A GH57 family amylopullulanase from deep-sea Thermococcus siculi: expression of the gene and characterization of the recombinant enzyme

Expression optimization and characterization of a novel amylopullulanase from the thermophilic Cohnella sp. A01

Amylopullulanase (EC. 3.2.1.41/1) is an enzyme that hydrolyzes starch and pullulan, capable of breaking (4 → 1)-α and (6 → 1)-α bonds in starch. Here, the Amy1136 gene (2166 base pairs) from the thermophilic bacterium Cohnella sp. A01 was cloned into the expression vector pET-26b(+) and expressed in Escherichia coli BL21. The enzyme was purified using heat shock at 90 °C for 15 min. The expression optimization of Amy1136 was performed using Plackett-Burman and Box-Behnken design as follows: temperature of 26.7 °C, rotational speed of 180 rpm, and bacterial population of 1.25. The Amy1136 displayed the highest activity at a temperature of 50 °C (on pullulan) and a pH of 8.0 (on starch) and, also exhibited stability at high temperatures (90 °C) and over a range of pH values. Ag+ significantly increased enzyme activity, while Co2+ completely inhibited amylase activity. The enzyme was found to be calcium-independent. The kinetic parameters Km, Vmax, kcat, and kcat/Km for amylase activity were 2.4 mg/mL, 38.650 μmol min-1 mg-1, 38.1129 S-1, and 0.09269 S-1mg mL-1, respectively, and for pullulanase activity were 173.1 mg/mL, 59.337 μmol min-1 mg-1, 1.586 S-1, and 1.78338 S-1mg mL-1, respectively. The thermodynamic parameters Kin, t1/2, Ea#, ΔH#, ΔG# and ΔS# were calculated equal to 0.20 × 10-2 (m-1), 462.09 (min), 16.87 (kJ/mol), 14.18 (kJ/mol), 47.34 (kJ/mol) and 102.60 (Jmol K-1), respectively. The stability of Amy1136 under high temperature, acidic and alkaline pH, surfactants, organic solvents, and calcium independence, suggests its suitability for industrial applications.

Simultaneously improving the activity and thermostability of hyperthermophillic pullulanase by modifying the active-site tunnel and surface lysine

Pullulanases are important starch-debranching enzymes that mainly hydrolyze the α-1,6-glycosidic linkages in pullulan, starch, and oligosaccharides. Nevertheless, their practical applications are constrained because of their poor activity and low thermostability. Moreover, the trade-off between activity and thermostability makes it challenging to simultaneously improve them. In this study, an engineered pullulanase was developed through reshaping the active-site tunnel and engineering the surface lysine residues using the pullulanase from Pyrococcus yayanosii CH1 (PulPY2). The specific activity of the engineered pullulanase was increased 3.1-fold, and thermostability was enhanced 1.8-fold. Moreover, the engineered pullulanase exhibited 11.4-fold improvement in catalytic efficiency (kcat/Km). Molecular dynamics simulations demonstrated an anti-correlated movement around the entrance of active-site tunnel and stronger interactions between the surface residues in the engineered pullulanase, which would be beneficial to the activity and thermostability improvement, respectively. The strategies used in this study and dynamic evidence for insight into enzyme performance improvement may provide guidance for the activity and thermostability engineering of other enzymes.

Engineering hyperthermophilic pullulanase to efficiently utilize corn starch for production of maltooligosaccharides and glucose

Pullulanase is a starch-debranching enzyme that hydrolyzes side chain of starch, oligosaccharides and pullulan. Nevertheless, the limited activities of pullulanases constrain their practical application. Herein, the hyperthermophilic type II pullulanase from Pyrococcus yayanosii CH1 (PulPY2) was evolved by synergistically engineering the substrate-binding pocket and active-site lids. The resulting mutant PulPY2-M2 exhibited 5-fold improvement in catalytic efficiency (kcat/Km) compared to that of PulPY2. PulPY2-M2 was utilized to develop a one-pot reaction system for efficient production of maltooligosaccharides. The maltooligosaccharides conversion rate of PulPY2-M2 reached 96.1%, which was increased by 5.4% compared to that of PulPY2. Furthermore, when employed for glucose production, the glucose productivity of PulPY2-M2 was 25.4% and 43.5% higher than that of PulPY2 and the traditional method, respectively. These significant improvements in maltooligosaccharides and glucose production and the efficient utilization of corn starch demonstrated the potential of the engineered PulPY2-M2 in starch sugar industry.

