Long-term results of the Wagner cone prosthesis

The Wagner Cone Stem for Atypical Femoral Anatomy in Total Hip Arthroplasty: A Report of 320 Cases with Minimum 5-Year Follow-up

BACKGROUND

The Wagner Cone Prosthesis was designed to address complex femoral deformities during total hip arthroplasty (THA), but its mid-term component survivorship and functional outcomes remain undetermined. The objectives of this study were to determine the implant survivorship, patient satisfaction, functional outcomes, osseointegration as seen radiographically, implant subsidence, and complications of THA using the Wagner Cone Prosthesis stem at intermediate-term follow-up.

METHODS

This study involved 302 patients with proximal femoral deformities, including developmental hip dysplasia and Legg-Calvé-Perthes disease, who underwent a total of 320 primary THAs using the Wagner Cone Prosthesis. The average age at the time of surgery was 49.4 ± 14.5 years (range, 18.8 to 85.6 years). Patient satisfaction was recorded using a self-administered questionnaire assessing satisfaction in 4 domains. The University of California at Los Angeles (UCLA) activity score, the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), the Oxford Hip Score (OHS), the Forgotten Joint Score (FJS), radiographic outcomes, and complications were recorded. The mean follow-up time was 10.1 years (range, 5.2 to 15.5 years).

RESULTS

Survivorship of the Wagner Cone Prosthesis was 98.7% (95% confidence interval [CI]: 97.2% to 100%) with stem revision as the end point and 95.8% (95% CI: 93.5% to 98.2%) with reoperation for any reason as the end point at 10 years postoperatively. In total, 3 stems were revised: 2 for infection and 1 for chronic hip dislocation. The median patient satisfaction score was 95 (interquartile range [IQR], 80 to 100), median UCLA score was 6 (IQR, 6 to 7), median WOMAC score was 18 (IQR, 16 to 22), median OHS was 40 (IQR, 36 to 47), and median FJS was 80 (IQR, 76 to 88) at the time of final follow-up. All Wagner Cone stems that were not revised showed radiographic evidence of osseointegration, with a mean stem subsidence of 0.9 ± 0.8 mm at the most recent follow-up.

CONCLUSIONS

The use of the Wagner Cone Prosthesis stem in patients with complex femoral anatomy undergoing primary THA is associated with excellent component survivorship, high levels of patient satisfaction, good functional outcomes, and reliable osseointegration with minimal stem subsidence as seen on radiographs at intermediate-term follow-up.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

The use of a standard-length conical tapered stem in hip revision arthroplasty to address Paprosky type I-II femoral defects: a prospective study of 87 patients

INTRODUCTION

Low-grade femoral defects in revision total hip arthroplasty (rTHA) might be preferably treated with a primary implant. Almost no previous study reported the use of standard-length conical tapered (SLCT) stems in these cases. We analyzed a series of cases using a SLCT stem in rTHA with Paprosky type I-II femoral defects. The purpose of the study was to determine clinical and radiographic outcomes in this series of rTHA.

MATERIALS AND METHODS

We prospectively followed 87 patients undergoing a femoral component rTHA: 53 Paprosky type I and 34 type II femoral defects. Patient-reported measures (Oxford Hip Score, EQ-5D, VAS pain during rest and activity) were administered at baseline, 1 and 2 years post-operatively. Radiographic subsidence overtime was scored. Kaplan-Meier curves were used to evaluate the subsidence over time, the complication-free survival, and the implant survivorship with reoperation and stem revision as endpoints.

RESULTS

The mean follow-up was 72.5 (SD ± 23.9) months. All PROMs significatively improved over time. The average subsidence was 2.8 (SD ± 3.2), 3.6 (SD ± 4.4), and 4.0 (SD ± 4.9) mm at 4, 12, and 24 months respectively. 6 stems had subsidence > 10 mm. The survival without complication was 0.85 (95% CI 0.94-0.77), while the implant survival without reoperation was 0.83 (95% CI 0.95-0.72). The overall stem survival rate was 93.7% (95% CI 0.91-0.97) at 2 years.

CONCLUSION

The use of a SLCT stem in rTHA with Paprosky type I-II femoral defects demonstrated good survival with low subsidence rates during the first 2 years after surgery. Surgeons should consider the use of this primary prosthesis as a potential treatment during stem revision in cases with limited femoral bone loss.

Weight-shifting-based robot control system improves the weight-bearing rate and balance ability of the static standing position in hip osteoarthritis patients: a randomized controlled trial focusing on outcomes after total hip arthroplasty

Background

After a total hip arthroplasty (THA), standing and walking balance are greatly affected in the early stages of recovery, so it is important to increase the weight-bearing amount (WBA) on the operated side. Sometimes, traditional treatments may not be enough to improve WBA and weight-bearing ratio (WBR) on the operated side in a satisfactory way. To solve this problem, we came up with a new weight-shifting-based robot control system called LOCOBOT. This system can control a spherical robot on a floor by changing the center of pressure (COP) on a force-sensing board in rehabilitation after THA. The goal of this study was to find out how rehabilitation with the LOCOBOT affects the WBR and balance in a static standing position in patients with unilateral hip osteoarthritis (OA) who had a primary uncemented THA.

Methods

This randomized controlled trial included 20 patients diagnosed with Kellgren-Lawrence (K-L) grade 3 or 4 hip OA on the operative side and K-L grade 0 normal hip on the nonoperative side. We used the minimization method for allocation and randomly assigned patients to either the LOCOBOT group or the control group. As a result, 10 patient seach were randomly assigned to the LOCOBOT and control groups. Both groups received 40 min of rehabilitation treatment. Out of the 40 min, the LOCOBOT group underwent treatment for 10 min with LOCOBOT. The control group performed COP-controlled exercises on a flat floor instead of using LOCOBOT for 10 of the 40 min. All theoutcome measures were performed pre-THA and 11.9 ± 1.6 days after THA (12 days after THA). The primary outcome measure included WBR in the static standing position.

Results

After12 days of THA, the LOCOBOT group exhibited significantly higher mean WBR and WBA (operated side) values than the control group. Furthermore, the LOCOBOT group exhibited significantly lower mean WBA (non-operated side) and outer diameter area (ODA) values than the control group. From pre-THA to 12 days after THA, the LOCOBOT group exhibited a significant improvement in mean WBR and WBA (operated side). Moreover, the mean WBA (non-operated side) and ODA significantly decreased. From pre-THA to 12 days after THA, the control group showed a significant increase in total trajectory length and ODA.

