Comparative assessment of pedicle morphology of the lumbar spine in various degenerative diseases

Correlation Between Sacral Slope and Pedicle Morphology of the Fourth Lumbar Vertebra in Degenerative Lumbar Spondylolisthesis

STUDY DESIGN

Retrospective Radiographic Review.

OBJECTIVES

The purpose of this study was to investigate the correlation between the sacral slope (SS) and pedicle morphological parameters of the fourth lumbar vertebra in degenerative lumbar spondylolisthesis (DLS).

METHODS

Our study included 134 patients with L4-5 DLS. We used preoperative multi-slice spiral computed tomography to measure a range of pedicle morphological parameters, and the SS and percentage of slip distance (SDP) of the L4 vertebra were measured on preoperative standing neutral lumbar radiography. Patients were divided into three groups based on their degree of SS: the low sacral slope (LSS) group with SS values of <35°, the mean sacral slope (MSS) group with SS of 35°-45°, and the high sacral slope (HSS) group with SS > 45°.

RESULTS

As the SS increased across groups, the pedicles of L4 became longer and thinner and the pedicle camber angle was smaller. The SDP, pedicle length parameters were positively correlated with the SS, while pedicle width, height, and camber angle were negatively correlated with the SS in the three groups.

CONCLUSIONS

SS had an impact on the degree of spondylolisthesis and on pedicle morphological parameters in patients with DLS, with greater slope resulting in greater impact. The progression of DLS occurred due to the increasing forward shear force of the vertebra being greater than the reverse resistance. The pedicle at the slip level adaptively remodeled, becoming slenderer and tilting inward due to the long-term traction of the two opposing forces.

Comparison of L5 pedicle morphology in patients with and without L5 spondylolysis

Only a small number of studies have reported on L5 pedicle morphology in the presence of spondylolisthesis let alone isolated spondylolysis and findings are therefore variable. The aim of this radiographic study was to analyze L5 pedicle morphology in the presence and absence of L5 spondylolysis. The was a retrospective cross-sectional analysis of computed tomographic (CT) imaging. Assessment of the L5 pedicle morphology (height, width, length, transverse angle and screw length) were measured in patients with and without L5 spondylolysis. Pelvic measures including pelvic incidence, sacral anatomic orientation and sacral table angle were recorded. Patients were matched for age and gender. Twenty-three patients with spondylolysis were matched to 46 patients without. The presence of spondylolysis alone did not have a significant influence on either pelvic or pedicle morphologic parameters. Only with the presence of associated spondylolisthesis was there a difference noted with an increase in pedicle length observed. Correlation analysis suggested further morphologic changes may result with increased remodeling. Isolated spondylolysis at L5 appears to have little influence on pedicle morphology in this CT-based analysis. Morphologic changes appear likely to become significant only with associated spondylolisthesis and associated remodeling.

Cervical lateral mass screw length analysis in men versus women

Posterior fixations with lateral mass screws have become popular. The Roy-Camille and the Magerl techniques have been established and screw length was identified as a particularly important element. Sex and ethnicity are significant factors in cervical spine morphology, but few studies have been performed for screw length. We performed measurements using computed tomography (CT) images of adult patients hospitalized for surgery of the cervical spine, with targeted 3D data analysis. The final number of patients was 47 (33 men, 14 women) and 235 vertebrae. With the Roy-Camille technique, the screw length was longest at C3 (men: 13.0 mm ± 1.9 mm, women: 13.0 mm ± 1.9 mm) and smallest at C7 (men: 10.8 mm ± 1.8 mm, women: 9.4 mm ± 1.2 mm). With the Magerl technique, the screw length was smallest at C3 (men: 14.8 mm ± 1.6 mm, women: 14.3 mm ± 1.6 mm) and longest at C7 for men (16.8 mm ± 2.8 mm), and at C6 for women (15.4 mm ± 3.0 mm). To differ from spinal canal or pedicle, cervical lateral mass showed no obvious morphological differences from that of subjects of other ethnicity. The placement of a standard lateral mass screw would not cause complications in Japanese patients, even with the use of devices designed in North America or Europe. However, the anatomical background is essential because it is important to optimize the selection for each patient to avoid complications considering sex and individual differences.

