Cloning, expression in Streptomyces lividans and biochemical characterization of a thermostable endo-beta-1,4-xylanase of Thermomonospora alba ULJB1 with cellulose-binding ability

Biosynthesis, molecular modeling and statistical optimization of xylanase from a mangrove associated actinobacterium Streptomyces variabilis (MAB3) using Box-Behnken design with its bioconversion efficacy

The present study was undertaken to evaluate the biosynthesis, molecular modeling and statistical optimization of xylanase production through Box-Behnken design by a mangrove associated actinobacterium Streptomyces variabilis (MAB3). Initially, the production of xylanase by the selected strain was carried through submerged fermentation using birchwood xylan as substrate. Further the xylanase production was statistically optimized through Box-Behnken design. It showed 5.30 fold increase of xylanase production by the isolate compared to 'one factor at a time approach' in the presence of the basal medium containing birchwood xylan (2.0% w/v) at pH 8.2, temperature 46.5 °C, inoculum size of 2% for 68 h. The analysis of variance (ANOVA) revealed high coefficient of determination (R² = 0.9490) for the respective responses at significant level (P < 0.0001). The xylanase was purified by different purification steps and it resulted 5.30 fold increase with the yield of 21.27% at the final step using sephadex G-75 chromatography. The molecular weight of the purified xylanase was observed as 50 kDa on 10% SDS-PAGE. The homology 3D structure of the purified xylanase protein was predicted and this protein encodes with 420 amino acid residues. The maximum activity of purified xylanase was observed at pH 8, temperature 40 °C and the production medium supplemented with 1 mM Ca²⁺ metal ion, 2.0% xylan and 1.5% NaCl. The kinetic parameters of the purified xylanase expressed the K_m and V_max values of 5.23 mg/ml and 152.07 μg/min/mg, respectively. Finally, the xylanolytic hydrolysis of pretreated agro-residues, especially the rice straw substituted medium yielded maximum (46.28 mg/g) level of reducing sugar and saccharification (63.18%), followed by bioethanol production (3.92 g/l) at 72 h of incubation. Based on the results, it could be confirmed that the selected isolate is a potent strain for xylanase production and also it can able to convert the pretreated agro-residues into economically important byproduct like bioethanol.

Production of chemicals and proteins using biomass-derived substrates from a Streptomyces host

Bioproduction using microbes from biomass feedstocks is of interest in regards to environmental problems and cost reduction. Streptomyces as an industrial microorganism plays an important role in the production of useful secondary metabolites for various applications. This strain also secretes a wide range of extracellular enzymes which degrade various biopolymers in nature, and it consumes these degrading substrates as nutrients. Hence, Streptomyces can be employed as a cell factory for the conversion of biomass-derived substrates into various products. This review focuses on the following two points: (1) Streptomyces as a producer of enzymes for degrading biomass-derived polysaccharides and polymers; and, (2) wild-type and engineered strains of Streptomyces as a host for chemical production from biomass-derived substrates.

C-Terminal proline-rich sequence broadens the optimal temperature and pH ranges of recombinant xylanase from Geobacillus thermodenitrificans C5

Efficient utilization of hemicellulose entails high catalytic capacity containing xylanases. In this study, proline rich sequence was fused together with a C-terminal of xylanase gene from Geobacillus thermodenitrificans C5 and designated as GthC5ProXyl. Both GthC5Xyl and GthC5ProXyl were expressed in Escherichia coli BL21 host in order to determine effect of this modification. The C-terminal oligopeptide had noteworthy effects and instantaneously extended the optimal temperature and pH ranges and progressed the specific activity of GthC5Xyl. Compared with GthC5Xyl, GthC5ProXyl revealed improved specific activity, a higher temperature (70°C versus 60°C) and pH (8 versus 6) optimum, with broad ranges of temperature and pH (60-80°C and 6.0-9.0 versus 40-60°C and 5.0-8.0, respectively). The modified enzyme retained more than 80% activity after incubating in xylan for 3h at 80°C as compared to wild -type with only 45% residual activity. Our study demonstrated that proper introduction of proline residues on C-terminal surface of xylanase family might be very effective in improvement of enzyme thermostability. Moreover, this study reveals an engineering strategy to improve the catalytic performance of enzymes.

