Application of cell and biomaterial-based tissue engineering methods in the treatment of cartilage, menisci and ligament injuries

Magnetic Seeding of SPIO-BMSCs Into a Biphasic Scaffold Can Promote Tendon-Bone Healing After Rotator Cuff Repair

BACKGROUND

The tendon-bone interface (TBI) in the rotator cuff has a poor intrinsic capacity for healing, which increases the risk of retear after rotator cuff repair (RCR). However, facilitating regeneration of the TBI still remains a great clinical challenge. Herein, the authors established a novel strategy based on magnetic seeding to enhance the TBI regeneration.

HYPOTHESIS

Magnetic seeding bone marrow mesenchymal stem cells labeled with superparamagnetic iron oxide (SPIO-BMSCs) into a biphasic scaffold can promote tendon-bone healing after RCR.

STUDY DESIGN

Controlled laboratory study.

METHODS

BMSCs were labeled with SPIOs. Prussian blue staining, CCK-8 tests, Western blot, and quantitative reverse transcription polymerase chain reaction (PCR) were used to determine the optimal effect concentration of SPIOs on cell bioactivities and abilities. Then SPIO-BMSCs were magnetically seeded into a biphasic scaffold under a magnetic field. The seeding efficacy was assessed by a scanning electron microscope, and the potential mechanism in chondrogenic differentiation after seeding SPIO-BMSCs into the scaffold was evaluated by Western blot and PCR. Furthermore, the effect of SPIO-BMSC/biphasic scaffold on tendon-bone healing after RCR using a rat model was examined using histological analysis, enzyme-linked immunosorbent assay, and biomechanical evaluation.

RESULTS

BMSCs labeled with 100 μg/mL SPIO had no effect on cell bioactivities and the ability of chondrogenic differentiation. SPIO-BMSCs were magnetically seeded into a biphasic scaffold, which offered a high seeding efficacy to enhance chondrogenic differentiation of SPIO-BMSCs via the CDR1as/miR-7/FGF2 pathway for TBI formation in vitro. Furthermore, in vivo application of the biphasic scaffold with magnetically seeded SPIO-BMSCs showed their regenerative potential, indicating that they could significantly accelerate and promote TBI healing with superior biomechanical properties after RCR in a rat rotator cuff tear model.

CONCLUSION

Magnetically seeding SPIO-BMSCs into a biphasic scaffold enhanced seeding efficacy to promote cell distribution and condensation. This construct enhanced the chondrogenesis process via the CDR1as/miR-7/FGF2 pathway and further promoted tendon-bone healing after RCR in a rat rotator cuff tear model.

CLINICAL RELEVANCE

This study provides an alternative strategy for improving TBI healing after RCR.

Orthobiologics: a review

PURPOSE

The use of biologic materials in orthopaedics (orthobiologics) has gained significant attention over the past years. To enhance the body of the related literature, this review article is aimed at summarizing these novel biologic therapies in orthopaedics and at discussing their multiple clinical implementations and outcomes.

METHODS

This review of the literature presents the methods, clinical applications, impact, cost-effectiveness, and outcomes, as well as the current indications and future perspectives of orthobiologics, namely, platelet-rich plasma, mesenchymal stem cells, bone marrow aspirate concentrate, growth factors, and tissue engineering.

RESULTS

Currently available studies have used variable methods of research including biologic materials as well as patient populations and outcome measurements, therefore making comparison of studies difficult. Key features for the study and use of orthobiologics include minimal invasiveness, great healing potential, and reasonable cost as a nonoperative treatment option. Their clinical applications have been described for common orthopaedic pathologies such as osteoarthritis, articular cartilage defects, bone defects and fracture nonunions, ligament injuries, and tendinopathies.

CONCLUSIONS

Orthobiologics-based therapies have shown noticeable clinical results at the short- and mid-term. It is crucial that these therapies remain effective and stable in the long term. The optimal design for a successful scaffold remains to be further determined.

