Assessment of the relationship between size, shape and volume of the sella turcica in class II and III patients prior to orthognathic surgery

Potential role of the sella turcica X-ray imaging aspects for sex estimation in the field of forensic anthropology: a systematic review and meta-analysis

Several studies have evaluated the parameters of normality of the sella turcica (ST), which is important to face different craniofacial syndromes that may affect this structure. Therefore, this research summarized the scientific evidence on the role of ST in the sex estimation of non-syndromic individuals. The research protocol was registered (Prospective International Registry of Systematic Reviews # CRD42021256469), followed by an electronic search in six databases (PubMed, LILACS, Web of Science, Scopus, EMBASE, and LIVIVO) and gray literature (Google Scholar and OpenGrey). Meta-analysis of linear (width, length, height, and diameter) and volumetric measurements, in addition to an assessment of risk of bias (RoB) and certainty of evidence, were performed. After the screening of 986 articles, 13 were evaluated by meta-analysis (1 307 males and 1 231 females). In subgroup analysis, females had lower values for width (lateral radiograph; -0.67 mm; P = 0.040), length (computed tomography; -0.23 mm; P = 0.020), and diameter (computed tomography; -0.27 mm; P < 0.001) compared to males. There was no statistically significant difference regarding height (P = 0.95), area (P = 0.72), and volume (P = 0.21). Most studies exhibited moderate RoB, and the certainty of evidence of the outcomes was very low. In this review, significant differences were observed between the sexes for the length and diameter of the ST; however, the heterogeneity of the studies must be considered.

Key points

Studies from different geographic regions evaluated the morphology of ST according to sex and showed this anatomical structure as an important indicator of dimorphism.Meta-analysis showed shorter ST length and diameter in women.Subgroup analysis found lower ST width in women based on lateral skull radiographs.Subgroup analysis found smaller lengths and diameters in women based on CT scans.

Comparison of the transverse cranial base dimension in different craniofacial skeletal relationships: A cone-beam computed tomography study

Background/purpose

In comparing the cranial base's size, most cephalometric studies focused on the length and angle in the anteroposterior direction. However, investigating the anterior, middle, and posterior cranial base's transverse dimensions is challenging. This study aimed to investigate the transverse dimensions of the cranial base in different craniofacial skeletal patterns and sexes using cone-beam computed tomography (CBCT).

Materials and methods

A total of 210 adults (105 males and 105 females), including three different skeletal relationships, were included in the study. The cranial base dimensions were measured on a three-dimensional image structure rendered by CBCT. Statistical methods included the Kappa statistic for analysis of consistency and reproducibility and the independent t-test for differences in cranial base dimensions between sexes. A general linear model (GLM) was used to compare the transverse size of the cranial base among skeletal Class I, II, and III groups. The Pearson correlation coefficient explored the correlation among the cranial base dimensions.

Results

The cranial base dimensions did not differ significantly between skeletal Class I, II, and III. The more prominent cranial base size was found in males than females, except for the crista galli length (CGL) and cribriform ethmoid plate width (CEPW). The cranial base dimensions did not differ significantly between different skeletal relationships. Most dimensions have significant correlations in the middle and the posterior cranial base.

Conclusion

The cranial base's transverse dimensions in Taiwanese adults show no significant differences between craniofacial skeletal relationships. In the middle and posterior cranial base, transverse measurements reveal significant sexual dimorphism.

Morphology of the Sella Turcica: A Meta-Analysis Based on the Results of 18,364 Patients

BACKGROUND

This meta-analysis aimed to present data on the sella turcica (ST) morphology and variations. Furthermore, a detailed morphometric analysis of the ST was conducted.

METHODS

Major online databases such as PubMed, Scopus, Embase, Web of Science, and the Cochrane Library were searched through. The overall search process was conducted in three stages.

RESULTS

This meta-analysis was based on the results of 18,364 patients and demonstrates the most up-to-date and relevant data regarding the morphology of the ST in the available literature. Four classification methods of the ST shape can be distinguished, in which the most commonly occurring variants are the normal ST (55.56%), the U-shaped ST (73.58%), the circular type of ST (42.29%), and non-bridging ST (55.64%). The overall midpoint height of the ST was 6.59 mm (SE = 0.13). The overall length of the ST was 9.06 mm (SE = 0.15). The overall volume of the ST was 845.80 mm3 (SE = 288.92). Four main classification methods of ST morphology can be distinguished in the available literature. Various morphometric characteristics of the ST may be applied in clinical practice to evaluate its shape, dimensions, and normal or pathological variants.