Cloning, Expression and Biochemical Characterization of Endomannanases from Thermobifida Species Isolated from Different Niches

Thermobifidas are thermotolerant, compost inhabiting actinomycetes which have complex polysaccharide hydrolyzing enzyme systems. The best characterized enzymes of these hydrolases are cellulases from T. fusca, while other important enzymes especially hemicellulases are not deeply explored. To fill this gap we cloned and investigated endomannanases from those reference strains of the Thermobifida genus, which have published data on other hydrolases (T. fusca TM51, T. alba CECT3323, T. cellulosilytica TB100^T and T. halotolerans YIM90462^T). Our phylogenetic analyses of 16S rDNA and endomannanase sequences revealed that T. alba CECT3323 is miss-classified; it belongs to the T. fusca species. The cloned and investigated endomannanases belong to the family of glycosyl hydrolases 5 (GH5), their size is around 50 kDa and they are modular enzymes. Their catalytic domains are extended by a C-terminal carbohydrate binding module (CBM) of type 2 with a 23–25 residues long interdomain linker region consisting of Pro, Thr and Glu/Asp rich repetitive tetrapeptide motifs. Their polypeptide chains exhibit high homology, interdomain sequence, which don’t show homology to each other, but all of them are built up from 3–6 times repeated tetrapeptide motifs) (PTDP-Tc, TEEP-Tf, DPGT-Th). All of the heterologously expressed Man5A enzymes exhibited activity only on mannan. The pH optima of Man5A enzymes from T. halotolerans, T. cellulosilytica and T. fusca are slightly different (7.0, 7.5 and 8.0, respectively) while their temperature optima span within the range of 70–75°C. The three endomannanases exhibited very similar kinetic performances on LBG-mannan substrate: 0.9–1.7mM of K_M and 80–120 1/sec of turnover number. We detected great variability in heat stability at 70°C, which was influenced by the presence of Ca²⁺. The investigated endomannanases might be important subjects for studying the structure/function relation behind the heat stability and for industrial applications to hemicellulose degradation.

Characterization of a purified thermostable xylanase from Caldicoprobacter algeriensis sp. nov. strain TH7C1(T)

The present study investigates the purification and biochemical characterization of an extracellular thermostable xylanase (called XYN35) from Caldicoprobacter algeriensis sp. nov., strain TH7C1(T), a thermophilic, anaerobic strain isolated from the hydrothermal hot spring of Guelma (Algeria). The maximum xylanase activity recorded after 24 h of incubation at 70 °C and in an optimized medium containing 10 g/L mix birchwood- and oats spelt-xylan was 250 U/mL. The pure protein was obtained after heat treatment (1 h at 70 °C), followed by sequential column chromatographies on Sephacryl S-200 gel filtration and Mono-S Sepharose anion-exchange. Matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF/MS) analysis indicated that the purified enzyme is a monomer with a molecular mass of 35,075.10 Da. The results from amino-acid sequence analysis revealed high homology between the 21 NH2-terminal residues of XYN35 and those of bacterial xylanases. The enzyme showed optimum activity at pH 11 and 70 °C. While XYN35 was activated by Ca(2+), Mn(2+), and Mg(2+), it was completely inhibited by Hg(2+) and Cd(2+). The xylanase showed higher specific activity on soluble oat-spelt xylan, followed by beechwood xylan. This enzyme was also noted to obey the Michaelis-Menten kinetics, with Km and kcat values on oat-spelt xylan being 1.33 mg/mL and 400 min(-1), respectively. Thin-layer chromatography soluble oat-spelt xylan (TLC) analysis showed that the final hydrolyzed products of the enzyme from birchwood xylan were xylose, xylobiose, and xylotriose. Taken together, the results indicated that the XYN35 enzyme has a number of attractive biochemical properties that make it a potential promising candidate for future application in the pulp bleaching industry.

High phylogenetic diversity of glycosyl hydrolase family 10 and 11 xylanases in the sediment of Lake Dabusu in China

Soda lakes are one of the most stable naturally occurring alkaline and saline environments, which harbor abundant microorganisms with diverse functions. In this study, culture-independent molecular methods were used to explore the genetic diversity of glycoside hydrolase (GH) family 10 and GH11 xylanases in Lake Dabusu, a soda lake with a pH value of 10.2 and salinity of 10.1%. A total of 671 xylanase gene fragments were obtained, representing 78 distinct GH10 and 28 GH11 gene fragments respectively, with most of them having low homology with known sequences. Phylogenetic analysis revealed that the GH10 xylanase sequences mainly belonged to Bacteroidetes, Proteobacteria, Actinobacteria, Firmicutes and Verrucomicrobia, while the GH11 sequences mainly consisted of Actinobacteria, Firmicutes and Fungi. A full-length GH10 xylanase gene (xynAS10-66) was directly cloned and expressed in Escherichia coli, and the recombinant enzymes showed high activity at alkaline pH. These results suggest that xylanase gene diversity within Lake Dabusu is high and that most of the identified genes might be novel, indicating great potential for applications in industry and agriculture.