Isolation, characterization, and cloning of thermostable pullulanase from Geobacillus stearothermophilus ADM-11

This study aimed to identify thermo-stable pullulanase-producing bacteria in soil samples of potato fields and food-producing companies. Pullulan agar medium was used to screen 17 bacterial strains, which were incubated at 65 °C. The isolate with the maximum activity (375U/ml) was selected and recognized as Geobacillus stearothermophilus ADM-11 by morphological, biochemical characterization, and 16S rRNA gene sequencing. The pullulanase production required optimum pH of 7 and temperature of 75 °C, respectively. The electrophoresis of purified pullulanase on SDS-polyacrylamide gel revealed 83 kDa of a molecular weight that is active at 70 °C and pH 7.0. It was also stable at 90 °C but its activity was decreased by 10 % at 100 °C. The action of pullulanase was increased and stabilized by Ca+2 among the metal ions. Beta and gamma-cyclodextrins inhibited enzyme activity while ethylenediaminetetraacetate (EDTA) and phenylmethylsulfonyl fluoride (PMSF) have no significant effect on pullulanase activity. A full-length pullulanase gene was amplified from G. stearothermophilus ADM-11 using genomic DNA 2.1 kb of PCR product which was then purified and ligated in the cloning vector pTZ57R using the TA cloning technique. Colony PCR confirmed cloning on the positive clones after the pullulanase gene had been ligated and subjected to restriction digestion. It revealed 74 % similarity with the reported pullulanase gene from Geobacillus sp. 44C. The thermostability of pullulanase and its ability to degrade raw pullulan may therefore have wide-scale applications in starch processing, the detergent business, and new biotechnological applications.

Improved Stability and Hydrolysates of Hyperthermophilic GH57 Type II Pullulanase from the Deep-Sea Archaeon Thermococcus siculi HJ21 by Truncation

Pullulanase (EC 3.2.1.41) belongs to the amylase family and is often used alone or in combination with other amylases in the industrial production of starch-based products. This enzyme is often required in industrial production because of its better stability. We here truncated the pullulanase gene from the deep-sea hydrothermal anaerobic archaeon Thermococcus siculi HJ21 and obtained Pul-HJΔ782, which is a member of the α-amylase family GH57. The results revealed that the optimum temperature for Pul-HJΔ782 was 100 °C, and its thermostability at 100 °C improved after truncation. Less than 15% of its enzyme activity was lost after 1 h of incubation at 100 °C, and 57% activity remained after 5 h of treatment. Truncation significantly improved the overall pH tolerance range of Pul-HJΔ782, and its stability in the pH range 4–8 was over 80% relative activity from an average of 60%. The sequence and structural model of Pul-HJΔ782 was analyzed, and its instability index was reduced significantly. Furthermore, the hydrolysates of the truncated and wild-type pullulanase were analyzed, and the enzymatic digestion efficiency of the truncated Pul-HJΔ782 was higher.

Modulating the pH profile of the pullulanase from Pyrococcus yayanosii CH1 by synergistically engineering the active center and surface