Conclusions

The most important finding of this study was that patients were able to perform the LOCOBOT exercise as early as the second day after THA, and that WBR and ODA significantly improved by the 12th day after THA. This result demonstrated that the LOCOBOT effectively improves WBR in a short period of time after THA and is a valuable system for enhancing balance ability. This expedites the acquisition of independence in activities of daily living after THA and may contribute to optimizing the effectiveness of medical care.

Midterm results of titanium conical Wagner stem with challenging femoral anatomy: Survivorship and unique bone remodeling

BACKGROUND

Complex anatomy of the proximal femur makes total hip arthroplasty (THA) more challenging. Short, straight, fluted and conical titanium stem like the Wagner Cone can be helpful to address small femoral canal, increased femoral neck version, important leg length discrepancy or proximal femoral deformity. The outcome in these patients is less assured and associated with high rate of complications. Therefore, we did a retrospective study aiming to answer: 1) can the Wagner Cone stem provide acceptable mid- to long-term implant survivorship; 2) help minimizing perioperative adverse events; 3) produce favorable clinical outcome measured by WOMAC score; and 4) be associated with a favorable radiographic femoral bone remodeling at the last follow-up?

HYPOTHESIS

Wagner Cone stem is an advantageous solution for the distorted proximal femur in complex THA.

PATIENTS AND METHOD

Our cohort was derived from the patient registries where medical records of 88 patients (103 hips) who underwent primary THA using the Wagner prosthesis were retrospectively reviewed. Then, data was analyzed for patients' demographics and surgical data, and comparing preoperative, immediate postoperative and last follow-up data. Eleven patients (12 hips) were excluded (7 hips followed up less than 2 years or lost to follow-up, 3 hips that had the Wagner stem for revision and 2 Wagner stems inserted for periprosthetic fracture). This left 77 patients (91 hips) with Wagner cone stems implanted for more than 2 years between March 2003 and February 2017 by 7 surgeons in 3 academic hospitals. Implant revision, reoperations, WOMAC score and radiographic analyses were recorded at last follow-up.

RESULTS

After a mean follow-up of 7.8 (range, 2.0-16.2) years, Wagner stem survivorship was 98.9% (95% CI: 94 to 100%) with one (1.1%) stem revision for failure of osteointegration. Five (5.5%) acetabular revisions, one for aseptic loosening, 2 for adverse reaction to metal debris and 2 for infection. One (1.1%) sciatic neuropathy and 4 (4.4%) intraoperative fractures were encountered. The mean WOMAC score was 90.5±11.4 (59-100). Radiographic analysis showed clear signs of stem osseointegration and hypertrophic bone remodeling in 82 cases (92.1%).

CONCLUSIONS

Used in complex cases with proximal distorted femurs, the Wagner Cone stem demonstrated a low complication rate, a high-rate consistent adaptive bone remodeling, excellent clinical results, and midterm survival. It is a safe, reliable and advantageous option in complex primary THA. However, the contribution of the underlying cause of the secondary osteoarthritis on the long-term survival of the stem remains to be demonstrated.

LEVEL OF EVIDENCE

IV; retrospective study.

Outcome of the Wagner Cone femoral component for difficult anatomical conditions during total hip arthroplasty

PURPOSE

Total hip arthroplasty (THA) in patients with small or unusual proximal femoral anatomy is challenging due to sizing issues, control of version, and implant fixation. The Wagner Cone is a monoblock, fluted, tapered stem with successful outcomes for these patients; however, there is limited information on subsidence, a common finding with cementless stems.

METHODS

We retrospectively reviewed our cases using the modified Wagner Cone (Zimmer, Warsaw, IN) implanted over a 13-year period (2006-2019) in patients with small or abnormal proximal femoral anatomy. We performed 144 primary THAs in 114 patients using this prosthesis. Mean follow-up was 4.5 ± 3.4 years (range, 1-13 years). Common reasons for implantation were hip dysplasia (52%) and osteoarthritis in patients with small femoral proportions (22%). Analysis of outcomes included assessment of stem subsidence and stability.

RESULTS

Survival was 98.6% in aseptic cases; revision-free survival was 97.9%. Femoral subsidence occurred in 84 cases (58%). No subsidence progressed after 3 months. Of those that subsided, the mean distance was 2.8 ± 2.0 mm. There was less subsidence in stems that stabilized prior to six weeks (2.2 ± 1.4 mm) compared to those that continued until 12 weeks (3.9 ± 1.6, p = 0.02). Harris Hip, UCLA, and WOMAC scores significantly improved from pre-operative evaluation (p < 0.001*, p < 0.003*, p ≪ 0.001*); there was no difference in outcome between patients with and without subsidence (p = 0.430, p = 0.228, p = 0.147).

CONCLUSION

The modified Wagner Cone demonstrates excellent clinical outcomes in patients with challenging proximal femoral anatomy. Subsidence is minor, stops by 3 months, and does not compromise clinical outcome.

Effect of trochanter displacement on impingement and bone contact in total hip arthroplasty performed after curved intertrochanteric varus osteotomy for osteonecrosis of the femoral head: a simulation study

Background

Curved intertrochanteric varus osteotomy (CVO) is a useful treatment option for osteonecrosis of the femoral head (ONFH). However, the effect of proximal femoral deformity in cases of CVO converted to total hip arthroplasty (THA) remains unclear. The aim of this study was to evaluate the effect of trochanter displacement on impingement and the contact state of the implant and femur in THA.

Methods

Thirty-eight hips that had undergone CVO for ONFH were reviewed and compared with a control group of 30 contralateral hips that had not undergone surgery. The range of motion (ROM) and impingement patterns and the percentage of cortical bone in the stem placement within the femur were measured by simulation using CT-based three-dimensional template software. We also measured the ROM and the number of joints that achieved the ROM required for activities of daily living when the upward displaced apex of the greater trochanter with osteotomy was resected and compared the findings with those obtained when the apex was not resected.

