Efficacy of single-source rapid kV-switching dual-energy CT for characterization of non-uric acid renal stones: a prospective ex vivo study using anthropomorphic phantom

Diagnostic performance and feasibility of dual-layer detector dual-energy CT for characterization of urinary stones in patients of different sizes

BACKGROUND

Urinary stones are frequently encountered in urology and are typically identified using non-contrast CT scans. Dual-energy CT (DECT) is a valuable imaging technique that produces material-specific images and allows for precise assessment of stone composition by estimating the effective atomic number (Zeff), a capability not achievable with the conventional single-energy CT's attenuation measurement method.

PURPOSE

To investigate the diagnostic performance and image quality of dual-layer detector DECT (dlDECT) in characterizing urinary stones in patients of different sizes.

METHODS

All consecutive dlDECT examinations with stone protocol and presence of urinary stones between July 2018 and November 2019 were retrospectively evaluated. Two radiologists independently reviewed 120 kVp and color-overlay Zeff images to determine stone composition (reference standard = crystallography) and image quality. The objective analysis included image noise and Zeff values measurement.

RESULTS

A total of 739 urinary stones (median size 3.7 mm, range 1-35 mm) were identified on 177 CT examinations from 155 adults (mean age, 57 ± 15 years, 80 men, median weight 82.6 kg, range 42.6-186.9 kg). Using color-overlay Zeff images, the radiologists could subjectively interpret the composition in all stones ≥ 3 mm (n = 491). For stones with available reference standards (n = 74), dlDECT yielded a sensitivity of 80% (95%CI 44-98%) and a specificity of 98% (95%CI 92-100%) in visually discriminating uric acid from non-uric acid stones. Patients weighing > 90 kg and ≤ 90 kg had similar stone characterizability (p = 0.20), with 86% of stones characterized in the > 90 kg group and 87% in the ≤ 90 kg group. All examinations throughout various patients' weights revealed acceptable image quality. A Zeff cutoff of 7.66 accurately distinguished uric acid from non-uric acid stones (AUC = 1.00). Zeff analysis revealed AUCs of 0.78 and 0.91 for differentiating calcium-based stones from other non-uric stones and all stone types, respectively.

CONCLUSION

dlDECT allowed accurate differentiation of uric acid and non-uric acid stones among patients with different body sizes with acceptable image quality.

CLINICAL IMPACT

The ability to accurately differentiate uric acid stones from non-uric acid stones using color-overlay Zeff images allows for better tailored treatment strategies, helping to choose appropriate interventions and prevent potential complications related to urinary stones in patient care.

Utility of Quantitative Metrics from Dual-Layer Spectral-Detector CT for Differentiation of Pancreatic Neuroendocrine Tumor and Neuroendocrine Carcinoma

Background: The 2019 WHO classification separates neuroendocrine neoplasms (NENs) into neuroendocrine tumors (NET) and neuroendocrine carcinomas (NEC), which are considered to represent pathologically distinct entities warranting different management approaches. Dual-layer spectral-detector CT (DLCT) may aid their differentiation through specific material decomposition. Objective: To assess the utility of quantitative metrics derived from DLCT for the differentiation of pancreatic NET and NEC. Methods: This retrospective study included 104 patients (mean age 51±13 years; 53 women, 51 men) with pathologically confirmed NEN [89 NET, including 22 grade 1, 48 grade 2, and 19 grade 3 (G3); 15 NEC], who underwent multiphase DLCT within 15 days before biopsy or resection. Two radiologists independently placed ROIs to record tumor attenuation, iodine concentration (IC), and effective atomic number (Zeff) across phases, and also assessed qualitative features (composition, homogeneity, margins, calcifications, main pancreatic duct dilation, vascular invasion, lymphadenopathy). Interreader agreement was assessed. Mean values between readers were obtained for quantitative measures; consensus was reached for qualitative features. NET and NEC were compared using multivariable regression analysis and ROC analysis. Results: Interobserver agreement, expressed as intraclass correlation coefficients, ranged from 0.879 to 0.992 for quantitative metrics, and, expressed as kappa coefficients, from 0.763 to 0.823 for qualitative features. In multivariable analysis of qualitative and quantitative features, significant independent predictors of NEC (P<.05) were IC in portal venous phase (1.3 mg/mL in NEC vs 2.7 mg/mL in NET), Zeff in portal venous phase (8.1 vs 8.6), and attenuation in portal venous phase (78.2 vs 113.5 HU). AUC for predicting NEC was 0.897 for IC, 0.884 for Zeff, 0.921 for combination of IC and Zeff, and 0.855 for attenuation. Predicted probability based on combination of IC and Zeff achieved sensitivity of 93.3% and specificity of 80.9% for NEC. Significant independent predictors (P<.05) for differentiating G3 NET and NEC were IC (1.3 vs 2.0 mg/mL; AUC=0.789) and attenuation (78.2 vs 90.3 HU; AUC=0.647), both measured in portal venous phase. Conclusion: Incorporation of DLCT-metrics improves differentiation of NET and NEC compared with conventional CT attenuation and qualitative features. Clinical Impact: DLCT may help select patients with pancreatic NENs for platinum-based chemotherapies.

Accuracy and reproducibility of effective atomic number and electron density measurements from sequential dual energy CT

PURPOSE

This study assesses the accuracy of effective atomic number (Z_eff ) and electron density measurements acquired from dual energy CT and characterizes the response to clinically relevant variables representative of challenges in patient imaging, including: phantom size, material position within the phantom, variation over time, off-center positioning, and large cone beam angle.