Thermostability improvement of a streptomyces xylanase by introducing proline and glutamic acid residues

Protein engineering is commonly used to improve the robustness of enzymes for activity and stability at high temperatures. In this study, we identified four residues expected to affect the thermostability of Streptomyces sp. strain S9 xylanase XynAS9 through multiple-sequence analysis (MSA) and molecular dynamic simulations (MDS). Site-directed mutagenesis was employed to construct five mutants by replacing these residues with proline or glutamic acid (V81P, G82E, V81P/G82E, D185P/S186E, and V81P/G82E/D185P/S186E), and the mutant and wild-type enzymes were expressed in Pichia pastoris. Compared to the wild-type XynAS9, all five mutant enzymes showed improved thermal properties. The activity and stability assays, including circular dichroism and differential scanning calorimetry, showed that the mutations at positions 81 and 82 increased the thermal performance more than the mutations at positions 185 and 186. The mutants with combined substitutions (V81P/G82E and V81P/G82E/D185P/S186E) showed the most pronounced shifts in temperature optima, about 17°C upward, and their half-lives for thermal inactivation at 70°C and melting temperatures were increased by >9 times and approximately 7.0°C, respectively. The mutation combination of V81P and G82E in adjacent positions more than doubled the effect of single mutations. Both mutation regions were at the end of long secondary-structure elements and probably rigidified the local structure. MDS indicated that a long loop region after positions 81 and 82 located at the end of the inner β-barrel was prone to unfold. The rigidified main chain and filling of a groove by the mutations on the bottom of the active site canyon may stabilize the mutants and thus improve their thermostability.

A novel xylanase with tolerance to ethanol, salt, protease, SDS, heat, and alkali from actinomycete Lechevalieria sp. HJ3

A xylanase-coding gene (xynAHJ3, 1,104 bp) was cloned from Lechevalieria sp. HJ3 harbored in a saline soil sampled from Heijing town, aka the “town of salt”, on the famous “Silk Route of the South”. The gene encodes a 367-residue polypeptide (XynAHJ3) with the highest identity of 74.0 % with the endoxylanase from Streptomyces thermocarboxydus HY-15. The coding sequence of the mature protein (without the predicted signal peptide from M1 to S22) of xynAHJ3 was expressed in Escherichia coli BL21 (DE3). The activity of the purified recombinant XynAHJ3 (rXynAHJ3) was apparently optimal at 70 °C and pH 6.0, retained greater than 55 % xylanase activity at a concentration of 0.2–2.0 M Na+ and 26 % at 4.0 M Na+ (pH 7.5 20 °C), and showed 110.2 and 44.2 % xylanase activities in the presence of 100 mM SDS (pH 6.0 37 °C) and 10 % ethanol (pH 5.0 37 °C), respectively. rXynAHJ3 activity was stable at 50 °C and pH 4.0–11.0 for more than 60 min, in trypsin or proteinase K at 20 °C for 24 h (pH 7.5), in 10 % ethanol (v/v) (pH 5.0) at 30 or 37 °C for 72 h, in 80 % ethanol (v/v) for 1 h, and in 0.6 or 3 M NaCl (20 °C, pH 7.5) for 72 h. Compared with the majority of xylanases with tolerance to ethanol, salt, SDS, or protease (K  m values of 1.42–15.1 mg ml−1), rXynAHJ3 showed a low K  m value (0.8 mg ml−1) and showed only limited amino acid sequence identity with those other xylanases (less than 47 %).

Functional association of catalytic and ancillary modules dictates enzymatic activity in glycoside hydrolase family 43 β-xylosidase

β-Xylosidases are hemicellulases that hydrolyze short xylo-oligosaccharides into xylose units, thus complementing endoxylanase degradation of the hemicellulose component of lignocellulosic substrates. Here, we describe the cloning, characterization, and kinetic analysis of a glycoside hydrolase family 43 β-xylosidase (Xyl43A) from the aerobic cellulolytic bacterium, Thermobifida fusca. Temperature and pH optima of 55-60 °C and 5.5-6, respectively, were determined. The apparent K(m) value was 0.55 mM, using p-nitrophenyl xylopyranoside as substrate, and the catalytic constant (k(cat)) was 6.72 s(-1). T. fusca Xyl43A contains a catalytic module at the N terminus and an ancillary module (termed herein as Module-A) of undefined function at the C terminus. We expressed the two recombinant modules independently in Escherichia coli and examined their remaining catalytic activity and binding properties. The separation of the two Xyl43A modules caused the complete loss of enzymatic activity, whereas potent binding to xylan was fully maintained in the catalytic module and partially in the ancillary Module-A. Nondenaturing gel electrophoresis revealed a specific noncovalent coupling of the two modules, thereby restoring enzymatic activity to 66.7% (relative to the wild-type enzyme). Module-A contributes a phenylalanine residue that functions as an essential part of the active site, and the two juxtaposed modules function as a single functional entity.

Purification and biochemical characterization of a highly thermostable xylanase from Actinomadura sp. strain Cpt20 isolated from poultry compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption-ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5-10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis-Menten kinetics, with the K (m) and k (cat) values being 1.55 mg soluble oat-spelt xylan/ml and 388 min(-1), respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn(2+), Ca(2+), and Cu(2+), it was, strongly inhibited by Hg(2+), Zn(2+), and Ba(2+). These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.