Results

The CVO group showed a significantly greater bony impingement in external rotation (68.4% vs. 43.3%, p = 0.033) and abduction (78.9% vs. 33.3%, p < 0.001) than in the control group. The CVO group showed a significantly smaller range of external rotation (19.0° [interquartile range; 4.0–28.8] vs. 38.0° [interquartile range; 36.0–41.8], p < 0.001) and abduction (23.0° [interquartile range; 8.5–38.8] vs. 56.0° [interquartile range; 50.3–60.0], p < 0.001) than in the control group. Significantly more joints achieved the ROM necessary for activities of daily living when the apex was resected than when it was not (10.5% vs. 63.2%, p < 0.001). The percentage of cortical bone in the stem placement position was significantly higher in the CVO group than in the control group in the proximal portion of the stem (25.5% vs. 0.0%, p < 0.001).

Conclusion

In cases requiring conversion to THA, we recommend resecting the upward displaced apex to achieve a sufficient ROM and carefully resecting the bone to avoid malignment of the stem.

Total hip arthroplasty after seven decades of a Girdlestone situation due to tuberculous coxitis in childhood

Introduction

Tuberculous coxitis accounts for about 15% of all osteoarticular tuberculosis cases and is the second most common after spinal tuberculosis. In extensive cases, Girdlestone resection arthroplasty is an option for primary surgical treatment followed in the course of time, with total hip arthroplasty (THR) to increase function. However, the remaining bone stock is generally poor. In these cases, the Wagner cone stem offers good pre-conditions for bone restoration even seven decades after Girdlestone, as presented here.

Case Report

A 76-year-old male patient was admitted to our department with a painful hip, who had previously been treated with Girdlestone at the age of 5 years after being diagnosed with tuberculous coxitis. After an intensive and very detailed evaluation of treatment options, the decision fell on rearticulating with a THR, even though primary surgery lay seven decades back. Since it was not possible to insert an appropriate non-cemented pressfit-cup, an acetabular reinforcement ring and a PE low profile cup were inserted, cemented with less inclination to avoid or reduce hip instability. A fissure around the implant (Wagner cone stem) was secured with numerous cerclages. Surgery was performed by the senior author (A.M.N.) postoperatively, the patient suffered a prolonged delirium. Ten months after surgery, the patient was satisfied with the result and reported a meaningful improvement in his daily quality of life. His mobility increased significantly and represented by his ability to climb stairs without being in pain or needing walking aids. Today, 2 ½ years after THR surgery, the patient still reports being satisfied and pain free.

Conclusion

Despite transient complications postoperatively, we are happy to report a very satisfactory clinical and radiologic outcome after 10 months. The today 79-year-old patient reports having a higher quality of life since rearticulation of his Girdlestone situation. However, the long-term effects and survival rate of this procedure need to be observed furthermore.

Mid-term outcomes of the Wagner Cone Prosthesis™ stem for developmental dysplasia of the hip: minimum two year follow-up

PURPOSE

Treatment of symptomatic developmental dysplasia of the hip (DDH) requires a technically demanding total hip arthroplasty (THA) reconstruction. In patients with DDH, prostheses can be difficult to implant and often face the risk of fracture, mismatch, and loosening. The Wagner Cone Prosthesis™ is a tapered, conical stem which can improve treatment success in this population. We look at midterm survivorship and outcomes of THA for DDH using the Wagner Cone Prosthesis™.

METHODS

We retrospectively analyzed 28 patients (33 hips) with DDH undergoing THA using the Wagner Cone Prosthesis™ between January 2008 and January 2020. Ten, nine, and fourteen included patients were classified as Hartofilakidis A, B, and C, respectively. Survivorship according to Kaplan-Meier analysis was the primary outcome, with re-operation and revision as endpoints. The Oxford hip score (OHS) was used to assess clinical outcome. We used multivariate analysis to determine predictors of poor outcomes. The average follow-up was 4.6 years, with a minimum of two years.

RESULTS

Kaplan-Meier survivorship over the 13-year study period was 93.9 ± 4.2% for all-cause revision as an endpoint and 96.9 ± 3.1% for stem revisions only. The overall reoperation rate was 6.1%, with periprosthetic fracture and dislocation being reasons for re-operation. No patients were revised for aseptic loosening, and no patients were revised for subsidence. OHS improved from 19.3 ± 9.6 (4-39) pre-operatively to 37.6 ± 8.4 (19-48) at latest follow-up (p < 0.05).

CONCLUSION

In patients with DDH, THA with the Wagner Cone Prosthesis™ demonstrates excellent clinical, radiographic, and patient-reported functional outcomes at midterm follow-up.

Short-term results of total hip arthroplasty using a tapered cone stem for patients with previous femoral osteotomy

PURPOSE

In total hip arthroplasty (THA) for patients with previous femoral osteotomy, we hypothesized that a tapered cone stem may be an option due to the altered morphology of the proximal femur. The purpose of this study was to assess the short-term results of THA after femoral osteotomy using a tapered cone stem, and to identify issues that require further attention.

METHODS

Twenty-two hips in 21 consecutive patients who underwent THA after femoral osteotomy using a Wagner Cone tapered cone stem were retrospectively reviewed, with a mean follow-up period of 34.4 (range, 24-50) months. Clinical information was obtained from medical records. On preoperative radiographs, the Dorr type was classified based on the anteroposterior cortical index. On postoperative radiographs, the degree of stem subsidence and the stem location with the highest canal fill ratio were assessed.

RESULTS

The mean Harris hip score significantly improved from 55.2 at baseline to 84.8 at final follow-up. Radiologically, stem subsidence (>3 mm) was observed in seven hips, and it stabilized within 1 year after THA in all cases. In five of seven hips with stem subsidence, the highest postoperative canal fill ratio was observed in the distal third of the stem. The proportions of males and Dorr type A were significantly higher among hips with stem subsidence than among those without. During the follow-up period, no hips showed implant loosening or required revision surgery.

CONCLUSIONS

The occurrence of stem subsidence should be noted when using Wagner Cone stems for Dorr type A femurs after femoral osteotomy.

Clinical Outcomes of Conical Hip Prosthesis Used In Primary Total Hip Arthroplasty

INTRODUCTION

Congenital dysplasia of the hip, presence of intramedullary bony pedestals, and related pathologies present unique challenges to the orthopaedic surgeon when considering total hip arthroplasty (THA). In these circumstances, a conical prosthesis has proven to be effective. The purpose of this study is to report the short-term radiological and clinical outcomes of the Wagner Cone Prosthesis® (Zimmer Biomet, Warsaw, Indiana) utilized for a range of etiologies at a major North American healthcare system.