What is the difference in pedicle morphology of the fifth lumbar vertebra between isthmic and degenerative L5-S1 spondylolisthesis? An anatomic study of 328 patients via multi-slice spiral computed tomography

PURPOSE

The purpose of this study was to investigate and determine whether there are differences in L5 pedicles morphology between isthmic and degenerative L5-S1 spondylolisthesis.

METHODS

One hundred and nineteen patients with isthmic spondylolisthesis and 45 patients with degenerative spondylolisthesis at L5-S1 were enrolled in the IS group and DS group, respectively, and 164 lumbar disc herniation patients without spondylolysis or spondylolisthesis were classified into the normal (NL) group. A series of pedicle parameters of the fifth lumbar vertebra, including pedicle length (PL), pedicle width (PW), pedicle screw trajectory length (PSTL), pedicle height (PH), and the pedicle camber angle (PCA), were measured using multi-slice spiral computed tomography (MSCT). The slip distance of the L5 vertebra was measured on radiography, and the percentage of slip was also recorded.

RESULTS

The pedicles of the fifth lumbar vertebra were shorter and wider, and the PCA was larger in the IS group compared to the DS group and NL group. On the contrary, the pedicles in the DS group were elongated and thinner, and the PCA was smaller. The pedicle parameters of PL were significantly positively correlated with the percentage of slip in the DS group, but PW and PCA were negatively correlated with the percentage of slip. There was no correlation between the percentage of slip and L5 pedicle parameters in the IS group.

CONCLUSIONS

The L5 pedicles morphology in L5-S1 isthmic spondylolisthesis shows abduction, shortness, and width, while that in the degenerative spondylolisthesis shows adduction, lengthening, and thinning compared with the normal populations. The morphology changes may be the result of pedicle stress remodelling in the development of spondylolisthesis, which should be taken into consideration when placing at the insertion of pedicle screws.

Thoracic and lumbar spine pedicle morphology in Japanese patients

PURPOSE

Pedicle morphology is important for intraoperative surgical anatomy and to define pedicle screw design and parameters. However, differences of pedicle size according to ethnicity and gender are not well studied. The purpose of this study is to investigate morphological characteristics of the pedicle in Japanese patients for determining adequate screw size and optimal surgical planning.

METHODS

We investigated thoracic and lumbar pedicle morphology in Japanese patients using computed tomography (CT) measurements and analyzed the standard size of pedicles on upper thoracic to lumbar spine CT images in 227 Japanese patients.

RESULTS

Gender had a larger impact on the shape and size of pedicles than racial differences. In the distribution of pedicle width, we calculated the ratio of values less than 4.5 mm, that in females resulted to be over 30% for the Th3-Th9 segment, and particularly high, above 60% at Th4 and Th5.

CONCLUSION

Our measurement analysis showed that pedicle morphological parameters in Japanese patients showed tendency to be smaller to those found in other studies, and particularly in female patients, they were statistically significantly smaller. Adequate transpedicular instrumentation for Japanese patients will require smaller size pedicle-related devices that will match our anatomical findings to achieve safe device placement. In addition, serving ethnically non-homogenous patient population can require further to spinal morphometric for precise device selection.

Use of an inertial measurement unit sensor in pedicle screw placement improves trajectory accuracy