A preferable pullulanase with high thermostability and catalytic activity at pH 4.5-5 is desired to match with glucoamylase in the starch-saccharification process. However, most of them exhibit low activity under such low pH conditions. Here, the optimal pH of the hyperthermostable pullulanase from Pyrococcus yayanosii (Pul_PY2) was successfully shifted from 6.4 to 5 with a 2-fold increase in the specific activity based on synergistic engineering of the active center and surface. Synergistic engineering was performed by introducing histidine within 6 Å of the active sites, and by enhancing negative charges on the enzymatic surface. Two single-site mutants of Pul_PY2-Q13H and Pul_PY2-I25E with higher hydrolytic activity were obtained, the optimal pH of which was shifted to pH 5 and 5.4, respectively; the combined mutant Pul_PY2-Q13H/I25E exhibited the optimal pH of 5, 3.2-fold increasing catalytic efficiency at pH 5, and high thermostability compared to Pul_PY2. These results not only obtained an applicable pullulanase for industrial application, but also provided a strategy for shifting the optimal pH of the enzyme based on synergistic engineering of the active center and surface.

A Hyperthermostable Type II Pullulanase from a Deep-Sea Microorganism Pyrococcus yayanosii CH1

Pullulanase is a commonly used debranching enzyme in the starch processing industry. Because the starch liquefaction process requires high temperature, a thermostable pullulanase is desired. Here, a novel hyperthermostable type II pullulanase gene (pul_PY) was cloned from Pyrococcus yayanosii CH1, isolated from a deep-sea hydrothermal site. Pul_PY was optimally active at pH 6.6 and 95 °C, retaining more than 50% activity after incubation at 95 °C for 10 h. The thermostability was significantly higher than those of most pullulanases reported previously. To further improve its activity and thermostability, the N-terminal and C-terminal domains of Pul_PY were truncated. The optimum temperature of the combined truncation mutant Δ28N + Δ791C increased to 100 °C with a specific activity of 32.18 U/mg, which was six times higher than that of wild-type Pul_PY. Pul_PY and the truncation mutant enzyme could realize the combined use of pullulanase with α-amylase during the starch liquefaction process to improve hydrolysis efficiency.

Industrially produced pullulanases with thermostability: Discovery, engineering, and heterologous expression

Pullulanases (EC 3.2.1.41) are well-known starch-debranching enzymes widely used to hydrolyze α-1,6-glucosidic linkages in starch, pullulan, amylopectin, and other oligosaccharides, with application potentials in food, brewing, and pharmaceutical industries. Although extensive studies are done to discover and express pullulanases, only few are available with desirable characteristics for industrial applications. This raises the challenge to mine new enzyme sources, engineer proteins based on sequence/structure, and regulate expressions. We review here the identification of extremophilic and mesophilic microbes as sources of industrial pullulanases with desirable characteristics, including acid-resistance, thermostability, and psychrotrophism. We present current advances in site-directed mutagenesis and sequence/structure-guided protein engineering of pullulanases. In addition, we discuss heterologous expression of pullulanases in prokaryotic and eukaryotic microbial systems, and address the effectiveness of the expression elements and their regulation of enzyme production. Finally, we indicate future research needs to develop desired industrial pullulanases.

Discovery of a Thermostable GH10 Xylanase with Broad Substrate Specificity from the Arctic Mid-Ocean Ridge Vent System

A two-domain GH10 xylanase-encoding gene (amor_gh10a) was discovered from a metagenomic data set, generated after in situ incubation of a lignocellulosic substrate in hot sediments on the sea floor of the Arctic Mid-Ocean Ridge (AMOR). AMOR_GH10A comprises a signal peptide, a carbohydrate-binding module belonging to a previously uncharacterized family, and a catalytic glycosyl hydrolase (GH10) domain. The enzyme shares the highest sequence identity (42%) with a hypothetical protein from a Verrucomicrobia bacterium, and its GH10 domain shares low identity (24 to 28%) with functionally characterized xylanases. Purified AMOR_GH10A showed thermophilic and halophilic properties and was active toward various xylans. Uniquely, the enzyme showed high activity toward amorphous cellulose, glucomannan, and xyloglucan and was more active toward cellopentaose than toward xylopentaose. Binding assays showed that the N-terminal domain of this broad-specificity GH10 binds strongly to amorphous cellulose, as well as to microcrystalline cellulose, birchwood glucuronoxylan, barley β-glucan, and konjac glucomannan, confirming its classification as a novel CBM (CBM85).IMPORTANCE Hot springs at the sea bottom harbor unique biodiversity and are a promising source of enzymes with interesting properties. We describe the functional characterization of a thermophilic and halophilic multidomain xylanase originating from the Arctic Mid-Ocean Ridge vent system, belonging to the well-studied family 10 of glycosyl hydrolases (GH10). This xylanase, AMOR_GH10A, has a surprisingly wide substrate range and is more active toward cellopentaose than toward xylopentaose. This substrate promiscuity is unique for the GH10 family and could prove useful in industrial applications. Emphasizing the versatility of AMOR_GH10A, its N-terminal domain binds to both xylans and glycans, while not showing significant sequence similarities to any known carbohydrate-binding module (CBM) in the CAZy database. Thus, this N-terminal domain lays the foundation for the new CBM85 family.