MATERIALS AND METHODS

A retrospective study was performed at a single healthcare system between 2007 and 2018. Demographic variables, including age, sex, and laterality, as well as surgical variables, including femoral head size, neck-shaft angle, stem diameter, surgical approach, and indication for THA, were collected for each hip. Radiographs were also examined for subsidence, limb length discrepancy (LLD), and Crowe classification if the hip was dysplastic.

RESULTS

Thirty-one THAs were performed using a Wagner Cone Prosthesis®. No intraoperative or postoperative implant-related complications were reported. Fourteen hips were dysplastic, and of these, 10 were classified as Crowe I, one as Crowe II, two as Crowe III, and one as Crowe IV. No implant was observed to have subsidence greater than 1cm. The average LLD following arthroplasty was 1.38mm ± 9.4mm shorter than the contralateral side.

CONCLUSION

The Wagner Cone Prosthesis® serves as a useful implant for THA. In our sample, it had excellent survivorship, impressive postoperative radiographic measurements obtained from most recent follow up, minimal mean subsidence, and minimal complication rates.

Total Hip Arthroplasty With a Monoblock Conical Stem in Dysplastic Hips: A 20-Year Follow-Up Study

BACKGROUND

Total hip arthroplasty in patients with hip dysplasia is challenging as a result of complex anatomic deformities in the hip. The aim of the study was to evaluate the survivorship, the clinical and radiographic outcomes of cementless Wagner Cone stem in patients with dysplastic hip.

METHODS

This retrospective study reports on 102 patients (135 hips) who have undergone total hip arthroplasty between 1993 and 1997. The mean age of patients was 51 years (range, 21-73). Minimum follow-up was 20 years. According to the Crowe classification, 38 hips presented dysplasia of grade I, 41 of grade II, 37 of grade III, and 19 of grade IV.

RESULTS

Kaplan-Meier survivorship for aseptic loosening was 97% (95% confidence interval, 94.4-99.6) at 20 years. The average Harris hip score increased from 43.4 points (range, 22-51) to 86.4 points (range, 39-100) (P < .0001) and average Merle d'Aubignè score increased from 8.4 (range, 4-13) to 15 (range, 5-18) (P < .0001); at the last follow-up, average University of California at Los Angeles activity score and visual analog score were 4.53 (range, 1-9) and 1.25 (range, 0-6), respectively; 17% of heterotopic ossification and 19.2% of radiolucency lines around the stem were reported.

CONCLUSION

Monoblock Wagner Cone stem is a reliable option in dysplastic hip with an excellent survivorship and good clinical and radiographic outcome in the long term.

Wagner Cone Midterm Survivorship and Outcomes

BACKGROUND

Total hip arthroplasty (THA) in patients with abnormal proximal femoral anatomy requires an individualized treatment approach to prevent complications. Metaphyseal engaging stems in this population risk fracture, size/offset mismatch, and aseptic loosening. The Wagner conical femoral implant is a short diaphyseal engaging femoral stem that could improve treatment success in this difficult patient population.

METHODS

We identified 302 consecutive patients undergoing THA using the Wagner cone femoral prosthesis between January 2010 and January 2017. Clinical, radiographic, and patient-reported outcomes were obtained through chart review and radiographic measurements of postoperative X-rays. We used multivariate analysis to determine predictors of poor outcomes. Kaplan-Meier curves were created to demonstrate implant survivorship with reoperation and revision as endpoints. The average follow-up was 3.2 years, with a minimum of 2 years.

RESULTS

The implant retention survival rate during the 3.2-year study period was 98.7%. The overall reoperation rate was 4.2%, with infection followed by fracture being the most common reasons for reoperation. No patients were revised for aseptic loosening, and no patients were revised for subsidence. The average subsidence was 1.1 mm. The Harris Hip Score improved from 48.6 ± 7.3 (range, 28-64) preoperatively to 86.1 ± 8.5 (range, 66-100) at latest follow-up. The patient-reported satisfaction rate was 98.3%.

CONCLUSION

The Wagner cone femoral prosthesis demonstrated excellent clinical, radiographic, and patient-reported functional outcomes at midterm follow-up. We recommend use of the Wagner cone in THA patients with challenging proximal femoral anatomy, small femoral diameter, or poor metaphyseal bone quality.

Modular stem in total hip arthroplasty for patients with trochanter valgus deformity: surgical technique and case series

Background

Trochanter valgus deformity (TVD) is a rare condition of total hip arthroplasty (THA). Femoral osteotomy could be required in correcting the deformity to implant femoral stem in severe TVD. In this study, we described one unpublished technique of reverse sleeve of S-ROM to get through the complex situation. This study aimed to summarize and evaluate its technical challenges, safety and effectiveness.

Methods

From January 2006 to December 2014, we enrolled patients whose sleeves were implanted towards the great trochanter in THA with TVD. Their demographics, perioperative and postoperative information were recorded. To explore its indication, we measured and analyzed the ratio of greater trochanter/lesser trochanter (G/L ratio) and trochanter valgus angle (TVA).

Results

Twelve patients (1 male and 11 female, average age 42.30 ± 10.23) had mean follow-up of 6 years. Among them, only two patients had intraoperative femoral fracture. The survivorship of femoral prosthesis was 100%. The Harris hip score (HHS) increased from preoperative 34.31 ± 14.43 to postoperative 84.12 ± 11.33. All patients’ G/L ratio were larger than 1.50.

Conclusions

The reverse sleeve of S-ROM was a reliable method for the patients with severe TVD, which brought satisfying clinical outcomes in mid-term follow-up.

[Total hip arthroplasty with Wagner Cone stem and subtrochanteric shortening osteotomy in treatment of Crowe developmental dysplasia of hip in adults]

Objective

To investigate the short-term effectiveness of total hip arthroplasty with Wagner Cone stem combined with subtrochanteric shortening osteotomy for adult patients with Crowe Ⅳ developmental dysplasia of the hip (DDH).