Systematic Review of Silk Scaffolds in Musculoskeletal Tissue Engineering Applications in the Recent Decade

During the past decade, various novel tissue engineering (TE) strategies have been developed to maintain, repair, and restore the biomechanical functions of the musculoskeletal system. Silk fibroins are natural polymers with numerous advantageous properties such as good biocompatibility, high mechanical strength, and low degradation rate and are increasingly being recognized as a scaffolding material of choice in musculoskeletal TE applications. This current systematic review examines and summarizes the latest research on silk scaffolds in musculoskeletal TE applications within the past decade. Scientific databases searched include PubMed, Web of Science, Medline, Cochrane library, and Embase. The following keywords and search terms were used: musculoskeletal, tendon, ligament, intervertebral disc, muscle, cartilage, bone, silk, and tissue engineering. Our Review was limited to articles on musculoskeletal TE, which were published in English from 2010 to September 2019. The eligibility of the articles was assessed by two reviewers according to prespecified inclusion and exclusion criteria, after which an independent reviewer performed data extraction and a second independent reviewer validated the data obtained. A total of 1120 articles were reviewed from the databases. According to inclusion and exclusion criteria, 480 articles were considered as relevant for the purpose of this systematic review. Tissue engineering is an effective modality for repairing or replacing injured or damaged tissues and organs with artificial materials. This Review is intended to reveal the research status of silk-based scaffolds in the musculoskeletal system within the recent decade. In addition, a comprehensive translational research route for silk biomaterial from bench to bedside is described in this Review.

Intra-articular gold induced cytokine (GOLDIC®) injection therapy in patients with osteoarthritis of knee joint: a clinical study

PURPOSE

To evaluate the safety and efficacy of a novel technique of preconditioning autologous blood with gold particles (GOLDIC®) and injection in patients with moderate to severe knee osteoarthritis (KOA).

METHODS

During this phase 2a, proof-of-concept (PoC) open label study, 83 consecutive patients that 64 patients met inclusion criteria (mean age: 64.8 years; 89 knees) with radiographically proven KOA, received four ultrasound guided intra-articular knee injections of GOLDIC® at three to six day intervals. Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) and Knee injury and Osteoarthritis Outcome Score (KOOS) were evaluated at baseline, four weeks, three, six months, one, two and four years (T1-T6). The incidence of treatment related severe adverse events (SAEs) recorded. Intra-articular gelsolin level in patients with effusion was determined.

RESULTS

KOOS and WOMAC scores improved for the full duration of the study (P < 0.05), minimal clinically important difference (MCID) was observed at all time points in all KOOS subscores, with no reported SAEs. Intra-articular gelsolin level increased after treatment with reduction of effusion. No statistically significant evidence of an association between patient demographics and outcome were identified. Nine patients failed treatment, with 32 months mean time to failure and underwent total knee arthroplasty.

CONCLUSION

PoC study of GOLDIC® as a novel device for conservative management of moderate to severe KOA was confirmed. GOLDIC® produces rapid and sustained improvements in all indices after treatment, with no SAEs.

TRIAL REGISTRATION

§ 13 Abs.2b AMG Bavaria (Protokol Reg OBB 5-16) (Ref 53.2-2677.Ph_3-67-2)-Date 3/20/2010 retrospectively registered.

The Use of Nanomaterials in Tissue Engineering for Cartilage Regeneration; Current Approaches and Future Perspectives

The repair and regeneration of articular cartilage represent important challenges for orthopedic investigators and surgeons worldwide due to its avascular, aneural structure, cellular arrangement, and dense extracellular structure. Although abundant efforts have been paid to provide tissue-engineered grafts, the use of therapeutically cell-based options for repairing cartilage remains unsolved in the clinic. Merging a clinical perspective with recent progress in nanotechnology can be helpful for developing efficient cartilage replacements. Nanomaterials, < 100 nm structural elements, can control different properties of materials by collecting them at nanometric sizes. The integration of nanomaterials holds promise in developing scaffolds that better simulate the extracellular matrix (ECM) environment of cartilage to enhance the interaction of scaffold with the cells and improve the functionality of the engineered-tissue construct. This technology not only can be used for the healing of focal defects but can also be used for extensive osteoarthritic degenerative alterations in the joint. In this review paper, we will emphasize the recent investigations of articular cartilage repair/regeneration via biomaterials. Also, the application of novel technologies and materials is discussed.