Ascertaining the accuracy of the pedicle screw (PS) trajectories is important as PS malpositioning can cause critical complications. We aimed to determine the angle range over which estimation is unreliable; build a low-cost PS placement support system that uses an inertial measurement unit (IMU) to enable the monitoring of surgical tools and PS trajectories, and determine the situations where IMU support would be most beneficial. In PS insertion experiments, we used cadaver samples that included lumbar porcine spines. Computed tomography images obtained before and after PS insertion were viewed. Offsets between the planned and implanted PS trajectories in the freehand and IMU-assisted groups were analyzed. The PS cortical bone breaches were classified according to the Gertzbein and Robbins criteria (GRC). Added head-down tilted sample experiments were repeated wherein we expected a decreased rostro-caudal rotational accuracy of the PS according to the angle estimation ability results. Evaluation of the PS trajectory accuracy revealed no significant advantage of IMU-assisted rostro-caudal rotational accuracy versus freehand accuracy. According to the GRC, IMU assistance significantly increased the rate of clinically acceptable PS positions (RoCA) than the freehand technique. In the head-down tilted sample experiments, IMU assist provided increased accuracies with both rostro-caudal and medial rotational techniques when compared with the freehand technique. In the freehand group, RoCA was significantly decreased in samples with rostral tilting relative to that in the samples without. However, In the IMU-assisted group, no significant difference in RoCA between the samples with and without head-down tilting was observed. Even when the planned PS medial and/or rostro-caudal rotational angle was relatively large and difficult to reproduce manually, IMU-support helped maintain the PS trajectory accuracy and positioning safety. IMU assist in PS placement was more beneficial, especially for larger rostro-caudal and/or medial rotational pedicle angles.

Pedicle Morphometry Variations in Individuals with Degenerative Lumbar Spinal Stenosis

The aim of this study was to compare pedicle dimensions in degenerative lumbar spinal stenosis (DLSS) with those in the general population. A retrospective computerized tomography (CT) study for lumbar vertebrae (L1 to L5) from two sample populations was used. The first included 165 participants with symptomatic DLSS (age range: 40-88 years, sex ratio: 80 M/85 F), and the second had 180 individuals from the general population (age range: 40-99 years, sex ratio: 90 M/90 F). Both males and females in the stenosis group manifested significantly greater pedicle width than the control group at all lumbar levels (P < 0.05). In addition, pedicle heights for stenosis females were remarkably smaller on L4 and L5 levels compared to their counterparts in the control group (P < 0.001). Males have larger pedicles than females for all lumbar levels (P < 0.001). Age and BMI did not demonstrate significant association with pedicle dimensions. Our outcomes indicate that individuals with DLSS have larger pedicle widths than the control group. More so, pedicle dimensions are gender-dependent but independent of age and BMI.

Inserting pedicle screws in lumbar spondylolisthesis - The easy bone conserving way

BACKGROUND

Pedicle screw fixation in high grade lumbar listhetic vertebral body has been nightmare for Orthopaedic and spine surgeons. This is because of abnormally positioned listhetic pedicles and non-visualization of pedicle in conventional image intensifier (C-Arm). This results into increased surgical time, more blood loss, radiation exposure and more chances of infection. To overcome this problem, we have devised a new Technique of putting of pedicle screw fixation in listhetic vertebrae.

METHODS

Total 20 patients of average age of 42 (25-56) were included during 2010 to 2015. Listhesis was classified according to etiology, Meyerding grading and DeWald modification of Newman criteria used for assessment of severity for spondylolisthesis on standing X-ray lumbosacral spine. Patients satisfying following criteria were considered for surgery. Age more than 20 years, with single involvement of either L4-5/L5-S1, high grade spondylolisthesis (≥ 50% Meyerding grade), unresolving radiculopathy, cauda equina syndrome or pain with and without instability not relieved by 6 months of conservative treatment. According to Meyerding radiographic grading system,10 patients were of type II and 8 of type III and 2 of type IV. Treatment given was pedicle screw fixation, reduction of listhesis vertebra and spinal fusion with our technique. PLT was done in 10 cases and transforaminal lumbar interbody fusion (TLIF) in the other 10 cases.

RESULTS

Mean follow up duration was 2 years (range 1.3-3.3 year). The average preoperative LBP VAS of low back pain were 6.7 and average LP VAS for leg pain 5.7. Postoperatively at final follow up there was reduction of LBP VAS to 2.2 and LP VAS to 0.5. There was rapid reduction in their LBP VAS in first two visits at 4 weeks and in LP VAS in first three visits at 8 weeks. The pain-free walking distance improved significantly. The average pre-operative ODI score was 51.4, improved to 18.6 postoperatively. There was no difference in above scores between PLT and TLIF.