An amylopullulanase (ApuNP1) from Geobacillus thermoleovorans NP1: biochemical characterization and its potential industrial applications

An amylopullulanase was produced by Geobacillus thermoleovorans NP1. The optimum enzyme production occurred at 45°C and pH 7.0 (12 hr). NP1 amylopullulanase (ApuNP1) exhibited the maximal activity at 50°C and pH 6.0 and was stable between 30-50°C, and pH 3.0-12.0 for 24 hr. The enzyme showed two bands with molecular weights of 112 and 107 kDa in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). The amylopullulanase retained 100% of its activity in the presence of 10 mM of Ca²⁺, Ba²⁺, Zn²⁺, Mg²⁺, Cu²⁺, EDTA, and PMSF. While the enzyme showed resistance to 5% of TritonX-100, Tween 20, and Tween 80, the activity was inhibited by 5% β-mercaptoethanol and H₂O₂. While the hydrolysis products of pullulan were maltose, maltotriose, and maltodextrin, the starch was hydrolyzed to maltose, maltotriose, and maltodextrin units. This shows that NP1 pullulanase is a type II pullulanase (amylopullulanase). After the liquefaction assay, 12% glucose content was measured with a refractometer in the presence of 20% starch. According to the wash performance tests, the mixture of ApuNP1 and 1% detergent removed almost all of the stains. This novel thermo-acidic amylopullulanase has a potency to be used in detergent, starch, food, baking, textile, and cosmetic industries.

Biotechnological applications of archaeal enzymes from extreme environments

To date, many industrial processes are performed using chemical compounds, which are harmful to nature. An alternative to overcome this problem is biocatalysis, which uses whole cells or enzymes to carry out chemical reactions in an environmentally friendly manner. Enzymes can be used as biocatalyst in food and feed, pharmaceutical, textile, detergent and beverage industries, among others. Since industrial processes require harsh reaction conditions to be performed, these enzymes must possess several characteristics that make them suitable for this purpose. Currently the best option is to use enzymes from extremophilic microorganisms, particularly archaea because of their special characteristics, such as stability to elevated temperatures, extremes of pH, organic solvents, and high ionic strength. Extremozymes, are being used in biotechnological industry and improved through modern technologies, such as protein engineering for best performance. Despite the wide distribution of archaea, exist only few reports about these microorganisms isolated from Antarctica and very little is known about thermophilic or hyperthermophilic archaeal enzymes particularly from Antarctica. This review summarizes current knowledge of archaeal enzymes with biotechnological applications, including two extremozymes from Antarctic archaea with potential industrial use, which are being studied in our laboratory. Both enzymes have been discovered through conventional screening and genome sequencing, respectively.