Deep learning-based automatic sella turcica segmentation and morphology measurement in X-ray images

BACKGROUND

Although the morphological changes of sella turcica have been drawing increasing attention, the acquirement of linear parameters of sella turcica relies on manual measurement. Manual measurement is laborious, time-consuming, and may introduce subjective bias. This paper aims to develop and evaluate a deep learning-based model for automatic segmentation and measurement of sella turcica in cephalometric radiographs.

METHODS

1129 images were used to develop a deep learning-based segmentation network for automatic sella turcica segmentation. Besides, 50 images were used to test the generalization ability of the model. The performance of the segmented network was evaluated by the dice coefficient. Images in the test datasets were segmented by the trained segmentation network, and the segmentation results were saved in binary images. Then the extremum points and corner points were detected by calling the function in the OpenCV library to obtain the coordinates of the four landmarks of the sella turcica. Finally, the length, diameter, and depth of the sella turcica can be obtained by calculating the distance between the two points and the distance from the point to the straight line. Meanwhile, images were measured manually using Digimizer. Intraclass correlation coefficients (ICCs) and Bland-Altman plots were used to analyze the consistency between automatic and manual measurements to evaluate the reliability of the proposed methodology.

RESULTS

The dice coefficient of the segmentation network is 92.84%. For the measurement of sella turcica, there is excellent agreement between the automatic measurement and the manual measurement. In Test1, the ICCs of length, diameter and depth are 0.954, 0.953, and 0.912, respectively. In Test2, ICCs of length, diameter and depth are 0.906, 0.921, and 0.915, respectively. In addition, Bland-Altman plots showed the excellent reliability of the automated measurement method, with the majority measurements differences falling within ± 1.96 SDs intervals around the mean difference and no bias was apparent.

CONCLUSIONS

Our experimental results indicated that the proposed methodology could complete the automatic segmentation of the sella turcica efficiently, and reliably predict the length, diameter, and depth of the sella turcica. Moreover, the proposed method has generalization ability according to its excellent performance on Test2.

Sella turcica dimensions and maxillary growth in patients with unilateral cleft lip and palate

OBJECTIVES

We aimed to investigate associations between sella turcica dimensions and maxillary growth in children with unilateral cleft lip and palate (UCLP).

METHODS

Forty-nine patients with non-syndromic UCLP, prior to secondary alveolar bone-grafting, were included. The outcomes measured were sella turcica and maxillary cephalometric measurements, and scores representing dental arch relationships derived from dental casts. On lateral cephalograms, sella width, height, and area were measured, as well as maxillary length, height, protrusion, and inclination. Dental arch relationships were measured using the modified Huddart/Bodenham (MHB) scoring system, and translated GOSLON yardstick score. Multiple linear regression was used to assess associations between sella turcica measurements and either cephalometric parameters or MHB/GOSLON scores, including age and sex as covariables.

RESULTS

No significant associations were found between sella turcica dimensions and dental arch relationships. For cephalometric measurements, sella height and area were associated with basal maxillary length, alveolar maxillary length, and anterior maxillary height.

CONCLUSIONS

Sella height and area seem to be predictors for both maxillary length and height as assessed cephalometrically, in a sample of patients with non-syndromic UCLP.

Relationship between palatally impacted canines and dimensions and morphology of sella turcica: A cone-beam computed tomography study

INTRODUCTION

This study aimed to analyze the association of unilateral and bilateral palatal canine impaction with the dimensions and morphology of sella turcica from 3-dimensional cone-beam computed tomography (CBCT) images.

METHODS

CBCT images of patients with bilateral (BPI) (n = 12; 9 female 3 male; 20.75 ± 5.88 years) and unilateral (UPI) (n = 35; 22 female 13 male; 19.28 ± 5.57 years) palatally impacted canines were compared with a control group (n = 56; 34 female 22 male; 20.82 ± 4.88 years). Linear measurements regarding sella turcica were made, and its morphologic variations were categorized. Two group comparisons were made with the Student t test or Mann-Whitney U-test, whereas one-way analysis of variance or Kruskal-Wallis tests were used for multiple group comparisons. Categorical variables were compared using the chi-square or Fisher exact test as appropriate. The binary logistic regression analyses and correlations using Spearman or Pearson correlation analyses were used to determine associations between variables (P <0.05).

RESULTS

Sella diameter was significantly smaller in the BPI group compared to UPI and control groups. There was a significant association between sella diameter and BPI when compared with the control group (χ2[1] = 9.150; P = 0.008). There were no significant differences between groups in the distribution of sella turcica morphology.

CONCLUSIONS

Despite the similar genetic origin of the sella turcica region and teeth, the association of palatal canine impaction with dimensions and morphology of sella turcica was weak. Both local and genetic factors might contribute to the ectopic position of the canine.