Assembly of xylanases into designer cellulosomes promotes efficient hydrolysis of the xylan component of a natural recalcitrant cellulosic substrate

In nature, the complex composition and structure of the plant cell wall pose a barrier to enzymatic degradation. Nevertheless, some anaerobic bacteria have evolved for this purpose an intriguing, highly efficient multienzyme complex, the cellulosome, which contains numerous cellulases and hemicellulases. The rod-like cellulose component of the plant cell wall is embedded in a colloidal blend of hemicelluloses, a major component of which is xylan. In order to enhance enzymatic degradation of the xylan component of a natural complex substrate (wheat straw) and to study the synergistic action among different xylanases, we have employed a variation of the designer cellulosome approach by fabricating a tetravalent complex that includes the three endoxylanases of Thermobifida fusca (Xyn10A, Xyn10B, and Xyn11A) and an Xyl43A β-xylosidase from the same bacterium. Here, we describe the conversion of Xyn10A and Xyl43A to the cellulosomal mode. The incorporation of the Xyl43A enzyme together with the three endoxylanases into a common designer cellulosome served to enhance the level of reducing sugars produced during wheat straw degradation. The enhanced synergistic action of the four xylanases reflected their immediate juxtaposition in the complex, and these tetravalent xylanolytic designer cellulosomes succeeded in degrading significant (~25%) levels of the total xylan component of the wheat straw substrate. The results suggest that the incorporation of xylanases into cellulosome complexes is advantageous for efficient decomposition of recalcitrant cellulosic substrates--a distinction previously reserved for cellulose-degrading enzymes.

IMPORTANCE

Xylanases are important enzymes for our society, due to their variety of industrial applications. Together with cellulases and other glycoside hydrolases, xylanases may also provide cost-effective conversion of plant-derived cellulosic biomass into soluble sugars en route to biofuels as an alternative to fossil fuels. Xylanases are commonly found in multienzyme cellulosome complexes, produced by anaerobic bacteria, which are considered to be among the most efficient systems for degradation of cellulosic biomass. Using a designer cellulosome approach, we have incorporated the entire xylanolytic system of the bacterium Thermobifida fusca into defined artificial cellulosome complexes. The combined action of these designer cellulosomes versus that of the wild-type free xylanase system was then compared. Our data demonstrated that xylanolytic designer cellulosomes displayed enhanced synergistic activities on a natural recalcitrant wheat straw substrate and could thus serve in the development of advanced systems for improved degradation of lignocellulosic material.

Thermostable enzymes as biocatalysts in the biofuel industry

Lignocellulose is the most abundant carbohydrate source in nature and represents an ideal renewable energy source. Thermostable enzymes that hydrolyze lignocellulose to its component sugars have significant advantages for improving the conversion rate of biomass over their mesophilic counterparts. We review here the recent literature on the development and use of thermostable enzymes for the depolymerization of lignocellulosic feedstocks for biofuel production. Furthermore, we discuss the protein structure, mechanisms of thermostability, and specific strategies that can be used to improve the thermal stability of lignocellulosic biocatalysts.

Gene cloning, expression and characterization of a new cold-active and salt-tolerant endo-beta-1,4-xylanase from marine Glaciecola mesophila KMM 241

Although a lot of xylanases are studied, only a few xylanases from marine microorganisms have been reported. A new xylanase gene, xynA, was cloned from marine bacterium Glaciecola mesophila KMM 241. Gene xynA contains 1,272 bp and encodes a 423-amino acid xylanase precursor. The recombinant xylanase, XynA, expressed in Escherichia coli BL21 is a monomer with a molecular mass of 43 kDa. Among the characterized xylanases, XynA shares the highest identity (46%) to the xylanase from Flavobacterium sp. strain MSY2. The optimum pH and temperature for XynA is 7.0 and 30 degrees C. XynA retains 23% activity and 27% catalytic efficiency at 4 degrees C. XynA has low thermostability, remaining 20% activity after 60-min incubation at 30 degrees C. Its apparent melting temperature (T (m)) is 44.5 degrees C. These results indicate that XynA is a cold-active xylanase. XynA shows a high level of salt-tolerance, with the highest activity at 0.5 M NaCl and retaining 90% activity in 2.5 M NaCl. It may be the first salt-tolerant xylanase reported. XynA is a strict endo-beta-1,4-xylanase with a demand of at least four sugar moieties for effective cleavage. It efficiently hydrolyzes xylo-oligosaccharides and xylan into xylobiose and xylotriose without producing xylose, suggesting its potential in xylo-oligosaccharides production.