In silico analysis of the α-amylase family GH57: eventual subfamilies reflecting enzyme specificities

Glycoside hydrolases (GHs) have been classified in the CAZy database into 153 GH families. Currently, there might be four α-amylase families: the main family GH13, the family GH57 with related GH119 and, eventually, also GH126. The family GH57 was established in 1996 as the second and smaller α-amylase family. In addition to α-amylase, it contains 4-α-glucanotransferase, α-glucan branching enzyme, amylopullulanase, dual-specificity amylopullulanase–cyclomaltodextrinase, non-specified amylase, maltogenic amylase and α-galactosidase. The family GH57 enzymes employ the retaining reaction mechanism, share five typical conserved sequence regions and possess catalytic (β/α)₇-barrel succeeded by a four-helix bundle with the catalytic machinery consisting of catalytic nucleophile and proton donor (glutamic acid and aspartic acid at strands β4 and β7, respectively). The present bioinformatics study delivers a detailed sequence comparison of 1602 family GH57 sequences with the aim to highlight the uniqueness of each enzyme’s specificity and all eventual protein groups. This was achieved by creating the evolutionary tree focused on both the enzyme specificities and taxonomical origin. The substantial increase of numbers of sequences from recent comparisons done more than 5 years ago has allowed to refine the details of the sequence logos for the individual enzyme specificities. The study identifies a new evolutionary distinct group of α-galactosidase-related enzymes with until-now-undefined enzyme specificity but positioned on the evolutionary tree on a branch adjacent to α-galactosidases. The specificity of α-galactosidase is, moreover, the only one of the entire family GH57 for which there is no structural support for the proposal of the proton donor based on sequence analysis. The analysis also suggests a few so-called “like” protein groups related to some family GH57 enzyme specificities but lacking one or both catalytic residues.

Structure and function of α-glucan debranching enzymes

α-Glucan debranching enzymes hydrolyse α-1,6-linkages in starch/glycogen, thereby, playing a central role in energy metabolism in all living organisms. They belong to glycoside hydrolase families GH13 and GH57 and several of these enzymes are industrially important. Nine GH13 subfamilies include α-glucan debranching enzymes; isoamylase and glycogen debranching enzymes (GH13_11); pullulanase type I/limit dextrinase (GH13_12-14); pullulan hydrolase (GH13_20); bifunctional glycogen debranching enzyme (GH13_25); oligo-1 and glucan-1,6-α-glucosidases (GH13_31); pullulanase type II (GH13_39); and α-amylase domains (GH13_41) in two-domain amylase-pullulanases. GH57 harbours type II pullulanases. Specificity differences, domain organisation, carbohydrate binding modules, sequence motifs, three-dimensional structures and specificity determinants are discussed. The phylogenetic analysis indicated that GH13_39 enzymes could represent a "missing link" between the strictly α-1,6-specific debranching enzymes and the enzymes with dual specificity and α-1,4-linkage preference.

Disorder prediction-based construct optimization improves activity and catalytic efficiency of Bacillus naganoensis pullulanase

Pullulanase is a well-known starch-debranching enzyme. However, the production level of pullulanase is yet low in both wide-type strains and heterologous expression systems. We predicted the disorder propensities of Bacillus naganoensis pullulanase (PUL) using the bioinformatics tool, Disorder Prediction Meta-Server. On the basis of disorder prediction, eight constructs, including PULΔN5, PULΔN22, PULΔN45, PULΔN64, PULΔN78 and PULΔN106 by deleting the first 5, 22, 45, 64, 78 and 106 residues from the N-terminus, and PULΔC9 and PULΔC36 by deleting the last 9 and 36 residues from the C-terminus, were cloned into the recombinant expression vector pET-28a-PelB and auto-induced in Escherichia coli BL21 (DE3) cells. All constructs were evaluated in production level, specific activities and kinetic parameters. Both PULΔN5 and PULΔN106 gave higher production levels of protein than the wide type and displayed increased specific activities. Kinetic studies showed that substrate affinities of the mutants were improved in various degrees and the catalytic efficiency of PULΔN5, PULΔN45, PULΔN78, PULΔN106 and PULΔC9 were enhanced. However, the truncated mutations did not change the advantageous properties of the enzyme involving optimum temperature and pH for further application. Therefore, Disorder prediction-based truncation would be helpful to efficiently improve the enzyme activity and catalytic efficiency.

