Biomechanical analysis of two fixation methods for proximal chevron osteotomy of the first metatarsal

Biomechanical evaluation of the proximal chevron osteotomy in comparison to the Lapidus arthrodesis for the correction of hallux valgus deformities

Purpose

The proximal chevron osteotomy and the modified Lapidus arthrodesis are both procedures utilized for deformity correction in patients with severe symptomatic hallux valgus. The aim of the current study was to compare their biomechanical stability when using locking plate fixation.

Methods

Twelve matched pairs of human anatomical lower leg specimens underwent on one side a proximal chevron osteotomy with a medial locking plate and on the other side a modified Lapidus arthrodesis with a plantar locking plate utilizing an interfragmentary compression screw. All specimens underwent bone mineral density (BMD) assessment and were tested in a servohydraulic load frame which applied a load on the centre of the metatarsal head over 1000 loading cycles with subsequently ultimate load testing. Displacement of the proximal and distal bone segment, ultimate load, and bending stiffness were analyzed.

Results

Mean displacement of both procedures showed no statistically significant difference throughout all the loading cycles (0.213 ≤ p ≤ 0.834). The mean ultimate load of the proximal chevron osteotomy was 227.9 N (± 232.4) and of the modified Lapidus arthrodesis 162.9 N (± 74.6) (p = 0.754). The proximal chevron osteotomy (38.2 N/mm (± 24.9)) had a significantly higher bending stiffness compared to the modified Lapidus arthrodesis (17.3 N/mm (± 9.9)) (p = 0.009). There was no correlation between BMD and displacement in all loading cycles, ultimate load, and bending stiffness of either procedure (p > 0.05).

Conclusion

Although the bending stiffness of the chevron osteotomy was higher, there was no statistically significant difference between the surgical techniques in mean displacement and ultimate load. The BMD did not influence the overall stability of either reconstruction. Locking plate fixation increases the clinical value of the modified Lapidus arthrodesis by outweighing most of the biomechanical disadvantages in comparison to the proximal chevron osteotomy.

Fixation Performance of Bioabsorbable Zn-6Ag Pins for Osteosynthesis

Bioabsorbable implants have become the focus of the latest research for new bone implant materials. With favorable characteristics such as compatible mechanical characteristics, no long-term side effects, and even osteogenesis enhancing properties they seem to be the future of osteosynthesis. Besides these characteristics, they must perform on the same level as traditional implant materials regarding their mechanical support for bone healing. A particular focus in the research for bioabsorbable implants has been on metal alloys, as these have particularly good mechanical properties such as excellent maximum force and high stability. This study focused on the shear strength of new bioabsorbable zinc and magnesium pins in comparison to traditional implants such as K-wires and cancellous bone screws in bone-implant connections. During quasi-static and fatigue loading experiments, magnesium pins (MAGNEZIX, Syntellix AG, Hannover, Germany) and new zinc silver pins (Zn-6Ag) by Limedion (Limedion GmbH., Mannheim, Germany) were compared with conventional osteosynthetic materials. The pins made of the new bioabsorbable alloys withstood the cyclic loads to the same extent as the conventional osteosynthesis materials. In the quasi-static loading, it was shown that the novel Zn-6Ag from Limedion has the same shear strength as the magnesium pin from Syntellix, which is already in clinical use. In addition, the zinc pin showed significantly better shear strength compared to osteosynthesis with K-wires (p < 0.05).

Evaluation of Two Types of Intramedullary Jones Fracture Fixation in a Cyclic and Ultimate Load Model

Implant choice is a matter of concern in athletes and active patients who sustain a Jones fracture because they are prone to failure including non-union, screw failure, and refracture. The aim of this study was to compare the biomechanical behavior of a Jones fracture-specific screw (JFXS) with a cannulated headless compression screw (HCS) in a simulated partial weight-bearing and ultimate load Jones fracture fixation model. Ten matched pairs of human anatomical specimens underwent Jones fracture creation and consecutive intramedullary stabilization with a solid JFXS or a cannulated HCS. The bone mineral density was assessed prior to testing. Cyclic plantar to dorsal loading was applied for 1000 cycles, followed by load to failure testing. Angulation was measured by an opto-electronic motion capture system and mode of failure classification was determined by video analysis. Paired analysis showed no statistically significant difference between both screw constructs. Ultimate load reached 236.9 ± 107.8 N in the JFXS group compared with 210.8 ± 150.7 N in the HCS group (p = 0.429). The bone mineral density correlated positive with the pooled ultimate load (R = 0.580, p = 0.007) for all constructs and negatively with angulation (R = -0.680, p = 0.002) throughout cyclic loading. Solid fracture-specific and cannulated headless compression screws provide equal ultimate loads and stiffness for Jones fracture fixation. A low bone mineral density significantly impairs the construct stability and the ultimate load of both intramedullary screw constructs. © 2019 The Authors. Journal of Orthopaedic Research ® published by Wiley Periodicals, Inc. on behalf of Orthopaedic Research Society J Orthop Res 38:911-917, 2020.