Regulation and characterization of Thermobifida fusca carbohydrate-binding module proteins E7 and E8

E7, a single domain Family 33 cellulose binding module (CBM) protein, and E8, a non-catalytic, three-domain protein consisting of a Family 33 CBM, a FNIII domain, followed by a Family 2 CBM, were cloned, expressed, purified, and characterized. Western blots showed that E7 and E8 were induced and secreted when Thermobifida fusca was grown on cellobiose, Solka floc, switchgrass, or alfalfa as well as on beta-1,3 linked glucose molecules such as laminaribiose or pachyman. E8 bound well to alpha- and beta-chitin and bacterial microcrystalline cellulose (BMCC) at all pHs tested. E7 bound strongly to beta-chitin, less well to alpha-chitin and more weakly to BMCC than E8. Filter paper binding assays showed that E7 was 28% bound, E8 was 39% bound, a purified CBM2 binding domain from Cel6B was 88% bound, and only 5% of the Cel5A catalytic domain was bound. A C-terminal 6xHis tag influenced binding of both E7 and E8 to these substrates. Filter paper activity assays showed enhanced activity of T. fusca cellulases when E7 or E8 was present. This effect was observed at very low concentrations of cellulases or at very long times into the reaction and was mainly independent of the type of cellulase and the number of cellulases in the mixture. E8, and to a lesser extent E7, significantly enhanced the activity of Serratia marscescens Chitinase C on beta-chitin.

Genome sequence and analysis of the soil cellulolytic actinomycete Thermobifida fusca YX

Thermobifida fusca is a moderately thermophilic soil bacterium that belongs to Actinobacteria. It is a major degrader of plant cell walls and has been used as a model organism for the study of secreted, thermostable cellulases. The complete genome sequence showed that T. fusca has a single circular chromosome of 3,642,249 bp predicted to encode 3,117 proteins and 65 RNA species with a coding density of 85%. Genome analysis revealed the existence of 29 putative glycoside hydrolases in addition to the previously identified cellulases and xylanases. The glycosyl hydrolases include enzymes predicted to exhibit mainly dextran/starch- and xylan-degrading functions. T. fusca possesses two protein secretion systems: the sec general secretion system and the twin-arginine translocation system. Several of the secreted cellulases have sequence signatures indicating their secretion may be mediated by the twin-arginine translocation system. T. fusca has extensive transport systems for import of carbohydrates coupled to transcriptional regulators controlling the expression of the transporters and glycosylhydrolases. In addition to providing an overview of the physiology of a soil actinomycete, this study presents insights on the transcriptional regulation and secretion of cellulases which may facilitate the industrial exploitation of these systems.

Enzyme diversity of the cellulolytic system produced by Clostridium cellulolyticum explored by two-dimensional analysis: identification of seven genes encoding new dockerin-containing proteins

The enzyme diversity of the cellulolytic system produced by Clostridium cellulolyticum grown on crystalline cellulose as a sole carbon and energy source was explored by two-dimensional electrophoresis. The cellulolytic system of C. cellulolyticum is composed of at least 30 dockerin-containing proteins (designated cellulosomal proteins) and 30 noncellulosomal components. Most of the known cellulosomal proteins, including CipC, Cel48F, Cel8C, Cel9G, Cel9E, Man5K, Cel9M, and Cel5A, were identified by using two-dimensional Western blot analysis with specific antibodies, whereas Cel5N, Cel9J, and Cel44O were identified by using N-terminal sequencing. Unknown enzymes having carboxymethyl cellulase or xylanase activities were detected by zymogram analysis of two-dimensional gels. Some of these enzymes were identified by N-terminal sequencing as homologs of proteins listed in the NCBI database. Using Trap-Dock PCR and DNA walking, seven genes encoding new dockerin-containing proteins were cloned and sequenced. Some of these genes are clustered. Enzymes encoded by these genes belong to glycoside hydrolase families GH2, GH9, GH10, GH26, GH27, and GH59. Except for members of family GH9, which contains only cellulases, the new modular glycoside hydrolases discovered in this work could be involved in the degradation of different hemicellulosic substrates, such as xylan or galactomannan.

Stimulation of alkalothermophilic Aspergillus terreusxylanase by low-intensity laser radiation

In this study, Aspergillus terreus was irradiated by a 7.3 mW He-Ne laser in the presence of crystal violet, toluidine blue O and hematoporphyrin as photosensitizers. Xylanases recovered from non-irradiated and irradiated fungi were purified and characterized. The maximum production of xylanase (42.2 U/ml) was obtained after 5 min of laser irradiation in the absence of the photosensitizer. The irradiation of the sensitized fungus diminished the production of xylanase. On purification using G-100, the specific activity of xylanase recovered from the irradiated fungus was 292 U/mg protein representing a 37-fold purification over the crude extract compared with 95.6 U/mg protein representing the 12.8-fold for the enzyme recovered from the non-irradiated fungus. The enzyme recovered from the irradiated fungus had lower molecular weight as compared with that recovered from the non-irradiated one. Characterization of the purified enzymes revealed that the enzyme recovered from the irradiated fungus was more thermostable and had a wider range of optimum reaction temperature (60-70 degrees C) and pH (4.0-12.0), compared to the non-irradiated one.