Methods

A clinical data of 18 patients (20 hips) with Crowe Ⅳ DDH between January 2015 and June 2017 was retrospectively analyzed. There were 5 males (6 hips) and 13 females (14 hips), with an average age of 42 years (range, 20-67 years). There were 18 cases with unilateral DDH and 2 cases with bilateral DDHs. The "4" sign and Trendelenburg sign of affected hip were positive. Preoperative Harris score and visual analogue scale (VAS) score were 41.95±6.90 and 5.05±1.15, respectively. The length discrepancy was (4.76±2.59) cm in patients with unilateral DDH. And the lengths of bilateral lower limbs in patients with bilateral DDH were equal. The acetabular anteversion angle, femoral anteversion angle, and combined anteversion angle were (32.82±2.79), (46.18±6.80), and (79.01±7.54) °, respectively. All patients were treated by total hip arthroplasty with Wagner Cone stem and subtrochanteric shortening osteotomy. The length of osteotomy ranged from 2.0 to 3.5 cm (mean, 2.38 cm).

Results

The operation time was 116-161 minutes (mean, 138.4 minutes); the volume of intraoperative blood loss was 600-1 200 mL (mean, 795 mL); the volume of drainage after operation was 100-630 mL (mean, 252 mL). All incisions healed by first intention. The symptom of sciatic nerve injury occurred in 1 case and relieved after symptomatic treatment. All patients were followed up 12-29 months (mean, 18.4 months). The "4" sign and Trendelenburg sign of affected hip were negative. The Harris score and VAS score at last follow-up were 87.50±5.06 and 0.75±0.85, respectively. The acetabular anteversion angle, femoral anteversion angle, and combined anteversion angle were (16.21±4.84), (18.99±2.55), and (35.20±5.80)°, respectively. There were significant differences in above indexes between pre- and post-operation ( P<0.05). The length discrepancy was (0.72±0.70) cm in patients with unilateral DDH, which was significant shorter than the preoperative value ( t=7.751, P=0.000). And the lengths of bilateral lower limbs in patients with bilateral DDH were equal. X-ray films showed that the osteotomy of femur healed at 3-6 months (mean, 4.1 months) without the signs of loosening, sinking, osteolysis, and dislocation.

Conclusion

Total hip arthroplasty with Wagner Cone stem and subtrochanteric shortening osteotomy can obviously improve the hip joint function and restore the length of lower limb. The short-term effectiveness is satisfactory, but the long-term effectiveness and survival rate of prosthesis need to be further observed.

Challenging Implantation of Hip Prosthesis in a 32-year-old Patient with Kniest Syndrome

INTRODUCTION

Kniest dysplasia is associated with short body stature (dwarfism) and impairment of the musculoskeletal system due to a mutation in the COL2A1 gene coding for a protein that forms type II collagen. Hip endoprosthesis for patients with Kniest system requires a specific femoral shaft design since the medullar space is limited due to the underlying dysplasia. The Wagner cone stem has shown excellent results. It is especially suitable for patients with small or dysplasic femur. However, no data exist regarding hip endoprosthesis in a patient with Kniest syndrome.

CASE REPORT

A 32-year-old female patient with Kniest syndrome presented at our department with a painful pseudarthrosis after femoral valgisation osteotomy 8 years ago. A Wagner cone stem and acetabular roof cup with a cemented Ecofit cup 2M (dual-articulation acetabular cup system) were implanted due to a dysplastic femur with a small medullary space. The Ecofit cup itself is associated with a reduced risk of dislocation. The patient was satisfied with the range of motion after hip endoprosthesis and reported a significant increase in quality of life. The patient is still comfortable with the hip prosthesis at the most recent follow-up 4 years after implantation. Follow-up radiographs over 4 years have not revealed any signs of loosening or migration, and no Trendelenburg sign was reported for the affected side.

CONCLUSION

The Wagner cone stem provides a good solution in challenging femora caused by previous osteotomies, fractures, or dysplasia. Additional stability of hip prosthesis can be achieved using a dual articulation acetabular cup system. Furthermore, we applied an attachment tube based on the concept of tumorprosthesis where the abductor muscle group got reattached.

Is there still a role for threaded acetabular cups?

INTRODUCTION:

Total hip arthroplasty (THA) is 1 of the most common procedures in orthopaedic surgery. Different options and implants are currently available. Uncemented hip cups need primary stability for bone ingrowth, the use of screws is required when the desired stability is not achieved. Another option is the use of a hemispherical threaded cup with enhanced primary stability. The purpose of our study was to compare the results of a 3rd-generation threaded cup versus a press-fit cup with a long track record.

MATERIALS AND METHODS:

A consecutive series of 300 THAs performed by 2 surgeons was retrospectively reviewed, 150 press-fit cups and 150 screwed cups. Minimum follow-up 27 months; maximum 78 months (mean 52.5 months). The primary endpoint was a stable and painless THA, secondary endpoints included Hip disability and Osteoarthritis Outcome Score, Junior and radiographic evaluation.

RESULTS:

Preliminary results showed no statistically significant differences between the 2 groups for all the evaluated parameters, the number of early mechanical loosening was higher for press-fit cups, but this value was not statistically significant. At a mean follow-up of 52.5 months 1 cup revision (0.3%) was seen in the screwed cup group and 2 (0.6%) in the press-fit cup; these results were not statistically significant.

DISCUSSION AND CONCLUSION:

The main concern for screwed cups is the greater bone loss and possible removal difficulties during revision surgery. This study has some limitations, in particular regarding follow-up, but is still ongoing. Our results showed no difference between the 2 systems.

Is a short stem suitable for patients with hip dysplasia? A report on technical problems encountered during femoral reconstruction

INTRODUCTION

A wide variety of stems have been used for the treatment of osteoarthritis secondary to advanced hip dysplasia. Since evidence for using short stems in dysplastic hips is limited, we planned to analyse the technical problems encountered when reconstructing the proximal femur of patients with osteoarthritis secondary to congenital dysplasia of the hip treated with total hip arthroplasty (THA) using a type 2B short stem.

METHODS

We prospectively analysed 17 patients (22 hips) treated with primary THA performed with a single-branded short uncemented stem with metaphyseal fixation (MiniHip™; Corin). We excluded cases in which other type of stems were used, or in which retrospective data was only available. Mean follow-up was 41.22 months (minimum 24). We analysed clinical outcome using the modified Harris Hip Score (mHHS) and pain using the visual analogue scale (VAS). Radiographs were examined in order to determine causes of complications and revision surgery.