Purification and characterization of a novel extracellular halophilic and organic solvent-tolerant amylopullulanase from the haloarchaeon, Halorubrum sp. strain Ha25

A halophilic archaeon, Halorubrum sp. strain Ha25, produced extracellular halophilic organic solvent-tolerant amylopullulanase. The maximum enzyme production was at high salt concentration, 3-4 M NaCl. Optimum pH and temperature for enzyme production were 7.0 and 40 °C, respectively. Molecular mass of purified enzyme was estimated to be about 140 kDa by SDS-PAGE. This enzyme was active on pullulan and starch as substrates. The apparent Km for the enzyme activity on pullulan was 4 mg/ml and for soluble starch was 1.8 mg/ml. Optimum temperature for amylolytic and pullulytic activities was 50 °C. Optimum pH for amylolytic activity was 7 and for pullulytic activity was 7.5. This enzyme was active over a wide range of concentrations (0-4.5 M) of NaCl. The effect of organic solvents on the enzyme activities showed that this enzyme was more stable in the presence of non-polar organic solvents than polar solvents. This study is the first report on amylopullulanase production in halophilic bacteria and archaea.

α-Amylase: an enzyme specificity found in various families of glycoside hydrolases

α-Amylase (EC 3.2.1.1) represents the best known amylolytic enzyme. It catalyzes the hydrolysis of α-1,4-glucosidic bonds in starch and related α-glucans. In general, the α-amylase is an enzyme with a broad substrate preference and product specificity. In the sequence-based classification system of all carbohydrate-active enzymes, it is one of the most frequently occurring glycoside hydrolases (GH). α-Amylase is the main representative of family GH13, but it is probably also present in the families GH57 and GH119, and possibly even in GH126. Family GH13, known generally as the main α-amylase family, forms clan GH-H together with families GH70 and GH77 that, however, contain no α-amylase. Within the family GH13, the α-amylase specificity is currently present in several subfamilies, such as GH13_1, 5, 6, 7, 15, 24, 27, 28, 36, 37, and, possibly in a few more that are not yet defined. The α-amylases classified in family GH13 employ a reaction mechanism giving retention of configuration, share 4-7 conserved sequence regions (CSRs) and catalytic machinery, and adopt the (β/α)8-barrel catalytic domain. Although the family GH57 α-amylases also employ the retaining reaction mechanism, they possess their own five CSRs and catalytic machinery, and adopt a (β/α)7-barrel fold. These family GH57 attributes are likely to be characteristic of α-amylases from the family GH119, too. With regard to family GH126, confirmation of the unambiguous presence of the α-amylase specificity may need more biochemical investigation because of an obvious, but unexpected, homology with inverting β-glucan-active hydrolases.

Bioinformatic and biochemical analysis of a novel maltose-forming α-amylase of the GH57 family in the hyperthermophilic archaeon Thermococcus sp. CL1

Maltose-forming α-amylase is a glycoside hydrolase family 57 (GH57) member that is unique because it displays dual hydrolysis activity toward α-1,4- and α-1,6-glycosidic linkages and only recognizes maltose. This enzyme was previously identified only in Pyrococcus sp. ST04 (PSMA); however, we recently found two homologs subgroups in Thermococcus species. One subgroup (subgroup A) showed relatively high amino acid sequence similarity to PSMA (>71%), while the other subgroup (subgroup B) showed lower homology with PSMA (<59%). To characterize the subgroup B maltose-forming α-amylase from Thermococcus species (TCMA), we cloned the CL1_0868 gene from Thermococcus sp. CL1 and then successfully expressed the gene in Escherichia coli. Although TCMA has a different oligomeric state relative to PSMA, TCMA showed similar substrate specificity. However, TCMA was shown to hydrolyze maltooligosaccharides more easily than PSMA. Also, TCMA displayed different optimum conditions depending on the glycosidic linkage of the substrate. TCMA had the highest activity at 85°C and at pH 5.0 for α-1,4-glycosidic linkage hydrolysis whereas it showed its maximal activity to cleave α-1,6-glycosidic linkages at 98°C and pH 6.0.