Comparison of Plantar Pressure Distribution and Functional Outcome after Scarf and Austin Osteotomy

OBJECTIVE

To investigate the changes of plantar pressure distribution in patients who underwent either Austin or Scarf osteotomy and underwent a postoperative rehabilitation program.

METHODS

Between September 2006 and December 2007, 50 participants who suffered from mild to moderate hallux valgus deformity were prospectively included in this study. An Austin osteotomy (Austin group) was performed in 25 patients and a Scarf osteotomy (Scarf group) in 25 patients. Indication for the Scarf or Austin technique was made according to the consensus of the Austrian society of foot and ankle surgery. Plantar pressure analysis was performed at 4 weeks, 8 weeks, and 6 months postoperatively. Furthermore, range of motion and the American Orthopaedic Foot and Ankle Society (AOFAS) questionnaire were evaluated.

RESULTS

In the big toe and first metatarsal head region in groups, maximum force, peak pressure, and force-time integral increased significantly from 4 weeks to 6 months postoperatively (P ≤ 0.001). The mean AOFAS score increased from 60.7 preoperatively to 93.1 6 months after Austin surgery and from 56.7 preoperatively to 94.4 6 months after Scarf surgery. The Austin group had a mean range of motion (ROM) of 68.5° that increased to a mean ROM of 75.5° 6 months postoperatively, while the Scarf group had a mean ROM of 67.8° that increased to a mean ROM of 68.2° 6 months postoperatively.

CONCLUSION

Despite different surgical techniques and the degree of deformity, there were no differences in plantar pressure parameters and functional outcomes between both groups.

The relationship between the expression of TN and the efficiency of posterior spinal V osteotomy in patients with traumatic kyphosis

BACKGROUND

This study was conducted with the aim to investigate the relationship between Tetranectin (TN) and efficiency of posterior spinal V osteotomy in patients with traumatic kyphosis.

METHODS

Ninety-two patients with traumatic kyphosis admitted in our hospital from February 2014 to June 2016 were included whose serum TN levels were examined by ELISA. Using the mean level of TN as cut-off value, patients were classified into TN high level group (group I) and TN low level group (group II). The observation indexes, including operation time, intra-operational loss of blood, Cobb angle, postoperative complications and recurrence rate of kyphosis within post-operational 6 months were recorded for comparison.

RESULTS

TN level was significantly higher in group I [(6.19 ± 0.33) μmol/L] than that in group II [(5.29 ± 0.34) μmol/L] (P < .05). There was no significant difference in average age, sex, lesion site and average time from injury to operation between the two groups (all P > 0.05). Compared to group II, operation time in group I was significantly shortened (5.02 ± 1.15 VS 4.58 ± 0.53, P = .023), the intra-operational loss of blood decreased (2418.56 ± 362.06 VS 2235.84 ± 325.63, P = .013), post-operational Cobb angle decreased (11.10 ± 1.31 VS 6.93 ± 1.04, P = .000), and the incidence of postoperative complications (nail-breaking, rod-breaking and looseness) and recurrence rate decreased (18.8% VS 4.5%, P = .036; 10.4% VS 0.0%, P = .028).

CONCLUSION

Serum TN level is proved to be related to the efficiency of posterior spinal V osteotomy in patients with traumatic kyphosis, and may serve as a possible indicator for clinical treatment.

Biomechanical Comparison Study of Three Fixation Methods for Proximal Chevron Osteotomy of the First Metatarsal in Hallux Valgus

Background

Fixation of proximal chevron metatarsal osteotomy has been accomplished using K-wires traditionally and with a locking plate recently. However, both methods have many disadvantages. Hence, we developed an intramedullary fixation technique using headless cannulated screws and conducted a biomechanical study to evaluate the superiority of the technique to K-wire and locking plate fixations.

Methods

Proximal chevron metatarsal osteotomy was performed on 30 synthetic metatarsal models using three fixation techniques. Specimens in group I were fixated with K-wires (1.6 mm × 2) and in group II with headless cannulated screws (3.0 mm × 2) distally through the intramedullary canal. Specimens in group III were fixated with a locking X-shaped plate (1.3-mm thick) and screws (2.5 mm × 4). Eight metatarsal specimens were selected from each group for walking fatigue test. Bending stiffness and dorsal angulation were measured by 1,000 repetitions of a cantilever bending protocol in a plantar to dorsal direction. The remaining two samples from each group were subjected to 5 mm per minute axial loading to assess the maximal loading tolerance.

Results

All samples in group I failed walking fatigue test while group II and group III tolerated the walking fatigue test. Group II showed greater resistance to bending force and smaller dorsal angulation than group III (p = 0.001). On the axial loading test, group I and group II demonstrated superior maximum tolerance to group III (54.8 N vs. 47.2 N vs. 28.3 N).

Conclusions

Authors have demonstrated proximal chevron metatarsal osteotomy with intramedullary screw fixation provides superior biomechanical stability to locking plate and K-wire fixations. The new technique using intramedullary screw fixation can offer robust fixation and may lead to better outcomes in surgical treatment of hallux valgus.