Platelet-rich gel-incorporated silk scaffold promotes meniscus regeneration in a rabbit total meniscectomy model

Aim: To investigate whether platelet-rich gel (PRG) incorporation could promote meniscal regeneration of the silk scaffold. Materials & methods: A PRG-incorporated silk sponge was fabricated for reconstruction of the meniscus in a rabbit meniscectomy model. Subsequently, characterization of the scaffold, as well as the in vitro cytocompatibility and in vivo function was evaluated. Results: Our results showed that the PRG-incorporated silk scaffold provided a sustained release of TGF-β1 over 1 week. The PRG enhanced the cytocompatibility in vitro and cell infiltration in vivo of the silk sponge. Meanwhile, the implantation of the composite in situ ameliorated the cartilage degeneration in knee at 3 months. Conclusion: These findings indicated that PRG-incorporated silk scaffold could promote functional regeneration of the meniscus and effectively prevented subsequent osteoarthritis after meniscectomy.

Chondrogenic Differentiation of Pluripotent Stem Cells under Controllable Serum-Free Conditions

The repair of damaged articular cartilage using currently available implantation techniques is not sufficient for the full recovery of patients. Pluripotent stem cells (iPSC)-based therapies could bring new perspectives in the treatment of joint diseases. A number of protocols of in vitro differentiation of iPSC in chondrocytes for regenerative purposes have been recently described. However, in order to use these cells in clinics, the elimination of animal serum and feeder cells is essential. In our study, a strictly defined and controllable protocol was designed for the differentiation of pluripotent stem cells (BG01V, ND 41658*H, GPCCi001-A) in chondrocyte-like cells in serum- and a feeder cell-free system, using the embryoid bodies step. The extension of the protocol and culture conditions (monolayer versus 3D culture) was also tested after the initial 21 days of chondrogenic differentiation. Promotion of the chondrogenic differentiation in 3D culture via the elevated expression of genes related to chondrogenesis was achieved. Using immunofluorescence and immunohistochemistry staining techniques, the increased deposition of the specific extracellular matrix was indicated. As a result, chondrocyte-like cells in the early stages of their differentiation using pellet culture under fully controlled and defined conditions were obtained.

Treatment of Articular Cartilage Defects: Focus on Tissue Engineering

The treatment of articular cartilage defects seems to be one of the greatest challenges in modern orthopaedics. From a medical point of view there are 3 main goals to achieve for cartilage trauma treatment: restoration of the joints motion, pain relief and elimination/delay of the onset of osteoarthritis. Treatment can be divided into conservative (including pharmacotherapy, arthrocentesis and physiotherapy) and surgical. The last comprises reparative techniques, regenerative methods and symptomatic treatment. While both are focused on reconstruction of the damaged cartilage, the difference lies in the type of filling tissue. Reparative techniques include: drilling of the subchondral bone, spongiolisation, abrasion, mictrofracture, and autologous matrix induced chondrogenesis (AMIC). Regenerative methods contain: periosteal and perichondral grafts, mosaicplasty, autologous chondrocyte implantation and matrix-induced autologous chondrocyte implantation (MACI). Nowadays tissue engineering, including gene therapy, is emerging as one of the key approaches to cartilage treatment and holds promises for new achievements and better outcomes of many cartilage diseases and traumas.