High-level expression of Bacillus naganoensis pullulanase from recombinant Escherichia coli with auto-induction: effect of lac operator

Pullulanase plays an important role in specific hydrolysis of branch points in amylopectin and is generally employed as an important enzyme in starch-processing industry. So far, however, the production level of pullulanase is still somewhat low from wide-type strains and even heterologous expression systems. Here the gene encoding Bacillus naganoensis pullulanase was amplified and cloned. For expression of the protein, two recombinant systems, Escherichia coli BL21(DE3)/pET-20b(+)-pul and E. coli BL21(DE3)/pET-22b(+)-pul, were constructed, both bearing T7 promoter and signal peptide sequence, but different in the existance of lac operator and lacI gene encoding lac repressor. Recombinant pullulanase was initially expressed with the activity of up to 14 U/mL by E. coli BL21(DE3)/pET-20b(+)-pul with IPTG induction in LB medium, but its expression level reduced continually with the extension of cryopreservation time and basal expression was observed. However, E. coli BL21(DE3)/pET-22b(+)-pul , involving lac operator downstream of T7 promoter to regulate foreign gene transcription, exhibited pullulanase activity consistently without detected basal expression. By investigating the effect of lac operator, basal expression of foreign protein was found to cause expression instability and negative effect on production of target protein. Thus double-repression strategy was proposed that lac operators in both chromosome and plasmid were bound with lac repressor to repress T7 RNA polymerase synthesis and target protein expression before induction. Consequently, the total activity of pullulanase was remarkably increased to 580 U/mL with auto-induction by lac operator-involved E. coli BL21(DE3)/pET-22b(+)-pul. When adding 0.6% glycine in culture, the extracellular production of pullulanase was significantly improved with the extracellular activity of 502 U/mL, which is a relatively higher level achieved to date for extracellular production of pullulanase. The successful expression of pullulanase with lac operator regulation provides an efficient way for enhancement of expression stability and hence high-level production of target protein in recombinant E. coli.

Two potentially novel amylolytic enzyme specificities in the prokaryotic glycoside hydrolase α-amylase family GH57

Glycoside hydrolase (GH) family 57 consists of more than 900 proteins from Archaea (roughly one-quarter) and Bacteria (roughly three-quarters), mostly from thermophiles. Fewer than 20 GH57 members have already been biochemically characterized as real, (almost exclusively) amylolytic enzymes. In addition to a recently described dual-specificity amylopullulanase-cyclomaltodextrinase, five enzyme specificities have been well established in the family--α-amylase, amylopullulanase, branching enzyme, 4-α-glucanotransferase and α-galactosidase--plus a group of the so-called α-amylase-like homologues probably without the enzyme activity. A (β/α)7-barrel succeeded by a bundle of a few α-helices forming the catalytic domain, and five conserved sequence regions (CSRs), are the main characteristics of family GH57. The main goal of the present bioinformatics study was to describe two novel groups within family GH57 that represent potential non-specified amylases (127 sequences mostly from Bacteria) and maltogenic amylases (12 sequences from Archaea). These were collected from sequence databases based on an indication of their biochemical characterization. Although both the non-specified amylases and the maltogenic amylases share the in silico identified catalytic machinery and predicted fold with the experimentally determined GH57 members, the two novel groups may define new GH57 subfamilies. They are distinguishable from the other, previously recognized, subfamilies by specific sequence features present especially in their CSRs (the so-called sequence fingerprints), also reflecting their own evolutionary histories.