CONCLUSION

Our surgical technique used for high grade spondylolisthesis is safe, cost-effective, bone-preserving, reliable, and reproducible for high grade Lumber spondylolisthesis.

Lumbosacral pedicle screw placement using a fluoroscopic pedicle axis view and a cannulated tapping device

Background

Pedicle screw insertions are commonly used for posterior fixation to treat various spine disorders. However, the misplacement of pedicle screws can lead to disastrous complications. Inaccurate pedicle screw placement is relatively common even when placement is performed under fluoroscopic control. In order to improve the accuracy of the screw placement, we applied a technique using guide wires and a cannulated tapping device with the assistance of a fluoroscopic pedicle axis view.

Methods

From 2006 to 2011, 854 pedicle screws were placed in 176 patients in lumbosacral spinal fusion surgeries. The accuracy of screw placement was evaluated using postoperative reconstructed computed tomography images. Screw misplacement was classified as minor (cortical perforation <3 mm), moderate (cortical perforation 3–6 mm), or severe (cortical perforation >6 mm). Using logistic regression analysis, we also investigated the potential risk factors associated with screw misplacement.

Results

Pedicle screw misplacement was observed in 37 screws (4.3 %) in 34 patients. In the sub-classification analysis, 28 screws (3.3 %) were determined to be minor perforations, 7 screws (0.8 %) were considered to be moderate perforations, and 2 screws (0.2 %) was judged to be a severe perforation (cortical perforation >6 mm). None of the 28 screws that were considered to be minor perforations were associated with any significant symptoms in the patients. However, 2 of the 9 screws that were determined to be moderate or severe perforations caused neurological symptoms (1 of which required revision). No significant differences were observed in the incidence of screw misplacement among the vertebral levels. Significant risk factors for screw misplacement were obesity and degenerative scoliosis. The odds ratios of these significant risk factors were 3.593 (95 % confidence interval (CI), 1.061–12.175) for obesity and 8.893 for degenerative scoliosis (95 % CI, 1.200–76.220).

Conclusions

A modified fluoroscopic technique using a pedicle axis view and a cannulated tapping instrument can achieve safe and accurate pedicle screw placement. In addition, obesity and degenerative scoliosis were identified as significant risk factors for screw misplacement.

Morphological characteristics of cervical spine in patients with athetoid cerebral palsy and the accuracy of pedicle screw placement

STUDY DESIGN

A retrospective study.

OBJECTIVE

To investigate the morphology of the cervical spine in patients with athetoid cerebral palsy (CP), and to evaluate its relationship with the breach of cervical pedicle screws.

SUMMARY OF BACKGROUND DATA

Cervical pedicle screws have been increasingly used in surgery for patients with CP, but screw misplacement is not uncommon. Although the altered morphology of the cervical spine in patients with CP may result in this high breach rate, few studies have examined the cervical pedicle profile.

METHODS

We retrospectively analyzed 31 patients with cervical myelopathy with CP, as well as 30 patients with cervical spondylotic myelopathy (CSM), who underwent posterior decompression surgery. The pedicle outer diameter, inner diameter, transverse angle and lateral mass deformity were investigated by obtaining preoperative computed tomographic scans. The accuracy of the placement of 56 pedicle screws used in fusion surgery for 12 patients with CP was also analyzed using postoperative computed tomographic scans.

RESULTS

The outer diameter of the pedicle in CP was in the range from 3.3 to 9.6 mm, and was larger than that in CSM at all cervical levels except for C7. Pedicle sclerosis was more frequently observed in CP than in CSM (23% vs. 7.3%, P < 0.001). The transverse angle at C3 and C4 was larger, and lateral mass deformity was more frequently observed in CP than in CSM. The critical breach of pedicle screws in CP was found in 29%. A multivariate analysis revealed that pedicle sclerosis was associated with an increased risk of breach (odds ratio: 6.3; 95% confidence interval: 1.03-39.0; P = 0.047).