Effect of centrifugal force on the development of articular neocartilage with bovine primary chondrocytes

A lot has been invested into understanding how to assemble cartilage tissue in vitro and various designs have been developed to manufacture cartilage tissue with native-like biological properties. So far, no satisfactory design has been presented. Bovine primary chondrocytes are used to self-assemble scaffold-free constructs to investigate whether mechanical loading by centrifugal force would be useful in manufacturing cartilage tissue in vitro. Six million chondrocytes were laid on top of defatted bone disks placed inside an agarose well in 50-ml culture tubes. The constructs were centrifuged once or three times per day for 15 min at a centrifugal force of 771×g for up to 4 weeks. Control samples were cultured under the same conditions without exposure to centrifugation. The samples were analysed by (immuno)histochemistry, Fourier transform infrared imaging, micro-computed tomography, biochemical and gene expression analyses. Biomechanical testing was also performed. The centrifuged tissues had a more even surface covering a larger area of the bone disk. Fourier transform infrared imaging analysis indicated a higher concentration of collagen in the top and bottom edges in some of the centrifuged samples. Glycosaminoglycan contents increased along the culture, while collagen content remained at a rather constant level. Aggrecan and procollagen α₁(II) gene expression levels had no significant differences, while procollagen α₂(I) levels were increased significantly. Biomechanical analyses did not reveal remarkable changes. The centrifugation regimes lead to more uniform tissue constructs, whereas improved biological properties of the native tissue could not be obtained by centrifugation.

Forced differentiation in vitro leads to stress-induced activation of DNA damage response in hiPSC-derived chondrocyte-like cells

A human induced pluripotent stem cell line (GPCCi001-A) created by our group was differentiated towards chondrocyte-like cells (ChiPS) via monolayer culturing with growth factors. ChiPS are promising because they have the potential to be used in tissue engineering to regenerate articular cartilage. However, their safety must be confirmed before they can be routinely used in regenerative medicine. Using microarray analysis, we compared the ChiPS to both GPCCi001-A cells and chondrocytes. The analysis showed that, compared to both GPCCi001-A cells and chondrocytes, the expression of genes engaged in DNA damage and in the tumor protein p53 signalling pathways was significantly higher in the ChiPS. The significant amount of DNA double strand breaks and increased DNA damage response may lead to incomplete DNA repair and the accumulation of mutations and, ultimately, to genetic instability. These findings provide evidence indicating that the differentiation process in vitro places stress on human induced pluripotent stem cells (hiPSCs). The results of this study raise doubts about the use of stem cell-derived components given the negative effects of the differentiation process in vitro on hiPSCs.

An electrospun fiber reinforced scaffold promotes total meniscus regeneration in rabbit meniscectomy model

Low vascularization in meniscus limits its regeneration ability after injury, and tissue engineering is the most promising method to achieve meniscus regeneration. In this study, we fabricated a kind of composite scaffold by decellularized meniscus extracellular matrix/polycaprolactone (DMECM/PCL) electrospinning fibers and porous DMECM, in which DMECM/PCL fibers were used as reinforcing component. The tensile modulus of the composite scaffold in longitudinal and crosswise directions were 8.5 ± 1.9 and 2.3 ± 0.3 MPa, respectively. Besides that, the DMECM/PCL electrospinning fibers enhanced suture resistance of the composite scaffold more than 5 times than DMECM scaffold effectively. In vitro cytocompatibility showed that the porous structure provided by DMECM component facilitated meniscus cells' proliferation. DMECM was also the main component to regulate cell behaviors, which promoted meniscus cells expressing extracellular matrix related genes such as COL I, COL II, SOX9 and AGG. Rabbits with total meniscectomy were used as animal model to evaluated the composited scaffolds performance in vivo at 3 and 6 months. Results showed that rabbits with scaffold implanting could regenerate neo-menisci in both time points. The neo-menisci had similar histology structure and biochemical content with native menisci. Although neo-menisci had inferior tensile modulus than native ones, its modulus was improved with implanting time prolonging. MRI imaging showed the signal of neo-meniscus in the body is clear, and X-ray imaging of knee joints demonstrated the implantation of scaffolds could relief joint space narrowing. Moreover, rabbits with neo-menisci had better cartilage condition in femoral condyle and tibial plateau compared than meniscectomy group.