Purification and properties of a family-10 xylanase from Aureobasidium pullulans ATCC 20524 and characterization of the encoding gene

An extracellular endo-1,4-beta-xylanase was purified from the culture supernatant of the ascomycete Aureobasidium pullulans ATCC 20524 grown on xylan. The purified enzyme was homogeneous as judged by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and isoelectric focusing, which showed an apparent M (r) of 39 kDa and a pI of 8.9, respectively. Xylanase activity was optimal at pH 6.0 and 70 degrees C. The genomic DNA and cDNAs encoding this protein were cloned and sequenced. The xylanase gene (xynII) encoded a 26 amino acid signal peptide and a 335 amino acid mature protein. DNA regions encoding the signal sequence and the mature protein were interrupted by introns of 56 and 73 bp, respectively. The xynII 5'-noncoding region had two consensus binding sites (5'-GCCARG-3') for the transcription factor PacC mediating pH regulation. Quantitative real-time polymerase chain reaction analysis revealed that the transcription levels at pH 6.0 and 8.0 were 8-fold and 22-fold higher than that at pH 2.7, respectively. A cloned xynII cDNA was expressed and secreted in the yeast Pichia pastoris. Sequence alignment and phylogenetic analysis suggested that the XynII belongs to glycosyl hydrolase family 10 and that it is evolutionarily distant from two clusters formed by other family-10 xylanases.

Purification and characterization ofThermobifida fuscaxylanase 10B

Thermobifida fusca grows well on cellulose and xylan, and produces a number of cellulases and xylanases. The gene encoding a previously unstudied endoxylanase, xyl10B, was overexpressed in E. coli, and the protein was purified and characterized. Mature Xyl10B is a 43-kDa glycohydrolase with a short basic domain at the C-terminus. It has moderate thermostability, maintaining 50% of its activity after incubation for 16 h at 62 °C, and is most active between pH 5 and 8. Xyl10B is produced by growth of T. fusca on xylan or Solka Floc but not on pure cellulose. Mass spectroscopic analysis showed that Xyl10B produces xylobiose as the major product from birchwood and oat spelts xylan and that its hydrolysis products differ from those of T. fusca Xyl11A. Xyl10B hydrolyzes various p-nitrophenyl-sugars, including p-nitrophenyl α-D-arabinofuranoside, p-nitrophenyl-β-D-xylobioside, p-nitrophenyl-β-D-xyloside, and p-nitrophenyl-β-D-cellobioside. Xyl11A has higher activity on xylan substrates, but Xyl10B produced more reducing sugars from corn fiber than did Xyl11A.Key words: xylanase, enzyme purification, Thermobifida fusca, family 10 hydrolase.

Studies ofThermobifida fusca plant cell wall degrading enzymes

I have been studying the Thermobifida fusca cellulose degrading proteins for the past 25 years. In this period, we have purified and characterized the six extracellular cellulases and an intracellular beta- glucosidase used by T. fusca for cellulose degradation, cloned and sequenced the structural genes encoding these enzymes, and helped to determine the 3-dimensional structures of two of the cellulase catalytic domains. This research determined the mechanism of a novel class of cellulase, family 9 processive endoglucanases, and helped to show that there were two types of exocellulases, ones that attacked the non-reducing ends of cellulose and ones that attacked the reducing ends. It also led to the sequencing of the T. fusca genome by the DOE Joint Genome Institute. We have studied the mechanisms that regulate T. fusca cellulases and have shown that cellobiose is the inducer and that cellulase synthesis is repressed by any good carbon source. A regulatory protein (CelR) that functions in the induction control has been purified, characterized, and its structural gene cloned and expressed in E. coli. I have also carried out research on two rumen bacteria, Prevotella ruminicola and Fibrobacter succinogenes, in collaboration with Professor James Russell, helping to arrange for the genomes of these two organisms to be sequenced by TIGR, funded by a USDA grant to the North American Consortium for Genomics of Fibrolytic Ruminal Biology.

Cloning and heterologous expression of a beta-D-mannosidase (EC 3.2.1.25)-encoding gene from Thermobifida fusca TM51