CONCLUSION

The pedicle diameter in patients with CP was relatively large, but pedicle sclerosis, a wide transverse angle and lateral mass deformity were frequently observed. Sclerotic pedicles were associated with a higher risk of critical breach.

LEVEL OF EVIDENCE

N/A.

Morphometric analysis using multiplanar reconstructed CT of the lumbar pedicle in patients with degenerative lumbar scoliosis characterized by a Cobb angle of 30° or greater

Object

Although the anatomy of the thoracic pedicle in adolescent idiopathic scoliosis is well known, that of the lumbar pedicle in degenerative lumbar scoliosis is not. The morphometric differences between the pedicles on the concave and convex sides can result in an increased risk of malpositioned pedicle screws. The purpose of this study was to analyze the lumbar pedicle morphology in degenerative lumbar scoliosis using multiplanar reconstructed CT.

Methods

The study group comprised 16 consecutive patients (1 man and 15 women, mean age 70.9 ± 4.5 years) with degenerative lumbar scoliosis characterized by a Cobb angle of at least 30° who underwent preoperative helical CT scans. The CT data in DICOM format were reconstructed, and the following parameters were measured for each pedicle inside the curves: the inner cortical transverse pedicle width (TPWi) and outer cortical transverse pedicle width (TPWo) and axial angle, all on an axial plane, and the inner cortical minimum pedicle diameter (MPDi) and outer cortical minimum pedicle diameter (MPDo) and cephalocaudal inclination of the pedicle, all on the plane perpendicular to the pedicle axis. The cortical thickness and cortical ratio of the pedicles on the axial plane and the plane perpendicular to the pedicle axis were calculated. Data were obtained for a total of 124 pedicles; L-1, 26 pedicles in 13 patients; L-2, 32 pedicles in 16 patients; L-3, 32 pedicles in 16 patients; L-4, 28 pedicles in 14 patients; and L-5, 6 pedicles in 3 patients.

Results

Among the target vertebrae, the TPWi, MPDi, and MPDo were significantly smaller and the axial angle was significantly larger on the concave side than on the convex side (TPWi, 6.37 vs 6.70 mm, p < 0.01; MPDi, 5.15 vs 5.67 mm, p < 0.01; MPDo, 7.91 vs 8.37 mm, p < 0.05; axial angle, 11.79° vs 10.56°, p < 0.01). The cortical ratio of the pedicles was larger on the concave side than on the convex side (on the axial plane, 0.29 vs 0.26, p < 0.05; on the plane perpendicular to the pedicle axis, 0.36 vs 0.32, p < 0.01). These differences were most evident at L-4.

Conclusions

This study demonstrated lumbar pedicle asymmetry in degenerative lumbar scoliosis. The authors speculate that these asymmetrical changes were attributed to the remodeling caused by axial load imbalance and the limited space available for pedicles on the concave side. On the concave side, because of the narrower pedicle diameter and larger axial angle, surgeons should carefully determine screw size and direction when inserting pedicle screws to prevent possible pedicle wall breakage and neural damage.

Analysis of lumbar pedicle morphology in degenerative spines using multiplanar reconstruction computed tomography: what can be the reliable index for optimal pedicle screw diameter?

PURPOSE

The measurement of transverse pedicle width is still recommended for selecting a screw diameter despite being weakly correlated with the minimum pedicle diameter, except in the upper lumbar spine. The purpose of this study was to reveal the difference between the minimum pedicle diameter and conventional transverse or sagittal pedicle width in degenerative lumbar spines.

METHODS

A total of 50 patients with degenerative lumbar disorders without spondylolysis or lumbar scoliosis of >10° who preoperatively underwent helical CT scans were included. The DICOM data of the scans were reconstructed by imaging software, and the transverse pedicle width (TPW), sagittal pedicle width (SPW), minimum pedicle diameter (MPD), and the cephalocaudal inclination of the pedicles were measured.