STATEMENT OF SIGNIFICANCE

We fabricated the meniscus scaffold by combining porous decellularized meniscus extracellular matrix (DMECM) and DMECM/PCL electrospinning fibers together, which used the porous structure of DMECM, and the good tensile property of electrospinning fibers. We believe single material cannot satisfy increasing needs of scaffold. Therefore, we combined not only materials but also fabrication methods together to develop scaffold to make good use of each part. DMECM in electrospinning fibers also made these two components possible to be integrated through crosslinking. Compared to existing meniscus scaffold, the composite scaffold had (1) soft structure and extrusion would not happen after implantation, (2) ability to be trimmed to suitable shape during surgery, and (3) good resistance to suture.

Mesenchymal Stem Cells in Oriented PLGA/ACECM Composite Scaffolds Enhance Structure-Specific Regeneration of Hyaline Cartilage in a Rabbit Model

Articular cartilage lacks a blood supply and nerves. Hence, articular cartilage regeneration remains a major challenge in orthopedics. Decellularized extracellular matrix- (ECM-) based strategies have recently received particular attention. The structure of native cartilage exhibits complex zonal heterogeneity. Specifically, the development of a tissue-engineered scaffold mimicking the aligned structure of native cartilage would be of great utility in terms of cartilage regeneration. Previously, we fabricated oriented PLGA/ACECM (natural, nanofibrous, articular cartilage ECM) composite scaffolds. In vitro, we found that the scaffolds not only guided seeded cells to proliferate in an aligned manner but also exhibited high biomechanical strength. To detect whether oriented cartilage regeneration was possible in vivo, we used mesenchymal stem cell (MSC)/scaffold constructs to repair cartilage defects. The results showed that cartilage defects could be completely regenerated. Histologically, these became filled with hyaline cartilage and subchondral bone. Moreover, the aligned structure of cartilage was regenerated and was similar to that of native tissue. In conclusion, the MSC/scaffold constructs enhanced the structure-specific regeneration of hyaline cartilage in a rabbit model and may be a promising treatment strategy for the repair of human cartilage defects.

Biochemical Stimulus-Based Strategies for Meniscus Tissue Engineering and Regeneration

Meniscus injuries are very common and still pose a challenge for the orthopedic surgeon. Meniscus injuries in the inner two-thirds of the meniscus remain incurable. Tissue-engineered meniscus strategies seem to offer a new approach for treating meniscus injuries with a combination of seed cells, scaffolds, and biochemical or biomechanical stimulation. Cell- or scaffold-based strategies play a pivotal role in meniscus regeneration. Similarly, biochemical and biomechanical stimulation are also important. Seed cells and scaffolds can be used to construct a tissue-engineered tissue; however, stimulation to enhance tissue maturation and remodeling is still needed. Such stimulation can be biomechanical or biochemical, but this review focuses only on biochemical stimulation. Growth factors (GFs) are one of the most important forms of biochemical stimulation. Frequently used GFs always play a critical role in normal limb development and growth. Further understanding of the functional mechanism of GFs will help scientists to design the best therapy strategies. In this review, we summarize some of the most important GFs in tissue-engineered menisci, as well as other types of biological stimulation.

Chondrogenesis of human bone marrow mesenchymal stem cells in 3-dimensional, photocrosslinked hydrogel constructs: Effect of cell seeding density and material stiffness