RESULTS

All patients showed statistically significant improvement when preoperative and postoperative values for mHHS (54.19 vs. 94.57; p = 0.0001) and for pain VAS (8.71 vs. 0.71; p = 0.0003) were compared. No cases of thigh pain, instability or infection were found. 1 case of acetabular cup loosening and 1 case of periprosthetic fracture were diagnosed at 8 months and 45 days, respectively. Overall survival was 84.7% at 5 years (CI 95%, 64.4-105.3) with revision for any reason as an end point. When stem performance was separately evaluated, it showed a survival rate of 100% at 5 years with revision for aseptic loosening as an end point.

CONCLUSIONS

THA with a type 2B short stem for the treatment of dysplastic osteoarthritis showed very few technical intraoperative problems, being a useful alternative for femoral reconstruction.

Long-term survival of the cemented Müller CDH stem: a minimum follow-up of 10 years

INTRODUCTION

Total hip arthroplasty in patients with altered anatomy of the hip and femur, such as in congenital dysplasia of the hip, is challenging and often requires specially designed stems. Müller straight stems have shown excellent long-term results; however, long-term data on the analogous cemented Müller CDH stem are still missing. The aim of this study was to analyze long-term survival, identify potential risk factors for aseptic loosening, and analyze radiological outcome of the cemented Müller CDH stems.

MATERIALS AND METHODS

Between 01/1985 and 06/2005, 95 Müller CDH stems (Zimmer, Winterthur, Switzerland) made up of 3 different materials were cemented using 2 different bone cements: 38 of stainless steel/high-viscosity cement, 31 of a cobalt-chrome-based alloy (CoCr)/low-viscosity cement, and 26 of a titanium-based alloy (Ti)/low-viscosity cement. All patients had a prospective clinical and radiological follow-up according to the standards of our institution. The cumulative incidence for revision of the stem was calculated using a competing risk model. To identify demographic and implant-related risk factors for aseptic loosening of the stem, a multivariate regression model for competing risks was performed.

RESULTS

The cumulative risk of revision at 15 years was 12.5% (95% CI 6.6-20.5%) for aseptic loosening of the stem as endpoint, with marked differences for the various stem materials used: stainless steel 2.7% (0.2-12.3%), CoCr 12.9% (4.0-27.3%), and Ti 24.5% (9.6-43.1%). Regression modeling revealed that Ti stems in combination with low-viscosity cement (HR 10.2) and implantation with an axis deviation greater than 3° (HR 3.8) are risk factors for aseptic loosening.

CONCLUSIONS

Long-term survival of the cemented Müller CDH stem is comparable to other Müller-type straight stems and uncemented implants. Similar to the original Ti Müller straight stem, the Ti Müller CDH stem also showed an increased risk for aseptic loosening and should, therefore, no longer be used.

Developmental hip dysplasia treated by total hip arthroplasty using a cementless Wagner cone stem in young adult patients with a small physique

BACKGROUND

Developmental hip dysplasia (DDH) may lead to severe acetabular and femoral abnormalities that can render total hip arthroplasty (THA) challenging, especially in DDH patients with a small physique. Most conventional cemented or cementless femoral components are often difficult to implant in the narrow femoral canal and require slight version correction during surgery. The aim of this study was to present the mid-term results of THA in the treatment of DDH patients with a small physique using a cementless Wagner cone prosthesis (Zimmer®, US).

METHODS

Between January 2006 and March 2010, we retrospectively reviewed 50 patients who were treated at our center. A total of 50 patients (52 hips; 45 women, five men; mean age 32.5 years; range 27 to 38 years) who underwent THA were observed. The mean femoral medullary canal dimension at the isthmus was 7.6 mm (range 6.0 to 8.7). According to the Crowe classification, 19 hips presented dysplasia of grade I, while 33 presented dysplasia of grade II. All patients were treated with THA using a cementless Wagner cone prosthesis. Clinical and radiologic evaluations were performed on all patients.

RESULTS

The mean duration of follow-up was 7.7 years (range 5.4 to 10.5). The Harris hip score (HHS) improved from 63 ± 9 (range 55 to 70) pre-operatively to 92 ± 8 (range 88 to 100) at the last follow-up. The HHS at the most recent follow-up was excellent in 66% of patients (34 hips), good in 26% (14 hips), fair in 6% (3 hips), and poor in 2% (1 hip). Radiographic evaluation demonstrated excellent osteointegration of the implants. Stem subsidence was present in three stems, and the range of stem subsidence was 2 mm in two stems (3.9%) and 3 mm in one stem (1.9%). Femoral osteolysis was observed in nine hips (18%) in the proximal zones, and no distal osteolysis was noted. Heterotopic ossification was observed in three hips (5.8%); of these, two were classified as Brooker's grade 1, and one was classified as Brooker's grade 2 at the most recent follow-up. None of the implants were revised.

CONCLUSIONS

Based on the tapered shape and free setting of anteversion, the Wagner cone femoral stem facilitates its implantation in dysplastic hips. Therefore, this series of short stems with a smaller diameter can ensure safe implantation in narrow medullary canals, especially in young DDH patients with a small physique.

TRIAL REGISTRATION

Registration Number: ChiCTR-ORC-17011181 . Reg Date: 2017-04-19 00:44:59 Retrospective registration.

Is there a role for femoral offset restoration during total hip arthroplasty? A systematic review

Benefits of femoral offset restoration during total hip arthroplasty should be the reduction of bearing surfaces wear, implant loosening and dislocation rates. Modular neck stems ensure offset customization but fretting corrosion and catastrophic failures are well-documented complications. Since clinical evidences are needed to substantiate the effectiveness of femoral offset restoration and promote modular neck choice, we systematically reviewed the literature to ascertain whether femoral offset itself has a proven clinical influence: (1) on bearing surfaces wear, (2) implant loosening, (3) and dislocation rates. A systematic literature screening was conducted to find papers dealing with the influence of femoral offset on wear, dislocation and loosening, including articles with conventional radiographic femoral offset assessment and with comparative design. Observational studies, case reports, instructional course lectures, cadaveric and animal studies as well as biomechanical studies, letters to the editor, surgical techniques or technical notes were all excluded. No limits about publication date were supplied but only papers in English were taken into account. Data were extracted into an anonymous spreadsheet. Offset values, dislocation rates, wear rates, follow-up and surgical approaches were all detailed. Ten manuscripts were finally selected. A statistically significant correlation between femoral offset restoration and the reduction of conventional ultrahigh-molecular-weight polyethylene wear was found in two out of three papers investigating this issue, but no correlations were found between femoral offset and dislocation rates or implant loosening. Femoral offset modification influences ultrahigh-molecular-weight polyethylene liners wear, but no correlation was found with dislocation rates or implant loosening. Advantages on wear can be counterbalanced by the use of hard bearing surfaces or highly cross-linked polyethylene liners, besides the availability of larger femoral heads improving implant stability further reduces the importance of femoral offset restoration by means of modularity. We believe that efforts in restoring femoral offset during total hip arthroplasty do not translate into tangible clinical profits and consequently, we do not advise the routinely usage of modular neck stems in total hip arthroplasty.