METHODS

The Gammex Multi-Energy CT head and body phantoms were used to measure Z_eff and electron density from 35 rod inserts that mimic tissues and varying concentrations of iodine and calcium. Scans were performed on a Canon Aquilion ONE Genesis CT scanner over a period of 6 months using default dual energy protocols appropriate for each phantom size. Theoretical Z_eff and electron density values were calculated using data provided by the phantom manufacturer and compared to the measurements. Sources of variance were separated and quantified to identify the influences of random photon statistics, ROI placement, and variation over time. A subset of measurements were repeated with the phantom shifted in the vertical and horizontal directions, and over all slices in the volumetric scan.

RESULTS

All measurements showed strong correlation (r > 0.98) with their corresponding theoretical values; however, the system did demonstrate a bias of -0.58 atomic units in the body phantom and 0.28 atomic units in the head phantom for Z_eff measurements. The mean absolute percent error (MAPE) was 6.3% for the body phantom and 3.2% for the head phantom. Electron density measurements of the body and head phantoms gave MAPE values of 4.6% and 1.0%, respectively. Z_eff and electron density measurements significantly varied within the solid water background, showing a positional dependence within the phantom that dominated the total standard deviation in measurements. Z_eff values dropped by 0.2 atomic units when the phantom was off-center; electron density measurements were less affected by phantom position. Along the z-axis, the accuracy drops off markedly at more than 50-60 mm from the central slice.

CONCLUSION

The Canon dual energy system offers an accurate way of measuring the Z_eff and electron density of clinically relevant materials. Accuracy could be improved further by calibration to remove bias, careful attention to centering within the FOV, and avoiding measurements at the edges of the cone beam.

Single-energy CT predicts uric acid stones with accuracy comparable to dual-energy CT-prospective validation of a quantitative method

OBJECTIVES

To prospectively validate three quantitative single-energy CT (SE-CT) methods for classifying uric acid (UA) and non-uric acid (non-UA) stones.

METHODS

Between September 2018 and September 2019, 116 study participants were prospectively included in the study if they had at least one 3-20-mm urinary stone on an initial urinary tract SE-CT scan. An additional dual-energy CT (DE-CT) scan was performed, limited to the stone of interest. Additionally, to include a sufficient number of UA stones, eight participants with confirmed UA stone on DE-CT were retrospectively included. The SE-CT stone features used in the prediction models were (1) maximum attenuation (maxHU) and (2) the peak point Laplacian (ppLapl) calculated at the position in the stone with maxHU. Two prediction models were previously published methods (ppLapl-maxHU and maxHU) and the third was derived from the previous results based on the k-nearest neighbors (kNN) algorithm (kNN-ppLapl-maxHU). The three methods were evaluated on this new independent stone dataset. The reference standard was the CT vendor's DE-CT application for kidney stones.

RESULTS

Altogether 124 participants (59 ± 14 years, 91 men) with 106 non-UA and 37 UA stones were evaluated. For classification of UA and non-UA stones, the sensitivity, specificity, and accuracy were 100% (37/37), 97% (103/106), and 98% (140/143), respectively, for kNN-ppLapl-maxHU; 95% (35/37), 98% (104/106), and 97% (139/143) for ppLapl-maxHU; and 92% (34/37), 94% (100/106), and 94% (134/143) for maxHU.

CONCLUSION

A quantitative SE-CT method (kNN-ppLapl-maxHU) can classify UA stones with accuracy comparable to DE-CT.

KEY POINTS

• Single-energy CT is the first-line diagnostic tool for suspected renal colic. • A single-energy CT method based on the internal urinary stone attenuation distribution can classify urinary stones into uric acid and non-uric acid stones with high accuracy. • This immensely increases the availability of in vivo stone analysis.

Revolution spectral CT for urinary stone with a single/mixed composition in vivo: a large sample analysis

PURPOSE

To analyze various compositions of urinary stones using revolution spectral CT (rapid kV switching dual-energy CT) in vivo.

METHODS

202 patients with urinary stones underwent spectral CT before surgery. Zeff peak, overall scope and CT values were detected. Moreover, water/iodine attenuating material images were obtained. Removed stones were subjected to infrared spectroscopy after surgery. The results of infrared spectroscopy were compared with CT.

RESULTS

28 stones (14.08%) with single composition, 165 stones with two mixed compositions (81.68%), and 9 stones with three mixed compositions (4.46%) were observed. When Zeff peaks of stones with single/mixed compositions were summarized together, 146 peaks of calcium oxalate monohydrate, 119 peaks of calcium oxalate dihydrate, 55 peaks of carbapatite, 38 peaks of urate, 16 peaks of struvite, and 11 peaks of brushite were totally observed. 93.8% of calcium oxalate monohydrate had Zeff peaks between 13.3 and 14.0. 91.6% of calcium oxalate dihydrate had peaks between 12.0 and 13.3. For carbapatite, 90.9% of stones had peaks from 14.0 to 15.0. A total of 94.8% of urate had peaks between 7.0 and 11.0. 93.8% of struvite had peaks between 11.0 and 13.0, and 90.9% of brushite had peaks between 12.0 and 14.0. Moreover, densities of urate, struvite and brushite were low density in iodine-based images and high-density in water-based images.

CONCLUSION

The in-vivo analysis of spectral CT in urinary stone revealed characteristics of different compositions, especially mixed compositions. An in-vivo predictive model may be constructed to distinguish stone compositions.