Three-dimensional hydrogel constructs incorporated with live stem cells that support chondrogenic differentiation and maintenance offer a promising regenerative route towards addressing the limited self-repair capabilities of articular cartilage. In particular, hydrogel scaffolds that augment chondrogenesis and recapitulate the native physical properties of cartilage, such as compressive strength, can potentially be applied in point-of-care procedures. We report here the synthesis of two new materials, [poly-l-lactic acid/polyethylene glycol/poly-l-lactic acid] (PLLA-PEG 1000) and [poly-d,l-lactic acid/polyethylene glycol/poly-d,l-lactic acid] (PDLLA-PEG 1000), that are biodegradable, biocompatible (>80% viability post fabrication), and possess high, physiologically relevant mechanical strength (∼1500 to 1800kPa). This study examined the effects of physiologically relevant cell densities (4, 8, 20, and 50×10⁶/mL) and hydrogel stiffnesses (∼150kPa to∼1500kPa Young's moduli) on chondrogenesis of human bone marrow stem cells incorporated in hydrogel constructs fabricated with these materials and a previously characterized PDLLA-PEG 4000. Results showed that 20×10⁶cells/mL, under a static culture condition, was the most efficient cell seeding density for extracellular matrix (ECM) production on the basis of hydroxyproline and glycosaminoglycan content. Interestingly, material stiffness did not significantly affect chondrogenesis, but rather material concentration was correlated to chondrogenesis with increasing levels at lower concentrations based on ECM production, chondrogenic gene expression, and histological analysis. These findings establish optimal cell densities for chondrogenesis within three-dimensional cell-incorporated hydrogels, inform hydrogel material development for cartilage tissue engineering, and demonstrate the efficacy and potential utility of PDLLA-PEG 1000 for point-of-care treatment of cartilage defects.

STATEMENT OF SIGNIFICANCE

Engineering cartilage with physiologically relevant mechanical properties for point-of-care applications represents a major challenge in orthopedics, given the generally low mechanical strengths of traditional hydrogels used in cartilage tissue engineering. In this study, we characterized a new material that possesses high mechanical strength similar to native cartilage, and determined the optimal cell density and scaffold stiffness to achieve the most efficient chondrogenic response from seeded human bone marrow stem cells. Results show robust chondrogenesis and strongly suggest the potential of this material to be applied clinically for point-of-care repair of cartilage defects.

Terapias Celulares y Productos de Ingeniería de Tejidos para el Tratamiento de Lesiones Condrales de Rodilla

El cartílago articular es un tejido vulnerable a las lesiones de diferente etiología; siendo uno de los más afectados,  el cartílago de la rodilla. Aunque la mayoría de los tratamientos convencionales reducen los síntomas, generalmente conducen a la formación de fibrocartílago; el cual, posee características diferentes a las del cartílago hialino de las articulaciones.  Son pocas las aproximaciones terapéuticas que promueven el  reemplazo del tejido dañado por cartílago hialino funcional; las más exitosas son las denominadas terapias avanzadas, que aplican células y  productos de ingeniería de tejidos con el fin de estimular la regeneración del cartílago. La mayoría de ellas se basan en colocar soportes  hechos con biomateriales de diferente origen, que sembrados o no con células exógenas o endógenas, reemplazan al cartílago dañado y promueven su regeneración. Este  trabajo revisa algunas de las aproximaciones terapéuticas enfocadas en la regeneración del cartílago articular de rodilla; así como, los biomateriales más empleados en la elaboración de soportes para terapia celular e ingeniería de tejido cartilaginoso.

Proliferative injection therapy for osteoarthritis: a systematic review

PURPOSE

To systematically analyse randomised controlled trials (RCTs) about efficacy and safety of proliferative injection therapy (prolotherapy) for treatment of osteoarthritis (OA).

METHODS

CENTRAL, Embase and MEDLINE were searched. Two reviewers independently conducted screening and data extraction. RCTs were assessed with the Cochrane risk of bias tool. Type of treatment, study design, dosing, efficacy outcomes and safety outcomes were analysed. The protocol was registered in PROSPERO (CRD42016035258).

RESULTS

Seven RCTs were included, with 393 participants aged 40-75 years and mean OA pain duration from three months to eight years. Follow-up was 12 weeks to 12 months. Studies analysed OA of the knee joint (n = 5), first carpometacarpal joint (n = 1) and finger joints (n = 1). Various types of prolotherapy were used; dextrose was the most commonly used irritant agent. All studies concluded that prolotherapy was effective treatment for OA. No serious adverse events were reported. The studies had considerable methodological limitations.