RESULTS

The mean TPW/SPW/MPD values were 5.46/11.89/5.09 mm at L1, 5.76/10.44/5.39 mm at L2, 7.25/10.23/6.52 mm at L3, 9.01/9.36/6.83 mm at L4, and 12.86/8.95/7.36 mm at L5. There were significant differences between the TPW and MPD at L3, L4, and L5 (p < 0.01) and between the SPW and MPD at all levels (p < 0.01).

CONCLUSIONS

The MPD was significantly smaller than the TPW and SPW at L3, L4, and L5. The actual measurements of the TPW were not appropriate for use as a direct index for the optimal pedicle screw diameter at these levels. Surgeons should be careful in determining pedicle screw diameter based on plain CT scans especially in the lower lumbar spine.

Assessment of the morpho-densitometric parameters of the lumbar pedicles in osteoporotic and control women undergoing routine abdominal MDCT examinations

In transpedicular surgical operations, the pedicle should be safely penetrated. In this study, we hypothesize that morpho-densitometric data describing the physical status of the pedicle isthmus in osteoporotic versus control postmenopausal women may be generated using high-resolution three-dimensional images obtained from routine abdominal multidetector computed tomography (MDCT) scans. Thus, 32 osteoporotic and 38 postmenopausal control women had a routine abdominal scan using a 16-row CT scanner. Images of the pedicle isthmus of the L2-L4 vertebrae were generated at the plane that was vertical to the pedicle axis. Several indices were calculated based on the measurements of outer and inner dimension of the pedicle isthmus, pedicle isthmus area, and pedicle isthmus endosteal area. The mean Hounsfield unit number within the isthmus endosteal area (HU(IEA)) and the trabecular portion of the vertebral body (HU(VERT)) were measured. All subjects had a dual X-ray absorptiometry scan (DXA) in the lumbar spine. Most of the indices calculated showed statistically significant differences between osteoporotic and control women. HU(IEA) was significantly correlated to T-score (r = 0.580, P < 0.0001). HU(IEA) showed the best discriminatory ability between the two groups (area under ROC curve, 0.840). Routine abdominal MDCT can be used to assess the morpho-densitometric characteristics of the lumbar pedicle isthmus and differentiate osteoporotic from control postmenopausal women.

In vivo three-dimensional morphometric analysis of the lumbar pedicle isthmus

STUDY DESIGN

In vivo noninvasive study.

OBJECTIVE

To properly quantify pedicle anatomic parameters, using subject-based CT three-dimensional models and compare the data from 2-dimensional transverse-CT images.

SUMMARY OF BACKGROUND DATA

Accurate measurement of morphometric parameters of pedicle isthmus is important for transpedicular procedures. Anatomically, the lumbar pedicle is known to be elliptical cross-sectionally and slightly inclined in the vertical plane in the lower lumbar levels. Therefore, measurement of the pedicle isthmus may be overestimated when transverse images are used. More accurate measurement of the 3-dimensional geometry of the pedicle is therefore needed. To the best of our knowledge, 3-dimensional geometry of the pedicle has not been reported as the literature values are based on 2-dimensional image data.

METHODS

In vivo measurements of the lumbar pedicle isthmus were performed on the 3-dimensional subject-based CT models, using custom-developed software in 89 volunteers.

RESULTS

The least axis of pedicle, the longest axis of pedicle and the transverse plane width were largest at L5 in both genders. The isthmus angle declined in the lower levels. The ratio of the transverse plane width to the least axis of pedicle was largest at L5.

CONCLUSION

Our results showed that the least axis of pedicle, the longest axis of pedicle and the transverse plane width peaked at L5, and the transverse plane width became approximately twice as long in the lower levels compared to the upper levels. The ratio of the transverse plane width to the least axis of pedicle increased by about 40% at L5. These findings highlight the fact that measuring the isthmus width from CT transverse images leads to overestimation, especially in the lower lumbar spine. Therefore, a 3-dimensional inclination of the least axis of the pedicle should be taken into account for the determination of the pedicle diameter in the lower lumbar vertebrae.