LEVEL OF EVIDENCE

level III, systematic review of case-control studies.

The Wagner Cone Stem for the Management of the Challenging Femur in Primary Hip Arthroplasty

BACKGROUND

Splined conical stems offer design features that facilitate their use in the misshapen, dysplastic proximal femur.

METHODS

This study assessed the survivorship of a conical prosthesis when applied to secondary coxarthrosis because of a range of pathologies. Fifty-one prostheses were implanted in 50 patients with a mean age of 50 (range, 15-80) and a median follow-up of 34 months (range, 24-73 months). Indications for the stem included developmental (36), neuromuscular (7), post-traumatic or surgical (7), and inflammatory conditions (1). Survivorship, functional outcome (WOMAC [Western Ontaria and McMaster University Osteoarthrits Index], Oxford Hip Score, and UCLA [University of California Los Angeles]), health status (short form-12 [SF-12]), satisfaction, and osseointegration were determined.

RESULTS

Survivorship for aseptic loosening was 100% at 2 years and 98.04% for septic revision. Eight patients required reoperation, 4 for instability, and 1 each for infection, impingement, adverse reaction to metal debris, and pelvic insufficiency fracture. The mean WOMAC score was 85 (standard deviation [SD], 18), the mean Oxford Hip Score 84 (SD, 18), the mean physical SF-12 score was 48.3 (SD, 8.6), and the mean mental SF-12 was 53.7 (SD, 9.2), the mean satisfaction score was 91.5 (SD, 3.9), and the mean UCLA was 6 (SD, 1.6). All femoral components demonstrated osseointegration.

CONCLUSION

The cone femoral prosthesis demonstrates excellent early survival and osseointegration when applied to the challenging femur. Because of these encouraging results, we recommend this prosthesis be considered for the small, abnormal femur in primary hip arthroplasty.

Implant Design in Cementless Hip Arthroplasty

When performing cementless hip arthroplasty, it is critical to achieve firm primary mechanical stability followed by biological fixation. In order to achieve this, it is essential to fully understand characteristics of implant design. In this review, the authors review fixation principles for a variety of implants used for cementless hip replacement and considerations for making an optimal selection.

Custom-made femoral implants in total hip arthroplasty due to congenital disease of the hip: a review

Congenital disease of the hip (CDH) is a common reason for the development of secondary osteoarthritis at the hip joint and the need for total hip arthroplasty (THA). The distorted femoral anatomy in patients with CDH in combination with soft tissue considerations and leg length discrepancy complicate the procedure of THA and this sometimes precludes the implantation of classical industry designed femoral stems. In such cases a customised femoral implant must be used in order to optimise the fit of the stem to the femur, to improve strain distribution and to reconstruct hip biomechanics. The present study reviews the preoperative planning, the design and material selection of custom-made implants, the surgical techniques and the reported clinical results of the published literature on the use of custom-made femoral implants in patients with CDH.

Midterm Outcome of Cementless Total Hip Arthroplasty in Crowe IV-Hartofilakidis Type III Developmental Dysplasia of the Hip

BACKGROUND

Developmental dysplasia of the hip (DDH) is widespread in developing countries, and treating Crowe IV-Hartofilakidis Type III DDH in adults requires the use of a highly demanding technique.

METHODS

We sought to determine the outcome of cementless total hip arthroplasty using Zweymüller components to treat Crowe IV-Hartofilakidis Type III DDH. Fifty-eight patients (71 hips) with a mean age of 35.8 years at time of index operation were included in our study. The average duration of follow-up was 70.5 months. The acetabular component was placed in the true acetabulum in all cases, and subtrochanteric shortening osteotomy was performed in 61 hips.

RESULTS

With any component revision for any reason as the end point, Kaplan-Meier survivorship analysis at 98 months revealed a cumulative survival rate for implanted components of 91.40%. The mean Harris Hip Score improved from 35.6 preoperatively to 82.9 postoperatively. There were 20 cases of intraoperative fracture, 1 case of complete nerve palsy, and 7 cases of transient nerve palsy. Revision surgery was performed in 7 patients because of cup loosening in 1, severe polyethylene wear in 4, cup breakage in 1, and dislocation in 1.

CONCLUSIONS

Midterm results for cementless total hip arthroplasty in patients with Crowe IV-Hartofilakidis Type III DDH was satisfactory; however, intraoperative fracture and polyethylene wear were major complications.

Can a Conical Implant Successfully Address Complex Anatomy in Primary THA? Radiographs and Hip Scores at Early Followup

BACKGROUND

Total hip arthroplasty (THA) in patients with small or abnormal proximal femoral anatomy is challenging as a result of complex anatomic deformities in the hip. It is unclear which stem is the most appropriate for these patients. One possible implant design that may help meet this need is the modified Wagner Cone prosthesis, whose design consists of monoblock cone with splines; however, to our knowledge, no clinical results have been published using this implant.

QUESTIONS/PURPOSES

We evaluated the hip scores and radiographic results (including signs of osseointegration and subsidence) of complex primary THA using the modified Wagner Cone cementless femoral component in patients with small or abnormal proximal femoral anatomic proportions.