Thermobifida fusca TM51, a thermophilic actinomycete isolated from composted horse manure, was found to produce a number of lignocellulose-degrading hydrolases, including endoglucanases, exoglucanases, endoxylanases, beta-xylosidases, endomannanases, and beta-mannosidases, when grown on cellulose or hemicellulose as carbon sources. beta-Mannosidases (EC 3.2.1.25), although contributing to the hydrolysis of hemicellulose fractions, such as galacto-mannans, constitute a lesser-known group of the lytic enzyme systems due to their low representation in the proteins secreted by hemicellulolytic microorganisms. An expression library of T. fusca, prepared in Streptomyces lividans TK24, was screened for beta-mannosidase activity to clone genes coding for mannosidases. One positive clone was identified, and a beta-mannosidase-encoding gene (manB) was isolated. Sequence analysis of the deduced amino acid sequence of the putative ManB protein revealed substantial similarity to known mannosidases in family 2 of the glycosyl hydrolase enzymes. The calculated molecular mass of the predicted protein was 94 kDa, with an estimated pI of 4.87. S. lividans was used as heterologous expression host for the putative beta-mannosidase gene of T. fusca. The purified gene product obtained from the culture filtrate of S. lividans was then subjected to more-detailed biochemical analysis. Temperature and pH optima of the recombinant enzyme were 53 degrees C and 7.17, respectively. Substrate specificity tests revealed that the enzyme exerts only beta-D-mannosidase activity. Its kinetic parameters, determined on para-nitrophenyl beta-D-mannopyranoside (pNP-betaM) substrate were as follows: K(m) = 180 micro M and V(max) = 5.96 micro mol min(-1) mg(-1); the inhibition constant for mannose was K(i) = 5.5 mM. Glucono-lacton had no effect on the enzyme activity. A moderate trans-glycosidase activity was also observed when the enzyme was incubated in the presence of pNP-alphaM and pNP-betaM; under these conditions mannosyl groups were transferred by the enzyme from pNP-betaM to pNP-alphaM resulting in the synthesis of small amounts (1 to 2%) of disaccharides.

Surface structures of new and lesser known species of thermobifida as revealed by scanning electron microscopy

Surface structures of representatives of the genus Thermobifida were examined by scanning electron microscopy. Spores formed at the tips of multibranched sporophores initially resembled short sausages; then, upon maturation, they gradually built up their typical ovoid shape. Characteristic differences were observed between T. cellulolytica strain TB108 and T. fusca strains TM51. The spores of TB108 were larger (0.8x 1.3 microm) than those of TM51 (0.6 x 1.1 microm) in consequence of the more thickened outer squamous layer. When Thermobifida strains were grown on cellulose as sole carbon source, the mycelium was found to coil around the cellulose crystals and multiple protuberances emerged, resulting in a scabrous appearance to the mycelial surface. The presence of these cellulosome-like structures yielded a 24.5% surface enlargement of the scabrous mycelium as compared with the smooth one. The cellulosome emergence pattern paralleled the proportional increase in free endoglucanase activity measured during the culturing of these actinomycetes in the presence of cellulose.

Conformation and polarity of the active site of xylanase I fromThermomonosporasp. as deduced by fluorescent chemoaffinity labeling

A fluorescent chemoaffinity label o-phthalaldehyde (OPTA) was used to ascertain the conformational flexibility and polarity at the active site of xylanase I (Xyl I). The kinetics of inactivation of Xyl I with OPTA revealed that complete inactivation occurred due to the binding of one molecule of OPTA to the active site of Xyl I. The formation of a single fluorescent isoindole derivative corroborated these findings. OPTA has been known to form a fluorescent isoindole derivative by crosslinking the proximal thiol and amino groups of cysteine and lysine. The involvement of cysteine in the formation of a Xyl I-isoindole derivative has been negated by fluorometric and chemical modification studies on Xyl I with group-specific reagents and by amino-acid analysis. The kinetic analysis of diethylpyrocarbonate-modified Xyl I established the presence of an essential histidine at or near the catalytic site of Xyl I. Modification of histidine and lysine residues by diethylpyrocarbonate and 2,4,6-trinitrobenzenesulfonic acid, respectively, abolished the ability of the enzyme to form an isoindole derivative with OPTA, indicating that histidine and lysine participate in the formation of the isoindole complex. A mechanism for the reaction of OPTA with histidine and lysine residues present in the protein structure has been proposed. Experimental evidence presented here suggests for the first time that the active site of Xyl I is conformationally more flexible and more easily perturbed in the presence of denaturants than the molecule as a whole. The changes in the fluorescence emission maxima of a model compound (isoindole adduct) in solvents of different polarity were compared with the fluorescence behaviour of the Xyl I-isoindole derivative, leading to the conclusion that the active site is located in a microenvironment of low polarity.

Substrate analysis and molecular cloning of the extracellular alkaline phosphatase of Streptomyces griseus

Streptomyces species secrete large amounts of alkaline phosphatase (AP) enzymes that have not been characterized so far. An AP has been purified to homogeneity from cultures of Streptomyces griseus IMRU 3570. The enzyme has a monomer size of 62 kDa and is processed in the culture to a 33 kDa protein as shown by immunoblotting. The enzyme was purified by ammonium sulfate precipitation, CM-Sephadex cationic exchange, chromatofocusing and HPLC Sphaerogel 3000SW filtration. The pure enzyme uses a variety of organic phosphorylated compounds as substrates. The N-terminal end of the mature protein was found to be RLREDPFTLGVASGDPHP. The gene phoA has been cloned using as probe an oligomer based on the N-terminal sequence of the S. griseus AP. phoA encodes a protein of 62678 Da with low homology to the AP of Escherichia coli. The phoA gene was found to be homologous to three alkaline-phosphatase-encoding genes previously identified in the Streptomyces coelicolor genome. On the basis of the optimal pH, substrate specificity and differences in amino acid sequence of motifs defining the active centre of APs, the S. griseus AP uses a wide range of organic phosphate substrates and is different from the phosphatases of Gram-negative bacteria.

