Endovascular Repair of a Complex Splenic Artery Aneurysm Using a Multilayer Stent

Acellular Tissue-Engineered Vascular Grafts from Polymers: Methods, Achievements, Characterization, and Challenges

Extensive and permanent damage to the vasculature leading to different pathogenesis calls for developing innovative therapeutics, including drugs, medical devices, and cell therapies. Innovative strategies to engineer bioartificial/biomimetic vessels have been extensively exploited as an effective replacement for vessels that have seriously malfunctioned. However, further studies in polymer chemistry, additive manufacturing, and rapid prototyping are required to generate highly engineered vascular segments that can be effectively integrated into the existing vasculature of patients. One recently developed approach involves designing and fabricating acellular vessel equivalents from novel polymeric materials. This review aims to assess the design criteria, engineering factors, and innovative approaches for the fabrication and characterization of biomimetic macro- and micro-scale vessels. At the same time, the engineering correlation between the physical properties of the polymer and biological functionalities of multiscale acellular vascular segments are thoroughly elucidated. Moreover, several emerging characterization techniques for probing the mechanical properties of tissue-engineered vascular grafts are revealed. Finally, significant challenges to the clinical transformation of the highly promising engineered vessels derived from polymers are identified, and unique perspectives on future research directions are presented.

A Study on the Pressure-Lowering Effect of the Multilayer Stent

BACKGROUND

The objective of the study was to investigate the hemodynamic changes of the blood flow in the aneurysm model after the multilayer stent placement using the fluid dynamic method, to analyze the effectiveness and properties of the multilayer stent in the treatment of aortic aneurysms.

METHODS

A water tank was filled with 5 L of experimental liquid after the circular flow pressure test platform with a glass aneurysm model, and a multilayer stent was built. Pressure at the middle part and the distal aneurysm neck part of the model was then measured. At each site, the pressure was measured 20 times at 1-min intervals, and the testing results were averaged for accuracy.

RESULTS

Without the stent, mean pressure at the middle part and at the distal aneurysm neck part of the model was 11.19 ± 0.23 Kpa and 13.31 ± 0.28 Kpa, respectively. With the stent, the mean pressure decreased to 10.60 ± 0.27 Kpa and 12.60 ± 0.29 Kpa, and the average difference was 0.59 ± 0.15 Kpa and 0.71 ± 0.15 Kpa, respectively.

CONCLUSIONS

After the placement of the multilayer stent, pressure inside the model at the middle part and distal neck part could both be diminished, yet the mean dropped pressure may be too small to be sufficient to cause significant impact on preventing the expansion of abdominal aortic aneurysm; therefore, the pressure-lowering effect of the multilayer stent for abdominal aortic aneurysm may not be ideal compared with the traditional covered stents.

Endovascular Treatment of Splenic Artery Aneurysm With a Stent-Graft: A Case Report

Splenic artery aneurysm, one of the most common visceral aneurysms, accounts for 60% of all visceral aneurysm cases. Open surgery is the traditional treatment for splenic artery aneurysm but has the disadvantages of serious surgical injuries, a high risk of complications, and a high mortality rate.We report a case who was presented with splenic artery aneurysm. A 54-year-old woman complained of upper left abdominal pain for 6 months. An enhanced computed tomography scan of the upper abdomen indicated the presence of splenic artery aneurysm. The splenic artery aneurysm was located under digital subtraction angiography and a 6/60 mm stent graft was delivered and released to cover the aneurysm. An enhanced computed tomography scan showed that the splenic artery aneurysm remained well separated, the stent graft shape was normal, and the blood flow was unobstructed after 1 year.This case indicates a satisfactory efficacy proving the minimal invasiveness of stent graft exclusion treatment for splenic artery aneurysm.

Medical Textiles as Vascular Implants and Their Success to Mimic Natural Arteries

Vascular implants belong to a specialised class of medical textiles. The basic purpose of a vascular implant (graft and stent) is to act as an artificial conduit or substitute for a diseased artery. However, the long-term healing function depends on its ability to mimic the mechanical and biological behaviour of the artery. This requires a thorough understanding of the structure and function of an artery, which can then be translated into a synthetic structure based on the capabilities of the manufacturing method utilised. Common textile manufacturing techniques, such as weaving, knitting, braiding, and electrospinning, are frequently used to design vascular implants for research and commercial purposes for the past decades. However, the ability to match attributes of a vascular substitute to those of a native artery still remains a challenge. The synthetic implants have been found to cause disturbance in biological, biomechanical, and hemodynamic parameters at the implant site, which has been widely attributed to their structural design. In this work, we reviewed the design aspect of textile vascular implants and compared them to the structure of a natural artery as a basis for assessing the level of success as an implant. The outcome of this work is expected to encourage future design strategies for developing improved long lasting vascular implants.