METHODS

Between 2006 and 2011, we performed 59 THAs on patients whose femoral geometry precluded the use of standard-sized implants. Of these, 49 (83%) received the modified Wagner Cone prosthesis. During this time, our indications for use of the Wagner Cone implant in such patients included: femoral neck retroversion, excessive anteversion of the femoral neck, or small proximal femora not suitable for standard implants. Of those, 40 patients with 49 THAs were available for radiographic and clinical followup at a minimum of 3 years, and no patients were lost to followup. The diagnosis included developmental dysplasia of hip (22 patients, 28 hips), secondary trauma or posttuberculosis osteoarthritis (nine patients, 10 hips), and hip disease secondary to other disorders (eight patients, nine hips) and osteonecrosis (one patients, two hips). Two versions of the stem with 135° (28 hips) or 125° (21 hips) neck angle versions were used to reestablish normal hip biomechanics. Version angle was chosen based on preoperative templating. Cementless cups with screws were used for the acetabulum. Mean followup was 4 years (range, 3-7 years). Study endpoints were the Harris hip score and radiographic evaluations by a surgeon not involved in the clinical care of the patients (QZ); radiographic analysis included evaluating for the presence or absence of signs of osseointegration (including Engh's criteria) and subsidence.

RESULTS

The Harris hip score improved from a mean of 41 ± 9 preoperatively to a mean of 85 ± 10 at last followup (p < 0.01). The mean vertical subsidence was 1.5 ± 1.1 mm. Radiographic evaluation demonstrated stability (no further subsidence) of all implants at last followup. Endosteal spot welds were found in 32 hips (65%). No progressive radiolucencies were observed. One patient (one hip) underwent revision surgery as a result of late infection; no other revisions were performed.

CONCLUSIONS

The modified Wagner Cone femoral stem has provided improvements in hip scores and promising short-term radiographic results at short-term followup in complex cementless THA associated with abnormal or small femoral anatomical proportions in which standard implants are inappropriate. Longer followup will be needed to see if these results endure. Randomized trials are needed to determine the optimal stem design for these patients.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

[Hip arthroplasty in the presence of proximal femoral deformity]

INTRODUCTION

Proximal femoral deformities may result in pain in the ipsilateral hip joint and profound functional disability, ultimately requiring arthroplasty. 

PROCEDURE

Primary hip replacement procedures in the presence of markedly altered anatomy of the proximal femur present a technical challenge for the orthopedic surgeon. The deformity and its underlying condition, whether congenital or acquired, may complicate canal preparation and affect the choices of implant, exposure and postoperative physiotherapy protocol. Furthermore, a two- or multi-stage treatment may be required, e.g. for implant removal, for femoral osteotomy or to rule out infection.

DISCUSSION

Treatment strategies must be individually tailored, respecting patient needs, the etiology, the anatomic site and the geometry of the deformity encountered, bone quality, soft tissue deficits, the presence of retained implants in the proximal femur, infection status and comorbidities.

[Arthroplasty for osteoarthritis secondary to hip dysplasia: Problem-oriented treatment strategies]

BACKGROUND

Because of anatomical variations total hip arthroplasty (THA) can be demanding in patients with osteoarthritis secondary to hip dysplasia.

OBJECTIVES

Depending on the degree of bony deformation, hip dislocation and soft tissue alteration numerous treatment strategies are available. This review describes current approaches that address frequent deformities.

MATERIALS AND METHODS

Review of relevant clinical studies, meta-analyses, and presentation of our own approach.

RESULTS

Pre-operative planning (based on a thorough clinical and radiographic examination) is essential. Acetabular reconstruction close to the primary acetabulum should always be intended. Roof augmentation and/or cup medialization can support stable bony implant fixation. Subtrochanteric shortening osteotomy of the femur is a demanding but reliable technique that avoids nerve damage in cases where inappropriate lengthening would be necessary (i.e., high riding dislocation).

CONCLUSIONS

Although the post-operative complication rate is elevated after THA for dysplastic hips compared with primary osteoarthritis, the overall functional results and implant survival are comparable.

Cementless femoral fixation in total hip arthroplasty

A number of cementless femoral stems are associated with excellent long-term survivorship. Cementless designs differ from one another in terms of geometry and the means of obtaining initial fixation. Strict classification of stem designs is important in order to compare results among series. Loosening and thigh pain are less prevalent with modern stem designs. Stress-shielding is present in most cases, even with newer stem designs.

Long-term results of intertrochanteric varus osteotomy for dysplastic osteoarthritis of the hip

The beneficial role of intertrochanteric varus or valgus osteotomy in the treatment of hip osteoarthrosis has been recognised since the 1920s. Even today, it has an important role to delay the need for hip replacement in younger patients. The purpose of this study was to evaluate the long-term results of intertrochanteric varus osteotomy for dysplastic osteoarthritis of the hip. Between 1980 and 1995, 52 hips with dysplastic osteoarthritis underwent an intertrochanteric varus osteotomy. All patients could be followed up after 17.8 years. Radiographic assessment included centre-edge (CE) angle of Wiberg and collodiaphyseal (CCD) angle. Dysplastic hip dislocation was classified according to Crowe. Osteoarthritis was graded according to Tönnis. Preoperative osteoarthritis was Tonnis grade 1 in 19 hips, grade 2 in 28 and grade 3 in five. Complications were also documented. Clinical evaluation included score according to Merle d'Aubigné, Harris Hip Score and range of motion. Six of 52 patients underwent total hip replacement (THR) within five years after intertrochanteric osteotomy. In these cases, preoperative osteoarthritis was grade 3 in four cases and grade 2 in one case according to Tönnis. Twenty-five of 52 patients underwent THR after an interval of five to ten years after intertrochanteric osteotomy. In these cases, preoperative osteoarthritis was grade 3 in one case and grade 2 in 24 cases according to Tönnis. Sixteen of 52 patients underwent THR after an interval of ten to 15 years after intertrochanteric osteotomy. In these cases, preoperative osteoarthritis was grade 2 in four cases and grade 1 in 12 cases according to Tönnis. In five patients the hip was functioning well after a period longer than 15 years. In all these cases osteoarthritis was grade 1 according to Tönnis. In 40.4% of patients, THR was delayed longer than ten years. The osteotomy performed well at a mean time of 9.7 years after the procedure (range 3-21). Intertrochanteric varus osteotomy for dysplastic osteoarthritis of the hip should be considered in early or mild osteoarthritic changes of the hip. Good prognosis with delay of THR of more than ten years can be expected to exceed 40%, even when indications are less than optimum.