and biofuel production.