Capacity of thermomonospora alba XylA to impart thermostability in family F/10 chimeric xylanases

To reveal structure-function relationships of family F/10 glycanases, an in vitro molecular level shuffling experiment was conducted to accumulate useful amino acid residues from two homologous F/10 xylanases, FXYN of Streptomyces olivaceoviridis E-86 and XylA of Thermomonospora alba ULJB1, into a single chimeric xylanase. The parent genes were shuffled by crossovers at selected module borders using self-priming Polymerase Chain Reaction (PCR)s. The shuffled constructs, designated as FXYN-M3/4-XylA, FXYN-M9/10-XylA, and FXYN-M14/15-XylA were cloned and their nucleotide sequences were confirmed. Two chimera, FXYN-M3/4-XylA and FXYN-M14/15-XylA, demonstrated activity against RBB-xylan and were over-expressed as His-tag fusion proteins under control of T5 promoter of pQE60. The homogeneously pure chimeric proteins, FXYN-M3/4-XylA and FXYN-M14/15-XylA showed improved thermal and pH profiles compared to those of one of the parents, FXYN. This was apparently due to the influence of amino acids inherited from thermophilic XylA. Measured K(m) and kcat values were closer to those of the other parent, XylA. Interestingly, a significant level of heat tolerance up to 60 degrees C, was recorded for FXYN-M3/4-XylA in comparison to only 40 degrees C for FXYN-M14/15-XylA though their temperature optima did not correlates with their thermal stability. These results indicated that the amino acid residues of the larger T. alba XylA DNA fragment present in FXYN-M3/4-XylA were responsible for inducing its thermal stability.

Characterization and cloning of celR, a transcriptional regulator of cellulase genes from Thermomonospora fusca

CelR, a protein that regulates transcription of cellulase genes in Thermomonospora fusca (Actinomycetaceae) was purified to homogeneity. A 6-kilobase NotI-SacI fragment of T. fusca DNA containing the celR gene was cloned into Esherichia coli and sequenced. The celR gene encodes a 340-residue polypeptide that is highly homologous to members of the GalR-LacI family of bacterial transcriptional regulators. CelR specifically binds to a 14-base pair inverted repeat, which has sequence similarity to the binding sites of other family members. This site is present in regions upstream of all six cellulase genes in T. fusca. The binding of CelR to the celE promoter is inhibited specifically by low concentrations of cellobiose (0.2-0.5 mM), the major end product of cellulases. The other sugars tested did not affect binding at equivalent or 50-fold higher concentrations. The results suggest that CelR may act as a repressor, and that the mechanism of induction involves a direct interaction of CelR with cellobiose.

Purification and properties of a xylan-binding endoxylanase from Alkaliphilic bacillus sp. strain K-1

An alkaliphilic bacterium, Bacillus sp. strain K-1, produces extracellular xylanolytic enzymes such as xylanases, beta-xylosidase, arabinofuranosidase, and acetyl esterase when grown in xylan medium. One of the extracellular xylanases that is stable in an alkaline state was purified to homogeneity by affinity adsorption-desorption on insoluble xylan. The enzyme bound to insoluble xylan but not to crystalline cellulose. The molecular mass of the purified xylan-binding xylanase was estimated to be approximately 23 kDa. The enzyme was stable at alkaline pHs up to 12. The optimum temperature and optimum pH of the enzyme activity were 60 degrees C and 5.5, respectively. Metal ions such as Fe2+, Ca2+, and Mg2+ greatly increased the xylanase activity, whereas Mn2+ strongly inhibited it. We also demonstrated that the enzyme could hydrolyze the raw lignocellulosic substances effectively. The enzymatic products of xylan hydrolysis were a series of short-chain xylooligosaccharides, indicating that the enzyme was an endoxylanase.

Regulation of biosynthesis of individual cellulases in Thermomonospora fusca

Regulation of the biosynthesis of the six cellulases comprising the cellulolytic system of the thermophilic soil bacterium Thermomonospora fusca ER1 was studied. The levels of the individual enzymes produced on different noninducing and inducing carbon sources were determined. The lowest level of cellulase synthesis (3 nM) was observed with xylose as a carbon source, and the highest level (247 to 1,670 nM for different enzymes) was found in cultures grown on microcrystalline cellulose. Endocellulases and exocellulases showed distinctly different regulation patterns. Differences in the regulation of individual enzymes appear to be determined by the specific structural organization of the upstream regulatory sequences of their genes.