The Comparative Evaluation of the Morphology and Dimensions of the Sella Turcica in Skeletal Class III Patients and Patients With Unilateral Cleft Lip and Palate in Post-Pubertal Age Group

Background

The clinical features of unilateral cleft patients have great similarity to class III patients, viz., ANB <2° and Wits appraisal <-3 mm. In this study, we determined the frequency of various shapes of the sella in cleft and class III patients. We also measured the dimensions of the sella turcica in the aforementioned groups. Studying the morphology and dimensions of the sella in different groups can help us to understand the role of the cranial base in the development of malocclusion.

Material and methods

The study is composed of 46 patients, divided into two groups with an age range of 14 to 21 years. The linear dimensions of the sella were measured, and the shape of the sella was determined. Comparison was done between the two groups using Student’s t-test.

Result

When the two groups were compared, length was found to be similar in both groups, but depth and diameter were greater in the class III group. An abnormal shape of the sella was found predominantly in both class III and cleft cases. The normal morphology accounted for only 13.04% of all the cleft patients, whereas 39.13% of the class III cases exhibited a normal shape of the sella. Sella turcica bridging was seen in 30.43% of cleft patients as opposed to 21.73% of class III patients exhibiting the bridging.

Conclusion

With the finding that 74% of the subjects exhibited abnormal morphology of the sella, confirming that it can be one of the factors for malocclusion must be given more consideration.

Morphology of Sella Turcica and Bridging Prevalence Correlated with Sex and Craniofacial Skeletal Pattern in Eastern Asia Population: CBCT Study

Purpose

Sella turcica bridging (STB) refers to a rare anatomical variation formed by the ossification of the ligament between the anterior and posterior clinoid processes. The presence of the STB was significantly correlated with craniofacial skeleton classification and a higher prevalence rate in skeletal Class III. The current study is aimed at investigating the dimensions of sella turcica and the prevalence of STB in different sexes and on the three craniofacial skeletal patterns using cone beam computed tomography (CBCT).

Materials and Methods

A total of 159 adults (66 males and 93 females), including 3 different craniofacial skeletal patterns (skeletal Classes I, II, and III), were included in the study. The sella turcica dimensions and the prevalence of STB were calculated. An independent t-test and generalized linear model were used to compare the differences in the sella turcica dimensions and the skeletal relations. The Spearman rank correlation coefficient was used to analyze the correlations between sella turcica dimensions and skeletal relation.

Results

The sella length (SL) was 11.05 ± 1.80 mm for males and 10.77 ± 1.56 mm for females. The anterior clinoid distance (ACD) which was measured for the anterior width of sella turcica showed 25.83 ± 2.04 mm and 24.04 ± 2.28 mm for males and females, respectively (p < 0.0001). The overall percentage of complete bridging and partial bridging was 6.6% and 56.9%, respectively. Complete bridges were more common in males (males: 9.1%, females: 4.8%), and partial bridges were more frequent in females (males: 49.2%, females: 62.4%). Both sexes differed with respect to sella turcica dimensions. Moreover, males had a significantly larger ACD, posterior clinoid distance (PCD), and diameter of sella turcica (DST), on both sides, relative to females.

Conclusion

The prevalence rate of complete STB in the Taiwanese population was 6.6%. Significant differences between sexes were found in sella turcica dimensions. The prevalence rates of STB as well as the sella turcica dimensions did not significantly differ between different craniofacial skeletal patterns (skeletal Classes I, II, and III).

Three-dimensional assessment of the sella turcica: comparison between cleft lip and palate patients and skeletal malocclusion classes

PURPOSE

The main aim of the present study was to investigate the dimensions and morphological appearance of the sella turcica in cleft lip and palate patients using cone-beam computed tomography (CBCT) images, compared to non-cleft individuals.

METHODS

CBCT images of 40 (20 females and 20 males) cleft lip and palate patients and 60 (27 males and 33 females) non-cleft individuals were assessed, retrospectively. The linear dimensions (depth, diameter and length) of the sella turcica and inter-clinoid distance were measured. Sella turcica shapes were examined in the cleft lip and palate patients and non-cleft individuals. Non-cleft individuals were divided into skeletal malocclusion classes. All variables were analyzed using the Kruskal-Wallis test, Mann-Whitney U tests and Chi-square test.

RESULTS

No significant difference was observed between individuals with and without cleft in the linear dimensions (depth, diameter and length) of the sella turcica (p > 0.05). However, a significant difference was found in the inter-clinoid distance between patients with cleft and non-cleft individuals (p < 0.05). Comparison of the sella turcica shape between skeletal malocclusion classes and patients with cleft showed significant differences (p < 0.05).

CONCLUSIONS

No significant difference was determined in the depth, diameter, or length of the sella turcica in cleft patients when compared with non-cleft individuals. The inter-clinoid distance was lower in cleft patients than in non-cleft individuals, and this difference was statistically significant.