Maltose-forming α-amylase from the hyperthermophilic archaeon Pyrococcus sp. ST04

The deduced amino acid sequence from a gene of the hyperthermophilic archaeon Pyrococcus sp. ST04 (Py04_0872) contained a conserved glycoside hydrolase family 57 (GH57) motif, but showed <13% sequence identity with other known Pyrococcus GH57 enzymes, such as 4-α-glucanotransferase (EC 2.4.1.25), amylopullulanase (EC 3.2.1.41), and branching enzyme (EC 2.4.1.18). This gene was cloned and expressed in Escherichia coli, and the recombinant product (Pyrococcus sp. ST04 maltose-forming α-amylase, PSMA) was a novel 70-kDa maltose-forming α-amylase. PSMA only recognized maltose (G2) units with α-1,4 and α-1,6 linkages in polysaccharides (e.g., starch, amylopectin, and glycogen) and hydrolyzed pullulan very poorly. G2 was the primary end product of hydrolysis. Branched cyclodextrin (CD) was only hydrolyzed along its branched maltooligosaccharides. 6-O-glucosyl-β-cyclodextrin (G1-β-CD) and β-cyclodextrin (β-CD) were resistant to PSMA suggesting that PSMA is an exo-type glucan hydrolase with α-1,4- and α-1,6-glucan hydrolytic activities. The half-saturation value (Km) for the α-1,4 linkage of maltotriose (G3) was 8.4 mM while that of the α-1,6 linkage of 6-O-maltosyl-β-cyclodextrin (G2-β-CD) was 0.3 mM. The kcat values were 381.0 min(-1) for G3 and 1,545.0 min(-1) for G2-β-CD. The enzyme was inhibited competitively by the reaction product G2, and the Ki constant was 0.7 mM. PSMA bridges the gap between amylases that hydrolyze larger maltodextrins and α-glucosidase that feeds G2 into glycolysis by hydrolyzing smaller glucans into G2 units.

Sequence fingerprints of enzyme specificities from the glycoside hydrolase family GH57

The glycoside hydrolase family 57 (GH57) contains five well-established enzyme specificities: α-amylase, amylopullulanase, branching enzyme, 4-α-glucanotransferase and α-galactosidase. Around 700 GH57 members originate from Bacteria and Archaea, a substantial number being produced by thermophiles. An intriguing feature of family GH57 is that only slightly more than 2 % of its members (i.e., less than 20 enzymes) have already been biochemically characterized. The main goal of the present bioinformatics study was to retrieve from databases, and analyze in detail, sequences having clear features of the five GH57 enzyme specificities mentioned above. Of the 367 GH57 sequences, 56 were evaluated as α-amylases, 99 as amylopullulanases, 158 as branching enzymes, 46 as 4-α-glucanotransferases and 8 as α-galactosidases. Based on the analysis of collected sequences, sequence logos were created for each specificity and unique sequence features were identified within the logos. These features were proposed to define the so-called sequence fingerprints of GH57 enzyme specificities. Domain arrangements characteristic of the individual enzyme specificities as well as evolutionary relationships within the family GH57 are also discussed. The results of this study could find use in rational protein design of family GH57 amylolytic enzymes and also in the possibility of assigning a GH57 specificity to a hypothetical GH57 member prior to its biochemical characterization.

Effect of C-terminal truncation on enzyme properties of recombinant amylopullulanase from Thermoanaerobacter pseudoethanolicus

The smallest and enzymatically active molecule, TetApuQ818, was localized within the C-terminal Q818 amino acid residue after serial C-terminal truncation analysis of the recombinant amylopullulanase molecule (TetApuM955) from Thermoanaerobacter pseudoethanolicus. Kinetic analyses indicated that the overall catalytic efficiency, k (cat)/K (m), of TetApuQ818 was 8-32% decreased for the pullulan and the soluble starch substrate, respectively. Changes to the substrate affinity, K (m), and the turnover rate, k (cat), were decreased significantly in both enzymatic activities of TetApuQ818. TetApuQ818 exhibited less thermostability than TetApuM955 when the temperature was raised above 85°C, but it had similar substrate-binding ability and hydrolysis products toward various substrates as TetApuM955 did. Both enzymes showed similar spectroscopies of fluorescence and circular dichroism, suggesting the active folding conformation was maintained after this C-terminal Q818 deletion. This study suggested that the binding ability of insoluble starch by TetApuM955 did not rely on the putative C-terminal carbohydrate binding module family 20 (CBM20) and two FnIII regions of TetApu, though the integrity of the AamyC module of TetApuQ818 was required for the enzyme activity.