DISCUSSION

Limited evidence from low-quality studies indicates a beneficial effect of prolotherapy for OA management. The number of participants in these studies was too small to provide reliable evidence.

CONCLUSIONS

Current data from trials about prolotherapy for OA should be considered preliminary, and future high-quality trials on this topic are warranted.

Evaluation of Magnetic Nanoparticle-Labeled Chondrocytes Cultivated on a Type II Collagen-Chitosan/Poly(Lactic-co-Glycolic) Acid Biphasic Scaffold

Chondral or osteochondral defects are still controversial problems in orthopedics. Here, chondrocytes labeled with magnetic nanoparticles were cultivated on a biphasic, type II collagen-chitosan/poly(lactic-co-glycolic acid) scaffold in an attempt to develop cultures with trackable cells exhibiting growth, differentiation, and regeneration. Rabbit chondrocytes were labeled with magnetic nanoparticles and characterized by scanning electron microscopy (SEM), transmission electron (TEM) microscopy, and gene and protein expression analyses. The experimental results showed that the magnetic nanoparticles did not affect the phenotype of chondrocytes after cell labeling, nor were protein and gene expression affected. The biphasic type II collagen-chitosan/poly(lactic-co-glycolic) acid scaffold was characterized by SEM, and labeled chondrocytes showed a homogeneous distribution throughout the scaffold after cultivation onto the polymer. Cellular phenotype remained unaltered but with increased gene expression of type II collagen and aggrecan, as indicated by cell staining, indicating chondrogenesis. Decreased SRY-related high mobility group-box gene (Sox-9) levels of cultured chondrocytes indicated that differentiation was associated with osteogenesis. These results are encouraging for the development of techniques for trackable cartilage regeneration and osteochondral defect repair which may be applied in vivo and, eventually, in clinical trials.

AMECM/DCB scaffold prompts successful total meniscus reconstruction in a rabbit total meniscectomy model

Tissue-engineered meniscus regeneration is a very promising treatment strategy for meniscus lesions. However, generating the scaffold presents a huge challenge for meniscus engineering as this has to meet particular biomechanical and biocompatibility requirements. In this study, we utilized acellular meniscus extracellular matrix (AMECM) and demineralized cancellous bone (DCB) to construct three different types of three-dimensional porous meniscus scaffold: AMECM, DCB, and AMECM/DCB, respectively. We tested the scaffolds' physicochemical characteristics and observed their interactions with meniscus fibrochondrocytes to evaluate their cytocompatibility. We implanted the three different types of scaffold into the medial knee menisci of New Zealand rabbits that had undergone total meniscectomy; negative control rabbits received no implants. The reconstructed menisci and corresponding femoral condyle and tibial plateau cartilage were all evaluated at 3 and 6 months (n = 8). The in vitro study demonstrated that the AMECM/DCB scaffold had the most suitable biomechanical properties, as this produced the greatest compressive and tensile strength scores. The AMECM/DCB and AMECM scaffolds facilitated fibrochondrocyte proliferation and the secretion of collagen and glycosaminoglycans (GAGs) more effectively than did the DCB scaffold. The in vivo experiments demonstrated that both the AMECM/DCB and DCB groups had generated neomeniscus at both 3 and 6 months post-implantation, but there was no obvious meniscus regeneration in the AMECM or control groups, so the neomeniscus analysis could not perform on AMECM and control group. At both 3 and 6 months, histological scores were better for regenerated menisci in the AMECM/DCB than in the DCB group, and significantly better for articular cartilage in the AMECM/DCB group compared with the other three groups. Knee MRI scores (Whole-Organ Magnetic Resonance Imaging Scores (WORMS)) were better in the AMECM/DCB group than in the other three groups at both 3 and 6 months. At both 3 and 6 months, RT-PCR demonstrated that aggrecan, Sox9, and collagen II content was significantly higher, and mechanical testing demonstrated greater tensile strength, in the AMECM/DCB group neomenisci compared with the DCB group.